Kernel thread routine bch_writeback_thread() has the following code block,

447         down_write(&dc->writeback_lock);
448~450     if (check conditions) {
451                 up_write(&dc->writeback_lock);
452                 set_current_state(TASK_INTERRUPTIBLE);
453
454                 if (kthread_should_stop())
455                         return 0;
456
457                 schedule();
458                 continue;
459         }

If condition check is true, its task state is set to TASK_INTERRUPTIBLE
and call schedule() to wait for others to wake up it.

There are 2 issues in current code,
1, Task state is set to TASK_INTERRUPTIBLE after the condition checks, if
   another process changes the condition and call wake_up_process(dc->
   writeback_thread), then at line 452 task state is set back to
   TASK_INTERRUPTIBLE, the writeback kernel thread will lose a chance to be
   waken up.
2, At line 454 if kthread_should_stop() is true, writeback kernel thread
   will return to kernel/kthread.c:kthread() with TASK_INTERRUPTIBLE and
   call do_exit(). It is not good to enter do_exit() with task state
   TASK_INTERRUPTIBLE, in following code path might_sleep() is called and a
   warning message is reported by __might_sleep(): "WARNING: do not call
   blocking ops when !TASK_RUNNING; state=1 set at [xxxx]".

For the first issue, task state should be set before condition checks.
Ineed because dc->writeback_lock is required when modifying all the
conditions, calling set_current_state() inside code block where dc->
writeback_lock is hold is safe. But this is quite implicit, so I still move
set_current_state() before all the condition checks.

For the second issue, frankley speaking it does not hurt when kernel thread
exits with TASK_INTERRUPTIBLE state, but this warning message scares users,
makes them feel there might be something risky with bcache and hurt their
data.  Setting task state to TASK_RUNNING before returning fixes this
problem.

In alloc.c:allocator_wait(), there is also a similar issue, and is also
fixed in this patch.

Changelog:
v3: merge two similar fixes into one patch
v2: fix the race issue in v1 patch.
v1: initial buggy fix.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

After long time small writing I/O running, we found the occupancy of CPU
is very high and I/O performance has been reduced by about half:

[root@ceph151 internal]# top
top - 15:51:05 up 1 day,2:43,  4 users,  load average: 16.89, 15.15, 16.53
Tasks: 2063 total,   4 running, 2059 sleeping,   0 stopped,   0 zombie
%Cpu(s):4.3 us, 17.1 sy 0.0 ni, 66.1 id, 12.0 wa,  0.0 hi,  0.5 si,  0.0 st
KiB Mem : 65450044 total, 24586420 free, 38909008 used,  1954616 buff/cache
KiB Swap: 65667068 total, 65667068 free,        0 used. 25136812 avail Mem

  PID USER PR NI    VIRT    RES    SHR S %CPU %MEM     TIME+ COMMAND
 2023 root 20  0       0      0      0 S 55.1  0.0   0:04.42 kworker/11:191
14126 root 20  0       0      0      0 S 42.9  0.0   0:08.72 kworker/10:3
 9292 root 20  0       0      0      0 S 30.4  0.0   1:10.99 kworker/6:1
 8553 ceph 20  0 4242492 1.805g  18804 S 30.0  2.9 410:07.04 ceph-osd
12287 root 20  0       0      0      0 S 26.7  0.0   0:28.13 kworker/7:85
31019 root 20  0       0      0      0 S 26.1  0.0   1:30.79 kworker/22:1
 1787 root 20  0       0      0      0 R 25.7  0.0   5:18.45 kworker/8:7
32169 root 20  0       0      0      0 S 14.5  0.0   1:01.92 kworker/23:1
21476 root 20  0       0      0      0 S 13.9  0.0   0:05.09 kworker/1:54
 2204 root 20  0       0      0      0 S 12.5  0.0   1:25.17 kworker/9:10
16994 root 20  0       0      0      0 S 12.2  0.0   0:06.27 kworker/5:106
15714 root 20  0       0      0      0 R 10.9  0.0   0:01.85 kworker/19:2
 9661 ceph 20  0 4246876 1.731g  18800 S 10.6  2.8 403:00.80 ceph-osd
11460 ceph 20  0 4164692 2.206g  18876 S 10.6  3.5 360:27.19 ceph-osd
 9960 root 20  0       0      0      0 S 10.2  0.0   0:02.75 kworker/2:139
11699 ceph 20  0 4169244 1.920g  18920 S 10.2  3.1 355:23.67 ceph-osd
 6843 ceph 20  0 4197632 1.810g  18900 S  9.6  2.9 380:08.30 ceph-osd

The kernel work consumed a lot of CPU, and I found they are running journal
work, The journal is reclaiming source and flush btree node with surprising
frequency.

Through further analysis, we found that in btree_flush_write(), we try to
get a btree node with the smallest fifo idex to flush by traverse all the
btree nodein c->bucket_hash, after we getting it, since no locker protects
it, this btree node may have been written to cache device by other works,
and if this occurred, we retry to traverse in c->bucket_hash and get
another btree node. When the problem occurrd, the retry times is very high,
and we consume a lot of CPU in looking for a appropriate btree node.

In this patch, we try to record 128 btree nodes with the smallest fifo idex
in heap, and pop one by one when we need to flush btree node. It greatly
reduces the time for the loop to find the appropriate BTREE node, and also
reduce the occupancy of CPU.

[note by mpl: this triggers a checkpatch error because of adjacent,
pre-existing style violations]
Signed-off-by: NTang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Sometimes, Journal takes up a lot of CPU, we need statistics
to know what's the journal is doing. So this patch provide
some journal statistics:
1) reclaim: how many times the journal try to reclaim resource,
   usually the journal bucket or/and the pin are exhausted.
2) flush_write: how many times the journal try to flush btree node
   to cache device, usually the journal bucket are exhausted.
3) retry_flush_write: how many times the journal retry to flush
   the next btree node, usually the previous tree node have been
   flushed by other thread.
we show these statistic by sysfs interface. Through these statistics
We can totally see the status of journal module when the CPU is too
high.
Signed-off-by: NTang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The classic error injection mechanism, should_fail_request() does not
support use cases where more information is required (from the entire
struct bio, for example).

To that end, this patch introduces should_fail_bio(), which calls
should_fail_request() under the hood but provides a convenient
place for kprobes to hook into if they require the entire struct bio.
This patch also replaces some existing calls to should_fail_request()
with should_fail_bio() with no degradation in performance.
Signed-off-by: NHoward McLauchlan <hmclauchlan@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Mikulas reported a workload that saw bad performance, and figured
out what it was due to various other types of requests being
accounted as reads. Flush requests, for instance. Due to the
high latency of those, we heavily throttle the writes to keep
the latencies in balance. But they really should be accounted
as writes.

Fix this by checking the exact type of the request. If it's a
read, account as a read, if it's a write or a flush, account
as a write. Any other request we disregard. Previously everything
would have been mistakenly accounted as reads.
Reported-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull media updates from Mauro Carvalho Chehab:

 - videobuf2 was moved to a media/common dir, as it is now used by the
   DVB subsystem too

 - Digital TV core memory mapped support interface

 - new sensor driver: ov7740

 - several improvements at ddbridge driver

 - new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel
   SoCs

 - new tuner driver: tda18250

 - finally got rid of all LIRC staging drivers

 - as we don't have old lirc drivers anymore, restruct the lirc device
   code

 - add support for UVC metadata

 - add a new staging driver for NVIDIA Tegra Video Decoder Engine

 - DVB kAPI headers moved to include/media

 - synchronize the kAPI and uAPI for the DVB subsystem, removing the gap
   for non-legacy APIs

 - reduce the kAPI gap for V4L2

 - lots of other driver enhancements, cleanups, etc.

* tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits)
  media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs
  media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic
  media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors
  media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type
  media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32
  media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer
  media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32
  media: v4l2-compat-ioctl32.c: avoid sizeof(type)
  media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32
  media: v4l2-compat-ioctl32.c: fix the indentation
  media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF
  media: v4l2-ioctl.c: don't copy back the result for -ENOTTY
  media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt
  media: vivid: fix module load error when enabling fb and no_error_inj=1
  media: dvb_demux: improve debug messages
  media: dvb_demux: Better handle discontinuity errors
  media: cxusb, dib0700: ignore XC2028_I2C_FLUSH
  media: ts2020: avoid integer overflows on 32 bit machines
  media: i2c: ov7740: use gpio/consumer.h instead of gpio.h
  media: entity: Add a nop variant of media_entity_cleanup
  ...

Pull more rdma updates from Doug Ledford:
 "Items of note:

   - two patches fix a regression in the 4.15 kernel. The 4.14 kernel
     worked fine with NVMe over Fabrics and mlx5 adapters. That broke in
     4.15. The fix is here.

   - one of the patches (the endian notation patch from Lijun) looks
     like a lot of lines of change, but it's mostly mechanical in
     nature. It amounts to the biggest chunk of change in it (it's about
     2/3rds of the overall pull request).

  Summary:

   - Clean up some function signatures in rxe for clarity

   - Tidy the RDMA netlink header to remove unimplemented constants

   - bnxt_re driver fixes, one is a regression this window.

   - Minor hns driver fixes

   - Various fixes from Dan Carpenter and his tool

   - Fix IRQ cleanup race in HFI1

   - HF1 performance optimizations and a fix to report counters in the right units

   - Fix for an IPoIB startup sequence race with the external manager

   - Oops fix for the new kabi path

   - Endian cleanups for hns

   - Fix for mlx5 related to the new automatic affinity support"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (38 commits)
  net/mlx5: increase async EQ to avoid EQ overrun
  mlx5: fix mlx5_get_vector_affinity to start from completion vector 0
  RDMA/hns: Fix the endian problem for hns
  IB/uverbs: Use the standard kConfig format for experimental
  IB: Update references to libibverbs
  IB/hfi1: Add 16B rcvhdr trace support
  IB/hfi1: Convert kzalloc_node and kcalloc to use kcalloc_node
  IB/core: Avoid a potential OOPs for an unused optional parameter
  IB/core: Map iWarp AH type to undefined in rdma_ah_find_type
  IB/ipoib: Fix for potential no-carrier state
  IB/hfi1: Show fault stats in both TX and RX directions
  IB/hfi1: Remove blind constants from 16B update
  IB/hfi1: Convert PortXmitWait/PortVLXmitWait counters to flit times
  IB/hfi1: Do not override given pcie_pset value
  IB/hfi1: Optimize process_receive_ib()
  IB/hfi1: Remove unnecessary fecn and becn fields
  IB/hfi1: Look up ibport using a pointer in receive path
  IB/hfi1: Optimize packet type comparison using 9B and bypass code paths
  IB/hfi1: Compute BTH only for RDMA_WRITE_LAST/SEND_LAST packet
  IB/hfi1: Remove dependence on qp->s_hdrwords
  ...

Pull libnvdimm updates from Ross Zwisler:

 - Require struct page by default for filesystem DAX to remove a number
   of surprising failure cases. This includes failures with direct I/O,
   gdb and fork(2).

 - Add support for the new Platform Capabilities Structure added to the
   NFIT in ACPI 6.2a. This new table tells us whether the platform
   supports flushing of CPU and memory controller caches on unexpected
   power loss events.

 - Revamp vmem_altmap and dev_pagemap handling to clean up code and
   better support future future PCI P2P uses.

 - Deprecate the ND_IOCTL_SMART_THRESHOLD command whose payload has
   become out-of-sync with recent versions of the NVDIMM_FAMILY_INTEL
   spec, and instead rely on the generic ND_CMD_CALL approach used by
   the two other IOCTL families, NVDIMM_FAMILY_{HPE,MSFT}.

 - Enhance nfit_test so we can test some of the new things added in
   version 1.6 of the DSM specification. This includes testing firmware
   download and simulating the Last Shutdown State (LSS) status.

* tag 'libnvdimm-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (37 commits)
  libnvdimm, namespace: remove redundant initialization of 'nd_mapping'
  acpi, nfit: fix register dimm error handling
  libnvdimm, namespace: make min namespace size 4K
  tools/testing/nvdimm: force nfit_test to depend on instrumented modules
  libnvdimm/nfit_test: adding support for unit testing enable LSS status
  libnvdimm/nfit_test: add firmware download emulation
  nfit-test: Add platform cap support from ACPI 6.2a to test
  libnvdimm: expose platform persistence attribute for nd_region
  acpi: nfit: add persistent memory control flag for nd_region
  acpi: nfit: Add support for detect platform CPU cache flush on power loss
  device-dax: Fix trailing semicolon
  libnvdimm, btt: fix uninitialized err_lock
  dax: require 'struct page' by default for filesystem dax
  ext2: auto disable dax instead of failing mount
  ext4: auto disable dax instead of failing mount
  mm, dax: introduce pfn_t_special()
  mm: Fix devm_memremap_pages() collision handling
  mm: Fix memory size alignment in devm_memremap_pages_release()
  memremap: merge find_dev_pagemap into get_dev_pagemap
  memremap: change devm_memremap_pages interface to use struct dev_pagemap
  ...

Pull PCI updates from Bjorn Helgaas:

 - skip AER driver error recovery callbacks for correctable errors
   reported via ACPI APEI, as we already do for errors reported via the
   native path (Tyler Baicar)

 - fix DPC shared interrupt handling (Alex Williamson)

 - print full DPC interrupt number (Keith Busch)

 - enable DPC only if AER is available (Keith Busch)

 - simplify DPC code (Bjorn Helgaas)

 - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
   Helgaas)

 - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
   Helgaas)

 - move ASPM internal interfaces out of public header (Bjorn Helgaas)

 - allow hot-removal of VGA devices (Mika Westerberg)

 - speed up unplug and shutdown by assuming Thunderbolt controllers
   don't support Command Completed events (Lukas Wunner)

 - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
   Jay Cornwall)

 - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)

 - clean up PCI DMA interface usage (Christoph Hellwig)

 - remove PCI pool API (replaced with DMA pool) (Romain Perier)

 - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
   Kaya)

 - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)

 - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)

 - remove warnings on sysfs mmap failure (Bjorn Helgaas)

 - quiet ROM validation messages (Alex Deucher)

 - remove redundant memory alloc failure messages (Markus Elfring)

 - fill in types for compile-time VGA and other I/O port resources
   (Bjorn Helgaas)

 - make "pci=pcie_scan_all" work for Root Ports as well as Downstream
   Ports to help AmigaOne X1000 (Bjorn Helgaas)

 - add SPDX tags to all PCI files (Bjorn Helgaas)

 - quirk Marvell 9128 DMA aliases (Alex Williamson)

 - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)

 - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
   Cassel)

 - use DMA API to get MSI address for DesignWare IP (Niklas Cassel)

 - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)

 - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)

 - add support for ARTPEC-7 SoC (Niklas Cassel)

 - add endpoint-mode support for ARTPEC (Niklas Cassel)

 - add Cadence PCIe host and endpoint controller driver (Cyrille
   Pitchen)

 - handle multiple INTx status bits being set in dra7xx (Vignesh R)

 - translate dra7xx hwirq range to fix INTD handling (Vignesh R)

 - remove deprecated Exynos PHY initialization code (Jaehoon Chung)

 - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)

 - fix NULL pointer dereference in iProc BCMA driver (Ray Jui)

 - fix Keystone interrupt-controller-node lookup (Johan Hovold)

 - constify qcom driver structures (Julia Lawall)

 - rework Tegra config space mapping to increase space available for
   endpoints (Vidya Sagar)

 - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)

 - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)

 - add support for Global Fabric Manager Server (GFMS) event to
   Microsemi Switchtec switch driver (Logan Gunthorpe)

 - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)

* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
  PCI: endpoint: Fix EPF device name to support multi-function devices
  PCI: endpoint: Add the function number as argument to EPC ops
  PCI: cadence: Add host driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
  PCI: Add vendor ID for Cadence
  PCI: Add generic function to probe PCI host controllers
  PCI: generic: fix missing call of pci_free_resource_list()
  PCI: OF: Add generic function to parse and allocate PCI resources
  PCI: Regroup all PCI related entries into drivers/pci/Makefile
  PCI/DPC: Reformat DPC register definitions
  PCI/DPC: Add and use DPC Status register field definitions
  PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
  PCI/DPC: Remove unnecessary RP PIO register structs
  PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
  PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
  PCI/DPC: Make RP PIO log size check more generic
  PCI/DPC: Rename local "status" to "dpc_status"
  PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
  ...

Pull more xfs updates from Darrick Wong:
 "As promised, here's a (much smaller) second pull request for the
  second week of the merge cycle. This time around we have a couple
  patches shutting off unsupported fs configurations, and a couple of
  cleanups.

  Last, we turn off EXPERIMENTAL for the reverse mapping btree, since
  the primary downstream user of that information (online fsck) is now
  upstream and I haven't seen any major failures in a few kernel
  releases.

  Summary:

   - Print scrub build status in the xfs build info.

   - Explicitly call out the remaining two scenarios where we don't
     support reflink and never have.

   - Remove EXPERIMENTAL tag from reverse mapping btree!"

* tag 'xfs-4.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove experimental tag for reverse mapping
  xfs: don't allow reflink + realtime filesystems
  xfs: don't allow DAX on reflink filesystems
  xfs: add scrub to XFS_BUILD_OPTIONS
  xfs: fix u32 type usage in sb validation function

Pull overlayfs updates from Miklos Szeredi:
 "This work from Amir adds NFS export capability to overlayfs. NFS
  exporting an overlay filesystem is a challange because we want to keep
  track of any copy-up of a file or directory between encoding the file
  handle and decoding it.

  This is achieved by indexing copied up objects by lower layer file
  handle. The index is already used for hard links, this patchset
  extends the use to NFS file handle decoding"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (51 commits)
  ovl: check ERR_PTR() return value from ovl_encode_fh()
  ovl: fix regression in fsnotify of overlay merge dir
  ovl: wire up NFS export operations
  ovl: lookup indexed ancestor of lower dir
  ovl: lookup connected ancestor of dir in inode cache
  ovl: hash non-indexed dir by upper inode for NFS export
  ovl: decode pure lower dir file handles
  ovl: decode indexed dir file handles
  ovl: decode lower file handles of unlinked but open files
  ovl: decode indexed non-dir file handles
  ovl: decode lower non-dir file handles
  ovl: encode lower file handles
  ovl: copy up before encoding non-connectable dir file handle
  ovl: encode non-indexed upper file handles
  ovl: decode connected upper dir file handles
  ovl: decode pure upper file handles
  ovl: encode pure upper file handles
  ovl: document NFS export
  vfs: factor out helpers d_instantiate_anon() and d_alloc_anon()
  ovl: store 'has_upper' and 'opaque' as bit flags
  ...

Pull remoteproc updates from Bjorn Andersson:
 "This contains a few bug fixes and a cleanup up of the resource-table
  handling in the framework, which removes the need for drivers with no
  resource table to provide a fake one"

* tag 'rproc-v4.16' of git://github.com/andersson/remoteproc:
  remoteproc: Reset table_ptr on stop
  remoteproc: Drop dangling find_rsc_table dummies
  remoteproc: Move resource table load logic to find
  remoteproc: Don't handle empty resource table
  remoteproc: Merge rproc_ops and rproc_fw_ops
  remoteproc: Clone rproc_ops in rproc_alloc()
  remoteproc: Cache resource table size
  remoteproc: Remove depricated crash completion
  virtio_remoteproc: correct put_device virtio_device.dev

Pull rpmsg updates from Bjorn Andersson:
 "This fixes a few issues found in the SMD and GLINK drivers and
  corrects the handling of SMD channels that are found in an
  (previously) unexpected state"

* tag 'rpmsg-v4.16' of git://github.com/andersson/remoteproc:
  rpmsg: smd: Fix double unlock in __qcom_smd_send()
  rpmsg: glink: Fix missing mutex_init() in qcom_glink_alloc_channel()
  rpmsg: smd: Don't hold the tx lock during wait
  rpmsg: smd: Fail send on a closed channel
  rpmsg: smd: Wake up all waiters
  rpmsg: smd: Create device for all channels
  rpmsg: smd: Perform handshake during open
  rpmsg: glink: smem: Ensure ordering during tx
  drivers: rpmsg: remove duplicate includes
  remoteproc: qcom: Use PTR_ERR_OR_ZERO() in glink prob

Pull MMC host fixes from Ulf Hansson:

 - renesas_sdhi: Fix build error in case NO_DMA=y

 - sdhci: Implement a bounce buffer to address throughput regressions

* tag 'mmc-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: MMC_SDHI_{SYS,INTERNAL}_DMAC should depend on HAS_DMA
  mmc: sdhci: Implement an SDHCI-specific bounce buffer

Merge tag 'pwm/for-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The Meson PWM controller driver gains support for the AXG series and a
  minor bug is fixed for the STMPE driver.

  To round things off, the class is now set for PWM channels exported
  via sysfs which allows non-root access, provided that the system has
  been configured accordingly"

* tag 'pwm/for-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: meson: Add clock source configuration for Meson-AXG
  dt-bindings: pwm: Update bindings for the Meson-AXG
  pwm: stmpe: Fix wrong register offset for hwpwm=2 case
  pwm: Set class for exported channels in sysfs

The Mediatek ethernet driver fails to build after commit 23c35f48
("pinctrl: remove include file from <linux/device.h>") because it relies
on the pinctrl/consumer.h and pinctrl/devinfo.h being pulled in by the
device.h header implicitly.

Include these headers explicitly to avoid the build failure.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Meson GX MMC driver fails to build after commit 23c35f48
("pinctrl: remove include file from <linux/device.h>") because it relies
on the pinctrl/consumer.h being pulled in by the device.h header
implicitly.

Include the header explicitly to avoid the build failure.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Rockchip LVDS driver fails to build after commit 23c35f48
("pinctrl: remove include file from <linux/device.h>") because it relies
on the pinctrl/consumer.h and pinctrl/devinfo.h being pulled in by the
device.h header implicitly.

Include these headers explicitly to avoid the build failure.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes: 23c35f48 ("pinctrl: remove include file from <linux/device.h>")
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently the async EQ has 256 entries only. It might not be big enough
for the SW to handle all the needed pending events. For example, in case
of many QPs (let's say 1024) connected to a SRQ created using NVMeOF target
and the target goes down, the FW will raise 1024 "last WQE reached" events
and may cause EQ overrun. Increase the EQ to more reasonable size, that beyond
it the FW should be able to delay the event and raise it later on using internal
backpressure mechanism.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The consumers of this routine expects the affinity map of of vector
index relative to the first completion vector. The upper layers are
not aware of internal/private completion vectors that mlx5 allocates
for its own usage.

Hence, return the affinity map of vector index relative to the first
completion vector.

Fixes: 05e0cc84 ("net/mlx5: Fix get vector affinity helper function")
Reported-by: NLogan Gunthorpe <logang@deltatee.com>
Tested-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Cc: <stable@vger.kernel.org> # v4.15
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The hip06 and hip08 run on a little endian ARM, it needs to
revise the annotations to indicate that the HW uses little
endian data in the various DMA buffers, and flow the necessary
swaps throughout.

The imm_data use big endian mode. The cpu_to_le32/le32_to_cpu
swaps are no-op for this, which makes the only substantive
change the handling of imm_data which is now mandatory swapped.

This also keep match with the userspace hns driver and resolve
the warning by sparse.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Another fix for an issue reported by 0-day robot.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: 8ed5eec9 ("ovl: encode pure upper file handles")
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

A re-factoring patch in NFS export series has passed the wrong argument
to ovl_get_inode() causing a regression in the very recent fix to
fsnotify of overlay merge dir.

The regression has caused merge directory inodes to be hashed by upper
instead of lower real inode, when NFS export and directory indexing is
disabled. That caused an inotify watch to become obsolete after directory
copy up and drop caches.

LTP test inotify07 was improved to catch this regression.
The regression also caused multiple redirect dirs to same origin not to
be detected on lookup with NFS export disabled. An xfstest was added to
cover this case.

Fixes: 0aceb53e ("ovl: do not pass overlay dentry to ovl_get_inode()")
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Pull spectre/meltdown updates from Thomas Gleixner:
 "The next round of updates related to melted spectrum:

   - The initial set of spectre V1 mitigations:

       - Array index speculation blocker and its usage for syscall,
         fdtable and the n180211 driver.

       - Speculation barrier and its usage in user access functions

   - Make indirect calls in KVM speculation safe

   - Blacklisting of known to be broken microcodes so IPBP/IBSR are not
     touched.

   - The initial IBPB support and its usage in context switch

   - The exposure of the new speculation MSRs to KVM guests.

   - A fix for a regression in x86/32 related to the cpu entry area

   - Proper whitelisting for known to be safe CPUs from the mitigations.

   - objtool fixes to deal proper with retpolines and alternatives

   - Exclude __init functions from retpolines which speeds up the boot
     process.

   - Removal of the syscall64 fast path and related cleanups and
     simplifications

   - Removal of the unpatched paravirt mode which is yet another source
     of indirect unproteced calls.

   - A new and undisputed version of the module mismatch warning

   - A couple of cleanup and correctness fixes all over the place

  Yet another step towards full mitigation. There are a few things still
  missing like the RBS underflow mitigation for Skylake and other small
  details, but that's being worked on.

  That said, I'm taking a belated christmas vacation for a week and hope
  that everything is magically solved when I'm back on Feb 12th"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  KVM/SVM: Allow direct access to MSR_IA32_SPEC_CTRL
  KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL
  KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIES
  KVM/x86: Add IBPB support
  KVM/x86: Update the reverse_cpuid list to include CPUID_7_EDX
  x86/speculation: Fix typo IBRS_ATT, which should be IBRS_ALL
  x86/pti: Mark constant arrays as __initconst
  x86/spectre: Simplify spectre_v2 command line parsing
  x86/retpoline: Avoid retpolines for built-in __init functions
  x86/kvm: Update spectre-v1 mitigation
  KVM: VMX: make MSR bitmaps per-VCPU
  x86/paravirt: Remove 'noreplace-paravirt' cmdline option
  x86/speculation: Use Indirect Branch Prediction Barrier in context switch
  x86/cpuid: Fix up "virtual" IBRS/IBPB/STIBP feature bits on Intel
  x86/spectre: Fix spelling mistake: "vunerable"-> "vulnerable"
  x86/spectre: Report get_user mitigation for spectre_v1
  nl80211: Sanitize array index in parse_txq_params
  vfs, fdtable: Prevent bounds-check bypass via speculative execution
  x86/syscall: Sanitize syscall table de-references under speculation
  x86/get_user: Use pointer masking to limit speculation
  ...

Pull x86 fixes from Thomas Gleixner:
 "A small set of changes:

   - a fixup for kexec related to 5-level paging mode. That covers most
     of the cases except kexec from a 5-level kernel to a 4-level
     kernel. The latter needs more work and is going to come in 4.17

   - two trivial fixes for build warnings triggered by LTO and gcc-8"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/power: Fix swsusp_arch_resume prototype
  x86/dumpstack: Avoid uninitlized variable
  x86/kexec: Make kexec (mostly) work in 5-level paging mode

Pull irq fixes from Thomas Gleixner:
 "Two small changes:

   - a fix for a interrupt regression caused by the vector management
     changes in 4.15 affecting museum pieces which rely on interrupt
     probing for legacy (e.g. parallel port) devices.

     One of the startup calls in the autoprobe code was not changed to
     the new activate_and_startup() function resulting in a warning and
     as a consequence failing to discover the device interrupt.

   - a trivial update to the copyright/license header of the STM32 irq
     chip driver"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Make legacy autoprobing work again
  irqchip/stm32: Fix copyright

Pull more block updates from Jens Axboe:
 "Most of this is fixes and not new code/features:

   - skd fix from Arnd, fixing a build error dependent on sla allocator
     type.

   - blk-mq scheduler discard merging fixes, one from me and one from
     Keith. This fixes a segment miscalculation for blk-mq-sched, where
     we mistakenly think two segments are physically contigious even
     though the request isn't carrying real data. Also fixes a bio-to-rq
     merge case.

   - Don't re-set a bit on the buffer_head flags, if it's already set.
     This can cause scalability concerns on bigger machines and
     workloads. From Kemi Wang.

   - Add BLK_STS_DEV_RESOURCE return value to blk-mq, allowing us to
     distuingish between a local (device related) resource starvation
     and a global one. The latter might happen without IO being in
     flight, so it has to be handled a bit differently. From Ming"

* tag 'for-linus-20180204' of git://git.kernel.dk/linux-block:
  block: skd: fix incorrect linux/slab_def.h inclusion
  buffer: Avoid setting buffer bits that are already set
  blk-mq-sched: Enable merging discard bio into request
  blk-mq: fix discard merge with scheduler attached
  blk-mq: introduce BLK_STS_DEV_RESOURCE

Pull NTB updates from Jon Mason:
 "Bug fixes galore, removal of the ntb atom driver, and updates to the
  ntb tools and tests to support the multi-port interface"

* tag 'ntb-4.16' of git://github.com/jonmason/ntb: (37 commits)
  NTB: ntb_perf: fix cast to restricted __le32
  ntb_perf: Fix an error code in perf_copy_chunk()
  ntb_hw_switchtec: Make function switchtec_ntb_remove() static
  NTB: ntb_tool: fix memory leak on 'buf' on error exit path
  NTB: ntb_perf: fix printing of resource_size_t
  NTB: ntb_hw_idt: Set NTB_TOPO_SWITCH topology
  NTB: ntb_test: Update ntb_perf tests
  NTB: ntb_test: Update ntb_tool MW tests
  NTB: ntb_test: Add ntb_tool Message tests
  NTB: ntb_test: Update ntb_tool Scratchpad tests
  NTB: ntb_test: Update ntb_tool DB tests
  NTB: ntb_test: Update ntb_tool link tests
  NTB: ntb_test: Add ntb_tool port tests
  NTB: ntb_test: Safely use paths with whitespace
  NTB: ntb_perf: Add full multi-port NTB API support
  NTB: ntb_tool: Add full multi-port NTB API support
  NTB: ntb_pp: Add full multi-port NTB API support
  NTB: Fix UB/bug in ntb_mw_get_align()
  NTB: Set dma mask and dma coherent mask to NTB devices
  NTB: Rename NTB messaging API methods
  ...

Pull mailbox updates from Jassi Brar:
 "Misc driver changes only:

   - TI-MsgMgr: Fix print format for a printk

   - TI-MSgMgr: SPDX license switch for the driver

   - QCOM-IPC: Convert driver to use regmap

   - QCOM-IPC: Spawn sibling clock device from mailbox driver"

* tag 'mailbox-v4.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: qcom: Document the APCS clock binding
  mailbox: qcom: Create APCS child device for clock controller
  mailbox: qcom: Convert APCS IPC driver to use regmap
  mailbox: ti-msgmgr: Use %zu for size_t print format
  mailbox: ti-msgmgr: Switch to SPDX Licensing

Pull i2c updates from Wolfram Sang:
 "I2C has the following changes for you:

   - new flag to mark DMA safe buffers in i2c_msg. Also, some
     infrastructure around it. And docs.

   - huge refactoring of the at24 driver led by the new maintainer
     Bartosz

   - update I2C bus recovery to send STOP after recovery

   - conversion from gpio to gpiod for I2C bus recovery

   - adding a fault-injector to the i2c-gpio driver

   - lots of small driver improvements, and bigger ones to
     i2c-sh_mobile"

* 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits)
  i2c: mv64xxx: Add myself as maintainer for this driver
  i2c: mv64xxx: Fix clock resource by adding an optional bus clock
  i2c: mv64xxx: Remove useless test before clk_disable_unprepare
  i2c: mxs: use true and false for boolean values
  i2c: meson: update doc description to fix build warnings
  i2c: meson: add configurable divider factors
  dt-bindings: i2c: update documentation for the Meson-AXG
  i2c: imx-lpi2c: add runtime pm support
  i2c: rcar: fix some trivial typos in comments
  i2c: davinci: fix the cpufreq transition
  i2c: rk3x: add proper kerneldoc header
  i2c: rk3x: account for const type of of_device_id.data
  i2c: acorn: remove outdated path from file header
  i2c: acorn: add MODULE_LICENSE tag
  i2c: rcar: implement bus recovery
  i2c: send STOP after successful bus recovery
  i2c: ensure SDA is released in recovery if SDA is controllable
  i2c: add 'set_sda' to bus_recovery_info
  i2c: add identifier in declarations for i2c_bus_recovery
  i2c: make kerneldoc about bus recovery more precise
  ...

Pull fscrypt updates from Ted Ts'o:
 "Refactor support for encrypted symlinks to move common code to fscrypt"

Ted also points out about the merge:
 "This makes the f2fs symlink code use the fscrypt_encrypt_symlink()
  from the fscrypt tree. This will end up dropping the kzalloc() ->
  f2fs_kzalloc() change, which means the fscrypt-specific allocation
  won't get tested by f2fs's kmalloc error injection system; which is
  fine"

* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: (26 commits)
  fscrypt: fix build with pre-4.6 gcc versions
  fscrypt: remove 'ci' parameter from fscrypt_put_encryption_info()
  fscrypt: document symlink length restriction
  fscrypt: fix up fscrypt_fname_encrypted_size() for internal use
  fscrypt: define fscrypt_fname_alloc_buffer() to be for presented names
  fscrypt: calculate NUL-padding length in one place only
  fscrypt: move fscrypt_symlink_data to fscrypt_private.h
  fscrypt: remove fscrypt_fname_usr_to_disk()
  ubifs: switch to fscrypt_get_symlink()
  ubifs: switch to fscrypt ->symlink() helper functions
  ubifs: free the encrypted symlink target
  f2fs: switch to fscrypt_get_symlink()
  f2fs: switch to fscrypt ->symlink() helper functions
  ext4: switch to fscrypt_get_symlink()
  ext4: switch to fscrypt ->symlink() helper functions
  fscrypt: new helper function - fscrypt_get_symlink()
  fscrypt: new helper functions for ->symlink()
  fscrypt: trim down fscrypt.h includes
  fscrypt: move fscrypt_is_dot_dotdot() to fs/crypto/fname.c
  fscrypt: move fscrypt_valid_enc_modes() to fscrypt_private.h
  ...

We really don't want people turning this on just yet, make it very
clear with capital letters.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

These days the userspace comes from rdma-core, revise references
in the kernel to point to the current repository.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Update the binding documentation for APCS to mention that the APCS
hardware block also expose a clock controller functionality.

The APCS clock controller is a mux and half-integer divider. It has the
main CPU PLL as an input and provides the clock for the application CPU.
Signed-off-by: NGeorgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>

There is a clock controller functionality provided by the APCS hardware
block of msm8916 devices. The device-tree would represent an APCS node
with both mailbox and clock provider properties.
Create a platform child device for the clock controller functionality so
the driver can probe and use APCS as parent.
Signed-off-by: NGeorgi Djakov <georgi.djakov@linaro.org>
Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>

This hardware block provides more functionalities that just IPC. Convert
it to regmap to allow other child platform devices to use the same regmap.
Signed-off-by: NGeorgi Djakov <georgi.djakov@linaro.org>
Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>

Pull hardened usercopy whitelisting from Kees Cook:
 "Currently, hardened usercopy performs dynamic bounds checking on slab
  cache objects. This is good, but still leaves a lot of kernel memory
  available to be copied to/from userspace in the face of bugs.

  To further restrict what memory is available for copying, this creates
  a way to whitelist specific areas of a given slab cache object for
  copying to/from userspace, allowing much finer granularity of access
  control.

  Slab caches that are never exposed to userspace can declare no
  whitelist for their objects, thereby keeping them unavailable to
  userspace via dynamic copy operations. (Note, an implicit form of
  whitelisting is the use of constant sizes in usercopy operations and
  get_user()/put_user(); these bypass all hardened usercopy checks since
  these sizes cannot change at runtime.)

  This new check is WARN-by-default, so any mistakes can be found over
  the next several releases without breaking anyone's system.

  The series has roughly the following sections:
   - remove %p and improve reporting with offset
   - prepare infrastructure and whitelist kmalloc
   - update VFS subsystem with whitelists
   - update SCSI subsystem with whitelists
   - update network subsystem with whitelists
   - update process memory with whitelists
   - update per-architecture thread_struct with whitelists
   - update KVM with whitelists and fix ioctl bug
   - mark all other allocations as not whitelisted
   - update lkdtm for more sensible test overage"

* tag 'usercopy-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (38 commits)
  lkdtm: Update usercopy tests for whitelisting
  usercopy: Restrict non-usercopy caches to size 0
  kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl
  kvm: whitelist struct kvm_vcpu_arch
  arm: Implement thread_struct whitelist for hardened usercopy
  arm64: Implement thread_struct whitelist for hardened usercopy
  x86: Implement thread_struct whitelist for hardened usercopy
  fork: Provide usercopy whitelisting for task_struct
  fork: Define usercopy region in thread_stack slab caches
  fork: Define usercopy region in mm_struct slab caches
  net: Restrict unwhitelisted proto caches to size 0
  sctp: Copy struct sctp_sock.autoclose to userspace using put_user()
  sctp: Define usercopy region in SCTP proto slab cache
  caif: Define usercopy region in caif proto slab cache
  ip: Define usercopy region in IP proto slab cache
  net: Define usercopy region in struct proto slab cache
  scsi: Define usercopy region in scsi_sense_cache slab cache
  cifs: Define usercopy region in cifs_request slab cache
  vxfs: Define usercopy region in vxfs_inode slab cache
  ufs: Define usercopy region in ufs_inode_cache slab cache
  ...

[ Based on a patch from Paolo Bonzini <pbonzini@redhat.com> ]

... basically doing exactly what we do for VMX:

- Passthrough SPEC_CTRL to guests (if enabled in guest CPUID)
- Save and restore SPEC_CTRL around VMExit and VMEntry only if the guest
  actually used it.
Signed-off-by: NKarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDarren Kenny <darren.kenny@oracle.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517669783-20732-1-git-send-email-karahmed@amazon.de

[ Based on a patch from Ashok Raj <ashok.raj@intel.com> ]

Add direct access to MSR_IA32_SPEC_CTRL for guests. This is needed for
guests that will only mitigate Spectre V2 through IBRS+IBPB and will not
be using a retpoline+IBPB based approach.

To avoid the overhead of saving and restoring the MSR_IA32_SPEC_CTRL for
guests that do not actually use the MSR, only start saving and restoring
when a non-zero is written to it.

No attempt is made to handle STIBP here, intentionally. Filtering STIBP
may be added in a future patch, which may require trapping all writes
if we don't want to pass it through directly to the guest.

[dwmw2: Clean up CPUID bits, save/restore manually, handle reset]
Signed-off-by: NKarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDarren Kenny <darren.kenny@oracle.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517522386-18410-5-git-send-email-karahmed@amazon.de