Both as an exercise to document that we are reading the state outside of
the appropriate mutex and to ensure that we only read the value once
before the multiple comparisons, use READ_ONCE.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170513105201.17658-1-chris@chris-wilson.co.uk

drm_dp_atomic_find_vcpi_slots() should be called from ->atomic_check() to
check there are sufficient vcpi slots for a mode and to add that to the
state. This should be followed by a call to drm_dp_mst_allocate_vcpi()
in ->atomic_commit() to initialize a struct vcpi for the port.

drm_dp_atomic_release_vcpi_slots() should be called from
->atomic_check() to release a port's vcpi slot allocation from the
state.

Drivers that do not make use of this atomic helper are expected to call
drm_dp_find_vcpi_slots() instead before calling
drm_dp_mst_allocate_vcpi().

v3: drm_dp_atomic_release_vcpi_slots() now needs to know how many slots
    to release as we may not have a valid reference to port.
v2:
Added checks for verifying the port reference is valid
Moved get_mst_topology_state() into the helpers (Daniel)
Changed find_vcpi_slots() to not depend on current allocation

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Harry Wentland <Harry.wentland@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492753893-3748-4-git-send-email-dhinakaran.pandiyan@intel.com

Link bandwidth is shared between multiple display streams in DP MST
configurations. The DP MST topology manager structure maintains the
shared link bandwidth for a primary link directly connected to the GPU. For
atomic modesetting drivers, checking if there is sufficient link bandwidth
for a mode needs to be done during the atomic_check phase to avoid failed
modesets. Let's encapsulate the available link bw information in a
private state structure so that bw can be allocated and released atomically
for each of the ports sharing the primary link.

v3: WARN_ON() if connection_mutex is not held (Archit)
v2: Included kernel doc, moved state initialization and switched to
kmemdup() for allocation (Daniel)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Harry Wentland <Harry.wentland@amd.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492753893-3748-3-git-send-email-dhinakaran.pandiyan@intel.com

drm_dp_mst_allocate_vcpi() apart from setting up the vcpi structure,
also finds if there are enough slots available. This check is a duplicate
of that implemented in drm_dp_mst_find_vcpi_slots(). Let's move this check
out and reuse the existing drm_dp_mst_find_vcpi_slots() function to check
if there are enough vcpi slots before allocating them.

This brings the check to one place. Additionally drivers that will use MST
state tracking for atomic modesets can use the atomic version of
find_vcpi_slots() and reuse drm_dp_mst_allocate_vcpi()
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-4-git-send-email-dhinakaran.pandiyan@intel.com

The avail_slots member in the MST topology manager is never updated to
reflect the available vcpi slots. The check is effectively against
total slots, 63. So, let's make that check obvious and remove
avail_slots. While at it, make debug messages more descriptive.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Harry Wentland <Harry.wentland@amd.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-3-git-send-email-dhinakaran.pandiyan@intel.com

The total vcpi time slots is always 63 and does not depend on the link BW,
remove total_slots from MST topology manager struct. The next change is to
remove total_pbn which is hardcoded to 2560. The total PBN that the
topology manager allocates from depends on the link rate and is not a
constant. So, fix this by removing the total_pbn member itself.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Harry Wentland <Harry.wentland@amd.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-2-git-send-email-dhinakaran.pandiyan@intel.com

100% reproducible issue found on SKL SkullCanyon NUC with two external
DP daisy-chained monitors in DP/MST mode. When turning off or changing
the input of the second monitor the machine stops with a kernel
oops. This issue happened with 4.8.8 as well as drm/drm-intel-nightly.

This issue is traced to an inconsistent control flow in
drm_dp_update_payload_part1(): the 'port' pointer is set to NULL at the
same time as 'req_payload.num_slots' is set to zero, but the pointer is
dereferenced even when req_payload.num_slot is zero.

The problematic dereference was introduced in commit dfda0df3
("drm/mst: rework payload table allocation to conform better") and may
impact all versions since v3.18

The fix suggested by Chris Wilson removes the kernel oops and was found to
work well after 10mn of monkey-testing with the second monitor power and
input buttons

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98990
Fixes: dfda0df3 ("drm/mst: rework payload table allocation to conform better.")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v3.18+
Tested-by: NNathan D Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487076561-2169-1-git-send-email-jani.nikula@intel.com

struct drm_dp_mst_topology_mgr currently stores a pointer to struct dev.
Changing this to instead hold a pointer to drm_device is more useful as it
gives access to DRM structures. This also makes it consistent with other
DRM structures like drm_crtc, drm_connector etc.
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1485301777-3465-2-git-send-email-dhinakaran.pandiyan@intel.com

Only certain types of pdts have the DDC bus registered, so check for
that before we attempt the EDID read. Othwewise we risk playing around
with an i2c adapter that doesn't actually exist.

Cc: stable@vger.kernel.org
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: NCarlos Santa <carlos.santa@intel.com>
Tested-by: NKirill A. Shutemov <kirill@shutemov.name>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.com

The i2c adapter is only relevant for some peer device types, so
let's clear the pdt if it's still the same as the old_pdt when we
tear down the i2c adapter.

I don't really like this design pattern of updating port->whatever
before doing the accompanying changes and passing around old_whatever
to figure stuff out. Would make much more sense to me to the pass the
new value around and only update the port->whatever when things are
consistent. But let's try to work with what we have right now.

Quoting a follow-up from Ville:

"And naturally I forgot to amend the commit message w.r.t. this guy
[the change in drm_dp_destroy_port].  We don't really need to do this
here, but I figured I'd try to be a bit more consistent by having it,
just to avoid accidental mistakes if/when someone changes this stuff
again later."

v2: Clear port->pdt in the caller, if needed (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Carlos Santa <carlos.santa@intel.com> (v1)
Tested-by: Kirill A. Shutemov <kirill@shutemov.name> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477488633-16544-1-git-send-email-ville.syrjala@linux.intel.com

Cc: Dave Airlie <airlied@redhat.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-7-git-send-email-daniel.vetter@ffwll.ch

Just replicates whether the list is empty or not. Nuke code
to avoid writing docs for it!

Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-6-git-send-email-daniel.vetter@ffwll.ch

Not clearing mst manager's proposed vcpis table for destroyed connectors when the manager is stopped leaves it pointing to unrefernced memory, this causes pagefault when the manager is restarted when plugging back a branch.

Fixes: 91a25e46 ("drm/dp/mst: deallocate payload on port destruction")
Signed-off-by: NAndrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: NLyude <cpaul@redhat.com>
Cc: stable@vger.kernel.org
Cc: Mykola Lysenko <Mykola.Lysenko@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>

Some hubs are forgetful, and end up forgetting whatever GUID we set
previously after we do a suspend/resume cycle. This can lead to
hotplugging breaking (along with probably other things) since the hub
will start sending connection notifications with the wrong GUID. As
such, we need to check on resume whether or not the GUID the hub is
giving us is valid.
Signed-off-by: NLyude <cpaul@redhat.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460580618-7421-1-git-send-email-cpaul@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

We can thank KASAN for finding this, otherwise I probably would have spent
hours on it. This fixes a somewhat harder to trigger kernel panic, occuring
while enabling MST where the port we were currently updating the payload on
would have all of it's refs dropped before we finished what we were doing:

==================================================================
BUG: KASAN: use-after-free in drm_dp_update_payload_part1+0xb3f/0xdb0 [drm_kms_helper] at addr ffff8800d29de018
Read of size 4 by task Xorg/973
=============================================================================
BUG kmalloc-2048 (Tainted: G    B   W      ): kasan: bad access detected
-----------------------------------------------------------------------------

INFO: Allocated in drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] age=16477 cpu=0 pid=2175
	___slab_alloc+0x472/0x490
	__slab_alloc+0x20/0x40
	kmem_cache_alloc_trace+0x151/0x190
	drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper]
	drm_dp_send_link_address+0x526/0x960 [drm_kms_helper]
	drm_dp_check_and_send_link_address+0x1ac/0x210 [drm_kms_helper]
	drm_dp_mst_link_probe_work+0x77/0xd0 [drm_kms_helper]
	process_one_work+0x562/0x1350
	worker_thread+0xd9/0x1390
	kthread+0x1c5/0x260
	ret_from_fork+0x22/0x40
INFO: Freed in drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] age=7521 cpu=0 pid=2175
	__slab_free+0x17f/0x2d0
	kfree+0x169/0x180
	drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper]
	drm_dp_destroy_connector_work+0x2b8/0x490 [drm_kms_helper]
	process_one_work+0x562/0x1350
	worker_thread+0xd9/0x1390
	kthread+0x1c5/0x260
	ret_from_fork+0x22/0x40

which on this T460s, would eventually lead to kernel panics in somewhat
random places later in intel_mst_enable_dp() if we got lucky enough.
Signed-off-by: NLyude <cpaul@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

With the joys of things running concurrently, there's always a chance
that the port we get passed in drm_dp_payload_send_msg() isn't actually
valid anymore. Because of this, we need to make sure we validate the
reference to the port before we use it otherwise we risk running into
various race conditions. For instance, on the Dell MST monitor I have
here for testing, hotplugging it enough times causes us to kernel panic:

[drm:intel_mst_enable_dp] 1
[drm:drm_dp_update_payload_part2] payload 0 1
[drm:intel_get_hpd_pins] hotplug event received, stat 0x00200000, dig 0x10101011, pins 0x00000020
[drm:intel_hpd_irq_handler] digital hpd port B - short
[drm:intel_dp_hpd_pulse] got hpd irq on port B - short
[drm:intel_dp_check_mst_status] got esi 00 10 00
[drm:drm_dp_update_payload_part2] payload 1 1
general protection fault: 0000 [#1] SMP
…
Call Trace:
 [<ffffffffa012b632>] drm_dp_update_payload_part2+0xc2/0x130 [drm_kms_helper]
 [<ffffffffa032ef08>] intel_mst_enable_dp+0xf8/0x180 [i915]
 [<ffffffffa0310dbd>] haswell_crtc_enable+0x3ed/0x8c0 [i915]
 [<ffffffffa030c84d>] intel_atomic_commit+0x5ad/0x1590 [i915]
 [<ffffffffa01db877>] ? drm_atomic_set_crtc_for_connector+0x57/0xe0 [drm]
 [<ffffffffa01dc4e7>] drm_atomic_commit+0x37/0x60 [drm]
 [<ffffffffa0130a3a>] drm_atomic_helper_set_config+0x7a/0xb0 [drm_kms_helper]
 [<ffffffffa01cc482>] drm_mode_set_config_internal+0x62/0x100 [drm]
 [<ffffffffa01d02ad>] drm_mode_setcrtc+0x3cd/0x4e0 [drm]
 [<ffffffffa01c18e3>] drm_ioctl+0x143/0x510 [drm]
 [<ffffffffa01cfee0>] ? drm_mode_setplane+0x1b0/0x1b0 [drm]
 [<ffffffff810f79a7>] ? hrtimer_start_range_ns+0x1b7/0x3a0
 [<ffffffff81212962>] do_vfs_ioctl+0x92/0x570
 [<ffffffff81590852>] ? __sys_recvmsg+0x42/0x80
 [<ffffffff81212eb9>] SyS_ioctl+0x79/0x90
 [<ffffffff816b4e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4
RIP  [<ffffffffa012b026>] drm_dp_payload_send_msg+0x146/0x1f0 [drm_kms_helper]

Which occurs because of the hotplug event shown in the log, which ends
up causing DRM's dp helpers to drop the port we're updating the payload
on and panic.

CC: stable@vger.kernel.org
Signed-off-by: NLyude <cpaul@redhat.com>
Reviewed-by: NDavid Airlie <airlied@linux.ie>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some hubs are forgetful, and end up forgetting whatever GUID we set
previously after we do a suspend/resume cycle. This can lead to
hotplugging breaking (along with probably other things) since the hub
will start sending connection notifications with the wrong GUID. As
such, we need to check on resume whether or not the GUID the hub is
giving us is valid.
Signed-off-by: NLyude <cpaul@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460580618-7421-1-git-send-email-cpaul@redhat.com

Add some additional information (input vs. output port, sink associated
with VC, peer device type, max number of VCs supported) and ensure that
any embedded '\0' characters in a branch device's devid string are not
written to debugfs.

v2: Rebase + change drm_edid_get_monitor_name() call to reflect new
    signature.

v3: Minor changes suggested by Jani + rebase.

v4: Rebase

cc: dri-devel@lists.freedesktop.org
cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460654317-31288-2-git-send-email-jim.bride@linux.intel.com

This reverts commit cfcfa086.

This causes the tiling properties to break in some unexpected ways,

Revert it for now.

Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is needed to properly deallocate port payload
after downstream branch get unplugged.

In order to do this unplugged MST topology should
be preserved, to find first alive port on path to
unplugged MST topology, and send payload deallocation
request to branch device of found port.

For this mstb and port kref's are used in reversed
order to track when port and branch memory could be
freed.

Added additional functions to find appropriate mstb
as described above.
Signed-off-by: NMykola Lysenko <Mykola.Lysenko@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

On DELL U3014 if you clear the table before enabling MST it sometimes
hangs the receiver.
Signed-off-by: NAndrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Previous implementation does not handle case below: boot up one MST branch
to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output
of 1st MST, GUID is not created for 2nd MST branch. When downstream port of
2nd MST branch send upstream request, it fails because 2nd MST branch GUID
is not available.

New Implementation: only create GUID for MST branch and save it within Branch.
Signed-off-by: NHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

1. Get edid for all connected MST displays, not only on logical ports,
   in the same thread as MST topology detection is done:
     There are displays that have branches inside w/o logical ports.
     So in case another SST display connected downstream system can
     end-up in situation when 3 DOWN requests sent: two for
    ‘remote i2c read’ and one for ‘enum path resources’, making slots full.

2. Call notification callback in one place in the end of topology discovery/update:
     This is done to reduce number of events sent to userspace in case complex
     topology discovery is going, adding multiple number of connectors;

3. Remove notification callback call from short pulse interrupt processing function:
     This is done in order not to block interrupt processing function, in case any
     MST request will be made from it. Notification will be send from topology
     discovery/update work item.
Signed-off-by: NMykola Lysenko <Mykola.Lysenko@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Cc: stable@vger.kernel.org
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Our PBN value overflows the 20 bits integer part of the 20.12
fixed point. We need to use 31.32 fixed point to avoid this.

This happens with display clocks larger than 293122 (at 24 bpp),
which we see with the Sharp (and similar) 4k tiled displays.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

max_payload is limited by the space we have in
drm_dp_mst_topology_mgr::vcpi_mask,payload_mask. We need to track
max_payloads+1 IDs in these masks, see drm_dp_mst_assign_payload_id().
Add a sanity check for this.

Caught by coverity.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Otherwise this call would have no effect.

Caught by Coverity.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In drm_dp_mst_allocate_vcpi, it returns true in two paths,
but in one path, there is no reference couting decrease.
Signed-off-by: NInsu Yun <wuninsu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is needed to receive correct port
number from RAD, so MSTB could be found
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NMykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This fix is needed to support more then two
branch displays, so RAD address consist at
least of 2 elements
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NMykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

We should always send reply for UP request in order
to make downstream device clean-up resources appropriately.

Issue was that reply for UP request was sent only once.
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NMykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

In case broadcast message received in UP request,
RAD cannot be used to identify message originator.
Message should be parsed, originator should be found
by GUID from parsed message.

Also reply with broadcast in case broadcast message
received (for now it is always broadcast)
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NMykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This makes it possibly for drivers to find the associated
mst_port by looking at the payload allocation table.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449514552-10236-3-git-send-email-harry.wentland@amd.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we reply with NACK to UP requests which might
confuse receivers. We haven't seen any actual issues with
this but should still respond to UP requests correctly.
Signed-off-by: NMykola Lysenko <Mykola.Lysenko@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449514552-10236-2-git-send-email-harry.wentland@amd.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This adds code to initialise the SDP streams
for a sink in the simplest ordering.

I've no idea how you'd want to control the
ordering at this level, so don't bother
until someone comes up with a use case.
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449036584-105393-1-git-send-email-libin.yang@linux.intel.com

In Linux 4.3-rc5, there is an error case in drm_dp_get_branch_device
that returns without releasing mgr->lock, resulting a spew of kernel
messages about a kernel work function possibly having leaked a mutex
and presumably more serious adverse consequences later.  This patch
changes the error to "goto out" to unlock the mutex before returning.

[airlied: grabbed from drm-next as it fixes something we've seen]
Signed-off-by: NAdam J. Richter <adam_richter2004@yahoo.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In Linux 4.3-rc5, there is an error case in drm_dp_get_branch_device
that returns without releasing mgr->lock, resulting a spew of kernel
messages about a kernel work function possibly having leaked a mutex
and presumably more serious adverse consequences later.  This patch
changes the error to "goto out" to unlock the mutex before returning.
Signed-off-by: NAdam J. Richter <adam_richter2004@yahoo.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This zeroes the msg so no random stack data ends up getting
sent, it also limits the function to not accepting > 4
i2c msgs.

Cc: stable@vger.kernel.org
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This just removes the magic number.
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Since 9eb1e57f
drm/dp/mst: make sure mst_primary mstb is valid in work function

we validate the mstb structs in the work function, and doing
that takes a reference. So we should never get here with the
work function running using the mstb device, only if the work
function hasn't run yet or is running for another mstb.

So we don't need to sync the work here, this was causing
lockdep spew as below.

[  +0.000160] =============================================
[  +0.000001] [ INFO: possible recursive locking detected ]
[  +0.000002] 3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1 Tainted: G        W      ------------
[  +0.000001] ---------------------------------------------
[  +0.000001] kworker/4:2/1262 is trying to acquire lock:
[  +0.000001]  ((&mgr->work)){+.+.+.}, at: [<ffffffff810b29a5>] flush_work+0x5/0x2e0
[  +0.000007]
but task is already holding lock:
[  +0.000001]  ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710
[  +0.000004]
other info that might help us debug this:
[  +0.000001]  Possible unsafe locking scenario:

[  +0.000002]        CPU0
[  +0.000000]        ----
[  +0.000001]   lock((&mgr->work));
[  +0.000002]   lock((&mgr->work));
[  +0.000001]
 *** DEADLOCK ***

[  +0.000001]  May be due to missing lock nesting notation

[  +0.000002] 2 locks held by kworker/4:2/1262:
[  +0.000001]  #0:  (events_long){.+.+.+}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710
[  +0.000004]  #1:  ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710
[  +0.000003]
stack backtrace:
[  +0.000003] CPU: 4 PID: 1262 Comm: kworker/4:2 Tainted: G        W      ------------   3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1
[  +0.000001] Hardware name: LENOVO 20EGS0R600/20EGS0R600, BIOS GNET71WW (2.19 ) 02/05/2015
[  +0.000008] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
[  +0.000001]  ffffffff82c26c90 00000000a527b914 ffff88046399bae8 ffffffff816fe04d
[  +0.000004]  ffff88046399bb58 ffffffff8110f47f ffff880461438000 0001009b840fc003
[  +0.000002]  ffff880461438a98 0000000000000000 0000000804dc26e1 ffffffff824a2c00
[  +0.000003] Call Trace:
[  +0.000004]  [<ffffffff816fe04d>] dump_stack+0x19/0x1b
[  +0.000004]  [<ffffffff8110f47f>] __lock_acquire+0x115f/0x1250
[  +0.000002]  [<ffffffff8110fd49>] lock_acquire+0x99/0x1e0
[  +0.000002]  [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0
[  +0.000002]  [<ffffffff810b29ee>] flush_work+0x4e/0x2e0
[  +0.000002]  [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0
[  +0.000004]  [<ffffffff81025905>] ? native_sched_clock+0x35/0x80
[  +0.000002]  [<ffffffff81025959>] ? sched_clock+0x9/0x10
[  +0.000002]  [<ffffffff810da1f5>] ? local_clock+0x25/0x30
[  +0.000002]  [<ffffffff8110dca9>] ? mark_held_locks+0xb9/0x140
[  +0.000003]  [<ffffffff810b4ed5>] ? __cancel_work_timer+0x95/0x160
[  +0.000002]  [<ffffffff810b4ee8>] __cancel_work_timer+0xa8/0x160
[  +0.000002]  [<ffffffff810b4fb0>] cancel_work_sync+0x10/0x20
[  +0.000007]  [<ffffffffa0160d17>] drm_dp_destroy_mst_branch_device+0x27/0x120 [drm_kms_helper]
[  +0.000006]  [<ffffffffa0163968>] drm_dp_mst_link_probe_work+0x78/0xa0 [drm_kms_helper]
[  +0.000002]  [<ffffffff810b5850>] process_one_work+0x220/0x710
[  +0.000002]  [<ffffffff810b57e4>] ? process_one_work+0x1b4/0x710
[  +0.000005]  [<ffffffff810b5e5b>] worker_thread+0x11b/0x3a0
[  +0.000003]  [<ffffffff810b5d40>] ? process_one_work+0x710/0x710
[  +0.000002]  [<ffffffff810beced>] kthread+0xed/0x100
[  +0.000003]  [<ffffffff810bec00>] ? insert_kthread_work+0x80/0x80
[  +0.000003]  [<ffffffff817121d8>] ret_from_fork+0x58/0x90

v2: add flush_work.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

In order to cache the EDID properly for tiled displays, we
need to retrieve it before we register the connector with
userspace, otherwise userspace can call get resources
and try and get the edid before we've even cached it.

This fixes some problems when hotplugging mst monitors,
with X/mutter running. As mutter seems to get 0 modes
for one of the monitors in the tile.

v2: fix warning in radeon
handle tile setting in cached path rather than
get edid path.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>