Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 163
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 07 12月, 2012 8 次提交
  3. 05 12月, 2012 1 次提交
  5. 04 12月, 2012 4 次提交
    • T
      ALSA: hda - Fix yet another race of vga_switcheroo registration · f4c482a4
      由 Takashi Iwai 提交于 
      The recent fix for vga switcheroo race in commit 128960a9 opened yet
another race.  At the time the audio driver starts probing, user may
turn off D-GPU off.  But at this moment, the audio driver still
doesn't register the vga switcheroo client, thus the switching isn't
notified.  Then the hardware gets off out of sudden, resulting in
invalid reads and lots of "spurious response" error messages.

For solving this situation, the following changes have been done in
this patch:
- Move again vga switcheroo registration to the very early stage of
  the probing; this also requires to set pci drvdata properly before
  registration
- Introduce the completion to synchronize the driver probe at vga
  switcheroo callbacks; this assures that the whole probing finished
  before executing the callbacks
Reported-by: NDaniel J Blueman <daniel@quora.org>
Tested-by: NDaniel J Blueman <daniel@quora.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      f4c482a4
    • E
      ALSA: usb-audio: sync ep init fix for audioformat mismatch · 0d9741c0
      由 Eldad Zack 提交于 
      Commit 947d2996 , "ALSA: snd-usb:
properly initialize the sync endpoint", while correcting the
initialization of the sync endpoint when opening just the data
endpoint, prevents devices that has a sync endpoint, with a channel
number different than that of the data endpoint, from functioning.
Due to a different channel and period bytes count, attempting to
initialize the sync endpoint will fail at the usb host driver.
For example, when using xhci:

 cannot submit urb 0, error -90: internal error

With this patch, if a sync endpoint has multiple audioformats, a
matching audioformat is preferred. An audioformat must be found
with at least one channel and support the requested sample rate
and PCM format, otherwise the stream will not be opened.

If the number of channels differ between the selected audioformat
and the requested format, adjust the period bytes count accordingly.
It is safe to perform the calculation on the basis of the channel
count, since the requested PCM audio format and the rate must be
supported by the selected audioformat.

Cc: Jeffrey Barish <jeff_barish@earthlink.net>
Cc: Daniel Mack <zonque@gmail.com>
Signed-off-by: NEldad Zack <eldad@fogrefinery.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      0d9741c0
    • T
      ALSA: usb-audio: Fix missing autopm for MIDI input · f5f16541
      由 Takashi Iwai 提交于 
      The commit [88a8516a: ALSA: usbaudio: implement USB autosuspend] added
the support of autopm for USB MIDI output, but it didn't take the MIDI
input into account.

This patch adds the following for fixing the autopm:
- Manage the URB start at the first MIDI input stream open, instead of
  the time of instance creation
- Move autopm code to the common substream_open()
- Make snd_usbmidi_input_start/_stop() more robust and add the running
  state check
Reviewd-by: NClemens Ladisch <clemens@ladisch.de>
Tested-by: NClemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      f5f16541
    • T
      ALSA: usb-audio: Avoid autopm calls after disconnection · 59866da9
      由 Takashi Iwai 提交于 
      Add a similar protection against the disconnection race and the
invalid use of usb instance after disconnection, as well as we've done
for the USB audio PCM.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51201Reviewd-by: NClemens Ladisch <clemens@ladisch.de>
Tested-by: NClemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      59866da9
  7. 03 12月, 2012 4 次提交
  9. 02 12月, 2012 10 次提交
  11. 01 12月, 2012 1 次提交
  13. 30 11月, 2012 3 次提交
  15. 29 11月, 2012 9 次提交