cpu_has_apic has already investigated boot_cpu_data
X86_FEATURE_APIC bit for being clear if condition is
triggered.

So there is no need to clear this bit second time.
Signed-off-by: NCyrill Gorcuno v <gorcunov@openvz.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
LKML-Reference: <20090722205259.GE15805@lenovo>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Instead of plain NULL deref we better throw error
message with a backtrace. Actually we need more
gracious error handling here. Meanwhile leave it
as is.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: yinghai@kernel.org
LKML-Reference: <20090801075435.769301745@openvz.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This allow us to save a few lines of code.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: yinghai@kernel.org
LKML-Reference: <20090801075435.597863129@openvz.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This takes care of the following entry from Dan's list:

  arch/x86/kernel/apic/io_apic.c +3241 destroy_irq(11) warning: variable derefenced before check 'desc'
Reported-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Eugene Teo <eteo@redhat.com>
Cc: Julia Lawall <julia@diku.dk>
LKML-Reference: <200907302321.19086.bzolnier@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The 32 and 64-bit versions of ioapic_retrigger_irq() are identical
except the 64-bit one takes vector_lock.  vector_lock is defined and
used on 32-bit too, so just use a common ioapic_retrigger_irq().
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Use a normal for() loop in __target_IO_APIC_irq().
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

There's no need for a control variable in replace_pin_at_irq_node();
it can just return if it finds the old apic/pin to replace.

If the loop terminates, then it didn't find the old apic/pin, so it can
add the new ones.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Use a conventional for() loop in replace_pin_at_irq_node().
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Rather than duplicating the same alloc/init code twice, restructure
the function to look for duplicates and then add an entry
if none is found.

This function is not performance critical; all but one of its callers
are __init functions, and the non-__init caller is for PCI device setup.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Convert the unconventional loop in io_apic_level_ack_pending() to
a conventional for() loop.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

The comment got separated from its subject, so move it to what
appears to be the right place, and update to describe the current
structure.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

The structure is defined immediately below, so there's no need
to forward declare it.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

While no 64-bit hardware will have a version 0x11 I/O APIC which needs
the level/edge bug workaround, that's not a particular reason to use
CONFIG_X86_32 to #ifdef the code out.  Most 32-bit machines will no
longer need the workaround either, so the test to see whether it is
necessary should be more fine-grained than "32-bit=yes, 64-bit=no".

(Also fix formatting of block comment.)
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

The main difference between 32 and 64-bit __mask_IO_APIC_irq() does a
readback from the I/O APIC to synchronize it.

If there's a hardware requirement to do a readback sync after updating
an APIC register, then it will be a hardware requrement regardless of
whether the kernel is compiled 32 or 64-bit.

Unify __mask_IO_APIC_irq() using the 64-bit version which always syncs
with io_apic_sync().
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

If ioapic_modify_irq() is marked inline, it gets inlined several times.
Un-inlining it saves around 200 bytes in .text for me.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

We don't put braces around a single statement.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: fix race between write_metadata_buffer and get_write_access
  ext4: Fix ext4_mb_initialize_context() to initialize all fields
  ext4: fix null handler of ioctls in no journal mode
  ext4: Fix buffer head reference leak in no-journal mode
  ext4: Move __ext4_journalled_writepage() to avoid forward declaration
  ext4: Fix mmap/truncate race when blocksize < pagesize && !nodellaoc
  ext4: Fix mmap/truncate race when blocksize < pagesize && delayed allocation
  ext4: Don't look at buffer_heads outside i_size.
  ext4: Fix goal inum check in the inode allocator
  ext4: fix no journal corruption with locale-gen
  ext4: Calculate required journal credits for inserting an extent properly
  ext4: Fix truncation of symlinks after failed write
  jbd2: Fix a race between checkpointing code and journal_get_write_access()
  ext4: Use rcu_barrier() on module unload.
  ext4: naturally align struct ext4_allocation_request
  ext4: mark several more functions in mballoc.c as noinline
  ext4: Fix potential reclaim deadlock when truncating partial block
  jbd2: Remove GFP_ATOMIC kmalloc from inside spinlock critical region
  ext4: Fix type warning on 64-bit platforms in tracing events header

The function jbd2_journal_write_metadata_buffer() calls
jbd_unlock_bh_state(bh_in) too early; this could potentially allow
another thread to call get_write_access on the buffer head, modify the
data, and dirty it, and allowing the wrong data to be written into the
journal.  Fortunately, if we lose this race, the only time this will
actually cause filesystem corruption is if there is a system crash or
other unclean shutdown of the system before the next commit can take
place.
Signed-off-by: Ndingdinghua <dingdinghua85@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error
  Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board
  Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME
  Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME
  Staging: rtl8192su: convert to net_device_ops
  Staging: serqt_usb2: declare qt_open static in serqt_usb2
  Staging: serqt_usb2: fix qt_close parameters in serqt_usb2
  Staging: comedi: jr3_pci.c: add required includes
  Staging: meilhaus: add email address to TODO
  Staging: rspiusb: use NULL virtual address instead of a bogus one
  Staging: vt6655: compile fix
  Staging: rt2870: Add USB ID for Sitecom WL-608

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  wm97xx_batery: replace driver_data with dev_get_drvdata()
  omap: video: remove direct access of driver_data
  Sound: remove direct access of driver_data
  driver model: fix show/store prototypes in doc.
  Firmware: firmware_class, fix lock imbalance
  Driver Core: remove BUS_ID_SIZE
  sparc: remove driver-core BUS_ID_SIZE
  partitions: fix broken uevent_suppress conversion
  devres: WARN() and return, don't crash on device_del() of uninitialized device

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (48 commits)
  USB: otg: fix module reinsert issue
  USB: handle zero-length usbfs submissions correctly
  USB: EHCI: report actual_length for iso transfers
  USB: option: remove unnecessary and erroneous code
  USB: cypress_m8: remove invalid Clear-Halt
  USB: musb_host: undo incorrect change in musb_advance_schedule()
  USB: fix LANGID=0 regression
  USB: serial: sierra driver id_table additions
  USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.
  USB: fix race leading to a write after kfree in usbfs
  USB: Sierra: fix oops upon device close
  USB: option.c: add A-Link 3GU device id
  USB: Serial: Add support for Arkham Technology adapters
  USB: Fix option_ms regression in 2.6.31-rc2
  USB: gadget audio: select SND_PCM
  USB: ftdi: support NDI devices
  Revert USB: usbfs: deprecate and hide option for !embedded
  USB: usb.h: fix kernel-doc notation
  USB: RNDIS gadget, fix issues talking from PXA
  USB: serial: FTDI with product code FB80 and vendor id 0403
  ...

JFS hasn't really been supported for a while.  It's still maintained,
but saying it's supported is a stretch.  Updating my preferred email
address as well.
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove duplicated #include('s) in
  arch/mn10300/kernel/sys_mn10300.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 405f5571 ("headers: smp_lock.h
redux") broke the build of two staging drivers. Fix them.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pavel Roskin pointed out that kmemcheck indicated that
ext4_mb_store_history() was accessing uninitialized values of
ac->ac_tail and ac->ac_buddy leading to garbage in the mballoc
history.  Fix this by initializing the entire structure to all zeros
first.

Also, two fields were getting doubly initialized by the caller of
ext4_mb_initialize_context, so remove them for efficiency's sake.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The EXT4_IOC_GROUP_ADD and EXT4_IOC_GROUP_EXTEND ioctls should not
flush the journal in no_journal mode.  Otherwise, running resize2fs on
a mounted no_journal partition triggers the following error messages:

BUG: unable to handle kernel NULL pointer dereference at 00000014
IP: [<c039d282>] _spin_lock+0x8/0x19
*pde = 00000000 
Oops: 0002 [#1] SMP
Signed-off-by: NPeng Tao <bergwolf@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We found a problem with buffer head reference leaks when using an ext4
partition without a journal.  In particular, calls to ext4_forget() would
not to a brelse() on the input buffer head, which will cause pages they
belong to to not be reclaimable.

Further investigation showed that all places where ext4_journal_forget() and
ext4_journal_revoke() are called are subject to the same problem.  The patch
below changes __ext4_journal_forget/__ext4_journal_revoke to do an explicit
release of the buffer head when the journal handle isn't valid.
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Platform_device instance (pd) is not set to NULL in
usb_nop_xceiv_unregister() causing usb_nop_xceiv_register()
to fail during module reinsert.

From: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: NBabu Ravi <ravibabu@ti.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>

This patch (as1262) fixes a bug in usbfs: It refuses to accept
zero-length transfers, and it insists that the buffer pointer be valid
even if there is no data being transferred.

The patch also consolidates a bunch of repetitive access_ok() checks
into a single check, which incidentally fixes the lack of such a check
for Isochronous URBs.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1259b) makes ehci-hcd return the total number of bytes
transferred in urb->actual_length for Isochronous transfers.
Until now, the actual_length value was unaccountably left at 0.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1264) removes a bunch of unnecessary and erroneous stuff
from the option USB-serial driver.  Clearly there's no need to verify
that the device pointer stored in the URBs is right or to store the
same pointer over again.  After all, the pointer can't change once it
has been set up.

There's also no need to call usb_clear_halt for the IN endpoint
multiple times -- in fact, doing so is an error since every time after
the first there will be active URBs queued for that endpoint.  Since
the Clear-Halts don't appear to be needed at all, the patch simply
removes them.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1265) removes an erroneous call to usb_clear_halt from
the cypress_m8 driver.  The call isn't valid because it is made from
interrupt context whereas usb_clear_halt is a blocking routine.

Presumably the code has never been executed; if it did it would cause
an oops.  So instead treat -EPIPE like any other sort of unexplained
error.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit c9cd06b3 (musb_host: refactor
URB giveback) included due to my overlook the change incorrect in the
context of the current kernel -- undo it.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

commit b7af0bb2 ("USB: allow malformed LANGID descriptors") broke support
for devices without string descriptor support.

Reporting string descriptors is optional to USB devices, and a device
lets us know it can't deal with strings by responding to the LANGID
request with a STALL token.

The kernel handled that correctly before b7af0bb2 came in, but failed
hard if the LANGID was reported but broken. More than that, if a device
was not able to provide string descriptors, the LANGID was retrieved
over and over again at each string read request.

This patch changes the behaviour so that

 a) the LANGID is only queried once
 b) devices which can't handle string requests are not asked again
 c) devices with malformed LANGID values have a sane fallback to 0x0409
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- Updated the id_table with all devices that Sierra Wireless currently
   support
 - Re-ordered the contents of the id_table for better readability
Signed-off-by: NElina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Adds USB ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.
Signed-off-by: NKrzysztof Ha³asa <khc@pm.waw.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this fixes a race between async_completed() and proc_reapurbnonblock().

CPU A                   CPU B

spin_lock(&ps->lock);
list_move_tail(&as->asynclist, &ps->async_completed);
spin_unlock(&ps->lock);

                                if (!(as = async_getcompleted(ps)))
                                        return -EAGAIN;
                                return processcompl(as, (void __user * __user *)arg);

processcompl() calls free_async() which calls kfree(as)

as->status = urb->status;
if (as->signr) {
        sinfo.si_signo = as->signr;
        sinfo.si_errno = as->status;
        sinfo.si_code = SI_ASYNCIO;
        sinfo.si_addr = as->userurb;
        kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
                              as->euid, as->secid);
}
snoop(&urb->dev->dev, "urb complete\n");
snoop_urb(urb, as->userurb);

write after kfree
Signed-off-by: NOliver Neukum <oliver@neukum.org>

This patch (as1263) fixes a mixup that occurred when conflicting
patches for the sierra driver were merged incorrectly.  The former
sierra_shutdown routine should have been become sierra_release, not
sierra_disconnect.

The symptom this fixes is an oops when the device file is closed after
a Sierra device has been unplugged (Bugzilla #13675).
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NPeter Naulls <peter@mushroomnetworks.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add A-Link 3GU device id 1e0e:9200 into option driver. The device
has 4 interfaces, of which 1 is handled by storage and the other 3
by option driver.

The device appears first as CD-only 1e0e:f000 device and must be
switched to 1e0e:9200 mode either by using "eject CD" or
usb_modeswitch.

For the record, the device does not work with generic usbserial
driver (usb disconnect when sending the ATDT command).
Signed-off-by: NAnssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>