dlm_request_all_locks() should deal with the status sent from target node
if DLM_LOCK_REQUEST_MSG is sent successfully, or recovery master will fall
into endless loop, waiting for other nodes to send locks and
DLM_RECO_DATA_DONE_MSG to me.

        NodeA                                  NodeB
                                     selected as recovery master
                                     dlm_remaster_locks()
                                     ->dlm_request_all_locks()
                                     send DLM_LOCK_REQUEST_MSG to nodeA

It happened that NodeA cannot alloc memory when it processes this
message.  dlm_request_all_locks_handler() do not queue
dlm_request_all_locks_worker and returns -ENOMEM.  It will never send
locks and DLM_RECO_DATA_DONE_MSG to NodeB.

                                    NodeB do not deal with the status
                                    sent from nodeA, and will fall in
                                    endless loop waiting for the
                                    recovery state of NodeA to be
                                    changed.
Signed-off-by: Njoyce <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Jeff Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dlm_begin_reco_handler() returns without putting dlm when dlm recovery
state is DLM_RECO_STATE_FINALIZE.
Signed-off-by: Njoyce <xuejiufei@huawei.com>
Reviewed-by: NJie Liu <jeff.liu@oracle.com>
Acked-by: NJoel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In dlm_request_all_locks, ret is type enum.  But o2net_send_message
returns a type int value.  Then it will never run into the following
error branch.  So we should change the ret type from enum to int.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: NSunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Below 3 functions have already been declared in dlmcommon.h, so we have
no need to declare them again in dlmrecovery.c:

  dlm_complete_recovery_thread
  dlm_launch_recovery_thread
  dlm_kick_recovery_thread
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: NSunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dlm_mig_lockres_handler() is missing a dlm_lockres_put() on an error path.
Signed-off-by: Njoyce <xuejiufei@huawei.com>
Reviewed-by: Nshencanquan <shencanquan@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kfree on a NULL pointer is a no-op.  Remove the redundant null pointer
check.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dlm_wait_for_node_death() and dlm_wait_for_node_recovery() needed a facelift.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

Patch cleans up helpers that set/clear refmap bits and grab/drop inflight lock
ref counts.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

dlm_finish_local_lockres_recovery() needed a facelift.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

o2dlm messages needed a facelift.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>

This patch adds a new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG and ups the dlm
protocol to 1.2.

o2dlm sends this new message in dlm_unregister_domain() to mark the beginning
of the exit domain. This message is sent to all nodes in the domain.

Currently o2dlm has no way of informing other nodes of its impending exit.
This information is useful as the other nodes could disregard the exiting
node in certain operations. For example, in resource migration. If two or
more nodes were umounting in parallel, it would be more efficient if o2dlm
were to choose a non-exiting node to be the new master node rather than an
exiting one.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NJoel Becker <jlbec@evilplan.org>

mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
   Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
   mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.
Signed-off-by: NTao Ma <boyu.mt@taobao.com>

ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.
Signed-off-by: NTao Ma <boyu.mt@taobao.com>

In the following situation, there remains an incorrect bit in refmap on the
recovery master. Finally the recovery master will fail at purging the lockres
due to the incorrect bit in refmap.

1) node A has no interest on lockres A any longer, so it is purging it.
2) the owner of lockres A is node B, so node A is sending de-ref message
to node B.
3) at this time, node B crashed. node C becomes the recovery master. it recovers
lockres A(because the master is the dead node B).
4) node A migrated lockres A to node C with a refbit there.
5) node A failed to send de-ref message to node B because it crashed. The failure
is ignored. no other action is done for lockres A any more.

For mormal, re-send the deref message to it to recovery master can fix it. Well,
ignoring the failure of deref to the original master and not recovering the lockres
to recovery master has the same effect. And the later is simpler.
Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com>
Acked-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

dlm->recovery_map is defined as
	unsigned long recovery_map[BITS_TO_LONGS(O2NM_MAX_NODES)];

We should treat O2NM_MAX_NODES as the bit map size in bits.
This patches fixes a bit operation that takes O2NM_MAX_NODES + 1 as bitmap size.
Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

Print the node number of a peer node if sending it a message failed.
Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

If a node down event happens while dlm shutdown in progress, dlm recovery
should be done before dlm is shutdown.  We can't migrate unrecovered locks,
obviously.  But dlm_reco_thread only does recovery if the dlm_state is
in DLM_CTXT_JOINED.

dlm_reco_thread should do recovery if dlm_state is in DLM_CTXT_JOINED or
DLM_CTXT_IN_SHUTDOWN.
Signed-off-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

During recovery, the dlm frees the locks for the dead node. If it finds a
lock in a resource for the dead node, it expects that node to also have a
ref in that lock resource. If not, it BUGs.

ossbz#1175 was filed with the above BUG. Now, while it is correct that we
should be expecting the ref, I see no reason why we have to BUG. After all,
we are freeing up the lock and clearing the ref.

This patch replaces the BUG_ON with a printk(). Hopefully, that will give
us more clues next time this happens.

http://oss.oracle.com/bugzilla/show_bug.cgi?id=1175Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Acked-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

Mainline commit aad1b153 made the
dlm_begin_reco_handler() return -EAGAIN instead of EAGAIN.

As this error is transmitted over the wire, we want the receiver,
dlm_send_begin_reco_message(), to understand both the older EAGAIN and
the newer -EAGAIN, to allow rolling upgrade of the cluster nodes.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

When a lock resource is migrated, the dlm compares the migrated
locks with that that was already existing on the new node. If the
comparison fails, it BUGs. This patch prints more messages when the
comparison fails inorder to help with the root cause analyis.

http://oss.oracle.com/bugzilla/show_bug.cgi?id=1206
This does not fix bz1206. However, if we run into it again, we will
have more information to chew on.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

During lock resource migration, o2dlm fills the packet with a LVB from the
first valid lock. For sanity, it ensures that the other valid locks have the
same LVB. If not, it BUGs.

The valid locks are ones that have granted EX or PR lock levels and are either
on the Granted or Converting lists. Locks in the Blocked list cannot have a
valid LVB.

This patch ensures that we skip the locks in the Blocked list.

Fixes oss bugzilla#1202
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1202Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

Patch removes trailing whitespaces.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

We used to return positive EAGAIN to indicate a retry action
is needed in dlm_begin_reco_handler(). Now we return negative
-EAGAIN to erase the confusion caused by this error code.
Signed-off-by: NTiger Yang <tiger.yang@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

* remove asm/atomic.h inclusion from linux/utsname.h --
   not needed after kref conversion
 * remove linux/utsname.h inclusion from files which do not need it

NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

in dlmrecovery.c:1121, replace 'migrate' to 'migration' to keep the consistency
by comparing to other lines with the similar log info in the same file.
Signed-off-by: NJeff Liu <jeff.liu@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

Knowing the dlm recovery master helps in debugging recovery
issues. This patch prints a message on the recovery master node.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

During migration, the recovery master node may be asked to master a lockres
it may not know about. In that case, it would not only have to create a
lockres and add it to the hash, but also remember to to do the _put_
corresponding to the kref_init in dlm_init_lockres(), as soon as the migration
is completed. Yes, we don't wait for the dlm_purge_lockres() to do that
matching put. Note the ref added for it being in the hash protects the lockres
from being freed prematurely.

This patch adds that missing put, as described above, to plug a memleak.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Normally locks for remote nodes are freed when that node sends an UNLOCK
message to the master. The master node tags an DLM_UNLOCK_FREE_LOCK action
to do an extra put on the lock at the end.

However, there are times when the master node has to free the locks for the
remote nodes forcibly.

Two cases when this happens are:
1. When the master has migrated the lockres plus all locks to another node.
2. When the master is clearing all the locks of a dead node.

It was in the above two conditions that the dlm was missing the extra put.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

__dlm_print_one_lock_resource must be called with spin_lock
the res->spinlock. While in some cases, we use it without this
precondition and lead to the failure of assert_spin_locked.
So call dlm_print_one_lock_resource instead.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Currently the process of dlm join contains 2 steps: query join and assert join.
After query join, the joined node will set its joining_node. So if the joining
node happens to panic before the 2nd step, the joined node will fail to clear
its joining_node flag because that node isn't in the domain map. It at least
cause 2 problems.
1. All the new join request will fail. So no new node can mount the volume.
2. The joined node can't umount the volume since during the umount process it
   has to wait for the joining_node to be unknown. So the umount will be hanged.

The solution is to clear the joining_node before we check the domain map.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

With this, a dlm client can take advantage of the group protocol in the dlm
to get full notification whenever a node within the dlm domain leaves
unexpectedly.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.

The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.

[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replacing memset(<addr>,0,PAGE_SIZE) with clear_page() in
fs/ocfs2/dlm/dlmrecovery.c
Signed-off-by: NShani Moideen <shani.moideen@wipro.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

There is a possibility that dlm_remaster_locks could overwride node->state
with DLM_RECO_NODE_DATA_REQUESTED after dlm_reco_data_done_handler sets the
node->state to DLM_RECO_NODE_DATA_DONE. This could lead to recovery getting
stuck and requires a cluster reboot. Synchronize with dlm_reco_state_lock
spinlock.
Signed-off-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Currently o2net allows one handler function per message type. This
patch adds the ability to call another function to be called after
the handler has returned the message to the other node.

Handlers are now given the option of returning a context (in the form of a
void **) which will be passed back into the post message handler function.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The dlm encodes the node number and a sequence number in the lock cookie.
It also stores the cookie in the lockres in the big endian format to avoid
swapping 8 bytes on each lock request. The bug here was that it was assuming
the cookie to be in the cpu format when decoding it for printing the error
message. This patch swaps the bytes before the print.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The dlm was not waking up threads waiting on the lockres wait queue,
waiting for the lockres to be no longer be in the DLM_LOCK_RES_IN_PROGRESS
and the DLM_LOCK_RES_MIGRATING states.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>