Pull ARM SoC platform updates from Arnd Bergmann:
 "We get support for three new 32-bit SoC platforms this time.

  The amount of changes in arch/arm for any of them is miniscule, as all
  the interesting code is in device driver subsystems (irqchip, clk,
  pinctrl, ...) these days.  I'm listing them here, as the addition of
  the Kconfig statement is the main relevant milestone for a new
  platform.  In each case, some drivers are are shared with existing
  platforms, while other drivers are added for v4.7 as well, or come in
  a later release.

   - The Aspeed platform is probably the most interesting one, this is
     what most whitebox servers use as their baseboard management
     controller.  We get support for the very common ast2400 and ast2500
     SoCs.  The OpenBMC project focuses on this chip, and the LWN
     article about their ELC 2016 presentation at

        https://lwn.net/Articles/683320/

     triggered the submission, but the code comes from IBM's OpenPOWER
     team rather than the team at Facebook.  There are still a lot more
     drivers that need to get added over time, and I hope both teams can
     work together on that.

   - OXNAS is an old platform for Network Attached Storage devices from
     Oxford Semiconductor.  There are models with ARM10 (!) and
     ARM11MPCore cores, but for now, we only support the original ARM9
     based versions.  The product lineup was subsequently part of PLX,
     Avago and now the new Broadcom Ltd.

        https://wiki.openwrt.org/doc/hardware/soc/soc.oxnas

     has some more information.

   - V2M-MPS2 is a prototyping platform from ARM for their Cortex-M
     cores and is related to the existing Realview / Versatile Express
     lineup, but without MMU.

     We now support various NOMMU platforms, so adding a new one is
     fairly straightforward.

        http://infocenter.arm.com/help/topic/com.arm.doc.100112_0100_03_en/

     has detailed information about the platform.

  Other noteworthy updates:

   - Work on LPC32xx has resumed, and Vladimir Zapolskiy and Sylvain
     Lemieux are now maintaining the platform.

     This is an older ARM9 based platform from NXP (not Freescale), but
     it remains in use in embedded markets.

   - Kevin Hilman is now co-maintaining the Amlogic Meson platform for
     both 32-bit and 64-bit ARM, and started contributing some patches.

   - As is often the case, work on the OMAP platforms makes up the bulk
     of the actual SoC code changes in arch/arm, but there isn't a lot
     of that either"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  MAINTAINERS: ARM/Amlogic: add co-maintainer, misc. updates
  MAINTAINERS: add ARM/NXP LPC32XX SoC specific drivers to the section
  MAINTAINERS: add new maintainers of NXP LPC32xx SoC
  MAINTAINERS: move ARM/NXP LPC32xx record to ARM section
  arm: Add Aspeed machine
  ARM: lpc32xx: remove duplicate const on lpc32xx_auxdata_lookup
  ARM: lpc32xx: remove leftovers of legacy clock source and provider drivers
  ARM: lpc32xx: remove reboot header file
  ARM: dove: Remove CLK_IS_ROOT
  ARM: orion5x: Remove CLK_IS_ROOT
  ARM: mv78xx0: Remove CLK_IS_ROOT
  ARM: davinci: da850: use clk->set_parent for async3
  ARM: davinci: Move clock init after ioremap.
  MAINTAINERS: Update ARM Versatile Express platform entry
  ARM: vexpress/mps2: introduce MPS2 platform
  MAINTAINERS: add maintainer entry for ARM/OXNAS platform
  ARM: Add new mach-oxnas
  irqchip: versatile-fpga: add new compatible for OX810SE SoC
  ARM: uniphier: correct the call order of of_node_put()
  MAINTAINERS: fix stale TI DaVinci entries
  ...

Pull ARM SoC cleanups and fixes from Arnd Bergmann:
 "Traditionally we've had two separate branches for cleanups and
  non-critical bug fixes, but both of these got smaller with each
  release and the differences are rather unclear now, so it seems more
  appropriate to have a combined branch.

  The most notable change is for OMAP, which gets a small rework to
  simplify handling of the AUXDATA mechanism used on machines that are
  not completely DT based yet, along with other work that is used as
  preparation for dropping the legacy board files"

* tag 'armsoc-cleanups-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: exynos: Add interrupt line to MAX8997 PMIC on exynos4210-trats
  ARM: dts: exynos: Fix regulator name to avoid forbidden character on exynos4210-trats
  ARM: dts: exynos: Add MFC memory banks for Peach boards
  ARM: OMAP2+: n900 needs MMC slot names for legacy user space
  ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51
  ARM: debug: remove extraneous DEBUG_HI3716_UART option
  ARM: OMAP2+: Simplify auxdata by using the generic match
  of/platform: Allow secondary compatible match in of_dev_lookup
  ARM: davinci: use IRQCHIP_DECLARE for cp_intc
  ARM: davinci: remove unused DA8XX_NUM_UARTS
  ARM: davinci: simplify call to of populate
  ARM: DaVinci USB: removed deprecated properties from MUSB config
  ARM: rockchip: Fix use of plain integer as NULL pointer
  ARM: realview: hide unused 'pmu_device' object
  soc: versatile: dynamically detect RealView HBI numbers

Pull s390 updates from Martin Schwidefsky:
 "The s390 patches for the 4.7 merge window have the usual bug fixes and
  cleanups, and the following new features:

   - An interface for dasd driver to query if a volume is online to
     another operating system

   - A new ioctl for the dasd driver to verify the format for a range of
     tracks

   - Following the example of x86 the struct fpu is now allocated with
     the task_struct

   - The 'report_error' interface for the PCI bus to send an
     adapter-error notification from user space to the service element
     of the machine"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits)
  s390/vmem: remove unused function parameter
  s390/vmem: fix identity mapping
  s390: add missing include statements
  s390: add missing declarations
  s390: make couple of variables and functions static
  s390/cache: remove superfluous locking
  s390/cpuinfo: simplify locking and skip offline cpus early
  s390/3270: hangup the 3270 tty after a disconnect
  s390/3270: handle reconnect of a tty with a different size
  s390/3270: avoid endless I/O loop with disconnected 3270 terminals
  s390/3270: fix garbled output on 3270 tty view
  s390/3270: fix view reference counting
  s390/3270: add missing tty_kref_put
  s390/dumpstack: implement and use return_address()
  s390/cpum_sf: Remove superfluous SMP function call
  s390/cpum_cf: Remove superfluous SMP function call
  s390/Kconfig: make z196 the default processor type
  s390/sclp: avoid compile warning in sclp_pci_report
  s390/fpu: allocate 'struct fpu' with the task_struct
  s390/crypto: cleanup and move the header with the cpacf definitions
  ...

My laptop that uses the intel 7680 iwlwifi module would no longer
connects to the network.  It would fail with a "Microcode SW error
detected." and spew out register state over and over again without ever
connecting to the network.

The cause is mis-merge in commit 909b27f7, where David seems to have
lost some of the changes to iwl_mvm_set_tx_cmd() from commit
5c08b0f5 ("iwlwifi: mvm: don't override the rate with the AMSDU
len").

The reason seems to be a conflict with commit d8fe4844 ("iwlwifi:
mvm: add support for new TX CMD API"), which touched a line adjacent to
the changes in 909b27f7.

David missed the fact that "info->driver_data[0]" had become
"skb_info->driver_data[0]".  Then he removed the skb_info because it was
unused.

This just re-updates iwl_mvm_set_tx_cmd() with the lost two lines.
Reported-and-tested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reported-by: NReinoud Koornstra <reinoudkoornstra@gmail.com>
Cc: Luciano Coelho <luciano.coelho@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull misc vfs cleanups from Al Viro:
 "Assorted cleanups and fixes all over the place"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  coredump: only charge written data against RLIMIT_CORE
  coredump: get rid of coredump_params->written
  ecryptfs_lookup(): try either only encrypted or plaintext name
  ecryptfs: avoid multiple aliases for directories
  bpf: reject invalid names right in ->lookup()
  __d_alloc(): treat NULL name as QSTR("/", 1)
  mtd: switch ubi_open_volume_path() to vfs_stat()
  mtd: switch open_mtd_by_chdev() to use of vfs_stat()

Pull iov_iter cleanups from Al Viro.

* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fold checks into iterate_and_advance()
  rw_verify_area(): saner calling conventions
  aio: remove a pointless assignment

Pull parallel lookup fixups from Al Viro:
 "Fix for xfs parallel readdir (turns out the cxfs exposure was not
  enough to catch all problems), and a reversion of btrfs back to
  ->iterate() until the fs/btrfs/delayed-inode.c gets fixed"

* 'work.lookups' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  xfs: concurrent readdir hangs on data buffer locks
  Revert "btrfs: switch to ->iterate_shared()"

There's a three-process deadlock involving shared/exclusive barriers
and inverted lock orders in the directory readdir implementation.
It's a pre-existing problem with lock ordering, exposed by the
VFS parallelisation code.

process 1               process 2               process 3
---------               ---------               ---------
readdir
iolock(shared)
  get_leaf_dents
    iterate entries
       ilock(shared)
       map, lock and read buffer
       iunlock(shared)
       process entries in buffer
       .....
                                                readdir
                                                iolock(shared)
                                                  get_leaf_dents
                                                    iterate entries
                                                      ilock(shared)
                                                      map, lock buffer
                                                      <blocks>
                        finish ->iterate_shared
                        file_accessed()
                          ->update_time
                            start transaction
                            ilock(excl)
                            <blocks>
        .....
        finishes processing buffer
        get next buffer
          ilock(shared)
          <blocks>

And that's the deadlock.

Fix this by dropping the current buffer lock in process 1 before
trying to map the next buffer. This means we keep the lock order of
ilock -> buffer lock intact and hence will allow process 3 to make
progress and drop it's ilock(shared) once it is done.
Reported-by: NXiong Zhou <xzhou@redhat.com>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This reverts commit 972b241f.
Quoth Chris:
	didn't take the delayed inode stuff into account
	it got an rbtree of items and it pulls things out
	so in shared mode, its hugely racey
	sorry, lets revert and fix it for real inside of btrfs
Signed-off-by: NChris Mason <clm@fb.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull cifs iovec cleanups from Al Viro.

* 'sendmsg.cifs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  cifs: don't bother with kmap on read_pages side
  cifs_readv_receive: use cifs_read_from_socket()
  cifs: no need to wank with copying and advancing iovec on recvmsg side either
  cifs: quit playing games with draining iovecs
  cifs: merge the hash calculation helpers

Pull remaining vfs xattr work from Al Viro:
 "The rest of work.xattr (non-cifs conversions)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  btrfs: Switch to generic xattr handlers
  ubifs: Switch to generic xattr handlers
  jfs: Switch to generic xattr handlers
  jfs: Clean up xattr name mapping
  gfs2: Switch to generic xattr handlers
  ceph: kill __ceph_removexattr()
  ceph: Switch to generic xattr handlers
  ceph: Get rid of d_find_alias in ceph_set_acl

Pull cifs updates from Steve French:
 "Various small CIFS and SMB3 fixes (including some for stable)"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  remove directory incorrectly tries to set delete on close on non-empty directories
  Update cifs.ko version to 2.09
  fs/cifs: correctly to anonymous authentication for the NTLM(v2) authentication
  fs/cifs: correctly to anonymous authentication for the NTLM(v1) authentication
  fs/cifs: correctly to anonymous authentication for the LANMAN authentication
  fs/cifs: correctly to anonymous authentication via NTLMSSP
  cifs: remove any preceding delimiter from prefix_path
  cifs: Use file_dentry()

Pull libata updates from Tejun Heo:
 "Trivial changes except for special case timeout bumping.

  I have two more libata branches which depend on SCSI and dmaengine
  tree respectively.  I'll send pull requests for them once the
  prerequisite trees are pulled in"

* 'for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata-scsi: use %*ph to dump small buffers
  treewide: Fix typos in libata.xml
  libata-core: Allow longer timeout for drive spinup from PUIS
  libata: Fixup awkward whitespace in warning by removing line continuation.

Merge tag 'regulator-fix-can-change-voltage' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "Fix build warnings from regulator_can_change_voltage()

  Cut down on noise for mainstream users of the API and people
  doing build testing by dropping the deprecated flag from
  regulator_can_change_voltage() as it triggers even on the
  EXPORT_SYMBOL_GPL() which affects all builds rather than just
  the remaining drivers with calls to it (for which fixes are
  currently pending).

  The function remains deprecated and is expected to be removed
  entirely in v4.8"

* tag 'regulator-fix-can-change-voltage' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Silence build warnings from regulator_can_change_voltage()

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for kernel cycle v4.7:

  Core infrastructural changes:

   - Support for natively single-ended GPIO driver stages.

     This means that if the hardware has registers to configure open
     drain or open source configuration, we use that rather than (as we
     did before) try to emulate it by switching the line to an input to
     get high impedance.

     This is also documented throughly in Documentation/gpio/driver.txt
     for those of you who did not understand one word of what I just
     wrote.

   - Start to do away with the unnecessarily complex and unitelligible
     ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another
     evolutional artifact from the time when the GPIO subsystem was
     unmaintained.

     Archs can now just select GPIOLIB and be done with it, cleanups to
     arches will trickle in for the next kernel.  Some minor archs ACKed
     the changes immediately so these are included in this pull request.

   - Advancing the use of the data pointer inside the GPIO device for
     storing driver data by switching the PowerPC, Super-H Unicore and
     a few other subarches or subsystem drivers in ALSA SoC, Input,
     serial, SSB, staging etc to use it.

   - The initialization now reads the input/output state of the GPIO
     lines, so that each GPIO descriptor knows - if this callback is
     implemented - whether the line is input or output.  This also
     reflects nicely in userspace "lsgpio".

   - It is now possible to name GPIO producer names, line names, from
     the device tree.  (Platform data has been supported for a while).
     I bet we will get a similar mechanism for ACPI one of those days.
     This makes is possible to get sensible producer names for e.g.
     GPIO rails in "lsgpio" in userspace.

  New drivers:

   - New driver for the Loongson1.

   - The XLP driver now supports Broadcom Vulcan ARM64.

   - The IT87 driver now supports IT8620 and IT8628.

   - The PCA953X driver now supports Galileo Gen2.

  Driver improvements:

   - MCP23S08 was switched to use the gpiolib irqchip helpers and now
     also suppors level-triggered interrupts.

   - 74x164 and RCAR now supports the .set_multiple() callback

   - AMDPT was converted to use generic GPIO.

   - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
     support the new single ended callback for open drain and in some
     cases open source.

   - Implement the .get_direction() callback for a few more drivers like
     PL061, Xgene.

  Cleanups:

   - Paul Gortmaker combed through the drivers and de-modularized those
     who are not really modules.

   - Move the GPIO poweroff DT bindings to the power subdir where they
     belong.

   - Rename gpio-generic.c to gpio-mmio.c, which is much more to the
     point.  That's what it is handling, nothing more, nothing less"

* tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits)
  MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
  gpio: zevio: make it explicitly non-modular
  gpio: timberdale: make it explicitly non-modular
  gpio: stmpe: make it explicitly non-modular
  gpio: sodaville: make it explicitly non-modular
  pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error
  gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms
  gpio: dt-bindings: add wd,mbl-gpio bindings
  gpio: of: make it possible to name GPIO lines
  gpio: make gpiod_to_irq() return negative for NO_IRQ
  gpio: xgene: implement .get_direction()
  gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver
  gpio: tegra: Implement gpio_get_direction callback
  gpio: set up initial state from .get_direction()
  gpio: rename gpio-generic.c into gpio-mmio.c
  gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case
  gpio: dwapb: add gpio-signaled acpi event support
  gpio: dwapb: convert device node to fwnode
  gpio: dwapb: remove name from dwapb_port_property
  gpio/qoriq: select IRQ_DOMAIN
  ...

Pull HID updates from Jiri Kosina:
 "No biggies this time:

   - micro-optimization of implement() in HID core parses, from Dmitry
     Torokhov

   - thingm driver cleanups from Heiner Kallweit

   - fine-graining detection of distance and tilt axes in wacom driver
     from Jason Gerecke

   - New hid-asus driver, currently supporting X205TA and VivoBook
     E200HA, from Yusuke Fujimaki"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: Add fuzz factor to distance and tilt axes
  HID: usbhid: quirks for Corsair RGB keyboard & mice (K70R, K95RGB, M65RGB, K70RGB, K65RGB)
  HID: thingm: remove not needed error message
  HID: thingm: set new flag LED_HW_PLUGGABLE
  HID: thingm: factor out duplicated code to thingm_init_led
  HID: simplify implement() a bit
  HID: asus: add support for VivoBook E200HA
  HID: hidraw: silence an uninitialized variable warning
  HID: roccat: silence an uninitialized variable warning
  HID: Asus X205TA keyboard driver
  HID: hidraw: switch to using memdup_user

Pull livepatching updates from Jiri Kosina:

 - remove of our own implementation of architecture-specific relocation
   code and leveraging existing code in the module loader to perform
   arch-dependent work, from Jessica Yu.

   The relevant patches have been acked by Rusty (for module.c) and
   Heiko (for s390).

 - live patching support for ppc64le, which is a joint work of Michael
   Ellerman and Torsten Duwe.  This is coming from topic branch that is
   share between livepatching.git and ppc tree.

 - addition of livepatching documentation from Petr Mladek

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: make object/func-walking helpers more robust
  livepatch: Add some basic livepatch documentation
  powerpc/livepatch: Add live patching support on ppc64le
  powerpc/livepatch: Add livepatch stack to struct thread_info
  powerpc/livepatch: Add livepatch header
  livepatch: Allow architectures to specify an alternate ftrace location
  ftrace: Make ftrace_location_range() global
  livepatch: robustify klp_register_patch() API error checking
  Documentation: livepatch: outline Elf format and requirements for patch modules
  livepatch: reuse module loader code to write relocations
  module: s390: keep mod_arch_specific for livepatch modules
  module: preserve Elf information for livepatch modules
  Elf: add livepatch-specific Elf constants

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (21 commits)
  gitignore: fix wording
  mfd: ab8500-debugfs: fix "between" in printk
  memstick: trivial fix of spelling mistake on management
  cpupowerutils: bench: fix "average"
  treewide: Fix typos in printk
  IB/mlx4: printk fix
  pinctrl: sirf/atlas7: fix printk spelling
  serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/
  w1: comment spelling s/minmum/minimum/
  Blackfin: comment spelling s/divsor/divisor/
  metag: Fix misspellings in comments.
  ia64: Fix misspellings in comments.
  hexagon: Fix misspellings in comments.
  tools/perf: Fix misspellings in comments.
  cris: Fix misspellings in comments.
  c6x: Fix misspellings in comments.
  blackfin: Fix misspelling of 'register' in comment.
  avr32: Fix misspelling of 'definitions' in comment.
  treewide: Fix typos in printk
  Doc: treewide : Fix typos in DocBook/filesystem.xml
  ...

Pull networking updates from David Miller:
 "Highlights:

   1) Support SPI based w5100 devices, from Akinobu Mita.

   2) Partial Segmentation Offload, from Alexander Duyck.

   3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.

   4) Allow cls_flower stats offload, from Amir Vadai.

   5) Implement bpf blinding, from Daniel Borkmann.

   6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
      actually using FASYNC these atomics are superfluous.  From Eric
      Dumazet.

   7) Run TCP more preemptibly, also from Eric Dumazet.

   8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
      driver, from Gal Pressman.

   9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.

  10) Improve BPF usage documentation, from Jesper Dangaard Brouer.

  11) Support tunneling offloads in qed, from Manish Chopra.

  12) aRFS offloading in mlx5e, from Maor Gottlieb.

  13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
      Leitner.

  14) Add MSG_EOR support to TCP, this allows controlling packet
      coalescing on application record boundaries for more accurate
      socket timestamp sampling.  From Martin KaFai Lau.

  15) Fix alignment of 64-bit netlink attributes across the board, from
      Nicolas Dichtel.

  16) Per-vlan stats in bridging, from Nikolay Aleksandrov.

  17) Several conversions of drivers to ethtool ksettings, from Philippe
      Reynes.

  18) Checksum neutral ILA in ipv6, from Tom Herbert.

  19) Factorize all of the various marvell dsa drivers into one, from
      Vivien Didelot

  20) Add VF support to qed driver, from Yuval Mintz"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
  Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
  Revert "phy dp83867: Make rgmii parameters optional"
  r8169: default to 64-bit DMA on recent PCIe chips
  phy dp83867: Make rgmii parameters optional
  phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
  bpf: arm64: remove callee-save registers use for tmp registers
  asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
  switchdev: pass pointer to fib_info instead of copy
  net_sched: close another race condition in tcf_mirred_release()
  tipc: fix nametable publication field in nl compat
  drivers: net: Don't print unpopulated net_device name
  qed: add support for dcbx.
  ravb: Add missing free_irq() calls to ravb_close()
  qed: Remove a stray tab
  net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fec-mpc52xx: use phydev from struct net_device
  bpf, doc: fix typo on bpf_asm descriptions
  stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
  net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fs-enet: use phydev from struct net_device
  ...

The btrfs_{set,remove}xattr inode operations check for a read-only root
(btrfs_root_readonly) before calling into generic_{set,remove}xattr.  If
this check is moved into __btrfs_setxattr, we can get rid of
btrfs_{set,remove}xattr.

This patch applies to mainline, I would like to keep it together with
the other xattr cleanups if possible, though.  Could you please review?

Thanks,
Andreas
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Ubifs internally uses special inodes for storing xattrs. Those inodes
had NULL {get,set,remove}xattr inode operations before this change, so
xattr operations on them would fail. The super block's s_xattr field
would also apply to those special inodes. However, the inodes are not
visible outside of ubifs, and so no xattr operations will ever be
carried out on them anyway.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull device mapper updates from Mike Snitzer:

 - based on Jens' 'for-4.7/core' to have DM thinp's discard support use
   bio_inc_remaining() and the block core's new async __blkdev_issue_discard()
   interface

 - make DM multipath's fast code-paths lockless, using lockless_deference,
   to significantly improve large NUMA performance when using blk-mq.
   The m->lock spinlock contention was a serious bottleneck.

 - a few other small code cleanups and Documentation fixes

* tag 'dm-4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin: unroll issue_discard() to create longer discard bio chains
  dm thin: use __blkdev_issue_discard for async discard support
  dm thin: remove __bio_inc_remaining() and switch to using bio_inc_remaining()
  dm raid: make sure no feature flags are set in metadata
  dm ioctl: drop use of __GFP_REPEAT in copy_params()'s __vmalloc() call
  dm stats: fix spelling mistake in Documentation
  dm cache: update cache-policies.txt now that mq is an alias for smq
  dm mpath: eliminate use of spinlock in IO fast-paths
  dm mpath: move trigger_event member to the end of 'struct multipath'
  dm mpath: use atomic_t for counting members of 'struct multipath'
  dm mpath: switch to using bitops for state flags
  dm thin: Remove return statement from void function
  dm: remove unused mapped_device argument from free_tio()

Pull block driver updates from Jens Axboe:
 "On top of the core pull request, this is the drivers pull request for
  this merge window.  This contains:

   - Switch drivers to the new write back cache API, and kill off the
     flush flags.  From me.

   - Kill the discard support for the STEC pci-e flash driver.  It's
     trivially broken, and apparently unmaintained, so it's safer to
     just remove it.  From Jeff Moyer.

   - A set of lightnvm updates from the usual suspects (Matias/Javier,
     and Simon), and fixes from Arnd, Jeff Mahoney, Sagi, and Wenwei
     Tao.

   - A set of updates for NVMe:

        - Turn the controller state management into a proper state
          machine.  From Christoph.

        - Shuffling of code in preparation for NVMe-over-fabrics, also
          from Christoph.

        - Cleanup of the command prep part from Ming Lin.

        - Rewrite of the discard support from Ming Lin.

        - Deadlock fix for namespace removal from Ming Lin.

        - Use the now exported blk-mq tag helper for IO termination.
          From Sagi.

        - Various little fixes from Christoph, Guilherme, Keith, Ming
          Lin, Wang Sheng-Hui.

   - Convert mtip32xx to use the now exported blk-mq tag iter function,
     from Keith"

* 'for-4.7/drivers' of git://git.kernel.dk/linux-block: (74 commits)
  lightnvm: reserved space calculation incorrect
  lightnvm: rename nr_pages to nr_ppas on nvm_rq
  lightnvm: add is_cached entry to struct ppa_addr
  lightnvm: expose gennvm_mark_blk to targets
  lightnvm: remove mgt targets on mgt removal
  lightnvm: pass dma address to hardware rather than pointer
  lightnvm: do not assume sequential lun alloc.
  nvme/lightnvm: Log using the ctrl named device
  lightnvm: rename dma helper functions
  lightnvm: enable metadata to be sent to device
  lightnvm: do not free unused metadata on rrpc
  lightnvm: fix out of bound ppa lun id on bb tbl
  lightnvm: refactor set_bb_tbl for accepting ppa list
  lightnvm: move responsibility for bad blk mgmt to target
  lightnvm: make nvm_set_rqd_ppalist() aware of vblks
  lightnvm: remove struct factory_blks
  lightnvm: refactor device ops->get_bb_tbl()
  lightnvm: introduce nvm_for_each_lun_ppa() macro
  lightnvm: refactor dev->online_target to global nvm_targets
  lightnvm: rename nvm_targets to nvm_tgt_type
  ...

Pull core block layer updates from Jens Axboe:
 "This is the core block IO changes for this merge window.  Nothing
  earth shattering in here, it's mostly just fixes.  In detail:

   - Fix for a long standing issue where wrong ordering in blk-mq caused
     order_to_size() to spew a warning.  From Bart.

   - Async discard support from Christoph.  Basically just splitting our
     sync interface into a submit + wait part.

   - Add a cleaner interface for flagging whether a device has a write
     back cache or not.  We've previously overloaded blk_queue_flush()
     with this, but let's make it more explicit.  Drivers cleaned up and
     updated in the drivers pull request.  From me.

   - Fix for a double check for whether IO accounting is enabled or not.
     From Michael Callahan.

   - Fix for the async discard from Mike Snitzer, reinstating the early
     EOPNOTSUPP return if the device doesn't support discards.

   - Also from Mike, export bio_inc_remaining() so dm can drop it's
     private copy of it.

   - From Ming Lin, add support for passing in an offset for request
     payloads.

   - Tag function export from Sagi, which will be used in NVMe in the
     drivers pull.

   - Two blktrace related fixes from Shaohua.

   - Propagate NOMERGE flag when making a request from a bio, also from
     Shaohua.

   - An optimization to not parse cgroup paths in blk-throttle, if we
     don't need to.  From Shaohua"

* 'for-4.7/core' of git://git.kernel.dk/linux-block:
  blk-mq: fix undefined behaviour in order_to_size()
  blk-throttle: don't parse cgroup path if trace isn't enabled
  blktrace: add missed mask name
  blktrace: delete garbage for message trace
  block: make bio_inc_remaining() interface accessible again
  block: reinstate early return of -EOPNOTSUPP from blkdev_issue_discard
  block: Minor blk_account_io_start usage cleanup
  block: add __blkdev_issue_discard
  block: remove struct bio_batch
  block: copy NOMERGE flag from bio to request
  block: add ability to flag write back caching on a device
  blk-mq: Export tagset iter function
  block: add offset in blk_add_request_payload()
  writeback: Fix performance regression in wb_over_bg_thresh()

Pull vfs cleanups from Al Viro:
 "More cleanups from Christoph"

* 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  nfsd: use RWF_SYNC
  fs: add RWF_DSYNC aand RWF_SYNC
  ceph: use generic_write_sync
  fs: simplify the generic_write_sync prototype
  fs: add IOCB_SYNC and IOCB_DSYNC
  direct-io: remove the offset argument to dio_complete
  direct-io: eliminate the offset argument to ->direct_IO
  xfs: eliminate the pos variable in xfs_file_dio_aio_write
  filemap: remove the pos argument to generic_file_direct_write
  filemap: remove pos variables in generic_file_read_iter

Pull 'struct path' constification update from Al Viro:
 "'struct path' is passed by reference to a bunch of Linux security
  methods; in theory, there's nothing to stop them from modifying the
  damn thing and LSM community being what it is, sooner or later some
  enterprising soul is going to decide that it's a good idea.

  Let's remove the temptation and constify all of those..."

* 'work.const-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  constify ima_d_path()
  constify security_sb_pivotroot()
  constify security_path_chroot()
  constify security_path_{link,rename}
  apparmor: remove useless checks for NULL ->mnt
  constify security_path_{mkdir,mknod,symlink}
  constify security_path_{unlink,rmdir}
  apparmor: constify common_perm_...()
  apparmor: constify aa_path_link()
  apparmor: new helper - common_path_perm()
  constify chmod_common/security_path_chmod
  constify security_sb_mount()
  constify chown_common/security_path_chown
  tomoyo: constify assorted struct path *
  apparmor_path_truncate(): path->mnt is never NULL
  constify vfs_truncate()
  constify security_path_truncate()
  [apparmor] constify struct path * in a bunch of helpers

Pull cifs xattr updates from Al Viro:
 "This is the remaining parts of the xattr work - the cifs bits"

* 'for-cifs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  cifs: Switch to generic xattr handlers
  cifs: Fix removexattr for os2.* xattrs
  cifs: Check for equality with ACL_TYPE_ACCESS and ACL_TYPE_DEFAULT
  cifs: Fix xattr name checks

Pull UDF fixes from Jan Kara:
 "A fix for UDF crash on corrupted media and one UDF header fixup"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Export superblock magic to userspace
  udf: Prevent stack overflow on corrupted filesystem mount

Pull jfs updates from Dave Kleikamp:
 "Some jfs logging cleanups from Joe Perches"

* tag 'jfs-4.7' of git://github.com/kleikamp/linux-shaggy:
  jfs: Coalesce some formats
  jfs: Remove unnecessary line continuations and terminating newlines
  jfs: Remove terminating newlines from jfs_info, jfs_warn, jfs_err uses

This section of code initially looks redundant, but is required. This
improves the comment to explain more clearly why the reset is needed.
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NSerge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Wrong return code was being returned on SMB3 rmdir of
non-empty directory.

For SMB3 (unlike for cifs), we attempt to delete a directory by
set of delete on close flag on the open. Windows clients set
this flag via a set info (SET_FILE_DISPOSITION to set this flag)
which properly checks if the directory is empty.

With this patch on smb3 mounts we correctly return
 "DIRECTORY NOT EMPTY"
on attempts to remove a non-empty directory.
Signed-off-by: NSteve French <steve.french@primarydata.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: NSachin Prabhu <sprabhu@redhat.com>

Signed-off-by: NSteven French <steve.french@primarydata.com>

Only server which map unknown users to guest will allow
access using a non-null NTLMv2_Response.

For Samba it's the "map to guest = bad user" option.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913Signed-off-by: NStefan Metzmacher <metze@samba.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Only server which map unknown users to guest will allow
access using a non-null NTChallengeResponse.

For Samba it's the "map to guest = bad user" option.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913Signed-off-by: NStefan Metzmacher <metze@samba.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Only server which map unknown users to guest will allow
access using a non-null LMChallengeResponse.

For Samba it's the "map to guest = bad user" option.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913Signed-off-by: NStefan Metzmacher <metze@samba.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

See [MS-NLMP] 3.2.5.1.2 Server Receives an AUTHENTICATE_MESSAGE from the Client:

   ...
   Set NullSession to FALSE
   If (AUTHENTICATE_MESSAGE.UserNameLen == 0 AND
      AUTHENTICATE_MESSAGE.NtChallengeResponse.Length == 0 AND
      (AUTHENTICATE_MESSAGE.LmChallengeResponse == Z(1)
       OR
       AUTHENTICATE_MESSAGE.LmChallengeResponse.Length == 0))
       -- Special case: client requested anonymous authentication
       Set NullSession to TRUE
   ...

Only server which map unknown users to guest will allow
access using a non-null NTChallengeResponse.

For Samba it's the "map to guest = bad user" option.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913

CC: Stable <stable@vger.kernel.org>
Signed-off-by: NStefan Metzmacher <metze@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

We currently do not check if any delimiter exists before the prefix
path in cifs_compose_mount_options(). Consequently when building the
devname using cifs_build_devname() we can end up with multiple
delimiters separating the UNC and the prefix path.

An issue was reported by the customer mounting a folder within a DFS
share from a Netapp server which uses McAfee antivirus. We have
narrowed down the cause to the use of double backslashes in the file
name used to open the file. This was determined to be caused because of
additional delimiters as a result of the bug.

In addition to changes in cifs_build_devname(), we also fix
cifs_parse_devname() to ignore any preceding delimiter for the prefix
path.

The problem was originally reported on RHEL 6 in RHEL bz 1252721. This
is the upstream version of the fix. The fix was confirmed by looking at
the packet capture of a DFS mount.
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

CIFS may be used as lower layer of overlayfs and accessing f_path.dentry can
lead to a crash.

Fix by replacing direct access of file->f_path.dentry with the
file_dentry() accessor, which will always return a native object.
Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Acked-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

This reverts commit 7f32541c.

This needs reverting too, as per requests.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 81003bc9.

Developers have asked me to revert this for now.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>