Fix printk format build warning:

net/sunrpc/xprtrdma/verbs.c:1463: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'dma_addr_t'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

'req' is dereferenced before checked for NULL.
The patch simply removes the check.

Signed-off-by: Jinqiu Yang<crindy646@gmail.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Commit 45a52a02 (NFS move nfs_client
initialization into nfs_get_client) introduces a new warning in
fs/nfs/idmap.c:

	‘struct rpc_timeout’ declared inside parameter list

Fix it by adding a forward declaration for the struct rpc_timeout
in include/linux/nfs_xdr.h
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Factor out some cut-and-paste code in options parsing.
Saves about 800 bytes on x86-64.
Signed-off-by: NRob Landley <rlandley@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Eliminate two mostly duplicate functions (nfs_parse_simple_hostname()
and nfs_parse_protected_hostname()) and instead just make the calling
function (nfs_parse_devname()) do everything.
Signed-off-by: NRob Landley <rlandley@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Account NFS direct-io reads and writes into Task I/O Accounting.
Do it before complition to handle aio.

NFS have unusual direct-io implementation,
thus accounting in generic code does not work.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Make the value in gm_upcall_enctypes just the enctype values.
This allows the values to be used more easily elsewhere.
Signed-off-by: NKevin Coffman <kwc@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When the rpc_memreg_strategy is 5, FRMR are used to map RPC data.
This mode uses an FRMR to map the RPC data, then invalidates
(i.e. unregisers) the data in xprt_rdma_free. These FRMR are used
across connections on the same mount, i.e. if the connection goes
away on an idle timeout and reconnects later, the FRMR are not
destroyed and recreated.

This creates a problem for transport errors because the WR that
invalidate an FRMR may be flushed (i.e. fail) leaving the
FRMR valid. When the FRMR is later used to map an RPC it will fail,
tearing down the transport and starting over. Over time, more and
more of the FRMR pool end up in the wrong state resulting in
seemingly random disconnects.

This fix keeps track of the FRMR state explicitly by setting it's
state based on the successful completion of a reg/inv WR. If the FRMR
is ever used and found to be in the wrong state, an invalidate WR
is prepended, re-syncing the FRMR state and avoiding the connection loss.
Signed-off-by: NTom Tucker <tom@ogc.us>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The RPCRDMA marshalling logic assumed that xdr->page_base was an
offset into the first page of xdr->page_list. It is in fact an
offset into the xdr->page_list itself, that is, it selects the
first page in the page_list and the offset into that page.

The symptom depended in part on the rpc_memreg_strategy, if it was
FRMR, or some other one-shot mapping mode, the connection would get
torn down on a base and bounds error. When the badly marshalled RPC
was retransmitted it would reconnect, get the error, and tear down the
connection again in a loop forever. This resulted in a hung-mount. For
the other modes, it would result in silent data corruption. This bug is
most easily reproduced by writing more data than the filesystem
has space for.

This fix corrects the page_base assumption and otherwise simplifies
the iov mapping logic.
Signed-off-by: NTom Tucker <tom@ogc.us>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The new behaviour is enabled using the new module parameter
'nfs4_disable_idmapping'.

Note that if the server rejects an unmapped uid or gid, then
the client will automatically switch back to using the idmapper.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This will be required in order to switch uid/gid mapping back on if the
admin has tried to disable it.

Note that we also propagate NFS4ERR_BADNAME at the same time, in order to
work around a Linux server bug.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...instead of the nfs_client.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Allowing stripe_unit==0 causes the client to crash later on
when dividing by zero.
Reported-by: NMarc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Now that we have access to the pointer, clear it immediately after
the put, instead of in caller.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This will make it possible to clear the lseg pointer in the same
function as it is put, instead of in the caller nfs_pageio_doio().
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Allows the pnfs filelayout driver to write to the data servers.

Note that COMMIT to data servers will be implemented in a future
patch.  To avoid improper behavior, for the moment any WRITE to a data
server that would also require a COMMIT to the data server is sent
NFS_FILE_SYNC.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Any WRITE compound directed to a data server needs to have the
GETATTR calls suppressed.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@fieldses.org>
Signed-off-by: NMike Sager <sager@netapp.com>
Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We grab the lseg sent in from the doio function and attach it to
each struct nfs_write_data created.  This is how the lseg will be
sent to the layout driver.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add callback that pnfs layout driver can use to do its own handling
of data server WRITE response.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Reorder nfs_write_rpcsetup, preparing for a pnfs entry point.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If a data server is unavailable, go through MDS.

Mark the deviceid containing the data server as a negative cache entry.
Do not try to connect to any data server on a deviceid marked as a negative
cache entry. Mark any layout that tries to use the marked deviceid as failed.

Inodes with a layout marked as fails will not use the layout for I/O, and will
not perform any more layoutgets.
Inodes without a layout will still do layoutget, but the layout will get
marked immediately.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

No need for generic cache with only one user.
Keep a simple hash of deviceids in the filelayout driver.
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Acked-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use our own async error handler.
Mark the layout as failed and retry i/o through the MDS on specified errors.

Update the mds_offset in nfs_readpage_retry so that a failed short-read retry
to a DS gets correctly resent through the MDS.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Attempt a pNFS file layout read by setting up the nfs_read_data struct and
calling nfs_initiate_read with the data server rpc client and the
filelayout rpc call ops.

Error handling is implemented in a subsequent patch.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com>
Tested-by: NGuo Mingyang <guomingyang@nrchpc.ac.cn>
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Prepare for filelayout_read_pagelist with helper functions that find the correct
data server, filehandle, and offset.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NMike Sager <sager@netapp.com>
Signed-off-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NTigran Mkrtchyan <tigran@anahit.desy.de>
Signed-off-by: NTigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Introduce a data server set_client and init session following the
nfs4_set_client and  nfs4_init_session convention.

Once a new nfs_client is on the nfs_client_list, the nfs_client cl_cons_state
serializes access to creating an nfs_client struct with matching properties.

Use the new nfs_get_client() that initializes new clients.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Separate the rpc run portion of nfs_read_rpcsetup into a new function
nfs_initiate_read that is called for normal NFS I/O.

Add a pNFS read_pagelist function that is called instead of nfs_intitate_read
for pNFS reads.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NMike Sager <sager@netapp.com>
Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move the pnfs_update_layout call location to nfs_pageio_do_add_request().
Grab the lseg sent in the doio function to nfs_read_rpcsetup and attach
it to each nfs_read_data so it can be sent to the layout driver.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add a pg_test layout driver hook which is used to avoid coelescing I/O across
layout stripes.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Prepare put_lseg and get_lseg to be called from the pNFS I/O code.
Pull common code from pnfs_lseg_locked to call from pnfs_lseg.
Inline pnfs_lseg_locked into it's only caller.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The DS only role cannot be used to mount.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Data servers cannot send nfs4_proc_get_lease_time. but still need to setup
state renewal. Add the NFS_CS_CHECK_LEASE_TIME bit to indicate if the lease
time can be checked.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Data servers not sharing a session with the mount MDS always have an empty
cl_superblocks list.
Replace the cl_superblocks empty list check to see if it is time to shut down
renewd with the NFS_CS_STOP_RENEW bit which is not set by such a data server.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Data servers require a zero stateid seqid, and there is no advantage to not
doing the same for all NFSv4.1
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>