Update defconfigs for symbols that have moved around, without their
value changing.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This is purely cosmetic, but does look nicer IMHO:

Before:

  task: c000000001453400 task.stack: c000000001c6c000
  NIP: c000000000a0fbfc LR: c000000000a0fbf4 CTR: c000000000ba6220
  REGS: c0000001fffef820 TRAP: 0300   Not tainted  (4.13.0-rc6-gcc-6.3.1-00234-g423af27f7d81)
  MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 88088242  XER: 00000000
  CFAR: c0000000000b3488 DAR: 0000000000000000 DSISR: 42000000 SOFTE: 0

After:
  task: c000000001453400 task.stack: c000000001c6c000
  NIP:  c000000000a0fbfc LR: c000000000a0fbf4 CTR: c000000000ba6220
  REGS: c0000001fffef820 TRAP: 0300   Not tainted  (4.13.0-rc6-gcc-6.3.1-00234-g423af27f7d81-dirty)
  MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 88088242  XER: 00000000
  CFAR: c0000000000b34a4 DAR: 0000000000000000 DSISR: 42000000 SOFTE: 0
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Somehow we missed this when the pr_cont() changes went in. Fix CR/XER
to go on the same line as MSR, as they have historically, eg:

  MSR: 8000000000009032 <SF,EE,ME,IR,DR,RI>  CR: 4804408a  XER: 20000000
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Just because it looks less gross.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Although the MSR tells you what endian you're in it's possible that
isn't the same endian the kernel was built for, and if that happens
you're usually having a very bad day. So print a marker to make
it 100% clear which endian the kernel was built for.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When we oops we print a few markers for significant config options
such as PREEMPT, SMP etc. Currently these appear on separate lines
because we're not using pr_cont() properly. Fix it.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When building a random powerpc kernel I hit this build error:

  arch/powerpc/platforms/powernv/opal-imc.c:130:13: error : assignment
  discards « const » qualifier from pointer target type
  [-Werror=discarded-qualifiers]
     l_cpumask = cpumask_of_node(nid);
             ^

This happens because when CONFIG_NUMA=n cpumask_of_node() returns a
const pointer.

This patch simply adds const to l_cpumask to fix this issue.
Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: NMadhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Flesh out change log]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

CONFIG_PPC_MEMTRACE must be set to use this feature. This can only be
used on powernv platforms.
Signed-off-by: NRashmica Gupta <rashmica.g@gmail.com>
[mpe: Update dates and kernel versions, mention size is in bytes]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The hardware trace macro feature requires access to a chunk of real
memory. This patch provides a debugfs interface to do this. By
writing an integer containing the size of memory to be unplugged into
/sys/kernel/debug/powerpc/memtrace/enable, the code will attempt to
remove that much memory from the end of each NUMA node.

This patch also adds additional debugsfs files for each node that
allows the tracer to interact with the removed memory, as well as
a trace file that allows userspace to read the generated trace.

Note that this patch does not invoke the hardware trace macro, it
only allows memory to be removed during runtime for the trace macro
to utilise.
Signed-off-by: NRashmica Gupta <rashmica.g@gmail.com>
[mpe: Minor formatting etc fixups]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This helper is used to detect if a uprobe'd function has returned
through a setjmp/longjmp, rather than branching to the LR that was
updated previously by us. This fixes a SIGSEGV that gets generated when
programs use setjmp/longjmp with uretprobes.

We use the arm64 model (arch/arm64/kernel/probes/uprobes.c:
arch_uretprobe_is_alive()) for detecting when stack frames have been
removed from under us.

Reference:
https://marc.info/?l=linux-kernel&m=143748610330073
commit 7b868e48 ("uprobes/x86: Reimplement arch_uretprobe_is_alive()")
commit db087ef6 ("uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more
clever")

Tested with the test program from:
https://sourceware.org/git/gitweb.cgi?p=systemtap.git;a=blob;f=testsuite/systemtap.base/bz5274.c;hb=HEAD

And this script:
    $ cat test.sh
    #!/bin/bash

    perf probe -x ./bz5274 -a bz5274_main_return=main%return
    perf probe -x ./bz5274 -a bz5274_funca_return=funca%return
    perf probe -x ./bz5274 -a bz5274_funcb_return=funcb%return
    perf probe -x ./bz5274 -a bz5274_funcc_return=funcc%return
    perf probe -x ./bz5274 -a bz5274_funcd_return=funcd%return

    perf record -e 'probe_bz5274:*' -aR ./bz5274
Reported-by: NGustavo Luiz Duarte <gduarte@redhat.com>
Reported-by: zsun@redhat.com
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We don't save/restore these across a trap, or with KPROBES_ON_FTRACE.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When called from xive_irq_startup(), the size of the cpumask can be
larger than nr_cpu_ids. This can result in a WARN_ON such as:

  WARNING: CPU: 10 PID: 1 at ../arch/powerpc/sysdev/xive/common.c:476 xive_find_target_in_mask+0x110/0x2f0
  ...
  NIP [c00000000008a310] xive_find_target_in_mask+0x110/0x2f0
  LR [c00000000008a2e4] xive_find_target_in_mask+0xe4/0x2f0
  Call Trace:
    xive_find_target_in_mask+0x74/0x2f0 (unreliable)
    xive_pick_irq_target.isra.1+0x200/0x230
    xive_irq_startup+0x60/0x180
    irq_startup+0x70/0xd0
    __setup_irq+0x7bc/0x880
    request_threaded_irq+0x14c/0x2c0
    request_event_sources_irqs+0x100/0x180
    __machine_initcall_pseries_init_ras_IRQ+0x104/0x134
    do_one_initcall+0x68/0x1d0
    kernel_init_freeable+0x290/0x374
    kernel_init+0x24/0x170
    ret_from_kernel_thread+0x5c/0x74

This happens because we're being called with our affinity mask set to
irq_default_affinity. That in turn was populated using
cpumask_setall(), which sets NR_CPUs worth of bits, not nr_cpu_ids
worth. Finally cpumask_weight() will return > nr_cpu_ids when passed a
mask which has > nr_cpu_ids bits set.

Fix it by limiting the value returned by cpumask_weight().
Signed-off-by: NCédric Le Goater <clg@kaod.org>
[mpe: Add change log details on actual cause]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

On modern CPUs the CTRL register is read-only except bit 63 which is
the run latch control. This means it can be updated with a mtspr
rather than mfspr/mtspr.

To accomodate older CPUs (Cell at least), where there are other bits
in the register, we still do a read/modify/write on pre 2.06 CPUs.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
[mpe: Update change log to mention 2.06 workaround]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

HVI interrupts have always used 0x500, so remove the dead branch.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

POWER9 host external interrupts use the h_virt_irq_common handler, so
use that to replay them rather than using the hardware_interrupt_common
handler. Both call do_IRQ, but using the correct handler reduces
i-cache footprint.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This results in smaller code, and fewer branches. This relies on the
fact that both the 0xe80 and 0xa00 handlers call the same upper level
code, namely doorbell_exception().
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
[mpe: Mention we rely on the implementation of the 0xe80/0xa00 handlers]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Move the clearing of irq_happened bits into the condition where they
were found to be set. This reduces instruction count slightly, and
reduces stores into irq_happened.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Places in the kernel where r13 is not the PACA pointer must have
maskable interrupts disabled, so r13 does not have to be restored when
returning from a soft-masked interrupt. We should never have
interrupts soft disabled when we're in user space.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

MSR_EE is always enabled in SRR1 for masked interrupts, so we can use
xor to clear it.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Interrupts which do not require EE to be cleared can all be tested
with a single bitwise test.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

It's too big to be inline, there is no reason to keep it
that way.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Rework to incorporate the comment changes via fixes branch]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Instead of comparing the whole CPU mask every time, let's
keep a counter of how many bits are set in the mask. Thus
testing for a local mm only requires testing if that counter
is 1 and the current CPU bit is set in the mask.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We open-code testing for the mm being local to the current CPU
in a few places. Use our existing helper instead.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

It calls switch_mm() which already does the irq save/restore
these days.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Makes switch_mm_irqs_off() a bit more readable
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In __replay_interrupt() we take the address of a local label so we can
return to it later. However the assembler turns the local label into a
symbol with a name like ".L1^B42" - where "^B" is literally "\002".
This does not make for pleasant stack traces. Fix it by giving the
label a sensible name.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In preparation to stop storing the full node path in full_name, remove the
dependency on full_name from dlpar_attach_node(). Callers of
dlpar_attach_node() already have the parent device_node, so just pass the
parent node into dlpar_attach_node instead of the path. This avoids doing
a lookup of the parent node by the path.
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Scott Wood <oss@buserror.net>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently in the vio.c code we use a comparision against the parent
device node's full path to decide if the device is a PFO or VIO family
device.

Both the ibm,platform-facilities and vdevice nodes are defined by PAPR,
and must have a matching device_type. So instead of using the path we
can instead compare the device_type.

I've checked Qemu and kvmtool both do this correctly, and all the
PowerVM systems I have access to do also. So it seems to be safe.

This removes the dependency on full_name, which is being removed
upstream.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

There's a non-trivial dependency between some commits we want to put in
next and the KVM prefetch work around that went into fixes. So merge
fixes into next.

of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
    407	    576	      0	    983	    3d7	drivers/macintosh/rack-meter.o

File size after constify rackmeter_match.
   text	   data	    bss	    dec	    hex	filename
    807	    176	      0	    983	    3d7	drivers/macintosh/rack-meter.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

There is no guarantee that the various isync's involved with
the context switch will order the update of the CPU mask with
the first TLB entry for the new context being loaded by the HW.

Be safe here and add a memory barrier to order any subsequent
load/store which may bring entries into the TLB.

The corresponding barrier on the other side already exists as
pte updates use pte_xchg() which uses __cmpxchg_u64 which has
a sync after the atomic operation.

Cc: stable@vger.kernel.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NNicholas Piggin <npiggin@gmail.com>
[mpe: Add comments in the code]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We use mm cpumask for serializing against lockless page table walk.
Anybody who is doing a lockless page table walk is expected to disable
irq and only cpus in mm cpumask is expected do the lockless walk. This
ensure that a THP split can send IPI to only cpus in the mm cpumask,
to make sure there are no parallel lockless page table walk.

Add the CAPI fault handling cpu to the mm cpumask so that we can do
the lockless page table walk while inserting hash page table entries.
Reviewed-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now that we made sure that lockless walk of linux page table is mostly
limitted to current task(current->mm->pgdir) we can update the THP
update sequence to only send IPI to CPUs on which this task has run.
This helps in reducing the IPI overload on systems with large number
of CPUs.

WRT kvm even though kvm is walking page table with vpc->arch.pgdir,
it is done only on secondary CPUs and in that case we have primary CPU
added to task's mm cpumask. Sending an IPI to primary will force the
secondary to do a vm exit and hence this mm cpumask usage is safe
here.

WRT CAPI, we still end up walking linux page table with capi context
MM. For now the pte lookup serialization sends an IPI to all CPUs in
CPI is in use. We can further improve this by adding the CAPI
interrupt handling CPU to task mm cpumask. That will be done in a
later patch.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Bring in the commit to rename find_linux_pte_or_hugepte() which touches
arch and KVM code, and might need to be merged with the kvmppc tree to
avoid conflicts.

Add newer helpers to make the function usage simpler. It is always
recommended to use find_current_mm_pte() for walking the page table.
If we cannot use find_current_mm_pte(), it should be documented why
the said usage of __find_linux_pte() is safe against a parallel THP
split.

For now we have KVM code using __find_linux_pte(). This is because kvm
code ends up calling __find_linux_pte() in real mode with MSR_EE=0 but
with PACA soft_enabled = 1. We may want to fix that later and make
sure we keep the MSR_EE and PACA soft_enabled in sync. When we do that
we can switch kvm to use find_linux_pte().
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Use the newly introduced memset32() to pre-fill BPF page(s) with trap
instructions.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Based on Matthew Wilcox's patches for other architectures.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Cc: Markus Elfring <elfring@users.sourceforge.net>
Cc: Jim Paris <jim@jtan.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NGeoff Levand <geoff@infradead.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>