Fixes some build warnings such as:
drivers/scsi/qla2xxx/qla_attr.c:162:6: warning: format '%lx' expects argument of
type 'long unsigned int', but argument 6 has type 'size_t'"
and
drivers/scsi/qla2xxx/qla_init.c:5198:7: warning: format '%lx' expects argument
of type 'long unsigned int', but argument 5 has type 'uint32_t' [-Wformat]
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

udelay() does not work on some architectures for values above
2000, in particular on ARM:

ERROR: "__bad_udelay" [drivers/scsi/bfa/bfa.ko] undefined!
Reported-by: NVagrant Cascadian <vagrant@debian.org>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This change is about the following:
(1) If the number of targets is 16+ then default ring_pages to 32.
(2) Change default queue depth (per device) to 254.
(3) Implement change_queue_depth function so that queue_depth per device can
    be changed at run time. Honors the request only if coming from sysfs.
(4) Clean up the info returned by modinfo.
Signed-off-by: NArvind Kumar <arvindkumar@vmware.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This change allows pvscsi driver to coalesce I/O requests
before issuing them. The number of I/O's coalesced can be
dynamically configured based on the workload.
Signed-off-by: NRishi Mehta <rmehta@vmware.com>
Signed-off-by: NArvind Kumar <arvindkumar@vmware.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This change ensures that pvscsi_abort() function returns SUCCESS
only when the command in question was actually completed, otherwise
returns FAILURE. The code before change, was causing a bug where
driver tries to complete a command to the mid-layer while the mid-layer
has already requested the driver to abort that command, in response
to which the driver has responded with SUCCESS causing mid-layer
to free the command struct.
Signed-off-by: NArvind Kumar <arvindkumar@vmware.com>
Tested-by: NEwan Milne <emilne@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

It's a NOOP since 2.6.35 and it will be removed one day.

[jejb: remove from missed arm scsi drivers]
Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NAnil Gurumurthy <anil.gurumurthy@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Add the appropriate definition and table entry for new hardware support.
Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com>
Acked-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This patch adds formatting error overlay 0x21 to improve debug capabilities.

[jejb: checkpatch fixes]
Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com>
Acked-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

As result deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com>
Acked-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

There is no need to call pci_disable_msi() or pci_disable_msix()
in case the call to pci_enable_msi() or pci_enable_msix() failed.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com>
Acked-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

If, when the ipr driver loads, the adapter is in an EEH error state,
it will currently oops and not be able to recover, as it attempts
to access memory that has not yet been allocated. We've seen this
occur in some kexec scenarios. The following patch fixes the oops
and also allows the driver to recover from these probe time EEH errors.

[jejb: checkpatch fix]
Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Add the appropriate definition and table entry for new hardware support.
Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com>
Acked-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This patch removes extended delay bit on GSCSI reads/writes ops, the
performance will be significanly better.
Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com>
Acked-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This adds a module parameter to enable clustering.

Without enabling clustering support, the transfer length for read and
write scsi commands is limited upto 8MB when page size is 4KB and
sg_tablesize is 2048 (= SCSI_MAX_SG_CHAIN_SEGMENTS).  I would like to
test commands with more than that transfer length.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This change ensures that concurrent device access including ramdisk
storage, protection info, and provisioning map by read, write, and
unmap commands are protected with atomic_rw spinlock.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Currently, clustering support for scsi_debug is disabled.  This is
because there are for_each_sg() loops which assume that each sg list
element is consisted with a single page.  But enabling clustering
support, each sg list element for scsi commands can be consisted with
multiple pages.

This replaces these for_each_sg() loops with sg mapping iterator which
is capable of handling each sg list element is consisted with multiple
pages.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

When resp_xdwriteread() can't allocate temporary buffer, it returns -1.
But the return value is used as scsi status code and -1 is not
interpreted as correct code.

target_core_mod has similar xdwriteread emulation code. So this mimics
what target_core_mod does for xdwriteread when running out of memory.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

It is unnecessary to increase dif_errors in dif_verify(), because the
caller will increment it when dif_verify() detects failure.

This bug was introduced by commit beb40ea4 ("[SCSI] scsi_debug:
reduce duplication between prot_verify_read and prot_verify_write")
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

As pseudo_primary is only used in scsi_debug.c, it should be static.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Reading partially unwritten sectors generates a false positive logical
block reference tag check failure when DIF is enabled.

This bug is caused by missing ei_lba increment in loop of dif_verify()
when unwritten sector is skipped.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Avoid a spurious device get/put pair by cleaning up scsi_requeue_command
and folding scsi_unprep_request into it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Eliminate a get_device() / put_device() pair from scsi_next_command().
Both are atomic operations hence removing these slightly improves
performance.

[hch: slight changes due to different context]
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

SCSI devices may only be removed by calling scsi_remove_device().
That function must invoke blk_cleanup_queue() before the final put
of sdev->sdev_gendev. Since blk_cleanup_queue() waits for the
block queue to drain and then tears it down, scsi_request_fn cannot
be active anymore after blk_cleanup_queue() has returned and hence
the get_device()/put_device() pair in scsi_request_fn is unnecessary.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Many callers won't need this and we can optimize them away.  In addition
the handling in the __-prefixed variants was inconsistant to start with.

Based on an earlier patch from Bart Van Assche.

[jejb: fix kerneldoc probelm picked up by Fengguang Wu]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

If we don't have starved devices we don't need to take the host lock
to iterate over them.  Also split the function up to be more clear.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Avoid hitting the host-wide free_list lock unless we need to put a command
back onto the freelist.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Structure was already memset to zero at the top
of hpsa_scsi_ioaccel2_queue_command
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This allows exposing physical disks behind Smart
Array controllers to the OS (if the controller
has the right firmware and is in "hba" mode)
Signed-off-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

rc is set in the loop, and it isn't set back to zero anywhere
this patch fixes it
Signed-off-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Do not expose drives that are undergoing a format immediately
to the OS, instead wait until they are ready before bringing
them online.  This is so that logical drives created with
"rapid parity initialization" do not get immediately kicked
off the system for being unresponsive.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Evidently some wacky USB-ATA bridges don't recognize the SYNCHRONIZE
CACHE command, as shown in this email thread:

	http://marc.info/?t=138978356200002&r=1&w=2

The fact that we can't tell them to drain their caches shouldn't
prevent the system from going into suspend.  Therefore sd_sync_cache()
shouldn't return an error if the device replies with an Invalid
Command ASC.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: NSven Neumann <s.neumann@raumfeld.com>
Tested-by: NDaniel Mack <zonque@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

If a phy device is removed, the device can get error of I/O and HBA maybe
receieve IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS of event which causes pm8001_work_fn
to reset the phy device but in pm8001_task_exec we don't assign a value for
the device field of the ccb and in other case a ccb used have device field
set, when ccb is freed the field device of the ccb don't be set NULL.So there
is possibility of getting another device reset in function mpi_ssp_completion.
Signed-off-by: Nzhuxh <zxh3737@163.com>
Acked-by: NLindar Liu <lindar_liu@usish.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

In function pm8001_dev_gone_notify we consume a tag from bitmap resource and
later don't free that tag resource, so the tag resource will never be
freed. In the function we don't need to use any tag to issue command for
unregistering the device .
Signed-off-by: NXinHong Zhu <zxh3737@163.com>
Acked-by: NLindar Liu <lindar_liu@usish.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

When copying the st_modedef structures the devs pointers must be preserved
in the same way as with the cdevs pointers.

This fixes bug 70271: https://bugzilla.kernel.org/show_bug.cgi?id=70271

[  135.037052] BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
[  135.045048] IP: [<ffffffff812af6a1>] kernfs_find_ns+0x21/0x150
[  135.050999] PGD 220623067 PUD 222171067 PMD 0
[  135.055593] Oops: 0000 [#1] SMP
[  135.058938] Modules linked in: bnx2fc cnic uio fcoe libfcoe libfc 8021q mrp scsi_transport_fc garp scsi_tgt stp llc binfmt_misc dm_round_robin dm_multipath uinput iTCO_wdt iTCO_vendor_support microcode sg pcspkr serio_raw osst st(-) i2c_i801 lpc_ich mfd_core e1000e ptp pps_core ipmi_si ipmi_msghandler video tpm_infineon ext4(F) jbd2(F) mbcache(F) sd_mod(F) crc_t10dif(F) crct10dif_common(F) sr_mod(F) cdrom(F) pata_acpi(F) ata_generic(F) ata_piix(F) libata(F) mpt2sas(F) scsi_transport_sas(F) raid_class(F) ast(F) ttm(F) drm_kms_helper(F) drm(F) i2c_algo_bit(F) sysimgblt(F) sysfillrect(F) i2c_core(F) syscopyarea(F) dm_mirror(F) dm_region_hash(F) dm_log(F) dm_mod(F)
[  135.119686] CPU: 2 PID: 2028 Comm: rmmod Tainted: GF            3.14.0-rc1-linux-mainline+ #14
[  135.128453] Hardware name: wortmann To be filled by O.E.M./P8B-M Series, BIOS 6103 12/06/2012
[  135.137127] task: ffff880001de29d0 ti: ffff8802206e4000 task.ti: ffff8802206e4000
[  135.144742] RIP: 0010:[<ffffffff812af6a1>]  [<ffffffff812af6a1>] kernfs_find_ns+0x21/0x150
[  135.153148] RSP: 0018:ffff8802206e5c98  EFLAGS: 00010282
[  135.158562] RAX: ffff880001de29d0 RBX: 0000000000000000 RCX: 0000000000000006
[  135.165814] RDX: 0000000000000000 RSI: ffffffff817627e0 RDI: 0000000000000000
[  135.173040] RBP: ffff8802206e5cc8 R08: 0000000000000000 R09: 0000000000000001
[  135.180303] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff817627e0
[  135.187554] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
[  135.194774] FS:  00007f817c720700(0000) GS:ffff880227200000(0000) knlGS:0000000000000000
[  135.202995] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  135.208878] CR2: 0000000000000098 CR3: 00000002219b0000 CR4: 00000000000407e0
[  135.216139] Stack:
[  135.218185]  ffffffff81af63a0 0000000000000000 ffffffff817627e0 0000000000000000
[  135.225783]  0000000000000000 0000000000000001 ffff8802206e5cf8 ffffffff812af8de
[  135.233347]  ffff880226801900 ffffffff81b43320 0000000000000000 ffff880221a7c1c0
[  135.240972] Call Trace:
[  135.243463]  [<ffffffff812af8de>] kernfs_find_and_get_ns+0x3e/0x70
[  135.249743]  [<ffffffff812ae27d>] sysfs_unmerge_group+0x1d/0x60
[  135.255716]  [<ffffffff81464da9>] pm_qos_sysfs_remove_latency+0x19/0x20
[  135.262430]  [<ffffffff81466a91>] dev_pm_qos_constraints_destroy+0x31/0x1e0
[  135.269500]  [<ffffffff81464de6>] dpm_sysfs_remove+0x16/0x50
[  135.275263]  [<ffffffff8145c077>] device_del+0x47/0x1e0
[  135.280554]  [<ffffffff8145c232>] device_unregister+0x22/0x60
[  135.286406]  [<ffffffffa02e23bd>] remove_cdevs+0x4d/0x90 [st]
[  135.292247]  [<ffffffffa02e78ff>] st_remove+0x3f/0xb0 [st]
[  135.297851]  [<ffffffff8145f39f>] __device_release_driver+0x7f/0xf0
[  135.304237]  [<ffffffff8145f4e8>] driver_detach+0xd8/0xe0
[  135.309722]  [<ffffffff8145e0fc>] bus_remove_driver+0x5c/0xd0
[  135.315553]  [<ffffffff81460170>] driver_unregister+0x30/0x70
[  135.321366]  [<ffffffffa02e97f4>] exit_st+0x5c/0x868 [st]
[  135.326861]  [<ffffffff8111b31a>] SyS_delete_module+0x19a/0x1f0
[  135.332891]  [<ffffffff810e336d>] ? trace_hardirqs_on+0xd/0x10
[  135.338811]  [<ffffffff81141974>] ? __audit_syscall_entry+0x94/0x100
[  135.345282]  [<ffffffff8135b1fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  135.351806]  [<ffffffff816e8de9>] system_call_fastpath+0x16/0x1b
[  135.357859] Code: ff eb e3 0f 1f 80 00 00 00 00 55 48 89 e5 48 83 ec 30 48 89 5d d8 4c 89 65 e0 4c 89 6d e8 4c 89 75 f0 4c 89 7d f8 66 66 66 66 90 <44> 0f b7 bf 98 00 00 00 8b 05 71 6d 87 00 48 89 fb 49 89 f4 49
[  135.378282] RIP  [<ffffffff812af6a1>] kernfs_find_ns+0x21/0x150
[  135.384355]  RSP <ffff8802206e5c98>
[  135.387881] CR2: 0000000000000098
[  135.391298] ---[ end trace 1968409221ddb3c8 ]---
Signed-off-by: NMaurizio Lombardi <mlombard@redhat.com>
Acked-by: NKai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The following patch for megaraid_sas updates the driver version to
v06.803.01.00-rc1, and updates Documentation/scsi/ChangeLog.megaraid_sas.
Signed-off-by: NAdam Radford <aradford@gmail.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The following patch for megaraid_sas adds Dell PowerEdge VRTS SR-IOV VF
support (Device ID 0x002f).

This patch has some > 80 column lines that need to be left in place
for code readability purposes.
Signed-off-by: NAdam Radford <aradford@gmail.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The following patch for megaraid_sas will return leaked MPT frames from any
polled DCMD's that timeout to the MPT frame pool.
Signed-off-by: NAdam Radford <aradford@gmail.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>