Initialize jump_labels much, much earlier, so they're available for use
during system setup.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>

When a malformed loglevel value (for example "${abc}") is passed on the
kernel cmdline, the loglevel itself is being set to 0.

That then suppresses all following messages, including all the errors
and crashes caused by other malformed cmdline options.  This could make
debugging process quite tricky.

This patch leaves the previous value of loglevel if the new value is
incorrect and reports an error code in this case.
Signed-off-by: NAlexander Sverdlin <alexander.sverdlin@sysgo.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The core device layer sends tons of uevent notifications for each device
it finds, and if the kernel has been built with a non-empty
CONFIG_UEVENT_HELPER_PATH that will make us try to execute the usermode
helper binary for all these events very early in the boot.

Not only won't the root filesystem even be mounted at that point, we
literally won't have necessarily even initialized all the process
handling data structures at that point, which causes no end of silly
problems even when the usermode helper doesn't actually succeed in
executing.

So just use our existing infrastructure to disable the usermodehelpers
to make the kernel start out with them disabled.  We enable them when
we've at least initialized stuff a bit.

Problems related to an uninitialized

	init_ipc_ns.ids[IPC_SHM_IDS].rw_mutex

reported by various people.
Reported-by: NManuel Lauss <manuel.lauss@googlemail.com>
Reported-by: NRichard Weinberger <richard@nod.at>
Reported-by: NMarc Zyngier <maz@misterjones.org>
Acked-by: NKay Sievers <kay.sievers@vrfy.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While it's at its least, make a number of boring nitpicky cleanups to
shmem.c, mostly for consistency of variable naming.  Things like "swap"
instead of "entry", "pgoff_t index" instead of "unsigned long idx".

And since everything else here is prefixed "shmem_", better change
init_tmpfs() to shmem_init().
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a problem that kdump(2nd kernel) sometimes hangs up due
to a pending IPI from 1st kernel. Kernel panic occurs because IPI
comes before call_single_queue is initialized.

To fix the crash, rename init_call_single_data() to call_function_init()
and call it in start_kernel() so that call_single_queue can be
initialized before enabling interrupts.

The details of the crash are:

 (1) 2nd kernel boots up

 (2) A pending IPI from 1st kernel comes when irqs are first enabled
     in start_kernel().

 (3) Kernel tries to handle the interrupt, but call_single_queue
     is not initialized yet at this point. As a result, in the
     generic_smp_call_function_single_interrupt(), NULL pointer
     dereference occurs when list_replace_init() tries to access
     &q->list.next.

Therefore this patch changes the name of init_call_single_data()
to call_function_init() and calls it before local_irq_enable()
in start_kernel().
Signed-off-by: NTakao Indoh <indou.takao@jp.fujitsu.com>
Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Milton Miller <miltonm@bga.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: kexec@lists.infradead.org
Link: http://lkml.kernel.org/r/D6CBEE2F420741indou.takao@jp.fujitsu.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Thomas Gleixner reports that we now have a boot crash triggered by
CONFIG_CPUMASK_OFFSTACK=y:

    BUG: unable to handle kernel NULL pointer dereference at   (null)
    IP: [<c11ae035>] find_next_bit+0x55/0xb0
    Call Trace:
     [<c11addda>] cpumask_any_but+0x2a/0x70
     [<c102396b>] flush_tlb_mm+0x2b/0x80
     [<c1022705>] pud_populate+0x35/0x50
     [<c10227ba>] pgd_alloc+0x9a/0xf0
     [<c103a3fc>] mm_init+0xec/0x120
     [<c103a7a3>] mm_alloc+0x53/0xd0

which was introduced by commit de03c72c ("mm: convert
mm->cpu_vm_cpumask into cpumask_var_t"), and is due to wrong ordering of
mm_init() vs mm_init_cpumask

Thomas wrote a patch to just fix the ordering of initialization, but I
hate the new double allocation in the fork path, so I ended up instead
doing some more radical surgery to clean it all up.
Reported-by: NThomas Gleixner <tglx@linutronix.de>
Reported-by: NIngo Molnar <mingo@elte.hu>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On larger systems, because of the numerous ACPI, Bootmem and EFI messages,
the static log buffer overflows before the larger one specified by the
log_buf_len param is allocated.  Minimize the overflow by allocating the
new log buffer as soon as possible.

On kernels without memblock, a later call to setup_log_buf from
kernel/init.c is the fallback.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix CONFIG_PRINTK=n build]
Signed-off-by: NMike Travis <travis@sgi.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cpumask_t is very big struct and cpu_vm_mask is placed wrong position.
It might lead to reduce cache hit ratio.

This patch has two change.
1) Move the place of cpumask into last of mm_struct. Because usually cpumask
   is accessed only front bits when the system has cpu-hotplug capability
2) Convert cpu_vm_mask into cpumask_var_t. It may help to reduce memory
   footprint if cpumask_size() will use nr_cpumask_bits properly in future.

In addition, this patch change the name of cpu_vm_mask with cpu_vm_mask_var.
It may help to detect out of tree cpu_vm_mask users.

This patch has no functional change.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kmemleak frees objects via RCU and when CONFIG_DEBUG_OBJECTS_RCU_HEAD
is enabled, the RCU callback triggers a call to free_object() in
lib/debugobjects.c. Since kmemleak is initialised before debug objects
initialisation, it may result in a kernel panic during booting. This
patch moves the kmemleak_init() call after debug_objects_mem_init().
Reported-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: <stable@kernel.org>

This patchset is a cleanup and a preparation to unshare the pid namespace.
These prerequisites prepare for Eric's patchset to give a file descriptor
to a namespace and join an existing namespace.

This patch:

It turns out that the existing assignment in copy_process of the
child_reaper can handle the initial assignment of child_reaper we just
need to generalize the test in kernel/fork.c
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@free.fr>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: NSerge E. Hallyn <serge@hallyn.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move setup_nr_cpu_ids(), smp_init() and some other SMP boot parameter
setup functions from init/main.c to kenrel/smp.c, saves some #ifdef
CONFIG_SMP.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: Rakib Mullick <rakib.mullick@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During early boot, local IRQ is disabled until IRQ subsystem is
properly initialized.  During this time, no one should enable
local IRQ and some operations which usually are not allowed with
IRQ disabled, e.g. operations which might sleep or require
communications with other processors, are allowed.

lockdep tracked this with early_boot_irqs_off/on() callbacks.
As other subsystems need this information too, move it to
init/main.c and make it generally available.  While at it,
toggle the boolean to early_boot_irqs_disabled instead of
enabled so that it can be initialized with %false and %true
indicates the exceptional condition.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110120110635.GB6036@htj.dyndns.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The call to flush_scheduled_work() in do_initcalls() is there to make
sure all works queued to system_wq by initcalls finish before the init
sections are dropped.

However, the call doesn't make much sense at this point - there
already are multiple different workqueues and different subsystems are
free to create and use their own.  Ordering requirements are and
should be expressed explicitly.

Drop the call to prepare for the deprecation and removal of
flush_scheduled_work().

Andrew suggested adding sanity check where the workqueue code checks
whether any pending or running work has the work function in the init
text section.  However, checking this for running works requires the
worker to keep track of the current function being executed, and
checking only the pending works will miss most cases.  As a violation
will almost always be caught by the usual page fault mechanism, I
don't think it would be worthwhile to make the workqueue code track
extra state just for this.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>

perf_event_init() wants to start using IDR trees, its needs in turn
are satisfied by mm_init().
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222056.206992649@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently we call perf_event_init() from sched_init(). In order to
make it more obvious move it to the cannnonical location.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222056.093629821@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The perf hardware pmu got initialized at various points in the boot,
some before early_initcall() some after (notably arch_initcall).

The problem is that the NMI lockup detector is ran from early_initcall()
and expects the hardware pmu to be present.

Sanitize this by moving all architecture hardware pmu implementations to
initialize at early_initcall() and move the lockup detector to an explicit
initcall right after that.

Cc: paulus <paulus@samba.org>
Cc: davem <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290707759.2145.119.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

According to commit 5e3d20a6
(init: Remove the BKL from startup code) these sparse notations
should be removed also.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

early_init_irq_lock_class() is called way before anything touches the
irq descriptors. In case of SPARSE_IRQ=y this is a NOP operation
because the radix tree is empty at this point. For the SPARSE_IRQ=n
case it's sufficient to set the lock class in early_init_irq(). 
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NIngo Molnar <mingo@elte.hu>

Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since this section can be read-only (they're in .rodata), they should
always have been const.  Minor flow-through various functions.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Tested-by: NPhil Carmody <ext-phil.2.carmody@nokia.com>

Andrew Morton suggested that the do_one_initcall and do_one_initcall_debug
functions can be marked __init_or_module such that they can be discarded
for the CONFIG_MODULES=N case.
Signed-off-by: NKevin Winchester <kjwinchester@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using:

	gcc (GCC) 4.5.0 20100610 (prerelease)

The following warning appears:

	init/main.c: In function `do_one_initcall':
	init/main.c:730:10: warning: `calltime.tv64' may be used uninitialized in this function

This warning is actually correct, as the global initcall_debug could
arguably be changed by the initcall.

Correct this warning by extracting a new function, do_one_initcall_debug,
that performs the initcall for the debug case.
Signed-off-by: NKevin Winchester <kjwinchester@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mark init_workqueues() as early_initcall() and thus it will be initialized
before smp bringup. init_workqueues() registers for the hotcpu notifier
and thus it should cope with the processors that are brought online after
the workqueues are initialized.

x86 smp bringup code uses workqueues and uses a workaround for the
cold boot process (as the workqueues are initialized post smp_init()).
Marking init_workqueues() as early_initcall() will pave the way for
cleaning up this code.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>

I have shown by code review that no driver takes
the BKL at init time any more, so whatever the
init code was locking against is no longer there
and it is now safe to remove the BKL there.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NSteven Rostedt <rostedt@goodmis>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Apparently "pid-1" confuses people...
Requested-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: torvalds@linux-foundation.org
Cc: randy.dunlap@oracle.com
Cc: Ilya Loginov <isloginov@gmail.com>
LKML-Reference: <1277887031.1868.82.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Ilya reported that on a very slow machine he could reliably
reproduce a race between forking init and kthreadd. We first
fork init so that it  obtains pid-1, however since the scheduler
is already fully running at this point it can preempt and run
the init thread before we spawn and set kthreadd_task.

The init thread can then attempt spawning kthreads without
kthreadd being present which results in an OOPS.
Reported-by: NIlya Loginov <isloginov@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1277736661.3561.110.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch updates percpu allocator such that it can serve limited
amount of allocation before slab comes online.  This is primarily to
allow slab to depend on working percpu allocator.

Two parameters, PERCPU_DYNAMIC_EARLY_SIZE and SLOTS, determine how
much memory space and allocation map slots are reserved.  If this
reserved area is exhausted, WARN_ON_ONCE() will trigger and allocation
will fail till slab comes online.

The following changes are made to implement early alloc.

* pcpu_mem_alloc() now checks slab_is_available()

* Chunks are allocated using pcpu_mem_alloc()

* Init paths make sure ai->dyn_size is at least as large as
  PERCPU_DYNAMIC_EARLY_SIZE.

* Initial alloc maps are allocated in __initdata and copied to
  kmalloc'd areas once slab is online.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>

Patch is against latest Linus master branch and is expected to be
safe bug fix.

You get:
ACPI: HARDWARE addr space,NOT supported yet
for each ACPI defined CPU which status is active, but exceeds
maxcpus= count.

As these "not booted" CPUs do not run an idle routine
and echo X >/proc/acpi/processor/*/throttling did not work
I couldn't find a way to really access not onlined/booted
machines. Still this should get fixed and
/proc/acpi/processor/X dirs of cores exceeding maxcpus
should not show up.

I wonder whether this could get cleaned up by truncating possible cpu mask
and nr_cpu_ids to setup_max_cpus early some day
(and not exporting setup_max_cpus anymore then).
But this needs touching of a lot other places...
Signed-off-by: NThomas Renninger <trenn@suse.de>
CC: travis@sgi.com
CC: linux-acpi@vger.kernel.org
CC: lenb@kernel.org
Signed-off-by: NLen Brown <len.brown@intel.com>

We have been resisting new ftrace plugins and removing existing
ones, and kmemtrace has been superseded by kmem trace events
and perf-kmem, so we remove it.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
[ remove kmemtrace from the makefile, handle slob too ]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The boot tracer is useless. It simply logs the initcalls
but in fact these initcalls are also logged through printk
while using the initcall_debug kernel parameter.

Nobody seem to be using it so far. Then just remove it.
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com>
[ remove the hooks in main.c, and the headers ]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

For each new populated zone of hotadded node, need to update its pagesets
with dynamically allocated per_cpu_pageset struct for all possible CPUs:

    1) Detach zone->pageset from the shared boot_pageset
       at end of __build_all_zonelists().

    2) Use mutex to protect zone->pageset when it's still
       shared in onlined_pages()

Otherwises, multiple zones of different nodes would share same boot strapping
boot_pageset for same CPU, which will finally cause below kernel panic:

  ------------[ cut here ]------------
  kernel BUG at mm/page_alloc.c:1239!
  invalid opcode: 0000 [#1] SMP
  ...
  Call Trace:
   [<ffffffff811300c1>] __alloc_pages_nodemask+0x131/0x7b0
   [<ffffffff81162e67>] alloc_pages_current+0x87/0xd0
   [<ffffffff81128407>] __page_cache_alloc+0x67/0x70
   [<ffffffff811325f0>] __do_page_cache_readahead+0x120/0x260
   [<ffffffff81132751>] ra_submit+0x21/0x30
   [<ffffffff811329c6>] ondemand_readahead+0x166/0x2c0
   [<ffffffff81132ba0>] page_cache_async_readahead+0x80/0xa0
   [<ffffffff8112a0e4>] generic_file_aio_read+0x364/0x670
   [<ffffffff81266cfa>] nfs_file_read+0xca/0x130
   [<ffffffff8117b20a>] do_sync_read+0xfa/0x140
   [<ffffffff8117bf75>] vfs_read+0xb5/0x1a0
   [<ffffffff8117c151>] sys_read+0x51/0x80
   [<ffffffff8103c032>] system_call_fastpath+0x16/0x1b
  RIP  [<ffffffff8112ff13>] get_page_from_freelist+0x883/0x900
   RSP <ffff88000d1e78a8>
  ---[ end trace 4bda28328b9990db ]

[akpm@linux-foundation.org: merge fix]
Signed-off-by: NHaicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Reviewed-by: NAndi Kleen <andi.kleen@intel.com>
Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel debugger can operate well before mm_init(), but the x86
hardware breakpoint code which uses the perf api requires that the
kernel allocators are initialized.

This means the kernel debug core needs to provide an optional arch
specific call back to allow the initialization functions to run after
the kernel has been further initialized.

The kdb shell already had a similar restriction with an early
initialization and late initialization.  The kdb_init() was moved into
the debug core's version of the late init which is called
dbg_late_init();

CC: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

This patch contains the hooks and instrumentation into kernel which
live outside the kernel/debug directory, which the kdb core
will call to run commands like lsmod, dmesg, bt etc...

CC: linux-arch@vger.kernel.org
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NMartin Hicks <mort@sgi.com>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

cpuset_mem_spread_node() returns an offline node, and causes an oops.

This patch fixes it by initializing task->mems_allowed to
node_states[N_HIGH_MEMORY], and updating task->mems_allowed when doing
memory hotplug.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Reported-by: NNick Piggin <npiggin@suse.de>
Tested-by: NNick Piggin <npiggin@suse.de>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The only in tree external users of the symbol setup_max_cpus are in
arch/x86/.  The files ./kernel/alternative.c, ./kernel/visws_quirks.c, and
./mm/kmemcheck/kmemcheck.c are all guarded by CONFIG_SMP being defined.
For this case the symbol is an unsigned int and declared as an extern in
include/linux/smp.h.

When CONFIG_SMP is not defined the symbol setup_max_cpus is
a constant value that is only used in init/main.c.  Make the symbol
static for this case.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- new Documentation/init.txt file describing various forms of failure
  trying to load the init binary after kernel bootup

- extend the init/main.c init failure message to direct to
  Documentation/init.txt
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are quite a few GFP_KERNEL memory allocations made during
suspend/hibernation and resume that may cause the system to hang, because
the I/O operations they depend on cannot be completed due to the
underlying devices being suspended.

Avoid this problem by clearing the __GFP_IO and __GFP_FS bits in
gfp_allowed_mask before suspend/hibernation and restoring the original
values of these bits in gfp_allowed_mask durig the subsequent resume.

[akpm@linux-foundation.org: fix CONFIG_PM=n linkage]
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reported-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To avoid potential problems with an empty /dev open /dev/console
from rootfs instead of waiting to mount our root filesystem and
mounting it there.   This effectively guarantees that there will
be a device node, and it won't be on a filesystem that we will
ever unmount, so there are no issues with leaving /dev/console
open and pinning the filesystem.

This is actually more effective than automatically mounting
devtmpfs on /dev because it removes removes the occasionally
problematic assumption that /dev/console exists from the boot
code.

With this patch I was able to throw busybox on my /boot partition
(which has no /dev directory) and boot into userspace without
problems.

The only possible negative consequence I can think of is that
someone out there deliberately used did not use a character device
that is major 5 minor 2 for /dev/console.  Does anyone know of a
situation in which that could make sense?
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>