Add support in rc-core for drivers which implement the wakeup scancode
filter by encoding the scancode using the raw IR encoders. This is by
way of rc_dev::encode_wakeup which should be set to true and
rc_dev::allowed_wakeup_protocols should be set to the raw IR encoders.

We also do not permit the mask to be set as we cannot generate IR
which would match that.
Signed-off-by: NJames Hogan <james@albanarts.com>
Signed-off-by: NAntti Seppälä <a.seppala@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

We need to valdiate that scancodes are valid for their protocol; an
incorrect necx scancode could actually be a nec scancode, for example.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

For IR wakeup, a driver has to program the hardware to wakeup at a
specific IR sequence, so it makes no sense to allow multiple wakeup
protocols to be selected. In the same manner the sysfs interface only
allows one scancode to be provided.

In addition, we need to know the specific variant of the protocol.

In short, these changes are made to the wakeup_protocols sysfs entry:
 - list all the protocol variants rather than the protocol groups,
   e.g. "nec nec-x nec-32" rather than just "nec".
 - only allow one protocol variant to be selected rather than multiple
 - wakeup_filter can only be set once a protocol has been selected in
   wakeup_protocols.

This is an API change, however the only user of this API is the img-ir,
but the wakeup code was never merged to mainline, so it was never used.
Signed-off-by: NSean Young <sean@mess.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Sifan Naeem <sifan.naeem@imgtec.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are many variants of extended rc5. This implements the 20 bit
version.
Signed-off-by: NSean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

rc_unregister_device() will first call ir_free_table(), and later
device_del(); however, the latter causes a call to rc_dev_uevent(),
which prints rc_map.name, which at this point has already bee freed.

This fixes a use-after-free bug found with KASAN.

As reported by Shuah:

 "I am seeing the following when I do rmmod on au0828

  BUG: KASAN: use-after-free in string+0x170/0x1f0 at addr ffff8801bd513000
  Read of size 1 by task rmmod/1831
  CPU: 1 PID: 1831 Comm: rmmod Tainted: G        W       4.9.0-rc5 #5
  Hardware name: Hewlett-Packard HP ProBook 6475b/180F, BIOS 68TTU Ver. F.04 08/03/2012
  ffff8801aea2f680 ffffffff81b37ad3 ffff8801fa403b80 ffff8801bd513000
  ffff8801aea2f6a8 ffffffff8156c301 ffff8801aea2f738 ffff8801bd513000
  ffff8801fa403b80 ffff8801aea2f728 ffffffff8156c59a ffff8801aea2f770
  Call Trace:
  dump_stack+0x67/0x94
  [<ffffffff8156c301>] kasan_object_err+0x21/0x70
  [<ffffffff8156c59a>] kasan_report_error+0x1fa/0x4d0
  [<ffffffffa116f05f>] ? au0828_exit+0x10/0x21 [au0828]
  [<ffffffff8156c8b3>] __asan_report_load1_noabort+0x43/0x50
  [<ffffffff81b58b20>] ? string+0x170/0x1f0
  [<ffffffff81b58b20>] string+0x170/0x1f0
  [<ffffffff81b621c4>] vsnprintf+0x374/0x1c50
  [<ffffffff81b61e50>] ? pointer+0xa80/0xa80
  [<ffffffff8156b676>] ? save_stack+0x46/0xd0
  [<ffffffff81566faa>] ? __kmalloc+0x14a/0x2a0
  [<ffffffff81b3d70a>] ? kobject_get_path+0x9a/0x200
  [<ffffffff81b408c2>] ? kobject_uevent_env+0x282/0xca0
  [<ffffffff81b412eb>] ? kobject_uevent+0xb/0x10
  [<ffffffff81f10104>] ? device_del+0x434/0x6d0
  [<ffffffffa0fea717>] ? rc_unregister_device+0x177/0x240 [rc_core]
  [<ffffffffa116eeb0>] ? au0828_rc_unregister+0x60/0xb0 [au0828]

 The problem is fixed with this patch on Linux 4.9-rc4"
Signed-off-by: NMax Kellermann <max.kellermann@gmail.com>
Tested-by: NShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of calling printk() directly, use pr_foo() macro.

That should make the rc_core messages be formatted with the
right prefix.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Introduce managed versions of both functions.
They allows to simplify the error path in the probe function of
rc drivers, and usually also to simplify the remove function.

New element managed_alloc in struct rc_dev is needed to correctly
handle mixed use, e.g. managed version of rc_register_device and
normal version of rc_allocate_device.

In addition devm_rc_allocate_device sets rc->dev.parent as having a
reference to the parent device might be useful for future extensions.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.

As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.

So, join those continuation lines.

The patch was generated via the script below, and manually
adjusted if needed.

</script>
use Text::Tabs;
while (<>) {
	if ($next ne "") {
		$c=$_;
		if ($c =~ /^\s+\"(.*)/) {
			$c2=$1;
			$next =~ s/\"\n$//;
			$n = expand($next);
			$funpos = index($n, '(');
			$pos = index($c2, '",');
			if ($funpos && $pos > 0) {
				$s1 = substr $c2, 0, $pos + 2;
				$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
				$s2 =~ s/^\s+//;

				$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");

				print unexpand("$next$s1\n");
				print unexpand("$s2\n") if ($s2 ne "");
			} else {
				print "$next$c2\n";
			}
			$next="";
			next;
		} else {
			print $next;
		}
		$next="";
	} else {
		if (m/\"$/) {
			if (!m/\\n\"$/) {
				$next=$_;
				next;
			}
		}
	}
	print $_;
}
</script>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Currently we do not know what variant (bit length) of the nec protocol
is used, other than from guessing from the length of the scancode. Now
nec will be handled the same way as the sony protocol or the rc6 protocol;
one variant per bit length.

In the future we might want to expose the rc protocol type to userspace
and we don't want to be introducing this world of pain into userspace
too.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This partly reverts commit 078600f5.

Due to the relocation of input_register_device() call, holding down a
button on an IR remote no longer resulted in repeated key down events.
Signed-off-by: NOle Ernst <olebowle@gmx.com>
Tested-by: NMatthias Reichl <hias@horus.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When the rc_map table is created the char pointer of the name of the keymap
is copied to the rc_map->name field. However, this pointer points to memory
from the keymap module itself.

Since these keymap modules are not refcounted, that means anyone can call
rmmod to unload that module. Which is not a big deal because the contents of
the map is all copied to rc_map, except for the keymap name.

So after a keymap module is unloaded the name pointer has become stale. Unloading
the rc-core module will now cause a kernel oops in rc_dev_uevent().

The solution is to kstrdup the name so there are no more references to the
keymap module remaining.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add handling of remote control events coming from the HDMI CEC bus
and the new protocol required for that.
Signed-off-by: NKamil Debski <kamil@wypas.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

CONFIG_DEBUG_KOBJECT_RELEASE found this bug.
Signed-off-by: NMax Kellermann <max@duempel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Access to dev->initialized is atomic and dev->initialized isn't
accessed in any other code protected by this mutex.
Therefore we don't need to get the mutex here.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The device initialization completes only after calling
input_register_device(). However, rc_open() can be called while
the device is being registered by the input/evdev core. So, we
can't expect that rc_dev->initialized to be true.

Change the logic to don't require initialized == true at rc_open
and change the type of initialized to be atomic.

this way, we can check for it earlier where it is really needed,
without needing to lock the mutex just for testing it.

Tested with nuvoton_cir driver on a NUC5i7RYB with CIR integrated on it.
Reported-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The mutex lock at rc_register_device() was added by commit 08aeb7c9
("[media] rc: add locking to fix register/show race").

It is meant to avoid race issues when trying to open a sysfs file while
the RC register didn't complete.

Adding a lock there causes troubles, as detected by the Kernel lock
debug instrumentation at the Kernel:

    ======================================================
    [ INFO: possible circular locking dependency detected ]
    4.5.0-rc3+ #46 Not tainted
    -------------------------------------------------------
    systemd-udevd/2681 is trying to acquire lock:
     (s_active#171){++++.+}, at: [<ffffffff8171a115>] kernfs_remove_by_name_ns+0x45/0xa0

    but task is already holding lock:
     (&dev->lock){+.+.+.}, at: [<ffffffffa0724def>] rc_register_device+0xb2f/0x1450 [rc_core]

    which lock already depends on the new lock.

    the existing dependency chain (in reverse order) is:

    -> #1 (&dev->lock){+.+.+.}:
           [<ffffffff8124817d>] lock_acquire+0x13d/0x320
           [<ffffffff822de966>] mutex_lock_nested+0xb6/0x860
           [<ffffffffa0721f2b>] show_protocols+0x3b/0x3f0 [rc_core]
           [<ffffffff81cdaba5>] dev_attr_show+0x45/0xc0
           [<ffffffff8171f1b3>] sysfs_kf_seq_show+0x203/0x3c0
           [<ffffffff8171a6a1>] kernfs_seq_show+0x121/0x1b0
           [<ffffffff81617c71>] seq_read+0x2f1/0x1160
           [<ffffffff8171c911>] kernfs_fop_read+0x321/0x460
           [<ffffffff815abc20>] __vfs_read+0xe0/0x3d0
           [<ffffffff815ae90e>] vfs_read+0xde/0x2d0
           [<ffffffff815b1d01>] SyS_read+0x111/0x230
           [<ffffffff822e8636>] entry_SYSCALL_64_fastpath+0x16/0x76

    -> #0 (s_active#171){++++.+}:
           [<ffffffff81244f24>] __lock_acquire+0x4304/0x5990
           [<ffffffff8124817d>] lock_acquire+0x13d/0x320
           [<ffffffff81717d3a>] __kernfs_remove+0x58a/0x810
           [<ffffffff8171a115>] kernfs_remove_by_name_ns+0x45/0xa0
           [<ffffffff81721592>] remove_files.isra.0+0x72/0x190
           [<ffffffff8172174b>] sysfs_remove_group+0x9b/0x150
           [<ffffffff81721854>] sysfs_remove_groups+0x54/0xa0
           [<ffffffff81cd97d0>] device_remove_attrs+0xb0/0x140
           [<ffffffff81cdb27c>] device_del+0x38c/0x6b0
           [<ffffffffa0724b8b>] rc_register_device+0x8cb/0x1450 [rc_core]
           [<ffffffffa1326a7b>] dvb_usb_remote_init+0x66b/0x14d0 [dvb_usb]
           [<ffffffffa1321c81>] dvb_usb_device_init+0xf21/0x1860 [dvb_usb]
           [<ffffffffa13517dc>] dib0700_probe+0x14c/0x410 [dvb_usb_dib0700]
           [<ffffffff81dbb1dd>] usb_probe_interface+0x45d/0x940
           [<ffffffff81ce7e7a>] driver_probe_device+0x21a/0xc30
           [<ffffffff81ce89b1>] __driver_attach+0x121/0x160
           [<ffffffff81ce21bf>] bus_for_each_dev+0x11f/0x1a0
           [<ffffffff81ce6cdd>] driver_attach+0x3d/0x50
           [<ffffffff81ce5df9>] bus_add_driver+0x4c9/0x770
           [<ffffffff81cea39c>] driver_register+0x18c/0x3b0
           [<ffffffff81db6e98>] usb_register_driver+0x1f8/0x440
           [<ffffffffa074001e>] dib0700_driver_init+0x1e/0x1000 [dvb_usb_dib0700]
           [<ffffffff810021b1>] do_one_initcall+0x141/0x300
           [<ffffffff8144d8eb>] do_init_module+0x1d0/0x5ad
           [<ffffffff812f27b6>] load_module+0x6666/0x9ba0
           [<ffffffff812f5fe8>] SyS_finit_module+0x108/0x130
           [<ffffffff822e8636>] entry_SYSCALL_64_fastpath+0x16/0x76

    other info that might help us debug this:

     Possible unsafe locking scenario:

           CPU0                    CPU1
           ----                    ----
      lock(&dev->lock);
                                   lock(s_active#171);
                                   lock(&dev->lock);
      lock(s_active#171);

     *** DEADLOCK ***

    3 locks held by systemd-udevd/2681:
     #0:  (&dev->mutex){......}, at: [<ffffffff81ce8933>] __driver_attach+0xa3/0x160
     #1:  (&dev->mutex){......}, at: [<ffffffff81ce8941>] __driver_attach+0xb1/0x160
     #2:  (&dev->lock){+.+.+.}, at: [<ffffffffa0724def>] rc_register_device+0xb2f/0x1450 [rc_core]

In this specific case, some error happened during device init,
causing IR to be disabled.

Let's fix it by adding a var that will tell when the device is
initialized. Any calls before that will return a -EINVAL.

That should prevent the race issues.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Now that that the decoder modules are loaded on-demand we can move
loading the lirc module to rc_register_device directly and remove
unneeded functions and comments.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>

Declare struct proto_names and its member name as const.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Prepare on-demand decoder module loading by adding a module_name member
to struct proto_names and introducing the related load function.

After this patch of the series the decoder modules are still loaded
unconditionally.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Simplify the logging.

I had some doubts about using the elvis operator as it's GNU extension.
However GNU extensions are explicitely allowed and this operator is
used at several places in the kernel code.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

rc-main mistakenly uses #ifdef MODULE to determine whether it should
load the rc keymap modules.  This symbol is only defined if rc-main
is being built as a module itself, and bears no relation to whether
the rc keymaps are modules.

Fix this to use CONFIG_MODULES instead.

Fixes: 631493ec ("[media] rc-core: merge rc-map.c into rc-main.c")
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This reverts commit 0d830b2d.

The current code is not mature enough, the API should allow a single
protocol to be specified. Also, the current code contains heuristics
that will depend on module load order.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Acked-by: NAntti Seppälä <a.seppala@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Commit 275ddb40 removed the lirc
"protocol" but kept backwards compatibility by always listing
the protocol as present and enabled. This patch further improves
the logic by only listing the protocol if the lirc module is loaded
(or if lirc is builtin).
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The LIRC protocol was always a bad fit and if we're ever going to expose
protocol numbers in a user-space API, it'd be better to get rid of the
LIRC "protocol" first.

The sysfs API is kept backwards compatible by always listing the lirc
protocol as present and enabled.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch changes rc-core to use the kernel facilities that are already
available for handling unique numbers instead of rolling its own bitmap
stuff.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Tested-by: NStefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The input_dev is already gone when the rc device is being unregistered
so checking for its presence only means that no remove uevent will be
generated.

Cc: stable@kernel.org
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add support in rc-core for drivers which implement the wakeup scancode
filter by encoding the scancode using the raw IR encoders. This is by
way of rc_dev::encode_wakeup which should be set to true to make the
allowed wakeup protocols the same as the set of raw IR encoders.

As well as updating the sysfs interface to know which wakeup protocols
are allowed for encode_wakeup drivers, also ensure that the IR
decoders/encoders are loaded when an encode_wakeup driver is registered.
Signed-off-by: NJames Hogan <james@albanarts.com>
Signed-off-by: NAntti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/rc/rc-main.c:749 rc_close() warn: inconsistent indenting

There's an extra space there.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Since commit da6e162d ("[media] rc-core: simplify sysfs code"), when
the IR protocol is set using the sysfs interface to the same set of
protocols that are already set, store_protocols() does not refresh the
scancode filter with the new protocol, even if it has already called the
change_protocol() callback successfully. This results in the filter
being disabled in the hardware and not re-enabled until the filter is
set again using sysfs.

Fix in store_protocols() by still re-applying the filter whenever the
change_protocol() driver callback succeeded.

The problem can be reproduced with the img-ir driver by setting a
filter, and then setting the protocol to the same protocol that is
already set:
$ echo nec > protocols
$ echo 0xffff > filter_mask
$ echo nec > protocols

After this, messages which don't match the filter were still being
received.

Fixes: da6e162d ("[media] rc-core: simplify sysfs code")
Reported-by: NSifan Naeem <sifan.naeem@imgtec.com>
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: David Härdeman <david@hardeman.nu>
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The functions input_free_device() and rc_close() test whether their argument
is NULL and then return immediately. Thus the test around the call
is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As reported by smatch:
	drivers/media/rc/rc-main.c:1426 rc_register_device() warn: should '1 << rc_map->rc_type' be a 64 bit type?
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

lockdep reports a potential circular dependecy deadlock when registering input device.

Unlock mutex rc_dev->lock prior to calling ir_raw_event_register to avoid the circular
dependency since that function also calls input_register_device and rc_open.

 ======================================================
 [ INFO: possible circular locking dependency detected ]
 3.17.0-rc7+ #24 Not tainted
 -------------------------------------------------------
 modprobe/647 is trying to acquire lock:
  (input_mutex){+.+.+.}, at: [<ffffffff812ed81c>] input_register_device+0x2ba/0x381

 but task is already holding lock:
  (ir_raw_handler_lock){+.+.+.}, at: [<ffffffff813186ed>] ir_raw_event_register+0x102/0x190

 which lock already depends on the new lock.

[cut text]

 other info that might help us debug this:

 Chain exists of:
   input_mutex --> &dev->lock --> ir_raw_handler_lock

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(ir_raw_handler_lock);
                                lock(&dev->lock);
                                lock(ir_raw_handler_lock);
   lock(input_mutex);

  *** DEADLOCK ***

 4 locks held by modprobe/647:
  #0:  (&dev->mutex){......}, at: [<ffffffff812d19f3>] device_lock+0xf/0x11
  #1:  (&dev->mutex){......}, at: [<ffffffff812d19f3>] device_lock+0xf/0x11
  #2:  (&dev->lock){+.+.+.}, at: [<ffffffff81317fff>] rc_register_device+0x55d/0x58a
  #3:  (ir_raw_handler_lock){+.+.+.}, at: [<ffffffff813186ed>] ir_raw_event_register+0x102/0x190

 stack backtrace:
 CPU: 0 PID: 647 Comm: modprobe Not tainted 3.17.0-rc7+ #24

 Call Trace:
  [<ffffffff81489d6a>] dump_stack+0x46/0x58
  [<ffffffff81487699>] print_circular_bug+0x1f8/0x209
  [<ffffffff81074353>] __lock_acquire+0xb54/0xeda
  [<ffffffff81080f17>] ? console_unlock+0x34d/0x399
  [<ffffffff81074c01>] lock_acquire+0xd9/0x111
  [<ffffffff812ed81c>] ? input_register_device+0x2ba/0x381
  [<ffffffff8148e650>] mutex_lock_interruptible_nested+0x57/0x381
  [<ffffffff812ed81c>] ? input_register_device+0x2ba/0x381
  [<ffffffff81124e03>] ? kfree+0x7c/0x96
  [<ffffffff812ed81c>] ? input_register_device+0x2ba/0x381
  [<ffffffff81072531>] ? trace_hardirqs_on+0xd/0xf
  [<ffffffff812ed81c>] input_register_device+0x2ba/0x381
  [<ffffffff8131a537>] ir_mce_kbd_register+0x109/0x139
  [<ffffffff81318728>] ir_raw_event_register+0x13d/0x190
  [<ffffffff81317e40>] rc_register_device+0x39e/0x58a
  [<ffffffff81072531>] ? trace_hardirqs_on+0xd/0xf
  [<ffffffffa00cf2e3>] nvt_probe+0x5ad/0xd52 [nuvoton_cir]
  [<ffffffffa00ced36>] ? nvt_resume+0x80/0x80 [nuvoton_cir]
  [<ffffffff81296003>] pnp_device_probe+0x8c/0xa9
  [<ffffffff812d1b94>] ? driver_sysfs_add+0x6e/0x93
  [<ffffffff812d203a>] driver_probe_device+0xa1/0x1e3
  [<ffffffff812d217c>] ? driver_probe_device+0x1e3/0x1e3
  [<ffffffff812d21ca>] __driver_attach+0x4e/0x6f
  [<ffffffff812d075b>] bus_for_each_dev+0x5a/0x8c
  [<ffffffff812d1b24>] driver_attach+0x19/0x1b
  [<ffffffff812d1879>] bus_add_driver+0xf1/0x1d6
  [<ffffffff812d2817>] driver_register+0x87/0xbe
  [<ffffffffa0120000>] ? 0xffffffffa0120000
  [<ffffffff81295da4>] pnp_register_driver+0x1c/0x1e
  [<ffffffffa0120010>] nvt_init+0x10/0x1000 [nuvoton_cir]
  [<ffffffff8100030e>] do_one_initcall+0xea/0x18c
  [<ffffffff8111497f>] ? __vunmap+0x9d/0xc7
  [<ffffffff810a3ca1>] load_module+0x1c21/0x1f2c
  [<ffffffff810a0bce>] ? show_initstate+0x44/0x44
  [<ffffffff810a404e>] SyS_init_module+0xa2/0xb1
  [<ffffffff81490ed2>] system_call_fastpath+0x16/0x1b
Signed-off-by: NTomas Melin <tomas.melin@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

IR receiver using nuvoton-cir and lirc required additional configuration
steps after upgrade from kernel 3.16 to 3.17-rcX. Bisected regression to
commit da6e162d ("[media] rc-core:
simplify sysfs code").

The regression comes from adding function change_protocol in ir-raw.c.
It changes behaviour so that only the protocol enabled by driver's
map_name will be active after registration. This breaks user space
behaviour, lirc does not get key press signals anymore.

Enable lirc protocol by default for ir raw decoders to restore original
behaviour.

Cc: stable@vger.kernel.org # for v3.17
Signed-off-by: NTomas Melin <tomas.melin@iki.fi>
Acked-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

On some hardware (au0828/au8522), the hardware is broken with
regards to the initial pulse detection. So, the driver needs to
produce a fake start pulse. That limits the acceptable protocols,
as it is not possible to produce a fake pulse that would cover
all supported protocols.

So, allow the driver to explicitly set the allowed protocols.

If the driver doesn't specify, keep the old behavior.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This protocol is found on Dreambox remotes

[m.chehab@samsung.com: CodingStyle fixes and conflict fix]
Signed-off-by: NMarcel Mol <marcel@mesa.nl>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

We already have dev->scancode_filter and dev->scancode_wakeup_filter
so rename dev->scanmask to dev->scancode_mask for consistency.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The basic API of rc-core used to be:

	dev = rc_allocate_device();
	dev->x = a;
	dev->y = b;
	dev->z = c;
	rc_register_device();

which is a pretty common pattern in the kernel, after the introduction of
protocol arrays the API looks something like:

	dev = rc_allocate_device();
	dev->x = a;
	rc_set_allowed_protocols(dev, RC_BIT_X);
	dev->z = c;
	rc_register_device();

There's no real need for the protocols to be an array, so change it
back to be consistent (and in preparation for the following patches).

[m.chehab@samsung.com: added missing changes at some files]
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Simplify and cleanup the sysfs code a bit.

[m.chehab@samsung.com: rebased and fixed a CodingStyle issue]
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Right now the protocol information is not preserved, rc-core gets handed a
scancode but has no idea which protocol it corresponds to.

This patch (which required reading through the source/keymap for all drivers,
not fun) makes the protocol information explicit which is important
documentation and makes it easier to e.g. support multiple protocols with one
decoder (think rc5 and rc-streamzap). The information isn't used yet so there
should be no functional changes.

[m.chehab@samsung.com: rebased, added cxusb and removed bad whitespacing]
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The generic scancode filtering has questionable value and makes it
impossible to determine from userspace if there is an actual
scancode hw filter present or not.

So revert the generic parts.

Based on a patch from James Hogan <james.hogan@imgtec.com>, but this
version also makes sure that only the valid sysfs files are created
in the first place.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Acked-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>