Add code that allows smb_send_rqst to send an array of pages after the
initial kvec array has been sent. For now, we simply kmap the page
array and send it using the standard smb_send_kvec function. Eventually,
we may want to convert this code to use kernel_sendpage under the hood
and avoid the kmap altogether for the page data.
Reviewed-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

We want to send SMBs as "atomically" as possible. Prior to sending any
data on the socket, cork it to make sure that no non-full frames go
out. Afterward, uncork it to make sure all of the data gets pushed out
to the wire.

Note that this more or less renders the socket=TCP_NODELAY mount option
obsolete. When TCP_CORK and TCP_NODELAY are used on the same socket,
TCP_NODELAY is essentially ignored.
Acked-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Again, just a change in the arguments and some function renaming here.
In later patches, we'll change this code to deal with page arrays.

In this patch, we add a new smb_send_rqst wrapper and have smb_sendv
call that. Then we move most of the existing smb_sendv code into a new
function -- smb_send_kvec. This seems a little redundant, but later
we'll flesh this out to deal with arrays of pages.
Reviewed-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

We need a way to represent a call to be sent on the wire that does not
require having all of the page data kmapped. Behold the smb_rqst struct.
This new struct represents an array of kvecs immediately followed by an
array of pages.

Convert the signing routines to use these structs under the hood and
turn the existing functions for this into wrappers around that. For now,
we're just changing these functions to take different args. Later, we'll
teach them how to deal with arrays of pages.
Reviewed-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Use hmac-sha256 and rather than hmac-md5 that is used for CIFS/SMB.

Signature field in SMB2 header is 16 bytes instead of 8 bytes.

Automatically enable signing by client when requested by the server
when signing ability is available to the client.
Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

While trying to debug a SMB signature related issue with Windows Servers
figured out it might be easier to debug if we print the error code from
cifs_verify_signature(). Also, fix indendation while at it.
Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

Split all requests to echos, oplocks and others - each group uses
its own credit slot. This is indicated by new flags

CIFS_ECHO_OP and CIFS_OBREAK_OP

that are not used now for CIFS. This change is required to support
SMB2 protocol because of different processing of these commands.
Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

"smb2" makes me think of the SMB2.x protocol, which isn't at all what
this function is for...
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

There's a comment here about how we don't want to modify this length,
but nothing in this function actually does.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

A user reported a crash in cifs_demultiplex_thread() caused by an
incorrectly set mid_q_entry->callback() function. It appears that the
callback assignment made in cifs_call_async() was not flushed back to
memory suggesting that a memory barrier was required here. Changing the
code to make sure that the mid_q_entry structure was completely
initialised before it was added to the pending queue fixes the problem.
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Acked-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Acked-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

For SMB2, this should be a no-op. Obviously if we wanted to do something
for the SMB2 case, we could also define an operation here for it.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>

to be protocol-unspecific and big enough to keep both CIFS
and SMB2 values.
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>

Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>

that lets us use this functions for SMB2.
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>

that is essential for CIFS/SMB/SMB2 oplock breaks and SMB2 echos.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

to let us kill the proccess if it hangs waiting for a credit when
the session is down and echo is disabled.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

and send no more than credits value requests at once. For SMB/CIFS
it's trivial: increment this value by receiving any message and
decrement by sending one.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

by making it as unsigned integer and surround access with req_lock
from server structure.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Some servers sets this value less than 50 that was hardcoded and
we lost the connection if when we exceed this limit. Fix this by
respecting this value - not sending more than the server allows.

Cc: stable@kernel.org
Reviewed-by: NJeff Layton <jlayton@samba.org>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <stevef@smf-gateway.(none)>

CIFS currently uses wait_event_killable to put tasks to sleep while
they await replies from the server. That function though does not
allow the freezer to run. In many cases, the network interface may
be going down anyway, in which case the reply will never come. The
client then ends up blocking the computer from suspending.

Fix this by adding a new wait_event_freezable variant --
wait_event_freezekillable. The idea is to combine the behavior of
wait_event_killable and wait_event_freezable -- put the task to
sleep and only allow it to be awoken by fatal signals, but also
allow the freezer to do its job.
Signed-off-by: NJeff Layton <jlayton@redhat.com>

In order to handle larger SMBs for readpages and other calls, we want
to be able to read into a preallocated set of buffers. Rather than
changing all of the existing code to preallocate buffers however, we
instead add a receive callback function to the MID.

cifsd will call this function once the mid_q_entry has been identified
in order to receive the rest of the SMB. If the mid can't be identified
or the receive pointer is unset, then the standard 3rd phase receive
function will be called.
Reviewed-and-Tested-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NJeff Layton <jlayton@redhat.com>

We have two versions of signature generating code. A vectorized and
non-vectorized version. Eliminate a large chunk of cut-and-paste
code by turning the non-vectorized version into a wrapper around the
vectorized one.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Christoph had requested that the stats related code (in
CONFIG_CIFS_STATS2) be moved into helpers to make code flow more
readable.   This patch should help.   For example the following
section from transport.c

                       spin_unlock(&GlobalMid_Lock);
                       atomic_inc(&ses->server->num_waiters);
                       wait_event(ses->server->request_q,
                                  atomic_read(&ses->server->inFlight)
                                    < cifs_max_pending);
                       atomic_dec(&ses->server->num_waiters);
                       spin_lock(&GlobalMid_Lock);

becomes simpler (with the patch below):
                       spin_unlock(&GlobalMid_Lock);
                       cifs_num_waiters_inc(server);
                       wait_event(server->request_q,
                                  atomic_read(&server->inFlight)
                                    < cifs_max_pending);
                       cifs_num_waiters_dec(server);
                       spin_lock(&GlobalMid_Lock);
Reviewed-by: NJeff Layton <jlayton@redhat.com>
CC: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NSteve French <sfrench@us.ibm.com>
Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru>

if we failed on getting mid entry in cifs_call_async.

Cc: stable@kernel.org
Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

secMode to sec_mode
and
cifsTconInfo to cifs_tcon
and
cifsSesInfo to cifs_ses
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Minor revision to the last version of this patch -- the only difference
is the fix to the cFYI statement in cifs_reconnect.

Holding the spinlock while we call this function means that it can't
sleep, which really limits what it can do. Taking it out from under
the spinlock also means less contention for this global lock.

Change the semantics such that the Global_MidLock is not held when
the callback is called. To do this requires that we take extra care
not to have sync_mid_result remove the mid from the list when the
mid is in a state where that has already happened. This prevents
list corruption when the mid is sitting on a private list for
reconnect or when cifsd is coming down.
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

The current code always ignores the max_pending limit. Have it instead
only optionally ignore the pending limit. For CIFSSMBEcho, we need to
ignore it to make sure they always can go out. For async reads, writes
and potentially other calls, we need to respect it.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

We'll need this for async writes, so convert the call to take a kvec
array. CIFSSMBEcho is changed to put a kvec on the stack and pass
in the SMB buffer using that.
Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Further consolidate the SendReceive code by moving the checks run over
the packet into a separate function that all the SendReceive variants
can call.

We can also eliminate the check for a receive_len that's too big or too
small. cifs_demultiplex_thread already checks that and disconnects the
socket if that occurs, while setting the midStatus to MALFORMED. It'll
never call this code if that's the case.

Finally do a little cleanup. Use "goto out" on errors so that the flow
of code in the normal case is more evident. Also switch the logErr
variable in map_smb_to_linux_error to a bool.
Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

This is the same patch as originally posted, just with some merge
conflicts fixed up...

Currently, the ByteCount is usually converted to host-endian on receive.
This is confusing however, as we need to keep two sets of routines for
accessing it, and keep track of when to use each routine. Munging
received packets like this also limits when the signature can be
calulated.

Simplify the code by keeping the received ByteCount in little-endian
format. This allows us to eliminate a set of routines for accessing it
and we can now drop the *_le suffixes from the accessor functions since
that's now implied.

While we're at it, switch all of the places that read the ByteCount
directly to use the get_bcc inline which should also clean up some
unaligned accesses.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

       There is one big endian field in the cifs protocol, the RFC1001
       length, which cifs code (unlike in the smb2 code) had been handling as
       u32 until the last possible moment, when it was converted to be32 (its
       native form) before sending on the wire.   To remove the last sparse
       endian warning, and to make this consistent with the smb2
       implementation  (which always treats the fields in their
       native size and endianness), convert all uses of smb_buf_length to
       be32.

       This version incorporates Christoph's comment about
       using be32_add_cpu, and fixes a typo in the second
       version of the patch.
Signed-off-by: NSteve French <sfrench@us.ibm.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Slight revision to this patch...use min_t() instead of conditional
assignment. Also, remove the FIXME comment and replace it with the
explanation that Steve gave earlier.

After receiving a packet, we currently check the header. If it's no
good, then we toss it out and continue the loop, leaving the caller
waiting on that response.

In cases where the packet has length inconsistencies, but the MID is
valid, this leads to unneeded delays. That's especially problematic now
that the client waits indefinitely for responses.

Instead, don't immediately discard the packet if checkSMB fails. Try to
find a matching mid_q_entry, mark it as having a malformed response and
issue the callback.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

cifs_sign_smb only generates a signature if the correct Flags2 bit is
set. Make sure that it gets set correctly if we're sending an async
call.

This patch fixes:

    https://bugzilla.kernel.org/show_bug.cgi?id=28142Reported-and-Tested-by: NJG <jg@cms.ac>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

If we kill the process while it's sending on a socket then the
kernel_sendmsg will return -EINTR. This is normal. No need to spam the
ring buffer with this info.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Use the new send_nt_cancel function to send an NT_CANCEL when the
process is delivered a fatal signal. This is a "best effort" enterprise
however, so don't bother to check the return code. There's nothing we
can reasonably do if it fails anyway.
Reviewed-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>