This patch adds a new driver for the beeper controlled via GPIO pin.
The driver does not depend on the architecture and is positioned as
a replacement for the specific drivers that are used for this function.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Two tablets in this series support both pen and touch. One (Intuos S)
only supports pen. This patch also updates the driver to process wireless
devices that do not support touch interface.
Tested-by: NJason Gerecke <killertofu@gmail.com>
Reviewed-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Old single touch Tablet PCs do not have touch_max set at
wacom_features. Since touch device at lease supports one
finger, assign touch_max to 1 when touch usage is defined
in its HID Descriptor and touch_max is not pre-defined.
Tested-by: NJason Gerecke <killertofu@gmail.com>
Signed-off-by: NPing Cheng <pingc@wacom.com>
Reviewed-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The width and height values reported by the Intuos Pro are not in
surface units as required by the MT protocol. A simple multiplier
of 100x corrects it.
Signed-off-by: NJason Gerecke <killertofu@gmail.com>
Acked-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Use managed irq resource to simplify the driver.
Signed-off-by: NSebastian Reichel <sre@debian.org>
Reviewed-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Use dev_err() to output errors instead of dev_dbg().
Signed-off-by: NSebastian Reichel <sre@debian.org>
Reviewed-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add device tree support for twl4030 power button driver.

Adding device tree support involved converting the
driver to module_platform_driver().
Signed-off-by: NSebastian Reichel <sre@debian.org>
Acked-by: NKumar Gala <galak@codeaurora.org>
Tested-by: NFlorian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This simplifies error handling path and allows us get rid of
tsc2007_remove().
Tested-by: NDenis Carikli <denis@eukrea.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The driver does not use poll_delay parameter, so let's remove it.
Tested-by: NDenis Carikli <denis@eukrea.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: NDenis Carikli <denis@eukrea.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The transaction task here is hp_sdc_tasklet() and it releases the lock.
The problem is if we aren't able to queue the transaction then we need
to release the lock ourselves.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Remove unnecessary work pending test before calling schedule_work().  It
has been tested in queue_work_on() already.
Signed-off-by: NXie XiuQi <xiexiuqi@huawei.com>
Reviewed-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds support for the built-in multitouch sensor in the Samsung
SUR40 touchscreen device, also known as Microsoft Surface 2.0 or Microsoft
Pixelsense. Support for raw video output from the sensor as well as the
accelerometer will be added in a later patch.
Signed-off-by: NFlorian Echtler <floe@butterbrot.org>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

There was a spelling mistake on TSC/ADC binding where "coordinate" was
spelled as "coordiante".

We can't simply fix the error due to DT being an ABI, the approach taken
was to first use correct spelling and if that fails, fall back to
miss-spelled version.

It's unfortunate that has creeped into the tree.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This patch fixes coccinelle error regarding usage of IS_ERR and
PTR_ERR instead of PTR_ERR_OR_ZERO.
Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add missing i2c_set_clientdata() in mma8450_probe(), otherwise
calling i2c_get_clientdata() in mma8450_remove() returns NULL.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add missing i2c_set_clientdata() in mpu3050_probe(), otherwise
calling i2c_get_clientdata() in mpu3050_remove() returns NULL.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

There is a bug in keypad_probe() where we do:

	kp->irq_press   = platform_get_irq_byname(pdev, "press");
	kp->irq_release = platform_get_irq_byname(pdev, "release");
	if (kp->irq_press < 0 || kp->irq_release < 0) {

The problem is that these irq variables are unsigned so the error
handling doesn't work.  I've changed them to signed values.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This adds a driver for touchscreens using the zforce infrared
technology from Neonode connected via i2c to the host system.

It supports multitouch with up to two fingers and tracking of the
contacts in hardware.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI, and increase build testing coverage with
COMPILE_TEST.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

dev->hint_events_per_packet is guaranteed to be >= packet_size.
so an extra max() call is not needed.
Signed-off-by: NKang Hu <hukangustc@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Moust (if not all) modern software, including X, uses /dev/eventX rather than
the legacy /dev/mouseX devices. It therefore makes sense for general-purpose
(distro) kernels to use MOUSEDV=m (or even n), so let's drop the EXPERT=y
requirement.
Signed-off-by: NTom Gundersen <teg@jklm.no>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

There is plenty of consumer hardware (e.g., mac books) that does not use AT
keyboards or PS/2 mice. It therefore makes sense for distro kernels to
build the related drivers as modules to avoid loading them on hardware that
does not need them. As such, these options should no longer be protected by
EXPERT.

Moreover, building these drivers as modules gets rid of the following ugly
error during boot:

[    2.337745] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.439537] i8042: No controller found
Signed-off-by: NTom Gundersen <teg@jklm.no>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This allows the module to be autoloaded in the common case.

In order to work on non-PnP systems the module should be compiled in or
loaded unconditionally at boot (c.f. modules-load.d(5)), as before.
Signed-off-by: NTom Gundersen <teg@jklm.no>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

evdev always tries to allocate the event buffer for clients using
kzalloc rather than vmalloc, presumably to avoid mapping overhead where
possible.  However, drivers like bcm5974, which claims support for
reporting 16 fingers simultaneously, can have an extraordinarily large
buffer.  The resultant contiguous order-4 allocation attempt fails due
to fragmentation, and the device is thus unusable until reboot.

Try kzalloc if we can to avoid the mapping overhead, but if that fails,
fall back to vzalloc.
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

If hardware (or firmware) detects palm on the surface of the device it does
not mean that the data packet is bad from the protocol standpoint. Instead
of reporting PSMOUSE_BAD_DATA in this case simply threat it as if nothing
touches the surface.

BugLink: http://bugs.launchpad.net/bugs/1229361Signed-off-by: NJoseph Salisbury <joseph.salisbury@canonical.com>
Tested-by: NKamal Mostafa <kamal@canonical.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Get rid of unnecessary (void *) casting in 'cypress_init' function.
Signed-off-by: NGeyslan G. Bem <geyslan@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds a PWM dependency to configure the INPUT_MAX8997_HAPTIC
and INPUT_PWM_BEEPER. Without this patch, build system can lead to build
failure. This was observed during randconfig testing, in which
INPUT_MAX8997_HAPTIC or INPUT_PWM_BEEPER was enabled w/o PWM being
enabled, leading to the following errors:

init/built-in.o
drivers/built-in.o: In function `max8997_haptic_disable':
:(.text+0x1073a0): undefined reference to `pwm_disable'
drivers/built-in.o: In function `max8997_haptic_remove':
:(.text+0x1073fc): undefined reference to `pwm_free'
drivers/built-in.o: In function `max8997_haptic_play_effect_work':
:(.text+0x1074f0): undefined reference to `pwm_config'
:(.text+0x1075b0): undefined reference to `pwm_enable'
drivers/built-in.o: In function `max8997_haptic_probe':
:(.text+0x1076f8): undefined reference to `pwm_request'
:(.text+0x1077e8): undefined reference to `pwm_free'
drivers/built-in.o: In function `pwm_beeper_resume':
:(.text+0x1081a4): undefined reference to `pwm_config'
make: *** [vmlinux] Error 1
Signed-off-by: NManjunath Goudar <csmanjuvijay@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Change the dev2's name from "PS/2 Mouse" to "ALPS PS/2 Device".
Signed-off-by: NYunkang Tang <yunkang.tang@cn.alps.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Some multi-interface devices support expresskeys on a separate interface,
such as Bamboo; some multi-interface devices do not support touch at all,
such as Pen only Intuos5. Make sure we report the right device names.
Tested-by: NJason Gerecke <killertofu@gmail.com>
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add the missing clk_disable_unprepare() before return
from nspire_keypad_open() in the error handling case.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

'of_match_ptr' is defined in linux/of.h. Include it explicitly.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

'of_match_ptr' is defined in linux/of.h. Include it explicitly.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

'of_match_ptr' is defined in linux/of.h. Include it explicitly.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

'of_match_ptr' is defined in linux/of.h. Include it explicitly.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

'of_match_ptr' is defined in linux/of.h. Include it explicitly.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

'of_match_ptr' is defined in linux/of.h. Include it explicitly.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>