- 07 3月, 2013 12 次提交
-
-
由 Lee Jones 提交于
Required to read out correct debug information from the AB chip. Signed-off-by: NLee Jones <lee.jones@linaro.org> Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Lee Jones 提交于
Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: NLee Jones <lee.jones@linaro.org> Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Lee Jones 提交于
Signed-off-by: NYang QU <yang.qu@stericsson.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Reviewed-by: NAlexandre BOURDIOL <alexandre.bourdiol@stericsson.com> Reviewed-by: NPhilippe LANGLAIS <philippe.langlais@stericsson.com> Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Lee Jones 提交于
This patch allows to dump the SIM registers from debugfs. It will temporary change the config to allow APE side to read the SIM registers. Note that this read can cause problem on modem side since the modem can't read these registers while the operation is ongoing. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Reviewed-by: NMarcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: NJonas ABERG <jonas.aberg@stericsson.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Lee Jones 提交于
Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: NAlexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: NMarcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: NPhilippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Lee Jones 提交于
Make it possible to dump all registers in ab8505 and ab9540. Signed-off-by: NLee Jones <lee.jones@linaro.org> Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Lee Jones 提交于
Signed-off-by: NAlexandre Torgue <alexandre.torgue@stericsson.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Reviewed-by: NMarcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com> Tested-by: NMaxime COQUELIN <maxime.coquelin@stericsson.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Jonas Aaberg 提交于
Add information regarding what ab interrupt that caused a wake-up from suspend in <debugfs>/ab8500/interrupts. Also print the name of the interrupts, not just the numbers. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Reviewed-by: NPer FORLIN <per.forlin@stericsson.com> Tested-by: NMattias WALLIN <mattias.wallin@stericsson.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Jonas Aaberg 提交于
Stop trying to read i2c registers if one fail. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Lee Jones 提交于
Dump function that stores all readable ABB registers to a memory areas where they can be accessed from dump file. Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mattias Wallin 提交于
This patch changes bank prints to use hex value. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Reviewed-by: NMarcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: NDaniel WILLERUD <daniel.willerud@stericsson.com> Tested-by: NJonas ABERG <jonas.aberg@stericsson.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Lee Jones 提交于
Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: NM'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: NLee Jones <lee.jones@linaro.org> Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com> Tested-by: NMichel JAOUEN <michel.jaouen@stericsson.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 14 2月, 2013 1 次提交
-
-
由 Linus Walleij 提交于
When compiling the AB8500 core driver in the latest MFD tree the following happens: CC drivers/mfd/ab8500-debugfs.o /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:3: error: 'AB8500_SYS_CTRL1_BLOCK' undeclared here (not in a function) /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:2: error: array index in initializer not of integer type /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:2: error: (near initialization for 'debug_ranges') (...) This is due to a missing include statement, so fix it up. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 04 2月, 2013 12 次提交
-
-
由 Philippe Langlais 提交于
The new format of ab8500_gpadc_get() accepts a device name as a parameter to specify which device to retrieve. This patch enforces the use of that new format. Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NPhilippe Langlais <philippe.langlais@linaro.org>
-
由 Ashok G 提交于
Simple pointer error fix to obtain the expected sizeof() result. Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NAshok G <ashok.g@stericsson.com> Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com>
-
由 Bengt Jonsson 提交于
This patch adds an entry in debugfs to check number of interrupts from the AB. Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NBengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: NRabin VINCENT <rabin.vincent@stericsson.com>
-
由 Linus Walleij 提交于
With the introduction of new AB* platforms, it's important to allow as much code reuse as possible. By allowing a system's number of IRQs to be dynamically passed, we can reuse almost all of the -debugfs driver. Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
-
由 Mian Yousaf Kaukab 提交于
Implement an API so that a user may dump all AB8500 registers via debugfs file access. Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NMian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: NLinus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: NJonas ABERG <jonas.aberg@stericsson.com>
-
由 Mian Yousaf Kaukab 提交于
Update the ab8500_registers_print() to reuse it from multiple places. Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NMian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Reviewed-by: NLinus WALLEIJ <linus.walleij@stericsson.com> Reviewed-by: NJonas ABERG <jonas.aberg@stericsson.com>
-
由 Philippe Langlais 提交于
In case of AB-V3, the eye diagram related issues are resolved. So, set the device charging current to 300mA when connected to standard host. Also, add the USB PHY tuning values to improve the USB eye diagram Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: <thirupathi.chippakurthy@stericsson.com>
-
由 John Beckett 提交于
Allow a user to take a glimpse into the inner workings of the AB8500 Analogue-to-Digital Converters, via debugfs. Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NJohn Beckett <john.beckett@stericsson.com> Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com>
-
由 carriere etienne 提交于
Add debugfs entry ab8500/hwreg to read/write bit-field in AB8500 registers. Check the debugfs entries usage from heading comments in ab8500-debugfs.c Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: Ncarriere etienne <etienne.carriere@stericsson.com> Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com>
-
由 Lee Jones 提交于
Partly for coding style reasons, but mostly because sparse warns on it. This patch is a completion of a previous patch by Mark Brown. Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Mattias Wallin 提交于
This patch adds a counter to the sysfs file dynamically created by debugfs. It also fixes an array index error. Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: NMattias NILSSON <mattias.i.nilsson@stericsson.com>
-
由 Lee Jones 提交于
Allow users to subscribe to and view IRQ events live from debugfs. Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
- 29 11月, 2012 3 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: NDavid Brown <davidb@codeaurora.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: NDavid Brown <davidb@codeaurora.org> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: NDavid Brown <davidb@codeaurora.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 09 7月, 2012 2 次提交
-
-
由 Lee Jones 提交于
Now the MFD API is Device Tree aware we can use it for platform registration again, even when booting with DT enabled. To aid in Device Node pointer allocation we provide each cell with the associative compatible string. Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Lee Jones 提交于
There is only one method used to communicate with the DB8500 PRCMU, via I2C. Now this can be assumed, there is no requirement to specify the protocol in the function name. This patch removes protocol specifics and uses a more generic naming convention. Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 20 5月, 2012 1 次提交
-
-
由 Lee Jones 提交于
Allow the ab8500-debugfs driver to be probed during DT start-up. Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 09 1月, 2012 1 次提交
-
-
由 Linus Walleij 提交于
This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. <linux/mfd/ab8500/gpio.h> get prefixed and are now e.g. <linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface remains in <linux/mfd/abx500.h>. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
With the pending module.h cleanup, these files will fail to compile, unless they explicitly call out the include of this file. [omap-usb-host addition courtesy of Anand Gadiyar <gadiyar@ti.com>] Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 01 8月, 2011 1 次提交
-
-
由 Peter Huewe 提交于
This patch replaces the code for getting an unsigned long from a userspace buffer by a simple call to kstroul_from_user. This makes it easier to read and less error prone. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 23 3月, 2011 1 次提交
-
-
由 Vasiliy Kulikov 提交于
Don't allow everybody to interact with hardware registers. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 14 1月, 2011 2 次提交
-
-
由 Mark Brown 提交于
Partly for coding style reasons, but mostly because sparse warns on it. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NMattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mattias Wallin 提交于
Replace spaces with proper tabs. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 29 10月, 2010 1 次提交
-
-
由 Mattias Wallin 提交于
This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-