- 20 1月, 2016 5 次提交
-
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Missing alignment for .data section. Sometime bootup failed. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Missing alignment for .data section. Sometime bootup failed. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
- 15 12月, 2015 2 次提交
-
-
由 Daniel Lezcano 提交于
For the sake of consistency, let rename all ctrl_out/in calls to the write/read calls so we have the same API consistent with the other architectures hence open the door for the increasing of the test compilation coverage. The unsigned long coercive cast is removed because all variables are set to the right type "void __iomem *". Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
由 Daniel Lezcano 提交于
The current Kconfig option is the H8300 arch option. In order to comply to the current rule, let's create a specific option for the timer8 and select it from the arch's Kconfig. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
- 12 11月, 2015 1 次提交
-
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
- 08 11月, 2015 5 次提交
-
-
由 Javier Martinez Canillas 提交于
The h8300 architecture Makefile sets the CROSS_COMPILE variable to "h8300-unknown-linux-" unconditionally but doing that prevents the variable to be used if a toolchain with a different binary name is installed in the machine. So only set CROSS_COMPILE to that default if the variable has not been set by the user before. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
-
由 Yoshinori Sato 提交于
"WU" constraint required memory address. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
- stack fix - configure base address Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
- 28 10月, 2015 1 次提交
-
-
由 Rob Herring 提交于
Enable building all dtb files when CONFIG_OF_ALL_DTBS is enabled. The dtbs are not really dependent on a platform being enabled or any other kernel config, so for testing coverage it is convenient to build all of the dtbs. This builds all dts files in the tree, not just targets listed. Signed-off-by: NRob Herring <robh@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp
-
- 07 10月, 2015 1 次提交
-
-
由 Chris Metcalf 提交于
arch/tile added word-at-a-time.h after the patch that added generic-y entries; the generic-y entry is now stale. arch/h8300 is newer than the generic-y patch for word-at-a-time.h, and needs a generic-y entry. arch/powerpc seems to have gotten a generic-y entry by mistake in the first patch; this change removes it. Signed-off-by: NChris Metcalf <cmetcalf@ezchip.com>
-
- 23 9月, 2015 1 次提交
-
-
由 Peter Zijlstra 提交于
This patch makes sure that atomic_{read,set}() are at least {READ,WRITE}_ONCE(). We already had the 'requirement' that atomic_read() should use ACCESS_ONCE(), and most archs had this, but a few were lacking. All are now converted to use READ_ONCE(). And, by a symmetry and general paranoia argument, upgrade atomic_set() to use WRITE_ONCE(). Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: james.hogan@imgtec.com Cc: linux-kernel@vger.kernel.org Cc: oleg@redhat.com Cc: will.deacon@arm.com Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 11 9月, 2015 6 次提交
-
-
由 Christoph Hellwig 提交于
Almost everyone implements dma_set_mask the same way, although some time that's hidden in ->set_dma_mask methods. This patch consolidates those into a common implementation that either calls ->set_dma_mask if present or otherwise uses the default implementation. Some architectures used to only call ->set_dma_mask after the initial checks, and those instance have been fixed to do the full work. h8300 implemented dma_set_mask bogusly as a no-ops and has been fixed. Unfortunately some architectures overload unrelated semantics like changing the dma_ops into it so we still need to allow for an architecture override for now. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Most architectures just call into ->dma_supported, but some also return 1 if the method is not present, or 0 if no dma ops are present (although that should never happeb). Consolidate this more broad version into common code. Also fix h8300 which inorrectly always returned 0, which would have been a problem if it's dma_set_mask implementation wasn't a similarly buggy noop. As a few architectures have much more elaborate implementations, we still allow for arch overrides. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Currently there are three valid implementations of dma_mapping_error: (1) call ->mapping_error (2) check for a hardcoded error code (3) always return 0 This patch provides a common implementation that calls ->mapping_error if present, then checks for DMA_ERROR_CODE if defined or otherwise returns 0. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Most architectures do not support non-coherent allocations and either define dma_{alloc,free}_noncoherent to their coherent versions or stub them out. Openrisc uses dma_{alloc,free}_attrs to implement them, and only Mips implements them directly. This patch moves the Openrisc version to common code, and handles the DMA_ATTR_NON_CONSISTENT case in the mips dma_map_ops instance. Note that actual non-coherent allocations require a dma_cache_sync implementation, so if non-coherent allocations didn't work on an architecture before this patch they still won't work after it. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Since 2009 we have a nice asm-generic header implementing lots of DMA API functions for architectures using struct dma_map_ops, but unfortunately it's still missing a lot of APIs that all architectures still have to duplicate. This series consolidates the remaining functions, although we still need arch opt outs for two of them as a few architectures have very non-standard implementations. This patch (of 5): The coherent DMA allocator works the same over all architectures supporting dma_map operations. This patch consolidates them and converges the minor differences: - the debug_dma helpers are now called from all architectures, including those that were previously missing them - dma_alloc_from_coherent and dma_release_from_coherent are now always called from the generic alloc/free routines instead of the ops dma-mapping-common.h always includes dma-coherent.h to get the defintions for them, or the stubs if the architecture doesn't support this feature - checks for ->alloc / ->free presence are removed. There is only one magic instead of dma_map_ops without them (mic_dma_ops) and that one is x86 only anyway. Besides that only x86 needs special treatment to replace a default devices if none is passed and tweak the gfp_flags. An optional arch hook is provided for that. [linux@roeck-us.net: fix build] [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yinghai Lu 提交于
When loading x86 64bit kernel above 4GiB with patched grub2, got kernel gunzip error. | early console in decompress_kernel | decompress_kernel: | input: [0x807f2143b4-0x807ff61aee] | output: [0x807cc00000-0x807f3ea29b] 0x027ea29c: output_len | boot via startup_64 | KASLR using RDTSC... | new output: [0x46fe000000-0x470138cfff] 0x0338d000: output_run_size | decompress: [0x46fe000000-0x47007ea29b] <=== [0x807f2143b4-0x807ff61aee] | | Decompressing Linux... gz... | | uncompression error | | -- System halted the new buffer is at 0x46fe000000ULL, decompressor_gzip is using 0xffffffb901ffffff as out_len. gunzip in lib/zlib_inflate/inflate.c cap that len to 0x01ffffff and decompress fails later. We could hit this problem with crashkernel booting that uses kexec loading kernel above 4GiB. We have decompress_* support: 1. inbuf[]/outbuf[] for kernel preboot. 2. inbuf[]/flush() for initramfs 3. fill()/flush() for initrd. This bug only affect kernel preboot path that use outbuf[]. Add __decompress and take real out_buf_len for gunzip instead of guessing wrong buf size. Fixes: 1431574a (lib/decompressors: fix "no limit" output buffer length) Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jon Medhurst <tixy@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 7月, 2015 3 次提交
-
-
由 Peter Zijlstra 提交于
Move the now generic definitions of atomic_{set,clear}_mask() into linux/atomic.h to avoid endless and pointless repetition. Also, provide an atomic_andnot() wrapper for those few archs that can implement that. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Peter Zijlstra 提交于
Implement atomic logic ops -- atomic_{or,xor,and}. These will replace the atomic_{set,clear}_mask functions that are available on some archs. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Peter Zijlstra 提交于
Implement atomic logic ops -- atomic_{or,xor,and} These will replace the atomic_{set,clear}_mask functions that are available on some archs. Also rework the atomic implementation in terms of CPP macros to avoid the typical repetition -- I seem to have missed this arch the last time around when I did that. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 18 7月, 2015 1 次提交
-
-
由 Laurent Dufour 提交于
Commit 2ae416b1 ("mm: new mm hook framework") introduced an empty header file (mm-arch-hooks.h) for every architecture, even those which doesn't need to define mm hooks. As suggested by Geert Uytterhoeven, this could be cleaned through the use of a generic header file included via each per architecture asm/include/Kbuild file. The PowerPC architecture is not impacted here since this architecture has to defined the arch_remap MM hook. Signed-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NVineet Gupta <vgupta@synopsys.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 6月, 2015 14 次提交
-
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
- h8300h_sim: GDB H8/300H simulator - h8s_sim: GDB H8S simulator - edosk2674: Renesas EDOSK2674R Evalution board Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
h8300h-sim_defconfig: GDB simulator H8/300H mode. h8s-sim_defconfig: GDB simulator H8S mode. edosk2674_defconfig: Renesas EDOSK2674R. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
h8300's Makefile, Kconfig and memory layout. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
-