In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

When compiling executables from a single .c file, the linker is also
invoked. Pass the HOSTLDFLAGS like for other linker commands.
Signed-off-by: NRobin Jarry <robin.jarry@6wind.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

For the out-of-tree build, scripts/Makefile.build creates output
directories, but this operation is not efficient.

scripts/Makefile.lib calculates obj-dirs as follows:

  obj-dirs := $(dir $(multi-objs) $(obj-y))

Please notice $(sort ...) is not used here.  Usually the result is
as many "./" as objects here.

For a lot of duplicated paths, the following command is invoked.

  _dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))

Then, the costly shell command is run over and over again.

I see many points for optimization:

[1] Use $(sort ...) to cut down duplicated paths before passing them
    to system call
[2] Use single $(shell ...) instead of repeating it with $(foreach ...)
    This will reduce forking.
[3] We can calculate obj-dirs more simply.  Most of objects are already
    accumulated in $(targets).  So, $(dir $(targets)) is fine and more
    comprehensive.

I also removed ugly code in arch/x86/entry/vdso/Makefile.  This is now
really unnecessary.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Tested-by: NDouglas Anderson <dianders@chromium.org>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

cc-option uses KBUILD_CFLAGS and KBUILD_CPPFLAGS when it determines
whether an option is supported or not. This is fine for options used to
build the kernel itself, however some components like the x86 boot code
use a different set of flags.

Add the new macro __cc-option which is a more generic version of
cc-option with additional parameters. One parameter is the compiler
with which the check should be performed, the other the compiler options
to be used instead KBUILD_C*FLAGS.

Refactor cc-option and hostcc-option to use __cc-option and move
hostcc-option to scripts/Kbuild.include.
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Suggested-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NMichal Marek <mmarek@suse.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Infrastructure for building independent shared library targets.

Based on work created by the PaX Team.
Signed-off-by: NEmese Revfy <re.emese@gmail.com>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NMichal Marek <mmarek@suse.com>

Assume we have a Makefile like:

hostprogs-y := foo bar
foo-objs := foo1.o foo2.o
bar-objs := bar1.o bar2.o

Without this commit, the host program foo depends on all of
foo1.o foo2.o bar1.o bar2.o.

This commit allows to handle the dependency of each host program
separately.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Assume we have a Makefile like this:

  hostprogs-y := foo
  foo-cxxobjs := bar/baz.o
  foo-objs := qux/quux.o

In this case, Kbuild creates bar/ directory,
but fails to create qux/ directory.

This commit re-writes directory creation more simply,
fixing that bug.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The directory creation can be more simplified by two levels.

[1] Drop $(dir ...)

 $(dir $(f)) always returns non-empty string.

So, $(if $(dir $(f)),$(dir $(f)) is equivalent to $(dir $(f)).

[2] Unroll $(foreach ...) loop

$(dir ...) can take one or more arguments and returns a list of
directories of them.

$(foreach f, $(progs), $(dir $(f))) can be unrolled as $(dir $(progs)).
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The shared library feature in Makefile.host is no longer used.
Rip it off to keep the build infrastucture simple.

Update Documentation/kbuild/makefiles.txt too.
The section "4.3 Definition shared libraries" should be removed
and the following sections should be re-numbered.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Suggested-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The comment claims:
  C++ executables compiled from at least one .cc file
  and zero or more .c files

But C++ executables with zero .c file fail in build.

For example, assume we have a Makefile like this:

  hostprogs-y := foo
  foo-cxxobjs := bar.o

In this case, foo is treated as host-csingle
and Kbuild tries to search non-existing foo.c source.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

To introduce support for source in one directory but output files
in another directory during a non O= build prefix all paths
with $(src) repsectively $(obj).
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

hostprogs-y only supported creating output directory for the final
program. Extend this to also cover the situation where a .o
file (used when host program is made from compositie objects) is
locate in another directory.
First user of this is the built-in lxdialog that.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NRoss Biro <rossb@google.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

kbuild used $¤(*F to get filename of target without extension.
This was used in several places all over kbuild, but introducing
make -rR broke his for all cases where we specified full path to
target/prerequsite. It is assumed that make -rR disables old style
suffix-rules which is why is suddenly failed.

ia64 was impacted by this change because several div* routines in
arch/ia64/lib are build using explicit paths and then kbuild failed.

Thanks to David Mosberger-Tang <David.Mosberger@acm.org> for an explanation
what was the root-cause and for testing on ia64.

This patch also fixes two uses of $(*F) in arch/um
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This reverts commit e5c44fd8.

Thanks to Daniel Ritz and Michal Piotrowski for noticing the problem.

Daniel says:

  "[The] reason is a recent change that made modules always shows as
   module.mod.  it breaks modprobe and probably many scripts..besides
   lsmod looking horrible

   stuff like this in modprobe.conf:
        install pcmcia_core /sbin/modprobe --ignore-install pcmcia_core; /sbin/modprobe pcmcia
   makes modprobe fork/exec endlessly calling itself...until oom
   interrupts it"
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

make failed to supply the filename when using make -rR and using $(*F)
to get target filename without extension.
This bug was not reproduceable in small scale but using:
$(basename $(notdir $@)) fixes it with same functionality.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

When Makefile.host is included, $(obj-dirs) is subjected to the
addprefix operation for the second time.  Prefix only needs to be added
to the newly added directories, but not to those that came from
Makefile.lib.

This causes the build system to create unneeded empty directories in the
build tree when building in a separate directory.  For instance,
lib/lib/zlib_inflate is created in the build tree.
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Single-file HOSTCC calls added the libraries from $(HOSTLOADLIBES),
but not from $(HOSTLOADLIBES_programname). Multi-file HOSTCC calls do
both.

This patch fixes that inconsistency.
Signed-Off-By: NMatthias Urlichs <smurf@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!