This is what the ioctl based nbd disconnect does as well.  Without this
the device will just sit there and wait for the connection to go away
(or IO to occur) before the device gets torn down.  Instead clear
everything up on our end so the configuration goes away as quickly as
possible.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When we stopped relying on the bdev everywhere I broke updating the
block device size on the fly, which ceph relies on.  We can't just do
set_capacity, we also have to do bd_set_size so things like parted will
notice the device size change.

Fixes: 29eaadc0 ("nbd: stop using the bdev everywhere")
cc: stable@vger.kernel.org
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

I messed up changing the size of an NBD device while it was connected by
not actually updating the device or doing the uevent.  Fix this by
updating everything if we're connected and we change the size.

cc: stable@vger.kernel.org
Fixes: 639812a1 ("nbd: don't set the device size until we're connected")
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This fixes a use after free bug, we shouldn't be doing disk->queue right
after we do del_gendisk(disk).  Save the queue and do the cleanup after
the del_gendisk.

Fixes: c6a4759e ("nbd: add device refcounting")
cc: stable@vger.kernel.org
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Nobody is using it anymore, and it's been abandoned. Since David
is fine with removing it, kill it.
Suggested-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Found a bug (with ASAN) where we were passing a bio to bio_copy_data()
with bi_next not NULL, when it should have been - a driver had left
bi_next set to something after calling bio_endio().

Since the normal case is only copying single bios, split out
bio_list_copy_data() to avoid more bugs like this in the future.
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Minor optimization - remove a pointer indirection when using fs_bio_set.
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Same numerical value (for now at least), but a much better documentation
of intent.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk_old_get_request already has it at hand, and in blk_queue_bio, which
is the fast path, it is constant.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Switch everyone to blk_get_request_flags, and then rename
blk_get_request_flags to blk_get_request.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Always GFP_KERNEL, and keeping it would cause serious complications for
the next change.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fixes: 7c2d748e ("memstick: don't call blk_queue_bounce_limit")
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The ps3disk driver already kmaps all pages when copying from/to the
internal bounce buffer, so it can accept highmem pages just fine.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Just kmap the bio single page payload before processing it.

(and yes, now highmem on sparc32 anyway, but kmap_(un)map atomic are nops,
so this gives the right example)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use kmap_atomic when copying out of a bio_vec.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Just kmap the single payload page before passing it on to the FTL.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

All in-tree host drivers set up a proper dma mask and use the dma-mapping
helpers.  This means they will be able to deal with any address that we
are throwing at them.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

DAC960 just sets the block bounce limit to the dma mask, which means
that the iommu or swiotlb already take care of the bounce buffering,
and the block bouncing can be removed.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

mtip32xx just sets the block bounce limit to the dma mask, which means
that the iommu or swiotlb already take care of the bounce buffering,
and the block bouncing can be removed.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Branch to the right label in the error handling path in order to keep it
logical.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This commit sets QUEUE_FLAG_NONROT and clears up QUEUE_FLAG_ADD_RANDOM
to mark the ramdisks as non-rotational device.
Signed-off-by: NSeongJae Park <sj38.park@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, struct request has four timestamp fields:

- A start time, set at get_request time, in jiffies, used for iostats
- An I/O start time, set at start_request time, in ktime nanoseconds,
  used for blk-stats (i.e., wbt, kyber, hybrid polling)
- Another start time and another I/O start time, used for cfq and bfq

These can all be consolidated into one start time and one I/O start
time, both in ktime nanoseconds, shaving off up to 16 bytes from struct
request depending on the kernel config.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

syzbot is hitting WARN() triggered by memory allocation fault
injection [1] because loop module is calling sysfs_remove_group()
when sysfs_create_group() failed.
Fix this by remembering whether sysfs_create_group() succeeded.

[1] https://syzkaller.appspot.com/bug?id=3f86c0edf75c86d2633aeb9dd69eccc70bc7e90bSigned-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Nsyzbot <syzbot+9f03168400f56df89dbc6f1751f4458fe739ff29@syzkaller.appspotmail.com>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Renamed sysfs_ready -> sysfs_inited.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This reverts commit 22072e83 as it is
broken.

Alan writes:
	What you can't see just from reading the patch is that in both
	cases (ehci->itd_pool and ehci->sitd_pool) there are two
	allocation paths -- the two branches of an "if" statement -- and
	only one of the paths calls dma_pool_[z]alloc.  However, the
	memset is needed for both paths, and so it can't be eliminated.
	Given that it must be present, there's no advantage to calling
	dma_pool_zalloc rather than dma_pool_alloc.
Reported-by: NErick Cafferata <erick@cafferata.me>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

As reported by Randy Dunlap:
>> WARNING: unmet direct dependencies detected for DELL_SMBIOS
>>   Depends on [m]: X86 [=y] && X86_PLATFORM_DEVICES [=y]
>>	&& (DCDBAS [=m] ||
>> DCDBAS [=m]=n) && (ACPI_WMI [=n] || ACPI_WMI [=n]=n)
>>   Selected by [y]:
>>   - DELL_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y]
>> && DMI [=y]
>> && BACKLIGHT_CLASS_DEVICE [=y] && (ACPI_VIDEO [=n] ||
>>	ACPI_VIDEO [=n]=n)
>> && (RFKILL [=n] || RFKILL [=n]=n) && SERIO_I8042 [=y]
>>

Right now it's possible to set dell laptop to compile in but this
causes dell-smbios to compile in which breaks if dcdbas is a module.

Dell laptop shouldn't select dell-smbios anymore, but depend on it.

Fixes: 32d7b19b (platform/x86: dell-smbios: Resolve dependency error on DCDBAS)
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NMario Limonciello <mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>

When the module is removed the led workqueue is destroyed in the remove
callback, before the led device is unregistered from the led subsystem.

This leads to a NULL pointer derefence when the led device is
unregistered automatically later as part of the module removal cleanup.
Bellow is the backtrace showing the problem.

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: __queue_work+0x8c/0x410
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP NOPTI
  Modules linked in: ccm edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 joydev crypto_simd asus_nb_wmi glue_helper uvcvideo snd_hda_codec_conexant snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel asus_wmi snd_hda_codec cryptd snd_hda_core sparse_keymap videobuf2_vmalloc arc4 videobuf2_memops snd_hwdep input_leds videobuf2_v4l2 ath9k psmouse videobuf2_core videodev ath9k_common snd_pcm ath9k_hw media fam15h_power ath k10temp snd_timer mac80211 i2c_piix4 r8169 mii mac_hid cfg80211 asus_wireless(-) snd soundcore wmi shpchp 8250_dw ip_tables x_tables amdkfd amd_iommu_v2 amdgpu radeon chash i2c_algo_bit drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ahci ttm libahci drm video
  CPU: 3 PID: 2177 Comm: rmmod Not tainted 4.15.0-5-generic #6+dev94.b4287e5bem1-Endless
  Hardware name: ASUSTeK COMPUTER INC. X555DG/X555DG, BIOS 5.011 05/05/2015
  RIP: 0010:__queue_work+0x8c/0x410
  RSP: 0018:ffffbe8cc249fcd8 EFLAGS: 00010086
  RAX: ffff992ac6810800 RBX: 0000000000000000 RCX: 0000000000000008
  RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff992ac6400e18
  RBP: ffffbe8cc249fd18 R08: ffff992ac6400db0 R09: 0000000000000000
  R10: 0000000000000040 R11: ffff992ac6400dd8 R12: 0000000000002000
  R13: ffff992abd762e00 R14: ffff992abd763e38 R15: 000000000001ebe0
  FS:  00007f318203e700(0000) GS:ffff992aced80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 00000001c720e000 CR4: 00000000001406e0
  Call Trace:
   queue_work_on+0x38/0x40
   led_state_set+0x2c/0x40 [asus_wireless]
   led_set_brightness_nopm+0x14/0x40
   led_set_brightness+0x37/0x60
   led_trigger_set+0xfc/0x1d0
   led_classdev_unregister+0x32/0xd0
   devm_led_classdev_release+0x11/0x20
   release_nodes+0x109/0x1f0
   devres_release_all+0x3c/0x50
   device_release_driver_internal+0x16d/0x220
   driver_detach+0x3f/0x80
   bus_remove_driver+0x55/0xd0
   driver_unregister+0x2c/0x40
   acpi_bus_unregister_driver+0x15/0x20
   asus_wireless_driver_exit+0x10/0xb7c [asus_wireless]
   SyS_delete_module+0x1da/0x2b0
   entry_SYSCALL_64_fastpath+0x24/0x87
  RIP: 0033:0x7f3181b65fd7
  RSP: 002b:00007ffe74bcbe18 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
  RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3181b65fd7
  RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555ea2559258
  RBP: 0000555ea25591f0 R08: 00007ffe74bcad91 R09: 000000000000000a
  R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000003
  R13: 00007ffe74bcae00 R14: 0000000000000000 R15: 0000555ea25591f0
  Code: 01 00 00 02 0f 85 7d 01 00 00 48 63 45 d4 48 c7 c6 00 f4 fa 87 49 8b 9d 08 01 00 00 48 03 1c c6 4c 89 f7 e8 87 fb ff ff 48 85 c0 <48> 8b 3b 0f 84 c5 01 00 00 48 39 f8 0f 84 bc 01 00 00 48 89 c7
  RIP: __queue_work+0x8c/0x410 RSP: ffffbe8cc249fcd8
  CR2: 0000000000000000
  ---[ end trace 7aa4f4a232e9c39c ]---

Unregistering the led device on the remove callback before destroying the
workqueue avoids this problem.

https://bugzilla.kernel.org/show_bug.cgi?id=196097Reported-by: NDun Hum <bitter.taste@gmx.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>

From now on, I'll start using my @kernel.org as my development e-mail.

As such, let's remove the entries that point to the old
mchehab@s-opensource.com at MAINTAINERS file.

For the files written with a copyright with mchehab@s-opensource,
let's keep Samsung on their names, using mchehab+samsung@kernel.org,
in order to keep pointing to my employer, with sponsors the work.

For the files written before I join Samsung (on July, 4 2013),
let's just use mchehab@kernel.org.

For bug reports, we can simply point to just kernel.org, as
this will reach my mchehab+samsung inbox anyway.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NBrian Warner <brian.warner@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Fix inconsistent IS_ERR and PTR_ERR in imx_csi_probe.
The proper pointer to be passed as argument is pinctrl
instead of priv->vdev.

This issue was detected with the help of Coccinelle.

Fixes: 52e17089 ("media: imx: Don't initialize vars that won't be used")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Tested-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When commit [1] was added, SGID was queried to derive the SMAC address.
Then, later on during a refactor [2], SMAC was no longer needed. However,
the now useless GID query remained.  Then during additional code changes
later on, the GID query was being done in such a way that it caused iWARP
queries to start breaking.  Remove the useless GID query and resolve the
iWARP breakage at the same time.

This is discussed in [3].

[1] commit dd5f03be ("IB/core: Ethernet L2 attributes in verbs/cm structures")
[2] commit 5c266b23 ("IB/cm: Remove the usage of smac and vid of qp_attr and cm_av")
[3] https://www.spinics.net/lists/linux-rdma/msg63951.htmlSuggested-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When the kernel was compiled using the UBSAN option,
we saw the following stack trace:

[ 1184.827917] UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx4/mr.c:349:27
[ 1184.828114] signed integer overflow:
[ 1184.828247] -2147483648 - 1 cannot be represented in type 'int'

The problem was caused by calling round_up in procedure
mlx4_ib_umem_calc_optimal_mtt_size (on line 349, as noted in the stack
trace) with the second parameter (1 << block_shift) (which is an int).
The second parameter should have been (1ULL << block_shift) (which
is an unsigned long long).

(1 << block_shift) is treated by the compiler as an int (because 1 is
an integer).

Now, local variable block_shift is initialized to 31.
If block_shift is 31, 1 << block_shift is 1 << 31 = 0x80000000=-214748368.
This is the most negative int value.

Inside the round_up macro, there is a cast applied to ((1 << 31) - 1).
However, this cast is applied AFTER ((1 << 31) - 1) is calculated.
Since (1 << 31) is treated as an int, we get the negative overflow
identified by UBSAN in the process of calculating ((1 << 31) - 1).

The fix is to change (1 << block_shift) to (1ULL << block_shift) on
line 349.

Fixes: 9901abf5 ("IB/mlx4: Use optimal numbers of MTT entries")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When IRQ affinity is set and the interrupt type is unknown, a cpu
mask allocated within the function is never freed. Fix this memory
leak by allocating memory within the scope where it is used.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When allocating device data, if there's an allocation failure, the
already allocated memory won't be freed such as per-cpu counters.

Fix memory leaks in exception path by creating a common reentrant
clean up function hfi1_clean_devdata() to be used at driver unload
time and device data allocation failure.

To accomplish this, free_platform_config() and clean_up_i2c() are
changed to be reentrant to remove dependencies when they are called
in different order. This helps avoid NULL pointer dereferences
introduced by this patch if those two functions weren't reentrant.

In addition, set dd->int_counter, dd->rcv_limit,
dd->send_schedule and dd->tx_opstats to NULL after they're freed in
hfi1_clean_devdata(), so that hfi1_clean_devdata() is fully reentrant.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When an invalid num_vls is used as a module parameter, the code
execution follows an exception path where the macro dd_dev_err()
expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This
causes a NULL pointer dereference.

Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev
earlier in the code. If a dd exists, then dd->pcidev and
dd->pcidev->dev always exists.

BUG: unable to handle kernel NULL pointer dereference
at 00000000000000f0
IP: __dev_printk+0x15/0x90
Workqueue: events work_for_cpu_fn
RIP: 0010:__dev_printk+0x15/0x90
Call Trace:
 dev_err+0x6c/0x90
 ? hfi1_init_pportdata+0x38d/0x3f0 [hfi1]
 hfi1_init_dd+0xdd/0x2530 [hfi1]
 ? pci_conf1_read+0xb2/0xf0
 ? pci_read_config_word.part.9+0x64/0x80
 ? pci_conf1_write+0xb0/0xf0
 ? pcie_capability_clear_and_set_word+0x57/0x80
 init_one+0x141/0x490 [hfi1]
 local_pci_probe+0x3f/0xa0
 work_for_cpu_fn+0x10/0x20
 process_one_work+0x152/0x350
 worker_thread+0x1cf/0x3e0
 kthread+0xf5/0x130
 ? max_active_store+0x80/0x80
 ? kthread_bind+0x10/0x10
 ? do_syscall_64+0x6e/0x1a0
 ? SyS_exit_group+0x10/0x10
 ret_from_fork+0x35/0x40

Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

AHG may be armed to use the stored header, which by design is limited
to edits in the PSN/A 32 bit word (bth2).

When the code is trying to send a BECN, the use of the stored header
will lose the BECN bit.

Fix by avoiding AHG when getting ready to send a BECN. This is
accomplished by always claiming the packet is not a middle packet which
is an AHG precursor.  BECNs are not a normal case and this should not
hurt AHG optimizations.

Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The module parameter num_user_context is defined as 'int' and
defaults to -1.  The module_param_named() says that it is uint.

Correct module_param_named() type information and update the modinfo
text to reflect the default value.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The code for handling a marked UD packet unconditionally returns the
dlid in the header of the FECN marked packet.  This is not correct
for multicast packets where the DLID is in the multicast range.

The subsequent attempt to send the CNP with the multicast lid will
cause the chip to halt the ack send context because the source
lid doesn't match the chip programming.   The send context will
be halted and flush any other pending packets in the pio ring causing
the CNP to not be sent.

A part of investigating the fix, it was determined that the 16B work
broke the FECN routine badly with inconsistent use of 16 bit and 32 bits
types for lids and pkeys.  Since the port's source lid was correctly 32
bits the type mixmatches need to be dealt with at the same time as
fixing the CNP header issue.

Fix these issues by:
- Using the ports lid for as the SLID for responding to FECN marked UD
  packets
- Insure pkey is always 16 bit in this and subordinate routines
- Insure lids are 32 bits in this and subordinate routines

Cc: <stable@vger.kernel.org> # 4.14.x
Fixes: 88733e3b ("IB/hfi1: Add 16B UD support")
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Trivial fix to spelling mistake in DP_NOTICE message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the I2C adapter that the PD controller is attached to
does not support SMBus protocol, the driver needs to handle
block reads separately. The first byte returned in block
read protocol will show the total number of bytes. It needs
to be stripped away.

This is handled separately in the driver only because right
now we have no way of requesting the used protocol with
regmap-i2c. This is in practice a workaround for what is
really a problem in regmap-i2c. The other option would have
been to register custom regmap, or not use regmap at all,
however, since the solution is very simple, I choose to use
it in this case for convenience. It is easy to remove once
we figure out how to handle this kind of cases in
regmap-i2c.

Fixes: 0a4c005b ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The ref count for the USB role switch device must be
released after we are done using the switch.

Fixes: c6962c29 ("usb: typec: tcpm: Set USB role switch to device mode when configured as such")
Signed-off-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Some non-compliant high-speed USB devices have bulk endpoints with a
1024-byte maxpacket size.  Although such endpoints don't work with
xHCI host controllers, they do work with EHCI controllers.  We used to
accept these invalid sizes (with a warning), but we no longer do
because of an unintentional change introduced by commit aed9d65a
("USB: validate wMaxPacketValue entries in endpoint descriptors").

This patch restores the old behavior, so that people with these
peculiar devices can use them without patching their kernels by hand.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Suggested-by: NElvinas <elvinas@veikia.lt>
Fixes: aed9d65a ("USB: validate wMaxPacketValue entries in endpoint descriptors")
CC: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>