Pull PCI fixes from Bjorn Helgaas:
 "These are fixes for things we merged for v4.3 (VPD, MSI, and bridge
  window management), and a new Renesas R8A7794 SoC device ID.

  Details:

  Resource management:
   - Revert pci_read_bridge_bases() unification (Bjorn Helgaas)
   - Clear IORESOURCE_UNSET when clipping a bridge window (Bjorn
     Helgaas)

  MSI:
   - Fix MSI IRQ domains for VFs on virtual buses (Alex Williamson)

  Renesas R-Car host bridge driver:
   - Add R8A7794 support (Sergei Shtylyov)

  Miscellaneous:
   - Fix devfn for VPD access through function 0 (Alex Williamson)
   - Use function 0 VPD only for identical functions (Alex Williamson)"

* tag 'pci-v4.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: rcar: Add R8A7794 support
  PCI: Use function 0 VPD for identical functions, regular VPD for others
  PCI: Fix devfn for VPD access through function 0
  PCI/MSI: Fix MSI IRQ domains for VFs on virtual buses
  PCI: Clear IORESOURCE_UNSET when clipping a bridge window
  PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"

Pull KVM fixes from Paolo Bonzini:
 "AMD fixes for bugs introduced in the 4.2 merge window, and a few PPC
  bug fixes too"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: disable halt_poll_ns as default for s390x
  KVM: x86: fix off-by-one in reserved bits check
  KVM: x86: use correct page table format to check nested page table reserved bits
  KVM: svm: do not call kvm_set_cr0 from init_vmcb
  KVM: x86: trap AMD MSRs for the TSeg base and mask
  KVM: PPC: Book3S: Take the kvm->srcu lock in kvmppc_h_logical_ci_load/store()
  KVM: PPC: Book3S HV: Pass the correct trap argument to kvmhv_commence_exit
  KVM: PPC: Book3S HV: Fix handling of interrupted VCPUs
  kvm: svm: reset mmu on VCPU reset

Pull powerpc fixes from Michael Ellerman:
 - Wire up sys_membarrier()
 - cxl: Fix lockdep warning while creating afu_err_buff from Vaibhav

* tag 'powerpc-4.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  cxl: Fix lockdep warning while creating afu_err_buff attribute
  powerpc: Wire up sys_membarrier()

We observed some performance degradation on s390x with dynamic
halt polling. Until we can provide a proper fix, let's enable
halt_poll_ns as default only for supported architectures.

Architectures are now free to set their own halt_poll_ns
default value.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

29ecd660 ("KVM: x86: avoid uninitialized variable warning",
2015-09-06) introduced a not-so-subtle problem, which probably
escaped review because it was not part of the patch context.

Before the patch, leaf was always equal to iterator.level.  After,
it is equal to iterator.level - 1 in the call to is_shadow_zero_bits_set,
and when is_shadow_zero_bits_set does another "-1" the check on
reserved bits becomes incorrect.  Using "iterator.level" in the call
fixes this call trace:

WARNING: CPU: 2 PID: 17000 at arch/x86/kvm/mmu.c:3385 handle_mmio_page_fault.part.93+0x1a/0x20 [kvm]()
Modules linked in: tun sha256_ssse3 sha256_generic drbg binfmt_misc ipv6 vfat fat fuse dm_crypt dm_mod kvm_amd kvm crc32_pclmul aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd fam15h_power amd64_edac_mod k10temp edac_core amdkfd amd_iommu_v2 radeon acpi_cpufreq
[...]
Call Trace:
  dump_stack+0x4e/0x84
  warn_slowpath_common+0x95/0xe0
  warn_slowpath_null+0x1a/0x20
  handle_mmio_page_fault.part.93+0x1a/0x20 [kvm]
  tdp_page_fault+0x231/0x290 [kvm]
  ? emulator_pio_in_out+0x6e/0xf0 [kvm]
  kvm_mmu_page_fault+0x36/0x240 [kvm]
  ? svm_set_cr0+0x95/0xc0 [kvm_amd]
  pf_interception+0xde/0x1d0 [kvm_amd]
  handle_exit+0x181/0xa70 [kvm_amd]
  ? kvm_arch_vcpu_ioctl_run+0x68b/0x1730 [kvm]
  kvm_arch_vcpu_ioctl_run+0x6f6/0x1730 [kvm]
  ? kvm_arch_vcpu_ioctl_run+0x68b/0x1730 [kvm]
  ? preempt_count_sub+0x9b/0xf0
  ? mutex_lock_killable_nested+0x26f/0x490
  ? preempt_count_sub+0x9b/0xf0
  kvm_vcpu_ioctl+0x358/0x710 [kvm]
  ? __fget+0x5/0x210
  ? __fget+0x101/0x210
  do_vfs_ioctl+0x2f4/0x560
  ? __fget_light+0x29/0x90
  SyS_ioctl+0x4c/0x90
  entry_SYSCALL_64_fastpath+0x16/0x73
---[ end trace 37901c8686d84de6 ]---
Reported-by: NBorislav Petkov <bp@alien8.de>
Tested-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Intel CPUID on AMD host or vice versa is a weird case, but it can
happen.  Handle it by checking the host CPU vendor instead of the
guest's in reset_tdp_shadow_zero_bits_mask.  For speed, the
check uses the fact that Intel EPT has an X (executable) bit while
AMD NPT has NX.
Reported-by: NBorislav Petkov <bp@alien8.de>
Tested-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm_set_cr0 may want to call kvm_zap_gfn_range and thus access the
memslots array (SRCU protected).  Using a mini SRCU critical section
is ugly, and adding it to kvm_arch_vcpu_create doesn't work because
the VMX vcpu_create callback calls synchronize_srcu.

Fixes this lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
4.3.0-rc1+ #1 Not tainted
-------------------------------
include/linux/kvm_host.h:488 suspicious rcu_dereference_check() usage!

other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
1 lock held by qemu-system-i38/17000:
 #0:  (&(&kvm->mmu_lock)->rlock){+.+...}, at: kvm_zap_gfn_range+0x24/0x1a0 [kvm]

[...]
Call Trace:
 dump_stack+0x4e/0x84
 lockdep_rcu_suspicious+0xfd/0x130
 kvm_zap_gfn_range+0x188/0x1a0 [kvm]
 kvm_set_cr0+0xde/0x1e0 [kvm]
 init_vmcb+0x760/0xad0 [kvm_amd]
 svm_create_vcpu+0x197/0x250 [kvm_amd]
 kvm_arch_vcpu_create+0x47/0x70 [kvm]
 kvm_vm_ioctl+0x302/0x7e0 [kvm]
 ? __lock_is_held+0x51/0x70
 ? __fget+0x101/0x210
 do_vfs_ioctl+0x2f4/0x560
 ? __fget_light+0x29/0x90
 SyS_ioctl+0x4c/0x90
 entry_SYSCALL_64_fastpath+0x16/0x73
Reported-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pull thermal management fixes from Zhang Rui:

 - Power allocator governor changes to allow binding on thermal zones
   with missing power estimates information.  From Javi Merino.

 - Add compile test flags on thermal drivers that allow it without
   producing compilation errors.  From Eduardo Valentin.

 - Fixes around memory allocation on cpu_cooling.  From Javi Merino.

 - Fix on db8500 cpufreq code to allow autoload.  From Luis de
   Bethencourt.

 - Maintainer entries for cpu cooling device

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: power_allocator: exit early if there are no cooling devices
  thermal: power_allocator: don't require tzp to be present for the thermal zone
  thermal: power_allocator: relax the requirement of two passive trip points
  thermal: power_allocator: relax the requirement of a sustainable_power in tzp
  thermal: Add a function to get the minimum power
  thermal: cpu_cooling: free power table on error or when unregistering
  thermal: cpu_cooling: don't call kcalloc() under rcu_read_lock
  thermal: db8500_cpufreq_cooling: Fix module autoload for OF platform driver
  thermal: cpu_cooling: Add MAINTAINERS entry
  thermal: ti-soc: Kconfig fix to avoid menu showing wrongly
  thermal: ti-soc: allow compile test
  thermal: qcom_spmi: allow compile test
  thermal: exynos: allow compile test
  thermal: armada: allow compile test
  thermal: dove: allow compile test
  thermal: kirkwood: allow compile test
  thermal: rockchip: allow compile test
  thermal: spear: allow compile test
  thermal: hisi: allow compile test
  thermal: Fix thermal_zone_of_sensor_register to match documentation

Pull DeviceTree fixes from Rob Herring:
 - Silence bogus warning for of_irq_parse_pci
 - Fix typo in ARM idle-states binding doc and dts files
 - Various minor binding documentation updates

* tag 'devicetree-fixes-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  Documentation: arm: Fix typo in the idle-states bindings examples
  gpio: mention in DT binding doc that <name>-gpio is deprecated
  of_pci_irq: Silence bogus "of_irq_parse_pci() failed ..." messages.
  devicetree: bindings: Extend the bma180 bindings with bma250 info
  of: thermal: Mark cooling-*-level properties optional
  of: thermal: Fix inconsitency between cooling-*-state and cooling-*-level
  Docs: dt: add #msi-cells to GICv3 ITS binding
  of: add vendor prefix for Socionext Inc.

The idle-states bindings mandate that the entry-method string
in the idle-states node must be "psci" for ARM v8 64-bit systems,
but the examples in the bindings report a wrong entry-method string.
Owing to this typo, some dts in the kernel wrongly defined the
entry-method property, since they likely cut and pasted the example
definition without paying attention to the bindings definitions.

This patch fixes the typo in the DT idle states bindings examples and
respective dts in the kernel so that the bindings and related dts
files are made compliant.
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Howard Chen <howard.chen@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: NRob Herring <robh@kernel.org>

The gpiolib supports parsing DT properties of the form <name>-gpio but it
was only added for compatibility with older DT bindings that got it wrong
and should not be used in newer bindings.

The commit that added support for this was:

dd34c37a ("gpio: of: Allow -gpio suffix for property names")

but didn't update the documentation to explain this so it's been a source
of confusion. So let's make this clear in the GPIO DT binding doc.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NRob Herring <robh@kernel.org>

Pull drm fixes from Dave Airlie:
 "Most of the GPU drivers people were at XDC last week, so I didn't get
  much to send, so I let it rollover until this week.

  Also Alex was away for 3 weeks so amdgpu/radeon got a bit more stuff
  than usual in one go.

  I've been trying to figure out some 4.2 issues with i915 still (that
  are fixed in 4.3, but bisecting ends up in a merge commit).  Hopefully
  next week I or i915 people can work that out"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (46 commits)
  drm: Allow also control clients to check the drm version
  drm/vmwgfx: Fix uninitialized return in vmw_kms_helper_dirty()
  drm/vmwgfx: Fix uninitialized return in vmw_cotable_unbind()
  drm/layerscape: fix handling fsl_dcu_drm_plane_index result
  drm/mgag200: Fix driver_load error handling
  drm/mgag200: Fix error handling paths in fbdev driver
  drm/qxl: only report first monitor as connected if we have no state
  drm/radeon: add quirk for MSI R7 370
  drm/amdgpu: Sprinkle drm_modeset_lock_all to appease locking checks
  drm/radeon: Sprinkle drm_modeset_lock_all to appease locking checks
  drm/amdgpu: sync ce and me with SWITCH_BUFFER(2)
  drm/amdgpu: integer overflow in amdgpu_mode_dumb_create()
  drm/amdgpu: info leak in amdgpu_gem_metadata_ioctl()
  drm/amdgpu: integer overflow in amdgpu_info_ioctl()
  drm/amdgpu: unwind properly in amdgpu_cs_parser_init()
  drm/amdgpu: Fix max_vblank_count value for current display engines
  drm/amdgpu: use kmemdup rather than duplicating its implementation
  drm/amdgpu: fix UVD suspend and resume for VI APU
  drm/amdgpu: fix the UVD suspend sequence order
  drm/amdgpu: make UVD handle checking more strict
  ...

Add Renesas R8A7794 SoC support to the Renesas R-Car gen2 PCI driver.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NBjorn Helgaas <helgaas@kernel.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>

932c435c ("PCI: Add dev_flags bit to access VPD through function 0")
added PCI_DEV_FLAGS_VPD_REF_F0.  Previously, we set the flag on every
non-zero function of quirked devices.  If a function turned out to be
different from function 0, i.e., it had a different class, vendor ID, or
device ID, the flag remained set but we didn't make VPD accessible at all.

Flip this around so we only set PCI_DEV_FLAGS_VPD_REF_F0 for functions that
are identical to function 0, and allow regular VPD access for any other
functions.

[bhelgaas: changelog, stable tag]
Fixes: 932c435c ("PCI: Add dev_flags bit to access VPD through function 0")
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <helgaas@kernel.org>
Acked-by: NMyron Stowe <myron.stowe@redhat.com>
Acked-by: NMark Rustad <mark.d.rustad@intel.com>
CC: stable@vger.kernel.org

Commit 932c435c ("PCI: Add dev_flags bit to access VPD through function
0") passes PCI_SLOT(devfn) for the devfn parameter of pci_get_slot().
Generally this works because we're fairly well guaranteed that a PCIe
device is at slot address 0, but for the general case, including
conventional PCI, it's incorrect.  We need to get the slot and then convert
it back into a devfn.

Fixes: 932c435c ("PCI: Add dev_flags bit to access VPD through function 0")
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <helgaas@kernel.org>
Acked-by: NMyron Stowe <myron.stowe@redhat.com>
Acked-by: NMark Rustad <mark.d.rustad@intel.com>
CC: stable@vger.kernel.org

SR-IOV creates a virtual bus where bus->self is NULL.  When we add VFs and
scan for an MSI domain, pci_set_bus_msi_domain() dereferences bus->self,
which causes a kernel NULL pointer dereference oops.

Scan up to the parent bus until we find a real bridge where we can get the
MSI domain.

[bhelgaas: changelog]
Fixes: 44aa0c65 ("PCI/MSI: Add hooks to populate the msi_domain field")
Tested-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <helgaas@kernel.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

Merge misc fixes from Andrew Morton:
 "15 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  ocfs2/dlm: fix deadlock when dispatch assert master
  membarrier: clean up selftest
  vmscan: fix sane_reclaim helper for legacy memcg
  lib/iommu-common.c: do not try to deref a null iommu->lazy_flush() pointer when n < pool->hint
  x86, efi, kasan: #undef memset/memcpy/memmove per arch
  mm: migrate: hugetlb: putback destination hugepage to active list
  mm, dax: VMA with vm_ops->pfn_mkwrite wants to be write-notified
  userfaultfd: register uapi generic syscall (aarch64)
  userfaultfd: selftest: don't error out if pthread_mutex_t isn't identical
  userfaultfd: selftest: return an error if BOUNCE_VERIFY fails
  userfaultfd: selftest: avoid my_bcmp false positives with powerpc
  userfaultfd: selftest: only warn if __NR_userfaultfd is undefined
  userfaultfd: selftest: headers fixup
  userfaultfd: selftests: vm: pick up sanitized kernel headers
  userfaultfd: revert "userfaultfd: waitqueue: add nr wake parameter to __wake_up_locked_key"

a few drm/i915 fixes, including a fix to the recent regression
reported by Sedat Dilek

* tag 'drm-intel-fixes-2015-09-24' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/bios: handle MIPI Sequence Block v3+ gracefully
  drm/i915: Add primary plane to mask if it's visible
  drm/i915: workaround bad DSL readout v3
  drm/i915: fix kernel-doc warnings in intel_audio.c

Pull spi fixes from Mark Brown:
 "A disappointingly large collection of fixes for SPI issues, though
  almost all in drivers (and there mainly the newly added Mediatek
  driver) and the core fixes are documentation and error handling.

  The driver fixes are all of the usual 'important if you see them'
  variety"

* tag 'spi-fix-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: xtensa-xtfpga: fix register endianness
  spi: meson: Fix module autoload for OF platform driver
  spi: mediatek: fix wrong error return value on probe
  spi: fix kernel-doc warnings in spi.h
  spi: spidev: fix possible NULL dereference
  spi: atmel: remove warning when !CONFIG_PM_SLEEP
  spi: bcm2835: BUG: fix wrong use of PAGE_MASK
  spi: mediatek: fix spi cs polarity error
  spi: Fix documentation of spi_alloc_master()
  spi: spi-pxa2xx: Check status register to determine if SSSR_TINT is disabled
  spi: Mediatek: Document devicetree bindings update for spi bus
  spi: mediatek: fix spi clock usage error
  spi: mediatek: remove clk_disable_unprepare()

Merge tag 'regulator-fix-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A collection of fixes that came in since I tagged the merge window
  pull request for v4.3:

   - Error handling fixes in the core

   - Fixes to a couple of TI drivers for device specific issues

   - Several fixes for module autoloading"

* tag 'regulator-fix-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: vexpress: Fix module autoload for OF platform driver
  regulator: gpio: Fix module autoload for OF platform driver
  regulator: anatop: Fix module autoload for OF platform driver
  regulator: core: Correct return value check in regulator_resolve_supply
  regulator: tps65218: Fix missing zero typo
  regulator: pbias: program pbias register offset in pbias driver
  regulator: core: fix possible NULL dereference

Pull device mapper fixes from Mike Snitzer:
 "Two stable@ fixes:

   - DM thinp fix to properly advertise discard support as disabled for
     thin devices backed by a thin-pool with discard support disabled.

   - DM crypt fix to prevent the creation of bios that violate the
     underlying block device's max_segments limits.  This fixes a
     relatively long-standing NCQ SSD corruption issue reported against
     dm-crypt ever since the dm-crypt cpu parallelization patches were
     merged back in 4.0"

* tag 'dm-4.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm crypt: constrain crypt device's max_segment_size to PAGE_SIZE
  dm thin: disable discard support for thin devices if pool's is disabled

Pull request of 2015-09-24

Vmwgfx fixes for 4.3:
 - A couple of uninitialized variable fixes by Christian Engelmayer
 - A TTM fix for a bug that causes problems with the new vmwgfx device init
 - A vmwgfx refcounting fix
 - A vmwgfx iomem caching fix
 - A DRM change to allow also control clients to read the drm driver version.

* tag 'vmwgfx-fixes-4.3-150924' of git://people.freedesktop.org/~thomash/linux:
  drm: Allow also control clients to check the drm version
  drm/vmwgfx: Fix uninitialized return in vmw_kms_helper_dirty()
  drm/vmwgfx: Fix uninitialized return in vmw_cotable_unbind()
  drm/vmwgfx: Only build on X86
  drm/ttm: Fix memory space allocation v2
  drm/vmwgfx: Map the fifo as cached
  drm/vmwgfx: Fix up user_dmabuf refcounting

This should be harmless.
Vmware will, due to old infrastructure reasons, be using a privileged
control client to supply GUI layout information rather than obtaining
it from the device. That control client will be needing access to DRM
version information.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Acked-by: NDavid Herrmann <dh.herrmann@gmail.com>

Function vmw_kms_helper_dirty() uses the uninitialized variable ret as
return value. Make the result deterministic and directly return as the
variable is unused anyway. Detected by Coverity CID 1324255.
Signed-off-by: NChristian Engelmayer <cengelma@gmx.at>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

Function vmw_cotable_unbind() uses the uninitialized variable ret as
return value. Make the result deterministic and directly return as
the variable is unused anyway. Detected by Coverity CID 1324256.
Signed-off-by: NChristian Engelmayer <cengelma@gmx.at>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

radeon and amdgpu fixes for 4.3.  It's a bit bigger than usual since
it's 3 weeks worth of fixes since I was on vacation, then at XDC.
- lots of stability fixes
- suspend and resume fixes
- GPU scheduler fixes
- Misc other fixes

* 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux: (31 commits)
  drm/radeon: add quirk for MSI R7 370
  drm/amdgpu: Sprinkle drm_modeset_lock_all to appease locking checks
  drm/radeon: Sprinkle drm_modeset_lock_all to appease locking checks
  drm/amdgpu: sync ce and me with SWITCH_BUFFER(2)
  drm/amdgpu: integer overflow in amdgpu_mode_dumb_create()
  drm/amdgpu: info leak in amdgpu_gem_metadata_ioctl()
  drm/amdgpu: integer overflow in amdgpu_info_ioctl()
  drm/amdgpu: unwind properly in amdgpu_cs_parser_init()
  drm/amdgpu: Fix max_vblank_count value for current display engines
  drm/amdgpu: use kmemdup rather than duplicating its implementation
  drm/amdgpu: fix UVD suspend and resume for VI APU
  drm/amdgpu: fix the UVD suspend sequence order
  drm/amdgpu: make UVD handle checking more strict
  drm/amdgpu: Disable UVD PG
  drm/amdgpu: more scheduler cleanups v2
  drm/amdgpu: cleanup fence queue init v2
  drm/amdgpu: rename fence->scheduler to sched v2
  drm/amdgpu: cleanup entity init
  drm/amdgpu: refine the scheduler job type conversion
  drm/amdgpu: refine the job naming for amdgpu_job and amdgpu_sched_job
  ...

The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

mgag200_driver_load's error path just calls the drm driver's
driver_unload op. It isn't safe to call this because it doesn't handle
things well if driver_load fails somewhere mid way.

Replace the call to mgag200_driver_unload with a more finegrained
error handling path.

Link: http://lkml.kernel.org/r/55F6E68D.8070800@codeaurora.orgReported-by: NIngo Molnar <mingo@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Set up error handling in mgag200_fbdev_init and mgag200fb_create such that
they release the things they allocate, rather than relying on someone
calling mga_fbdev_destroy.

Based on a patch by Sudip Mukherjee <sudipm.mukherjee@gmail.com>

Link: http://lkml.kernel.org/r/55F6E68D.8070800@codeaurora.orgReported-by: NIngo Molnar <mingo@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If the server isn't new enough to give us state, report the first
monitor as always connected, otherwise believe the server side.

Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Just adds the quirk for MSI R7 370 Armor 2X
Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=91294Signed-off-by: NMaxim Sheviakov <mrader3940@yandex.ru>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In

commit 7a3f3d66
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jul 9 23:44:28 2015 +0200

    drm: Check locking in drm_for_each_connector

I added locking checks to drm_for_each_connector but failed that
through drm_helper_connector_dpms -> drm_helper_choose_encoder_dpms
it's used in a few more places in the amdgpu resume/suspend code.

Fix them up.

Note that we could use the connector iterator macros in there too, but
that's for the future.

Port of radeon commit:
drm/radeon: Sprinkle drm_modeset_lock_all to appease locking checks
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In

commit 7a3f3d66
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jul 9 23:44:28 2015 +0200

    drm: Check locking in drm_for_each_connector

I added locking checks to drm_for_each_connector but failed that
through drm_helper_connector_dpms -> drm_helper_choose_encoder_dpms
it's used in a few more places in the radeon resume/suspend code.

Fix them up.

Note that we could use the connector iterator macros in there too, but
that's for the future.
Reported-and-tested-by: NBorislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

we used to adopt wait_reg_mem to let CE wait before DE finish page
updating, but from Tonga+, CE doesn't support wait_reg_mem package so
this logic no longer works.

so here is another approach to do same thing:
Insert two of SWITCH_BUFFER at both front and end of vm_flush can
guarantee that CE not go further to process IB_const before vm_flush
done.

Insert two of SWITCH_BUFFER also works on CI, so remove legency method
to sync CE and ME

v2:
Insert double SWITCH_BUFFER at front of vm flush as well.
Signed-off-by: Nmonk.liu <monk.liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

args->size is a u64.  arg->pitch and args->height are u32.  The
multiplication will overflow instead of using the high 32 bits as
intended.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is no limit on args->data.data_size_bytes so we could read beyond
the end of the args->data.data[] array.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reported-by: NIlja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The "alloc_size" calculation can overflow leading to memory corruption.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reported-by: NIlja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The amdgpu_cs_parser_init() function doesn't clean up after itself but
instead the caller uses a free everything function amdgpu_cs_parser_fini()
on failure.  This style of error handling is often buggy.  In this
example, we call "drm_free_large(parser->chunks[i].kdata);" when it is
an unintialized pointer or when "parser->chunks" is NULL.

I fixed this bug by adding unwind code so that it frees everything that
it allocates.

I also mode some other very minor changes:
1) Renamed "r" to "ret".
2) Moved the chunk_array allocation to the start of the function.
3) Removed some initializers which are no longer needed.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reported-by: NIlja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The value was much too low, which could cause the userspace visible
vblank counter to move backwards when the hardware counter wrapped
around.

Ported from radeon commit:
b0b9bb4dReviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The patch was generated using fixed coccinelle semantic patch
scripts/coccinelle/api/memdup.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2014320Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>