- 25 1月, 2008 40 次提交
-
-
由 Steven Whitehouse 提交于
This patch fixes a couple of problems which affected the execution of files on GFS2. The first is that there was a corner case where inodes were not always uptodate at the point at which permissions checks were being carried out, this was resulting in refusal of execute permission, but only on the first lookup, subsequent requests worked correctly. The second was a problem relating to incorrect updating of file sizes which was introduced with the write_begin/end code for GFS2 a little while back. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Cc: Abhijith Das <adas@redhat.com>
-
由 Bob Peterson 提交于
Here is a patch for the latest upstream GFS2 code: The journal extent map needs to be initialized sooner than it currently is. Otherwise failed mount attempts (e.g. not enough journals, etc.) may panic trying to access the uninitialized list. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
To improve performance on NUMA, we use the VM's standard page migration for writeback and ordered pages. Probably we could also do the same for journaled data, but that would need a careful audit of the code, so will be the subject of a later patch. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The go_drop_th function is never called or referenced. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
A missing offset in the calculation. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This is a small correction to my previously posted patch1. It just changes a divide to a shift. It's faster and doesn't introduce odd dependencies on 32-bit compiles. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch eliminates the unneeded sd_statfs_mutex mutex but preserves the ordering as discussed. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch optimizes function gfs2_meta_read. Basically, gfs2_meta_wait was being called regardless of whether a disk read was requested. This just pulls that wait into the if that triggers the read. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
Function gfs2_block_map was often looking up the disk inode twice. This optimizes it so that only does it once. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch optimizes the function gfs2_glmutex_lock. The basic theory is: Why bother initializing a holder, setting up wait bits and then waiting on them, if you know the glock can be yours. So the holder stuff is placed inside the if checking if the glock is locked. This one needs careful scrutiny because changing anything to do with locking should strike terror into one's heart. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
I eliminated the passing of an unused parameter into gfs2_bitfit called rgd. This also changes the gfs2_bitfit code that searches for free (or used) blocks. Before, the code was trying to check for bytes that indicated 4 blocks in the undesired state. The problem is, it was spending more time trying to do this than it actually was saving. This version only optimizes the case where we're looking for free blocks, and it checks a machine word at a time. So on 32-bit machines, it will check 32-bits (16 blocks) and on 64-bit machines, it will check 64-bits (32 blocks) at a time. The compiler optimizes that quite well and we save some time, especially when running through full bitmaps (like the bitmaps allocated for the journals). There's probably a more elegant or optimized way to do this, but I haven't thought of it yet. I'm open to suggestions. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This just eliminates an unused variable from the quota code. Not likely to be a time saver. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch saves a little time when gfs2 writes to the journals by keeping a mapping between logical and physical blocks on disk. That's better than constantly looking up indirect pointers in buffers, when the journals are several levels of indirection (which they typically are). Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch is just a cleanup. Function gfs2_get_block() just calls function gfs2_block_map reversing the last two parameters. By reversing the parameters, gfs2_block_map() may be called directly and function gfs2_get_block may be eliminated altogether. Since this function is done for every block operation, this streamlines the code and makes it a little bit more efficient. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
The fl_owner is that of lockd when posix locks arrive from nfs clients, so it can't be used to distinguish between lock holders. Use fl_pid as owner instead; it's the pid of the process on the nfs client. Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Abhijith Das 提交于
A certain scenario in the rename code path triggers a kernel BUG() because it accidentally does recursive locking The first lock is requested to unlink an already existing inode (replacing a file) and the second lock is requested when the destination directory needs to alloc some space. It is rare that these two events happen during the same rename call, and even more rare that these two instances try to lock the same rgrp. It is, however, possible. https://bugzilla.redhat.com/show_bug.cgi?id=404711Signed-off-by: NAbhijith Das <adas@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Wendy Cheng 提交于
GFS2 supports two modes of locking - lock_nolock for single node filesystem and lock_dlm for cluster mode locking. The gfs2 lock methods are removed from file operation table for lock_nolock protocol. This would allow VFS to handle posix lock and flock logics just like other in-tree filesystems without duplication. Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Fabio M. Di Nitto 提交于
Signed-off-by: NFabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Fabio Massimo Di Nitto 提交于
Hi Steven, Steven Whitehouse wrote: > Hi, > > Now in the -nmw git tree. Thanks, > > Steve. > > On Wed, 2007-11-21 at 11:54 -0600, Ryan O'Hara wrote: this patch introduces a bunch of build warnings by leaving around struct inode *inode = &ip->i_inode; The patch in attachment cleans them up. Please apply. Signed-off-by: NFabio Massimo Di Nitto <fabbione@ubuntu.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Ryan O'Hara 提交于
Remove read/write permission() checks from xattr operations. VFS layer is already handling permission for xattrs via the xattr_permission() call, so there is no need for gfs2 to check permissions. Futhermore, using permission() for SELinux xattrs ops is incorrect. Signed-off-by: NRyan O'Hara <rohara@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Fabio Massimo Di Nitto 提交于
The issue is indeed UP vs SMP and it is totally random. spin_is_locked() is a bad assertion because there is no correct answer on UP. on UP spin_is_locked() has to return either one value or another, always. This means that in my setup I am lucky enough to trigger the issue and your you are lucky enough not to. the patch in attachment removes the bogus calls to BUG_ON and according to David (in CC and thanks for the long explanation on the problem) we can rely upon things like lockdep to find problem that might be trying to catch. Signed-off-by: NFabio M. Di Nitto <fabbione@ubuntu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
Print error with log_error() to be consistent with others. Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NFabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Fabio Massimo Di Nitto 提交于
The patch is a fix to abort mount if the mount.gfs* and possible umount.* are missing from /sbin. While we do what we can to guarantee that they are installed properly in userland (CVS HEAD), we want to make sure that mount still aborts properly. The only sign of missing helpers is that lock_dlm will receive no mount options at all. According to David the problem does not exist for lock_nolock as the helpers are not required. The patch has been tested for both gfs and gfs2 and it works as expected. The lack of mount.gfs* will generate an error that is propagated to mount: oot@node1:~# mount -t gfs2 /dev/nbd2 /mnt/ mount: wrong fs type, bad option, bad superblock on /dev/nbd2, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so [ 3513.303346] GFS2: fsid=: Trying to join cluster "lock_dlm", "gutsy:gfs2" [ 3513.304546] DLM/GFS2/GFS ERROR: (u)mount helpers are not installed properly! [ 3513.306290] GFS2: fsid=: can't mount proto=lock_dlm, table=gutsy:gfs2, hostdata= You might want to notice that it will also avoid mount to hang or fail silently or with strange errors that will require the cluster to reboot/restart before you can actually mount the filesystem again. Signed-off-by: NFabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
We only care about the content of the jindex in two cases, one is when we mount the fs and the other is when we need to recover another journal. In both cases we have to update the jindex anyway, so there is no point in updating it periodically between times, so this removes it to simplify gfs2_logd. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This means that we can mark gfs2_ail1_empty static and prepares the way for further changes. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This patch changes the counter which keeps track of the free blocks in the journal to an atomic_t in preparation for the following patch which will update the log reservation code. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The only reason for adding glocks to the journal was to keep track of which locks required a log flush prior to release. We add a flag to the glock to allow this check to be made in a simpler way. This reduces the size of a glock (by 12 bytes on i386, 24 on x86_64) and means that we can avoid extra work during the journal flush. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
Use wait_event_interruptible() in the lock_dlm thread instead of an open coded equivalent, and include a kthread_should_stop() check in the wait test so we don't miss a kthread_stop(). Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch changes the /sys/fs/gfs2/<s_id>/id file to give the device id "major:minor" rather than the s_id. That enables gfs2_tool to match devices properly (by id, not name) when locating the tuning files. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The HIF_MUTEX and HIF_PROMOTE flags were set on the glock holders depending upon which of the two waiters lists they were going to be queued upon. They were then tested when the holders were taken off the lists to ensure that the right type of holder was being dequeued. Since we are already using separate lists, there doesn't seem a lot of point having these flags as well, and since setting them and testing them is in the fast path for locking and unlocking glock, this patch removes them. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Previously we were doing (write data, wait for data, write metadata, wait for metadata). After this patch we so (write metadata, write data, wait for data, wait for metadata) which should be more efficient. Also I noticed that the drop_bh and xmote_bh functions were almost identical. In fact the only difference was a single test, and that test is such that in the drop_bh case, it would always evaluate to the correct result. As such we can use the xmote_bh functions in all the places where we were using the drop_bh function and remove the drop_bh functions. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This set of address space operations was missing a sync_page operation. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This call to reclaim glocks is not needed, and in particular we don't want it in the fast path for locking glocks. The limit was entirely arbitrary anyway and we can't expect users to adjust things like this, the remaining code will do the right thing on its own. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
These haven't been used for some time, remove them. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Something changed in the upstream kernel, and it needs this one-liner to allow ops_address.c to build. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This is an addendum to the new AOPs work which moves the point at which we take the page lock so that we don't get it until the last possible moment. This resolves a conflict between starting transactions and the page lock. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This patch resolves a lock ordering issue where we had been getting a transaction lock in the wrong order with respect to the page lock. By using writepages rather than just writepage, it is then possible to start a transaction before locking the page, and thus matching the locking order elsewhere in the code. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This patch splits gfs2_writepage into separate functions for each of the three cases: writeback, ordered and journalled. As a result it becomes a lot easier to see what each one is doing. The common code is moved into gfs2_writepage_common. This fixes a performance bug where we were doing more work than strictly required in the ordered write case. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-