After staring hard at sequences like

[   28.199013]  systemd-1       2..s. 26062228us : execlists_submission_tasklet: rcs0 cs-irq head=0 [0?], tail=1 [1?]
[   28.199095]  systemd-1       2..s. 26062229us : execlists_submission_tasklet: rcs0 csb[1]: status=0x00000018:0x00000000, active=0x1
[   28.199177]  systemd-1       2..s. 26062230us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.1, seqno=3, prio=-1024
[   28.199258]  systemd-1       2..s. 26062231us : execlists_submission_tasklet: rcs0 completed ctx=0
[   28.199340]  gem_eio-829     1..s1 26066853us : execlists_submission_tasklet: rcs0 in[0]:  ctx=1.1, seqno=1, prio=0
[   28.199421]   <idle>-0       2..s. 26066863us : execlists_submission_tasklet: rcs0 cs-irq head=1 [1?], tail=2 [2?]
[   28.199503]   <idle>-0       2..s. 26066865us : execlists_submission_tasklet: rcs0 csb[2]: status=0x00000001:0x00000000, active=0x1
[   28.199585]  gem_eio-829     1..s1 26067077us : execlists_submission_tasklet: rcs0 in[1]:  ctx=3.1, seqno=2, prio=0
[   28.199667]  gem_eio-829     1..s1 26067078us : execlists_submission_tasklet: rcs0 in[0]:  ctx=1.2, seqno=1, prio=0
[   28.199749]   <idle>-0       2..s. 26067084us : execlists_submission_tasklet: rcs0 cs-irq head=2 [2?], tail=3 [3?]
[   28.199830]   <idle>-0       2..s. 26067085us : execlists_submission_tasklet: rcs0 csb[3]: status=0x00008002:0x00000001, active=0x1
[   28.199912]   <idle>-0       2..s. 26067086us : execlists_submission_tasklet: rcs0 out[0]: ctx=1.2, seqno=1, prio=0
[   28.199994]  gem_eio-829     2..s. 28246084us : execlists_submission_tasklet: rcs0 cs-irq head=3 [3?], tail=4 [4?]
[   28.200096]  gem_eio-829     2..s. 28246088us : execlists_submission_tasklet: rcs0 csb[4]: status=0x00000014:0x00000001, active=0x5
[   28.200178]  gem_eio-829     2..s. 28246089us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.0, seqno=0, prio=0
[   28.200260]  gem_eio-829     2..s. 28246127us : execlists_submission_tasklet: execlists_submission_tasklet:886 GEM_BUG_ON(buf[2 * head + 1] != port->context_id)

the conclusion is that the only place where the ports are reset to zero,
is from engine->cancel_requests called during i915_gem_set_wedged().

The race is horrible as it results from calling set-wedged on active HW
(the GPU reset failed) and as such we need to be careful as the HW state
changes beneath us. Fortunately, it's the same scary conditions as
affect normal reset, so we can reuse the same machinery to disable state
tracking as we clobber it.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104945Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Fixes: af7a8ffa ("drm/i915: Use rcu instead of stop_machine in set_wedged")
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302113324.23189-2-chris@chris-wilson.co.uk

We have two instances of the code to fill out the header for the aux
message. Pull it into a small helper.

v2: Rebase due to txbuf[] changes

Cc: Sean Paul <seanpaul@chromium.org>
Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222212802.4826-1-ville.syrjala@linux.intel.comReviewed-by: NRamalingam C <ramalingam.c@intel.com>

Let's try to keep the details on the AKSV stuff concentrated
in one place. So move the control bit and +5 data size handling
there.

v2: Increase txbuf[] to include the payload which intel_dp_aux_xfer()
    will still load into the registers even though the hardware
    will ignore it

Cc: Sean Paul <seanpaul@chromium.org>
Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222212732.4665-1-ville.syrjala@linux.intel.comReviewed-by: NRamalingam C <ramalingam.c@intel.com>

Rename intel_dp_aux_ch() to intel_dp_aux_xfer() to better convey
what it actually does.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222181036.15251-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #irc

Enabling FBC on a plane having a Y-offset that isn't divisible by 4 may
cause pipe FIFO underruns and flickers, so disable FBC on such a config.

I tried the followings to work around the issue:
- enable each HW work around in ILK_DPFC_CHICKEN
- disable each compression algorithm in ILK_DPFC_CONTROL
- disable low-power watermarks
None of the above got rid of the problem. I haven't found this issue in
the Bspec/WA database either.

Besides the igt testcase below (yet to be merged) an easy way to
reproduce the issue is to enable a plane with FBC and a plane Y-offset
not aligned to 4 and then just enable/disable FBC in a loop, keeping the
plane enabled.

I could trigger the problem on BXT/GLK/SKL/CNL, so assume for now that it's
only present on GEN9 and GEN10.

v2: (Ville)
- Run the test/apply the WA on CNL as well.
- Use IS_GEN() instead of INTEL_GEN().
- Fix spelling.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Testcase: igt/kms_plane/plane-clipping-pipe-A-planes
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301134457.13974-1-imre.deak@intel.com

In decimal its just a weird big number, while in hex can actually log
which engines were requested to be wedged.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228171844.20006-1-tvrtko.ursulin@linux.intel.com

GuC load function is named intel_guc_fw_upload() and HuC load function is
named intel_huc_init_hw(). Make them consistent intel_*_fw_upload. Also
move HuC fw loading functions and declarations to separate files
intel_huc_fw.c|h like GuC.

While at this, do below changes
1. Update kernel-doc comment for intel_*_fw_upload() functions
2. s/huc_ucode_xfer/huc_fw_xfer
3. Introduce intel_huc_fw_init_early()

v2: Changed patch to update HuC functions instead of changing
    guc_fw_upload and update file structure. (Michal Wajdeczko)

v3: Added SPDX License identifier to huc_fw.c|h. (Michal Wajdeczko)
Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1519922745-25441-1-git-send-email-sagar.a.kamble@intel.com

Moving the check upwards will mean we we no longer have to add planes
and connectors manually, because everything is handled correctly by
drm_atomic_helper_check_modeset() as intended.

[applied with whitespace changes to make sparse happy]
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221092808.30060-1-maarten.lankhorst@linux.intel.com

Now that we can pass arbitrary commands into the base __wait_for()
macro, we can reimplement the open-coded wait-for inside
i915_gem_idle_work_handler() using the new macro. This means that instead
of using ktime, we now use jiffies, and benefit from the exponential sleep
backoff that allows a fast response if the HW settles quickly.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301103338.5380-1-chris@chris-wilson.co.uk

We're seeing on CI that some contexts don't have the programmed OA
period timer that directs the OA unit on how often to write reports.

The issue is that we're not holding the drm lock from when we edit the
context images down to when we set the exclusive_stream variable. This
leaves a window for the deferred context allocation to call
i915_oa_init_reg_state() that will not program the expected OA timer
value, because we haven't set the exclusive_stream yet.

v2: Drop need_lock from gen8_configure_all_contexts() (Matt)
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Fixes: 701f8231 ("drm/i915/perf: prune OA configs")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102254
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103715
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103755
Link: https://patchwork.freedesktop.org/patch/msgid/20180301110613.1737-1-lionel.g.landwerlin@intel.com
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.14+

v2: Rebase.

v3:
  * Remove DPF, it has been removed from SKL+.
  * Fix -internal rebase wrt. execlists interrupt handling.

v4: Rebase.

v5:
  * Updated for POR changes. (Daniele Ceraolo Spurio)
  * Merged with irq handling fixes by Daniele Ceraolo Spurio:
      * Simplify the code by using gen8_cs_irq_handler.
      * Fix interrupt handling for the upstream kernel.

v6:
  * Remove early bringup debug messages (Tvrtko)
  * Add NB about arbitrary spin wait timeout (Tvrtko)

v7 (from Paulo):
  * Don't try to write RO bits to registers.
  * Don't check for PCH types that don't exist. PCH interrupts are not
    here yet.

v9:
  * squashed in selector and shared register handling (Daniele)
  * skip writing of irq if data is not valid (Daniele)
  * use time_after32 (Chris)
  * use I915_MAX_VCS and I915_MAX_VECS (Daniele)
  * remove fake pm interrupt handling for later patch (Mika)

v10:
  * Direct processing of banks. clear banks early (Chris)
  * remove poll on valid bit, only clear valid bit (Mika)
  * use raw accessors, better naming (Chris)

v11:
  * adapt to raw_reg_[read|write]
  * bring back polling the valid bit (Daniele)

v12:
  * continue if unset intr_dw (Daniele)
  * comment the usage of gen8_de_irq_handler bits (Daniele)

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228101153.7224-2-mika.kuoppala@linux.intel.com

Gen11 will add more VCS and VECS rings so prepare the
infrastructure to support that.

Bspec: 7021

v2: Rebase.
v3: Rebase.
v4: Rebase.
v5: Rebase.
v6:
  - Update for POR changes. (Daniele Ceraolo Spurio)
  - Add provisional guc engine ids - to be checked and confirmed.
v7:
  - Rebased.
  - Added the new ring masks.
  - Added the new HW ids.
v8:
  - Introduce I915_MAX_VCS/VECS to avoid magic numbers (Michal)

v9: increase MAX_ENGINE_INSTANCE to 3

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228101153.7224-1-mika.kuoppala@linux.intel.com

To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

dp_rates[] array is a superset of all the link rates supported
by sink devices. DP 1.3 specification adds HBR3 (8.1Gbps) link rate
to the set of link rates supported by sink. This patch adds this rate
to dp_rates[] array that gets used to populate the sink_rates[]
array limited by max rate obtained from DP_MAX_LINK_RATE DPCD register.

v2:
* Rebased on top of Jani's localized rates patch

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1519857110-26916-1-git-send-email-manasi.d.navare@intel.com

Driver Changes:

- Lift alpha_support protection from Cannonlake (Rodrigo)
	* Meaning the driver should mostly work for the hardware we had
	  at our disposal when testing
	* Used to be preliminary_hw_support
- Add missing Cannonlake PCI device ID of 0x5A4C (Rodrigo)
- Cannonlake port register fix (Mahesh)

- Fix Dell Venue 8 Pro black screen after modeset (Hans)
- Fix for always returning zero out-fence from execbuf (Daniele)
- Fix HDMI audio when no no relevant video output is active (Jani)
- Fix memleak of VBT data on driver_unload (Hans)

- Fix for KASAN found locking issue (Maarten)
- RCU barrier consolidation to improve igt/gem_sync/idle (Chris)
- Optimizations to IRQ handlers (Chris)
- vblank tracking improvements (64-bit resolution, PM) (Dhinakaran)
- Pipe select bit corrections (Ville)
- Reduce runtime computed device_info fields (Chris)
- Tune down some WARN_ONs to GEM_BUG_ON now that CI has good coverage (Chris)
- A bunch of kerneldoc warning fixes (Chris)

* tag 'drm-intel-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-intel: (113 commits)
  drm/i915: Update DRIVER_DATE to 20180221
  drm/i915/fbc: Use PLANE_HAS_FENCE to determine if the plane is fenced
  drm/i915/fbdev: Use the PLANE_HAS_FENCE flags from the time of pinning
  drm/i915: Move the policy for placement of the GGTT vma into the caller
  drm/i915: Also check view->type for a normal GGTT view
  drm/i915: Drop WaDoubleCursorLP3Latency:ivb
  drm/i915: Set the primary plane pipe select bits on gen4
  drm/i915: Don't set cursor pipe select bits on g4x+
  drm/i915: Assert that we don't overflow frontbuffer tracking bits
  drm/i915: Track number of pending freed objects
  drm/i915/: Initialise trans_min for skl_compute_transition_wm()
  drm/i915: Clear the in-use marker on execbuf failure
  drm/i915: Prune gen8_gt_irq_handler
  drm/i915: Track GT interrupt handling using the master iir
  drm/i915: Remove WARN_ONCE for failing to pm_runtime_if_in_use
  drm: intel_dpio_phy: fix kernel-doc comments at nested struct
  drm/i915: Release connector iterator on a digital port conflict.
  drm/i915/execlists: Remove too early assert
  drm/i915: Assert that we always complete a submission to guc/execlists
  drm: move read_domains and write_domain into i915
  ...

drm/tilcdc changes to v4.17

* tag 'tilcdc-4.17' of https://github.com/jsarha/linux:
  drm/tilcdc: tilcdc_panel: Rename device from "panel" to "tilcdc-panel"
  drm/tilcdc: Add support for drm panels
  drm/tilcdc: panel: Use common error handling code in of_get_panel_info()
  drm/tilcdc: Delete an error message for a failed memory allocation in seven functions

Localize link rate arrays by moving them to the functions where they're
used. Further clarify the distinction between source and sink
capabilities. Split pre and post Haswell arrays, and get rid of the
array size arithmetics. Use a direct rate value in the paranoia case of
no common rates find.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227105911.4485-1-jani.nikula@intel.com

While it seems totally unlikely that any system would mix a cpu/north
aux channel with a pch/south port (or vice versa) we should still
consult intel_dp->aux_ch rather than encoder->port when figuring out
which clock is actually used by the aux ch.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222181036.15251-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #irc

Although we protect the request itself, we don't lock inside
intel_engine_dump() and so the request maybe retired as we peek into it.
One consequence is that the request->ctx may be freed before we
dereference it, leading to a use-after-free. Replace the hw_id we are
peeking from inside request->ctx with the request->fence.context, with
which we can still track from which context the request originated
(although to tie to HW reports requires a little more legwork, but is
good enough to follow the GEM traces).

[52640.729670] general protection fault: 0000 [#2] SMP
[52640.729694] Dumping ftrace buffer:
[52640.729701]    (ftrace buffer empty)
[52640.729705] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_\
temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul snd_hda_intel snd_hda_codec snd_hwdep gha\
sh_clmulni_intel snd_hda_core snd_pcm mei_me mei i915 r8169 mii prime_numbers i2c_hid
[52640.729748] CPU: 2 PID: 4335 Comm: gem_exec_schedu Tainted: G     UD W        4.16.0-rc3+ #7
[52640.729759] Hardware name: Acer Aspire E5-575G/Ironman_SK  , BIOS V1.12 08/02/2016
[52640.729803] RIP: 0010:print_request+0x2b/0xb0 [i915]
[52640.729811] RSP: 0018:ffffc90001453c18 EFLAGS: 00010206
[52640.729820] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8801e0292d40 RCX: 0000000000000006
[52640.729829] RDX: ffffc90001453c60 RSI: ffff8801e0292d40 RDI: 0000000000000003
[52640.729838] RBP: ffffc90001453d80 R08: 0000000000000000 R09: 0000000000000001
[52640.729847] R10: ffffc90001453bd0 R11: ffffc90001453c73 R12: ffffc90001453c60
[52640.729856] R13: ffffc90001453d80 R14: ffff8801d5a683c8 R15: ffff8801e0292d40
[52640.729866] FS:  00007f1ee50548c0(0000) GS:ffff8801e8200000(0000) knlGS:0000000000000000
[52640.729876] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[52640.729884] CR2: 00007f1ee5077000 CR3: 00000001d9411004 CR4: 00000000003606e0
[52640.729893] Call Trace:
[52640.729922]  intel_engine_print_registers+0x623/0x890 [i915]
[52640.729948]  intel_engine_dump+0x4a3/0x590 [i915]
[52640.729957]  ? seq_printf+0x3a/0x50
[52640.729977]  i915_engine_info+0xb8/0xe0 [i915]
[52640.729984]  ? drm_mode_gamma_get_ioctl+0xf0/0xf0
[52640.729990]  seq_read+0xd5/0x410
[52640.729997]  full_proxy_read+0x4b/0x70
[52640.730004]  __vfs_read+0x1e/0x120
[52640.730009]  ? do_sys_open+0x134/0x220
[52640.730015]  ? kmem_cache_free+0x174/0x2b0
[52640.730021]  vfs_read+0xa1/0x150
[52640.730026]  SyS_read+0x40/0xa0
[52640.730032]  do_syscall_64+0x65/0x1a0
[52640.730038]  entry_SYSCALL_64_after_hwframe+0x42/0xb7
Reported-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228094732.28462-1-chris@chris-wilson.co.uk

On pre-HSW we have dedicated hardware for the RGB limited range
handling, and so we don't want to compress with the CSC matrix.

Toss in a FIXME about gamma LUT vs. limited range using the CSC.

Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-4-ville.syrjala@linux.intel.comReviewed-by: NUma Shankar <uma.shankar@intel.com>

The pipe CSC was introduced by ILK, so change everything related
to use ilk_ as the prefix.

Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-3-ville.syrjala@linux.intel.comReviewed-by: NUma Shankar <uma.shankar@intel.com>

If we don't have to frob with the user provided ctm matrix there's
no point in copying it over. Just point at the user ctm directly.

Also the matrix gets fully populated by ctm_mult_by_limited() so
no need to zero initialize it.

Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-2-ville.syrjala@linux.intel.comReviewed-by: NUma Shankar <uma.shankar@intel.com>

To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Rename the bundled tilcdc_panel driver from just "panel" to
"tilcdc-panel" to avoid noisy error messages from the driver trying to
probe all device nodes named "panel".
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add support for drm panels to tilcdc. Adding the support on top of the
existing bridge support needs only couple of lines of code when using
using the drm panel bridge helpers.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Currently, BXT_PP is hardcoded with value '0'.
It practically disabled eDP backlight on MRB (BXT) platform.

This patch will tell which BXT_PP registers (there are two set of
PP_CONTROL in the spec) to be used as defined in VBT (Video Bios Timing
table) and this will enabled eDP backlight controller on MRB (BXT)
platform.

v2:
 - Remove unnecessary information in commit message.
 - Assign vbt.backlight.controller to a backlight_controller variable and
   return the variable value.
v3:
 - Rebased to latest code base.
 - updated commit title.
Signed-off-by: NMustamin B Mustaffa <mustamin.b.mustaffa@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227030734.37901-1-mustamin.b.mustaffa@intel.com

As the ftrace log is overflowing the pstore capture, we lose the last
gasps from dmesg which includes the GEM_BUG_ON function:line and condition
that failed. Vital information for tracking down the bug, so append it to
the frace log as well.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227211816.5546-1-chris@chris-wilson.co.uk

Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Omit an extra message for a memory allocation failure in these functions.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NJyri Sarha <jsarha@ti.com>

- Expose thermal thresholds through hwmon properly
- Rework HDP flushing for rings and CPU
- Improved dual-link DVI handling in DC
- Lots of code clean up
- Additional DC clean up
- Allow scanout from system memory on CZ/BR/ST
- Improved PASID/VM integration
- Expose GPU voltage and power via hwmon
- Initial wattman-like support
- Initial power profiles for use-case optimized performance
- Rework GPUVM TLB flushing
- Rework IP offset handling for SOC15 asics
- Add CRC support in DC
- Fixes for mmhub powergating
- Initial regamma/degamma/CTM support in DC
- ttm cleanups and simplifications
- ttm OOM avoidance fixes

* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (348 commits)
  Revert "drm/radeon/pm: autoswitch power state when in balanced mode"
  drm/radeon: use drm_gem_private_object_init
  drm/amdgpu: use drm_gem_private_object_init
  drm/amdgpu: mitigate workaround for i915
  drm/amdgpu: implement amdgpu_gem_map_(attach/detach)
  drm/amdgpu/powerplay/smu7: drop refresh rate checks for mclk switching
  drm/amdgpu/cgs: add refresh rate checking to non-DC display code
  drm/amd/powerplay/smu7: allow mclk switching with no displays
  drm/amd/powerplay/vega10: allow mclk switching with no displays
  drm/amd/powerplay: use PP_CAP macro for disable_mclk_switching_for_frame_lock
  drm/amd/powerplay: remove unused headers
  drm/amdgpu_gem: fix error handling path in amdgpu_gem_va_update_vm
  drm/amdgpu: update the PASID mapping only on demand
  drm/amdgpu: separate PASID mapping from VM flush v2
  drm/amd/display: Fix increment when sampling OTF in DCE
  drm/amd/display: De PQ implementation
  drm/amd/display: Remove unused dm_pp_ interfaces
  drm/amd/display: Add logging for aux DPCD access
  drm/amd/display: Set vsc pack revision when DPCD revision is >= 1.2
  drm/amd/display: provide an interface to query firmware version
  ...

Old Wa added now forever on CNL all steppings.

With CPU P states enabled along with RC6, dispatcher
hangs can happen.

Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NRadhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222200535.9290-1-rodrigo.vivi@intel.com

We can still use PSR1 when PSR2 conditions are not met.

So, let's split the check in a way that we make sure has_psr
gets set independently of PSR2 criteria.

v2: Duh! Handle proper return to avoid breaking PSR2.
v3: (DK):
	- better name for psr2 conditions check function
	- Don't remove FIXME block and psr2.support check.
	- Add a debug message to show us what PSR or PSR2 is
	  getting enabled now we have ways to enabled PSR on
	  PSR2 panels.
	- s/PSR2 disabled/PSR2 not enabled

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227212913.14083-2-rodrigo.vivi@intel.com

According to spec:
"PSR2 is supported for pipe active sizes up to
3640 pixels wide and 2304 lines tall."

BSpec: 7713

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227212913.14083-1-rodrigo.vivi@intel.com

eDP spec says - "If PSR/PSR2 is supported, the SET_POWER_CAPABLE bit in the
EDP_GENERAL_CAPABILITY_1 register (DPCD Address 00701h, bit d7) must be set
to 1."

Reject PSR on panels without this cap bit set as such panels cannot be
controlled via SET_POWER & SET_DP_PWR_VOLTAGE register and the DP source
needs to be able to do that for PSR.

Thanks to Nathan for debugging this.

Panel cap checks like this can be done just once, let's fix this
when PSR dpcd init movement lands.

Cc: Nathan D Ciobanu <nathan.d.ciobanu@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Tested-by: NNathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227032723.15474-1-dhinakaran.pandiyan@intel.com

No functional change.
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223221520.18464-6-dhinakaran.pandiyan@intel.com

The core already takes care of the delay before retrying. The delay now
changes to (500, 600)us instead of (500 + 1000, 600 + 1500)us.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223221520.18464-5-dhinakaran.pandiyan@intel.com

The cap check should be specifically for bit 0 instead of any bit.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 474d1ec4 ("drm/i915/skl: Enabling PSR2 SU with frame sync")
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223221520.18464-4-dhinakaran.pandiyan@intel.com

intel_edp_init_dpcd() is cluttered with PSR specific DPCD checks and
intel_dp.c is huge.

No functional change intended.

v2: Rebased.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223221520.18464-3-dhinakaran.pandiyan@intel.com

Frontbuffer flush and invalidate call psr, fbc and drrs functions that use
mutexes but they can be called in atomic contexts in the fbdev path. The
point where the spinlocks are acquired is up in the call stack that is not
entirely easy to spot, so annotate with might_sleep().

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223221520.18464-2-dhinakaran.pandiyan@intel.com

PSR on CNL requires AUX IO wells to be kept on and the existing AUX domain
for AUX-A enables DC_OFF well too. This is not required, so add a new
AUX_IO_A domain for AUX-A to allow DC states to remain enabled. Other AUX
channels re-use the existing AUX domains.

v4: Reword comment (Rodrigo and Ville)
    Rename _get and _put functions to include aux_io substring(Rodrigo)
    Remove unnecessary diff that got included.
v3: Extract aux domain selection into a function (Ville)
v2: Add AUX IO domain only for AUX-A
    Rebased on top of Ville's AUX series.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223221520.18464-1-dhinakaran.pandiyan@intel.com