Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com>

Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com>

Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com>

The LP872x regulator is used in the LG Optimus Black codename sniper to supply
the external mmc card.
Signed-off-by: NPaul Kocialkowski <contact@paulk.fr>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Enable configuration options useful for Vybrid:
- NFC NAND driver
- USB dual-role controller (and Chipidea Gadget support)
- Built-in EDMA DMA driver (to be available at LPUART probe)
- Vybrid ADC driver
- IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid)
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Signed-off-by: NLars Persson <larper@axis.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable the BCM2835/BCM2836 options required to boot Raspberry Pi.
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Olof Johansson <olof@lixom.net>
Tested-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

The A10 audio codec driver supports the on-chip audio codec found on
Allwinner A10, A10s, A13, A20 SoCs.

Build it as a module, since it is not critical.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Allwinner SoCs typically have a Mentor Graphics Inventra MUSB high speed
dual role controller for USB OTG.

Now that the issue with MUSB and USB gadget registration order has been
resolved, we can enable this driver in dual role mode.

This patch only enables the driver core and Allwinner platform support.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The driver has been removed so the Kconfig symbol is not valid anymore.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>

The watchdog timer on the SoCFPGA platform is the Synopsys Designware watchdog.
Enable CONFIG_DW_WATCHDOG for the driver to get built.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This is used by Renesas R-Car SoCs.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

As the rockchip SPDIF driver landed for 4.4 and the required clock
patches to make it work properly are scheduled for the 4.5 merge window
it seems time to support for audio device found on rockchip boards in
the defconfig as well.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

To make multi_v7_defconfig really "multi", let's add virtio drivers
to allow booting a default kernel as a KVM/QEMU guest.
MACH_VIRT is already defined, so we just add VIRTIO_BLK, VIRTIO_NET
and VIRTIO_CONSOLE to actually make this kernel useful in a guest.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Commit 69fb4dca ("power: Add an axp20x-usb-power driver") introduced a
new driver for the USB power supply used on various Allwinner based SBCs.
However, the driver was not added to multi_v7_defconfig which breaks USB
support for some boards (e.g. LeMaker BananaPi) as the kernel will now
turn off the USB power supply during boot by default if the driver isn't
present. (This was not the case in linux 4.3 or lower where the USB power
was always left on.)

Hence, add the driver to multi_v7_defconfig in order to keep USB support
working on those boards that require it.
Signed-off-by: NTimo Sigurdsson <public_timo.s@silentcreek.de>
Tested-by: NTimo Sigurdsson <public_timo.s@silentcreek.de>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

For Odroid XU3-family enable the:
 - PWM fan (to control the CPU fan using thermal subsystem),
 - TI INA231 sensors (provide power measurements of big.LITTLE cores,
   DRAM and GPU),
 - Samsung sound (for Odroid XU3 and Snow as well).
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The rk808 supplies two clock outputs with one going back into the soc as
32kHz supply, supplying some core soc clocks with it. The system can boot
without it being present, but it is needed for example as source clock
for the thermal driver.
Signed-off-by: NHeiko Stuebner <heiko.stuebner@collabora.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This enables the newly added hardware crypto module
found for example on the rk3288.
Signed-off-by: NHeiko Stuebner <heiko.stuebner@collabora.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The io-domain driver is necessary to notify the soc about voltages changes
happening on supplying regulators. Probably the most important user right
now is the mmc tuning code, where the soc needs to get notified when the
voltage is dropped to the 1.8V point.

As this option is necessary to sucessfully tune UHS cards etc, it should
get built in.
Signed-off-by: NHeiko Stuebner <heiko.stuebner@collabora.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

ABB and PBIAS are internal LDO control regulators that are needed for
maintaining proper functionality of OMAP architecture SoCs. Enable the
same. PBIAS is already enabled, so just enable ABB regulator as well.
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable PMIC for AM437x platforms such as AM437x-sk similar to commit
a186cf10 ("ARM: omap2plus_defconfig: enable TPS65218 configs").
This allows multi_v7_defconfig to boot up on AM437x-sk platform.
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable TPS65217 regulator to have rootfs in MMC for Beagle Bone's.
Suggested-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NAfzal Mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

In order to meet high performance an low power requirement for Rockchip
enable the power domain support. The patch also fixes a drm/kms issue,
driver deferring untils power-domains are available)
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This patch enables some drivers for LS1021A, such as
GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM.
QorIQ Clock Framework and Ramdisk support is also enabled.
Signed-off-by: NAlison Wang <alison.wang@freescale.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Enabling the frame buffer device on r8a7740/armadillo800eva requires the
board staging code.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable all missing support, extracted from the various Renesas ARM DTSes
using linux-config-from-dt.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The Renesas R-Car (Gen1) USB PHY driver (which is being removed) does
not support DT, and is thus useless in a generic ARM multi-platform
kernel.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The Honami device does not boot due to the lack of pinctrl support
compiled in with the multi_v7_defconfig. This patch correct this and
enables coincell, sdhci, smsm, smp2p and wcnss_ctrl as well, all found
on a variety of Qualcomm boards.
Reported-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@sonymobile.com>
Tested-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

This patch enables the QCOM SPMI and PMIC related drivers that are now
required to boot some supported devices.
Signed-off-by: NAndy Gross <agross@codeaurora.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

After all preparation work is done, we can finally move the Kconfig
option for s3c64xx into ARCH_MULTIPLATFORM. This implies allowing
SAMSUNG_ATAGS for multiplatform again, but now disallowing the
ADC driver below it, as that still has dependencies on header files.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Commit 3d0b16a6 ("nvmem: sunxi: Move the SID driver to the nvmem
framework") moved the the sunxi SID driver to a new framework, but left
multi_v7_defconfig with the deprecated config symbol EEPROM_SUNXI_SID
instead of the new symbol NVMEM_SUNXI_SID. Hence, re-enable the driver
in multi_v7_defconfig.
Signed-off-by: NTimo Sigurdsson <public_timo.s@silentcreek.de>
Acked-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

axp20x support has been split into 2 parts, I2C and RSB interface
variants.

Update the MFD_AXP20X symbol for I2C support. Also enable SUNXI_RSB
MFD_AXP20X_RSB to support RSB variants. Build these drivers as
modules.

Keep MFD_AXP20X enabled for now, to ease migration for automated
boot farms while the patches are being merged. This should be
removed in the next release.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Since the multi_v7_defconfig is used to build an image for different
platforms, the options should be enabled as module whenever possible.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>

Enable support for:
1. Haptic motor driver on Trats2 board (Maxim 77693) and Note 4 (Maxim
   77843);
2. LED driver on Trats2 board (Maxim 77693).
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>

Enable support for Maxim 8997 Multi Function Device present on Trats and
Origen boards by toggling on drivers: main MFD, charger, haptic motor,
regulator, LED and RTC.

This allows to test and usage of these boards with multi_v7 config.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>

The purpose of this patch is to start the process of replacing both
ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI with ARCH_RENESAS.

RENESAS seems to be a more appropriate name than SHMOBILE for the majority
of Renesas 32-bit ARM based SoCs. The name is conveniently also (newer)
ARM64 based SoCs.

This patches only addresses 32-bit ARM based SoCs.  Proposed support for
the ARM64 based r8a7795 SoC already uses ARCH_RENESAS which selects
ARCH_SHMOBILE.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

These two drivers were merged into the I2C sub-system by
commit dd6fd4a3 ("i2c: uniphier: add UniPhier FIFO-less I2C driver")
and commit 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C
driver").

Enable them from arch/arm/configs/multi_v7_defconfig.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Odroid XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over
USB 3.0.
Signed-off-by: NAnand Moon <linux.amoon@gmail.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards,
so enable DWC2 driver as well as the most common USB Ethernet gadget.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

Some drivers used on a Marvell Berlin kernel were missing from
multi_v7_defconfig. This series add them:

  * The pxa168 Ethernet driver is added as a loadable module.
  * The Berlin ADC driver is added as a loadable module.
  * Both the Berlin USB PHY and SATA PHY drivers are added,
    built-in, as they are required for the already available USB
    and SATA functionalities in multi_v7_defconfig.
Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>