- 05 6月, 2009 34 次提交
-
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Antonio Ospite 提交于
Setup gpio-keys for EzX phones Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Acked-by: NDaniel Ribeiro <drwyrm@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Dmitry Eremin-Solenikov 提交于
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Jonathan Cameron 提交于
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Jonathan Cameron 提交于
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Jonathan Cameron 提交于
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Dmitry Eremin-Solenikov 提交于
Add a call to pxa_set_ac97_info() to enable the audio support. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Dmitry Eremin-Solenikov 提交于
csb726 used obsolete and not working out-of-tree driver smc911x. Switch it to use new smsc911x driver. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Philipp Zabel 提交于
I'm not going to maintain separate defconfigs for magician and hx4700. This should probably be renamed to htcpxa_defconfig. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Philipp Zabel 提交于
This includes - IrDA (pxafixp_ir), - Buttons (gpio-keys), - ASIC3 IRQ/GPIOs (asic3), - EGPIOs (htc-egpio), - ATI Imageon w3220 framebuffer (w100fb), - Backlight (pwm-backlight), - StrataFlash (physmap), - Battery monitor (ds1wm,w1_ds2760,ds2760_battery) - USB gadget support (pxa27x_udc,gpio_vbus). - bq24022 battery charger (pda_power,bq24022) - TSC2046 touchscreen (ads7846) Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Philipp Zabel 提交于
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Philipp Zabel 提交于
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Robert Jarzmik 提交于
Add voltage regulation capability to pxa2xx cpufreq driver. The cpufreq will ask for a "vcc_core" regulator to the regulator framework. If a regulator is found at probe time, it will be used with values specified in PXA270 Electrical, Mechanical, and Thermal Specifications. If not, it will be assumed for now that frequency change will work without voltage control. This assumes that the IPL/SPL installs sane values to an existing voltage regulator (ie. voltage high enough to support the full range). Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Jürgen Schindele 提交于
Signed-off-by: NJürgen Schindele <linux@schindele.name> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Mike Rapoport 提交于
PXA processors have several low-power modes. Currently kernel supports only one of these modes for PM_SUSPEND_MEM. This patch adds ability to set desired suspend mode for PXA27x based machines. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Reviewed-by: NRussell King <linux@arm.linux.org.uk> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Robert Jarzmik 提交于
As reported by Aric Blumer, the pxa27x_udc driver does work with pxa3xx devices. Add support into device files. Reported-by: NAric Blumer <aric@sdgsystems.com> Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NMatt Reimer <mattjreimer@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Philipp Zabel 提交于
The default value is 16 IRQs. Zylonite needs 32, ASIC3 based boards need 70. My problem is still that due to the way IRQ_GPIO is hardcoded, ASIC3 based boards need 70 IRQs starting at IRQ_BOARD_START. If I define ASIC3 IRQs similar to LoCoMo or SA1111, things break as soon as something selects PXA_HAVE_BOARD_IRQS. Increasing the default number of board IRQs to 70 instead doesn't seem very nice. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
Signed-off-by: NMingwei Wang <mingwei.wang@marvell.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
The PXA_PWM config option is really redundant since the introduction of HAVE_PWM, replace that with HAVE_PWM to avoid confusion. Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
PWMs on PXA168/910 start at number 1 instead of 0, (i.e. PWM1/2/3/4 instead of PWM0/1/2/3 on PXA25x/PXA27x/PXA3xx). Allow this number to be specified in pwm_id_table. Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
Signed-off-by: NPaul Shen <paul.shen@marvell.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
Signed-off-by: NPaul Shen <paul.shen@marvell.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
- 02 6月, 2009 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This mostly adds back AppleTouch support and adds CONFIG_HIGHMEM by default. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 30 5月, 2009 2 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 David S. Miller 提交于
CSUM copy to/from user assembler was missing allocatable and executable attributes for .fixup Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 5月, 2009 3 次提交
-
-
由 Mel Gorman 提交于
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13302 On x86 and x86-64, it is possible that page tables are shared beween shared mappings backed by hugetlbfs. As part of this, page_table_shareable() checks a pair of vma->vm_flags and they must match if they are to be shared. All VMA flags are taken into account, including VM_LOCKED. The problem is that VM_LOCKED is cleared on fork(). When a process with a shared memory segment forks() to exec() a helper, there will be shared VMAs with different flags. The impact is that the shared segment is sometimes considered shareable and other times not, depending on what process is checking. What happens is that the segment page tables are being shared but the count is inaccurate depending on the ordering of events. As the page tables are freed with put_page(), bad pmd's are found when some of the children exit. The hugepage counters also get corrupted and the Total and Free count will no longer match even when all the hugepage-backed regions are freed. This requires a reboot of the machine to "fix". This patch addresses the problem by comparing all flags except VM_LOCKED when deciding if pagetables should be shared or not for hugetlbfs-backed mapping. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Acked-by: NHugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <starlight@binnacle.cx> Cc: Eric B Munson <ebmunson@us.ibm.com> Cc: Adam Litke <agl@us.ibm.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oskar Schirmer 提交于
The flat loader uses an architecture's flat_stack_align() to align the stack but assumes word-alignment is enough for the data sections. However, on the Xtensa S6000 we have registers up to 128bit width which can be used from userspace and therefor need userspace stack and data-section alignment of at least this size. This patch drops flat_stack_align() and uses the same alignment that is required for slab caches, ARCH_SLAB_MINALIGN, or wordsize if it's not defined by the architecture. It also fixes m32r which was obviously kaput, aligning an uninitialized stack entry instead of the stack pointer. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NOskar Schirmer <os@emlix.com> Cc: David Howells <dhowells@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <cooloney@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: NPaul Mundt <lethal@linux-sh.org> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: NJohannes Weiner <jw@emlix.com> Acked-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-