- 19 9月, 2012 1 次提交
-
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NTony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
-
- 18 9月, 2012 1 次提交
-
-
由 Matt Porter 提交于
Enable pinctrl dummy states for all OMAP platforms that don't populate DT. This allows drivers to be converted to pinctrl and not generate new warnings on platforms that do not provide pinctrl data. These platforms already have pinmuxes configured before the drivers probe. Signed-off-by: NMatt Porter <mporter@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 13 9月, 2012 2 次提交
-
-
由 Tony Lindgren 提交于
As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: NWim Van Sebroeck <wim@iguana.be> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
As the interrupts should only be defined in the platform_data, and eventually coming from device tree, there's no need to define them in header files. Let's remove the hardcoded references to irqs.h and fix up the includes so we don't rely on headers included in irqs.h. Note that we're defining OMAP_INTC_START as 0 to the interrupts. This will be needed when we enable SPARSE_IRQ. For some drivers we need to add #include <plat/cpu.h> for now until these drivers are fixed to remove cpu_is_omapxxxx() usage. While at it, sort som of the includes the standard way, and add the trailing commas where they are missing in the related data structures. Note that for drivers/staging/tidspbridge we just define things locally. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 11 9月, 2012 1 次提交
-
-
由 Igor Grinberg 提交于
plat/board.h file is now empty - remove it. Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il> Acked-by: NChris Ball <cjb@laptop.org> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 23 8月, 2012 1 次提交
-
-
由 Sudeep KarkadaNagesha 提交于
The arm_pmu_type enumeration was initially introduced to identify different PMU types in the system, the usual one being that on the CPU (ARM_PMU_DEVICE_CPU). With the removal of the PMU reservation code and the introduction of devicetree bindings for the CPU PMU, the enumeration is no longer required. This patch removes the enumeration and updates the various CPU PMU platform devices so that they no longer pass an .id field referring to identify the PMU type. Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Pawel Moll <pawel.moll@arm.com> Acked-by: NJon Hunter <jon-hunter@ti.com> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NJiandong Zheng <jdzheng@broadcom.com> Signed-off-by: NSudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com> [will: cosmetic edits and actual removal of the enum type] Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
- 09 7月, 2012 2 次提交
-
-
由 R Sricharan 提交于
The l3 interconnect ip is same for OMAP4 and OMAP5. So reuse the l3 error handler error code for OMAP5 as well. Also a few targets has been newly added for OMAP5. So updating the driver for that here. Signed-off-by: NR Sricharan <r.sricharan@ti.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
-
由 Xiao Jiang 提交于
If provided dt support, then skip add wdt platform device as usual. Signed-off-by: NXiao Jiang <jgq516@gmail.com> Reviewed-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 26 6月, 2012 1 次提交
-
-
由 Tony Lindgren 提交于
This allows us to pass dma request lines in platform data to MMC driver the same way as we already do for omap2430 and later. Also note that we need to only build this code if MMC_OMAP is selected, so change Makefile accordingly and place it near the MMC_OMAP_HS in the Makefile. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 22 6月, 2012 1 次提交
-
-
由 Paul Walmsley 提交于
Convert the old-style device registration code for HDQ1W to use omap_device. This will allow the driver to be converted to use PM runtime and to take advantage of the OMAP IP block management infrastructure (hwmod, PM, etc.). A side benefit of this conversion is that it also makes the HDQ device available on OMAP2420. The previous code only enabled it on 2430 and 3430. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: NeilBrown <neilb@suse.de> Tested-by: NNeilBrown <neilb@suse.de>
-
- 10 5月, 2012 2 次提交
-
-
由 Tony Lindgren 提交于
This allows us to pass dma request lines in platform data to MMC driver the same way as we already do for omap2430 and later. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Ricardo Neri 提交于
Add platform registration for the devices HDMI audio support. The omap-hdmi-audio-dai platform device is to be used by the ASoC HDMI CPU DAI driver. The omap-hdmi-audio platform device is to be used by the ASoC HDMI machine driver that links together the ASOC CPU DAI, ASoC plaform and ASoC codec drivers. Signed-off-by: NRicardo Neri <ricardo.neri@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 09 5月, 2012 2 次提交
-
-
由 Peter Ujfalusi 提交于
If dtb is provided the needed device will be created dynamically. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
If dtb is provided the needed device will be created dynamically. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 18 4月, 2012 1 次提交
-
-
由 Paul Walmsley 提交于
Resolve some warnings identified by cppcheck in arch/arm/mach-omap2: [arch/arm/mach-omap2/usb-tusb6010.c:129]: (style) Checking if unsigned variable 'tmp' is less than zero. [arch/arm/mach-omap2/prm_common.c:241]: (error) Possible null pointer dereference: irq_setup - otherwise it is redundant to check if irq_setup is null at line 247 [arch/arm/mach-omap2/pm34xx.c:790]: (style) Variable 'per_clkdm' is assigned a value that is never used [arch/arm/mach-omap2/pm34xx.c:790]: (style) Variable 'core_clkdm' is assigned a value that is never used [arch/arm/mach-omap2/pm24xx.c:185]: (style) Variable 'only_idle' is assigned a value that is never used [arch/arm/mach-omap2/mux.c:254]: (error) Possible null pointer dereference: mux [arch/arm/mach-omap2/mux.c:258]: (error) Possible null pointer dereference: mux [arch/arm/mach-omap2/gpmc-onenand.c:178]: (style) Variable 'tick_ns' is assigned a value that is never used [arch/arm/mach-omap2/gpio.c:56]: (error) Possible null pointer dereference: pdata - otherwise it is redundant to check if pdata is null at line 57 [arch/arm/mach-omap2/devices.c:45]: (style) Variable 'l' is assigned a value that is never used [arch/arm/mach-omap2/board-omap3evm.c:641] -> [arch/arm/mach-omap2/board-omap3evm.c:639]: (style) Found duplicate branches for if and else. [arch/arm/mach-omap2/am35xx-emac.c:95]: (style) Variable 'regval' is assigned a value that is never used [arch/arm/mach-omap2/devices.c:74]: (style) Variable 'l' is assigned a value that is never used [arch/arm/mach-omap2/pm34xx.c:277]: (style) Variable 'per_prev_state' is assigned a value that is never used [arch/arm/plat-omap/dmtimer.c:352]: (error) Possible null pointer dereference: timer - otherwise it is redundant to check if timer is null at line 354 [arch/arm/plat-omap/omap_device.c:478]: (style) Variable 'c' is assigned a value that is never used [arch/arm/plat-omap/usb.c:42]: (style) Variable 'status' is assigned a value that is never used [arch/arm/mach-omap1/clock.c:197]: (style) Variable 'dpll1_rate' is assigned a value that is never used [arch/arm/mach-omap1/lcd_dma.c:60]: (style) struct or union member 'lcd_dma_info::size' is never used [arch/arm/mach-omap1/pm.c:572]: (style) Variable 'entry' is assigned a value that is never used Some of them are pretty good catches, such as gpio.c:56 and usb-tusb6010.c:129. Thanks to Jarkko Nikula for some comments on the sscanf() warnings. It seems that the kernel sscanf() ignores the field width anyway for the %d format, so those changes have been dropped from this second version. Thanks to Daniel Marjamäki <daniel.marjamaki@gmail.com> for pointing out that a variable was unnecessarily marked static in the board-omap3evm.c change. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Charulatha Varadarajan <charu@ti.com> Cc: Daniel Marjamäki <daniel.marjamaki@gmail.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Reviewed-by: Charulatha Varadarajan <charu@ti.com> # for gpio.c
-
- 17 3月, 2012 1 次提交
-
-
由 Felipe Balbi 提交于
This patch allows us to drop the OMAP dependency from the OMAP4 keypad driver. Signed-off-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NSourav Poddar <sourav.poddar@ti.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 12 3月, 2012 2 次提交
-
-
由 Benoit Cousson 提交于
Add the 4 McSPI controller nodes present in an OMAP4 device. Remove SPI static device initialisation if DT is populated. Signed-off-by: NBenoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: NRob Herring <rob.herring@calxeda.com>
-
由 Peter Ujfalusi 提交于
The driver for omap-mcbsp-dai no longer exist since it has been merged with the omap-mcbsp driver. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Tested-by: NGrazvydas Ignotas <notasas@gmail.com> Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: NLiam Girdwood <lrg@ti.com>
-
- 25 2月, 2012 2 次提交
-
-
由 Kevin Hilman 提交于
Building omap_devices should only be done at init time, and since omap_device_build() is using early_platform calls which are also __init, this ensures that omap_device isn't trying to use functions that disappear. Signed-off-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
There's no need to have these defines in plat/io.h. Note that we now need to ifdef omap_read/write calls as they will be available for omap1 only. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 24 2月, 2012 1 次提交
-
-
由 Tony Lindgren 提交于
If CONFIG_SOC_OMAP3430 is not set and CONFIG_HDQ_MASTER_OMAP is selected for w1 driver we get the following error: arch/arm/mach-omap2/devices.c:662:13: error: 'OMAP_HDQ_BASE' undeclared here (not in a function) Looks like OMAP_HDQ_BASE is valid for all omaps except 2420, so we can remove the ifdef and not register the device on 2420. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 27 1月, 2012 1 次提交
-
-
由 Julia Lawall 提交于
pdata needs to be freed before leaving the function in an error case. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // <smpl> @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 16 1月, 2012 1 次提交
-
-
由 Ohad Ben-Cohen 提交于
omap3isp depends on CONFIG_IOMMU_API, so avoid registering its device (and defining its configuration structs) on !CONFIG_IOMMU_API. This is generally nice to have, but more importantly, it fixes: arch/arm/plat-omap/include/plat/iommu.h: In function 'dev_to_omap_iommu': arch/arm/plat-omap/include/plat/iommu.h:135: error: 'struct dev_archdata' has no member named 'iommu' arch/arm/mach-omap2/devices.c: In function 'omap3_init_camera': arch/arm/mach-omap2/devices.c:222: error: 'struct dev_archdata' has no member named 'iommu' make[1]: *** [arch/arm/mach-omap2/devices.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Which happens because while setting up the omap3isp device we try to access the (now nonexistent) iommu member of dev_archdata. Compile tested with omap2plus_defconfig on today's: commit e343a895 Merge: 06792c4d 193a667f Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Tue Jan 10 18:04:27 2012 -0800 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostReported-by: NGovindraj Raja <govindraj.raja@ti.com> Reported-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Joerg Roedel <Joerg.Roedel@amd.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 14 12月, 2011 1 次提交
-
-
由 Peter Ujfalusi 提交于
Add platform device registration for OMAP4 DMIC. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 05 12月, 2011 1 次提交
-
-
由 Ohad Ben-Cohen 提交于
Bind OMAP3's isp device to the isp's dedicated iommu, by setting the device's archdata iommu member. This way omap3isp will be able to use the generic IOMMU API without having to call any omap-specific binding method. Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
- 05 11月, 2011 1 次提交
-
-
由 Peter Ujfalusi 提交于
Commit f718e2c0 (ARM: OMAP2+: devices: Remove all omap_device_pm_latency structures) removed these structures. Commit 3528c58e (OMAP: omap_device: when building return platform_device instead of omap_device) now returns platform_device instead of omap_device. Fix up the omap-mcpdm init function since this part comes via sound tree, and there has been changes regarding to hwmod/omap_device_build. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> CC: Benoit Cousson <b-cousson@ti.com> CC: Kevin Hilman <khilman@ti.com> [tony@atomide.com: updated comments] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 05 10月, 2011 2 次提交
-
-
由 Benoit Cousson 提交于
Used the main OCP node to add bindings with the l3_noc driver. Remove l3_noc static device creation if DT is populated. Signed-off-by: NBenoit Cousson <b-cousson@ti.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
-
由 Benoit Cousson 提交于
Remove all these duplicated structures since a default one is now available. Signed-off-by: NBenoit Cousson <b-cousson@ti.com> Signed-off-by: NKevin Hilman <khilman@ti.com>
-
- 22 9月, 2011 1 次提交
-
-
由 Peter Ujfalusi 提交于
McPDM device is converted to omap device. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Jorge Eduardo Candelaria Signed-off-by: Margarita Olaya Cabrera Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMisael Lopez Cruz <misael.lopez@ti.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
- 16 9月, 2011 1 次提交
-
-
由 Kevin Hilman 提交于
All of the device init and device driver interaction with omap_device is done using platform_device pointers. To make this more explicit, have omap_device return a platform_device pointer instead of an omap_device pointer. All current users of the omap_device pointer were only using it to get at the platform_device pointer or struct device pointer, so fixing all of the users was trivial. This also makes it more difficult for device init code to directly access members of struct omap_device, and allows for easier changing of omap_device internals. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: NKevin Hilman <khilman@ti.com>
-
- 08 8月, 2011 1 次提交
-
-
由 Russell King 提交于
Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h before we start consolidating the individual platform implementations of the gpio header files. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 05 7月, 2011 1 次提交
-
-
由 Shubhrajyoti Datta 提交于
The mux settings for keypad are done for omap4430sdp in board file. Signed-off-by: NShubhrajyoti D <shubhrajyoti@ti.com> [tony@atomide.com: improved formatting a bit] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 01 6月, 2011 1 次提交
-
-
由 Rabin Vincent 提交于
Don't PTR_ERR() a non-error pointer: initcall omap4_l3_init+0x0/0xdc returned -544980480 after 0 usecs initcall omap4_l3_init+0x0/0xdc returned with error code -544980480 Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 22 3月, 2011 4 次提交
-
-
由 Sergio Aguirre 提交于
Make sure the kernel can be compiled with both OMAP2 and OMAP3 camera support linked in, and give public symbols proper omap2/omap3 prefixes. Signed-off-by: NSergio Aguirre <saaguirre@ti.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The omap3isp platform device requires platform data. Instead of registering the device in omap2_init_devices(), export an omap3_init_camera() function to fill the device structure with the platform data pointer and register the device. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sergio Aguirre 提交于
The ISP CBUFF module isn't use, its resource isn't needed. Signed-off-by: NSergio Aguirre <saaguirre@ti.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Tuukka Toivonen 提交于
Add new/changed base address definitions and resources for OMAP3630 ISP. The OMAP3430 CSI2PHY block is same as the OMAP3630 CSIPHY2 block. But the later name is chosen as it gives more symmetry to the names. Signed-off-by: NTuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: NVimarsh Zutshi <vimarsh.zutshi@gmail.com> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 3月, 2011 1 次提交
-
-
由 Aaro Koskinen 提交于
Fix the return value for the successful case. Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 09 3月, 2011 1 次提交
-
-
由 sricharan 提交于
The l3 interconnect device is build with all the data required to handle the error logging. The data is extracted from the hwmod data base. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Nsricharan <r.sricharan@ti.com> Acked-by: NBenoit Cousson <b-cousson@ti.com>
-