- 09 3月, 2012 1 次提交
-
-
由 Johannes Berg 提交于
The sensitivity parameters are never modified, so they should be const. Also remove the unused max_nrg_cck value to save some space. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 3月, 2012 3 次提交
-
-
由 Johannes Berg 提交于
It's only needed in a few places. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The HW configuration settings base_params, ht_params and bt_params all should be const, make it so. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This is a hardware parameter, so it shouldn't be configurable by the user. Users can disable aggregation (which is the only thing affected) with 11n_disable. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 07 3月, 2012 2 次提交
-
-
由 Johannes Berg 提交于
Writing to the global config structures is always wrong. To protect against such mistakes in the future, mark them const. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
It's not really a good idea to write to the global static configuration. Use the valid TX/RX antenna information only from the HW params struct except in the case where the values from the config are used to override the values from the EEPROM. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 18 2月, 2012 2 次提交
-
-
由 Emmanuel Grumbach 提交于
This will allow to set the hw_params after we fetch the uCode. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Remove the return value. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 03 2月, 2012 2 次提交
-
-
由 Don Fry 提交于
There is nothing device specific in the initialization of the bcast_sta_id so move it to the common inititalization routine. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
From now on, the transport layer in charge of providing access to the device. So change all the driver to give a pointer to the transport to all the low level functions that actually access the device. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 25 1月, 2012 1 次提交
-
-
由 Wey-Yi Guy 提交于
Update Copyright to 2012 Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 07 1月, 2012 1 次提交
-
-
由 Wey-Yi Guy 提交于
Update Copyright to 2012 Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 16 12月, 2011 1 次提交
-
-
由 Don Fry 提交于
Move the configuration pointer from the upper level iwl_priv to the lower level iwl_shared structure, with associated code fixes. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 03 12月, 2011 1 次提交
-
-
由 Wey-Yi Guy 提交于
The current default watchdog timer is enabled, but we are seeing issues on legacy devices. So change the default setting of watchdog timer to per device based. But user still can use the "wd_disable" module parameter to overwrite the system setting Cc: stable@vger.kernel.org #3.0+ Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 29 11月, 2011 1 次提交
-
-
由 Johannes Berg 提交于
The init microcode knows very well which calibrations are required and sends us results for those that are. Consequently, we can just send all of those to the RT uCode again. The problem with having the driver know about this is that it is a uCode feature, not a hardware feature so the config is completely unsuitable. The only thing we need to check is whether the device needs crystal calibration or not, add a new parameter to the configuration for that. This makes new uCode work on 6000 series devices. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 26 11月, 2011 1 次提交
-
-
由 Johannes Berg 提交于
The init microcode knows very well which calibrations are required and sends us results for those that are. Consequently, we can just send all of those to the RT uCode again. The problem with having the driver know about this is that it is a uCode feature, not a hardware feature so the config is completely unsuitable. The only thing we need to check is whether the device needs crystal calibration or not, add a new parameter to the configuration for that. This makes new uCode work on 6000 series devices. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 15 10月, 2011 3 次提交
-
-
由 Emmanuel Grumbach 提交于
Move iwl_enable_rfkill_int to iwl-core.h, and remove the empty iwl-helpers.h Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
After driver split, no need to separate station management functions in two files, merge it Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
Not needed since driver split. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 9月, 2011 3 次提交
-
-
由 Johannes Berg 提交于
There's nothing PCI(E) specific in this file. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Don Fry 提交于
All devices use the same value for beacon_time_tsf_bits. Use the #define Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Fry, Donald H 提交于
chain_noise_num_beacons is set and never changes. Use the #define rather than 3 levels of indirection. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 8月, 2011 5 次提交
-
-
由 Emmanuel Grumbach 提交于
Move all the iwlXXX_abgn_cfg forward declaration to a separate file so that iwl-pci.c doesn't need to include iwl-agn.h that includes all iwl-dev.h This allows to provide real encapsulation. Dereferencing iwl_priv in the bus layer will now lead to a compilation error. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
Which means that iwl-io.c doesn't need to include iwl-dev.h any more. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
Some of them weren't used at all, the others always had the same value since the driver split. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
Since it is used by all the layers, it needs to move to iwl_shared. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
It will hold declaration of functions and forward declaration of struct that are used by several layers. This will allow modules not to include iwl_priv. iwl_bus and iwl_trans are still visible to all. All the layers share the module parameters, move the struct to iwl-shared.h. Also add all module parameters to iwl_mod_params instead of having them as global static. This includes * debug_level * ant_coupling * bt_ch_announce * wanted_ucode_alternative Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 8月, 2011 4 次提交
-
-
由 Johannes Berg 提交于
We're working on improvements for the firmware for some devices, and need to bump the API for those since they won't be backward compatible completely (the earlier patch reserving queue 10 for P2P). Bump the API version to 6 for those devices but don't warn users of version 5 yet. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
For _bgn device, remove ht40 support for 5.2GHz, it is probably ok since the "band" is not support but just feel strange. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
1000 series are 1x2 devices, the old default using static smps which only use single antenna for rx, set the default to dynamic smps. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
linux/wireless.h and net/iw_handler.h headers are for wireless extensions only, so mac80211 drivers shouldn't be including them. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 21 7月, 2011 2 次提交
-
-
由 Emmanuel Grumbach 提交于
Since iwlagn_setup_deferred_work is always called, fold it into iwl_setup_deferred_work. BT related works are setup by the new bt_setup_deferred_work lib_ops. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Since iwlagn_rx_handler_setup is always called, fold it into iwl_rx_handler_setup. BT related handlers are setup by the new bt_rx_handler_setup lib_ops. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.guy@intel.com>
-
- 16 7月, 2011 2 次提交
-
-
由 Fry, Donald H 提交于
Not needed since the driver split. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
After driver split, no need to make the code so complex Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 12 7月, 2011 5 次提交
-
-
由 Don Fry 提交于
Not needed since the driver split. Move single use routines to calling location and keep static where possible. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
No need to do double level indirect call after driver split no functional changes Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Fry, Donald H 提交于
Not needed since the driver split. Eliminate redundant routine. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Fry, Donald H 提交于
Not needed since the driver split. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Fry, Donald H 提交于
Not needed since the driver split. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-