- 26 2月, 2017 8 次提交
-
-
git://git.infradead.org/linux-platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver updates from Darren Hart: "Big picture: - New intel_turbo_max_3 driver, providing max core frequency information to the scheduler. Intel PMC APL support, s0ix read API, and fixes. - New Silead touchscreen platform touchscreen descriptions. Additional hotkey support for the intel-hid driver. - New model support for dell-laptop and hp_accel. - Several cleanups, especially to the fujitsu-laptop and intel_mid_powerbtn drivers. Detail summary: platorm/x86: - silead depends on I2C being built-in - add support for devices with Silead touchscreens - Support Turbo Boost Max 3.0 for non HWP systems intel_turbo_max_3: - make it explicitly non-modular dell-laptop: - Add Latitude 7480 and others to the DMI whitelist intel-hid: - Support 5 button array thinkpad_acpi: - Call led_classdev_notify_brightness_hw_changed on kbd brightness change - Use brightness_set_blocking callback for LEDs - Stop setting led_classdev brightness directly acer-wmi: - add another KEY_WLAN keycode - Inform firmware that RF Button Driver is active - setup accelerometer when machine has appropriate notify event asus-wireless: - Fix indentation - Use per-HID HSWC parameters intel_pmc_ipc: - Add APL PMC PCI Id - read s0ix residency API - Remove unused iTCO_version variable alienware-wmi: - Remove header duplicate intel_pmc_core: - fix out-of-bounds accesses on stack intel_mid_powerbtn: - Use SCU IPC directly - Unify IRQ acknowledgment - Move comment to where it belongs - Unify PBSTATUS access - Remove snail address - Sort headers alphabetically - Join string literals - Enable driver for Merrifield - Acknowledge interrupts - Factor out mfld_ack() - Introduce driver data - Substitute mfld by mid - Convert to use devm_*() fujitsu-laptop: - make hotkey handling functions more similar - break up complex loop condition - move keycode processing to separate functions - decrease indentation in acpi_fujitsu_hotkey_notify() - simplify logolamp_get() - rework logolamp_set() to properly handle errors - set default trigger for radio LED to rfkill-any dell-smbios: - Auto-select as needed intel_mid_thermal: - Fix module autoload - Remove duplicated platform device ID mlx-platform: - mlxcpld-hotplug driver style fixes hp_accel: - Add support for HP ZBook 17" * tag 'platform-drivers-x86-v4.11-1' of git://git.infradead.org/linux-platform-drivers-x86: (45 commits) platform/x86: intel_turbo_max_3: make it explicitly non-modular platform/x86: dell-laptop: Add Latitude 7480 and others to the DMI whitelist platform/x86: intel-hid: Support 5 button array platform/x86: thinkpad_acpi: Call led_classdev_notify_brightness_hw_changed on kbd brightness change platform/x86: thinkpad_acpi: Use brightness_set_blocking callback for LEDs platform/x86: thinkpad_acpi: Stop setting led_classdev brightness directly leds: class: Add new optional brightness_hw_changed attribute platform/x86: acer-wmi: add another KEY_WLAN keycode platform/x86: acer-wmi: Inform firmware that RF Button Driver is active platform/x86: asus-wireless: Fix indentation platform/x86: asus-wireless: Use per-HID HSWC parameters platform/x86: intel_pmc_ipc: Add APL PMC PCI Id platform/x86: intel_pmc_ipc: read s0ix residency API platform/x86: alienware-wmi: Remove header duplicate platform/x86: intel_mid_powerbtn: Use SCU IPC directly platform/x86: intel_mid_powerbtn: Unify IRQ acknowledgment platform/x86: intel_mid_powerbtn: Move comment to where it belongs platform/x86: intel_mid_powerbtn: Unify PBSTATUS access platform/x86: intel_pmc_core: fix out-of-bounds accesses on stack platform/x86: silead depends on I2C being built-in ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk updates from Stephen Boyd: "The usual collection of new drivers, non-critical fixes, and updates to existing clk drivers. The bulk of the work is on Allwinner and Rockchip SoCs, but there's also an Intel Atom driver in here too. New Drivers: - Tegra BPMP firmware - Hisilicon hi3660 SoCs - Rockchip rk3328 SoCs - Intel Atom PMC - STM32F746 - IDT VersaClock 5P49V5923 and 5P49V5933 - Marvell mv98dx3236 SoCs - Allwinner V3s SoCs Removed Drivers: - Samsung Exynos4415 SoCs Updates: - Migrate ABx500 to OF - Qualcomm IPQ4019 CPU clks and general PLL support - Qualcomm MSM8974 RPM - Rockchip non-critical fixes and clk id additions - Samsung Exynos4412 CPUs - Socionext UniPhier NAND and eMMC support - ZTE zx296718 i2s and other audio clks - Renesas CAN and MSIOF clks for R-Car M3-W - Renesas resets for R-Car Gen2 and Gen3 and RZ/G1 - TI CDCE913, CDCE937, and CDCE949 clk generators - Marvell Armada ap806 CPU frequencies - STM32F4* I2S/SAI support - Broadcom BCM2835 DSI support - Allwinner sun5i and A80 conversion to new style clk bindings" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (130 commits) clk: renesas: mstp: ensure register writes complete clk: qcom: Do not drop device node twice clk: mvebu: adjust clock handling for the CP110 system controller clk: mvebu: Expand mv98dx3236-core-clock support clk: zte: add i2s clocks for zx296718 clk: sunxi-ng: sun9i-a80: Fix wrong pointer passed to PTR_ERR() clk: sunxi-ng: select SUNXI_CCU_MULT for sun5i clk: sunxi-ng: Check kzalloc() for errors and cleanup error path clk: tegra: Add BPMP clock driver clk: uniphier: add eMMC clock for LD11 and LD20 SoCs clk: uniphier: add NAND clock for all UniPhier SoCs ARM: dts: sun9i: Switch to new clock bindings clk: sunxi-ng: Add A80 Display Engine CCU clk: sunxi-ng: Add A80 USB CCU clk: sunxi-ng: Add A80 CCU clk: sunxi-ng: Support separately grouped PLL lock status register clk: sunxi-ng: mux: Get closest parent rate possible with CLK_SET_RATE_PARENT clk: sunxi-ng: mux: honor CLK_SET_RATE_NO_REPARENT flag clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers clk: qcom: SDHCI enablement on Nexus 5X / 6P ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c updates from Wolfram Sang: "I2C has for you two new drivers (Tegra BPMP and STM32F4), interrupt support for pca954x muxes, and a bunch of driver bugfixes and improvements. Nothing really special this cycle. A few commits have been added to my tree just recently. Those are the Tegra BPMP driver and a few straightforward bugfixes or cleanups which I prefer to have upstream rather soonish. The rest had proper linux-next exposure" * 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (25 commits) i2c: thunderx: Replace pci_enable_msix() i2c: exynos5: fix arbitration lost handling i2c: exynos5: disable fifo-almost-empty irq signal when necessary i2c: at91: ensure state is restored after suspending i2c: bcm2835: Avoid possible NULL ptr dereference i2c: Add Tegra BPMP I2C proxy driver dt-bindings: Add Tegra186 BPMP I2C binding misc: eeprom: at24: use device_property_*() functions instead of of_get_property() i2c: mux: pca954x: Add interrupt controller support dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller i2c: mux: pca954x: Add missing pca9542 definition to chip_desc i2c: riic: correctly finish transfers i2c: i801: Add support for Intel Gemini Lake i2c: mux: pca9541: Export OF device ID table as module aliases i2c: mux: pca954x: Export OF device ID table as module aliases i2c: mux: mlxcpld: remove unused including <linux/version.h> i2c: busses: constify i2c_algorithm structures i2c: i2c-mux-gpio: rename i2c-gpio-mux to i2c-mux-gpio i2c: sh_mobile: document support for r8a7796 (R-Car M3-W) i2c: i2c-cros-ec-tunnel: Reduce logging noise ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
-
git://github.com/bzolnier/linux由 Linus Torvalds 提交于
Pull fbdev updates from Bartlomiej Zolnierkiewicz: - fix for font color when console is switched to another fb driver - deferred probing fixes for simplefb driver - preparations to add support of an optional GPIO to enable panel for ARM CLCD driver - some improvements for ssd1307fb driver - cleanups for OMAP fbdev LCD drivers - misc fixes/cleanups for various fb drivers * tag 'fbdev-v4.11' of git://github.com/bzolnier/linux: (30 commits) video: fbdev: fsl-diu-fb: fix spelling mistake "palette" fbdev: ssd1307fb: include linux/gpio/consumer.h video: fbdev: fsl-diu-fb: remove impossible condition video: fbdev: amifb: remove impossible condition fbdev/ssd1307fb: clear screen in probe fbdev/ssd1307fb: add support to enable VBAT fbdev: ssd1307fb: Make reset gpio devicetree property optional fbdev: ssd1307fb: Remove reset-active-low from the DT binding document fbdev: ssd1307fb: Start to use gpiod API for reset gpio video: fbdev: sh_mobile_lcdcfb: fix error return code in sh_mobile_lcdc_probe() video: fbdev: offb: switch to using for_each_node_by_type video/console: use setup_timer and mod_timer instead of init_timer fbdev: omap/lcd: Make callbacks optional fbdev: omap/lcd: Staticize non-exported lcd_panel structs fbdev: omap/lcd: Remove no-op driver callbacks video/mbx: use simple_open() video: fbdev: stifb: handle NULL return value from ioremap_nocache video: fbdev: pmagb-b-fb: Remove bad `__init' annotation video: fbdev: pmag-ba-fb: Remove bad `__init' annotation video: ARM CLCD: use panel device node for getting backlight and mode ...
-
由 Joe Perches 提交于
These are the current source files that should not have executable attributes set. [ Normally this would be sent through Andrew Morton's tree but his quilt tools don't like permission only patches. ] Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge more updates from Andrew Morton: - almost all of the rest of MM - misc bits - KASAN updates - procfs - lib/ updates - checkpatch updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (124 commits) checkpatch: remove false unbalanced braces warning checkpatch: notice unbalanced else braces in a patch checkpatch: add another old address for the FSF checkpatch: update $logFunctions checkpatch: warn on logging continuations checkpatch: warn on embedded function names lib/lz4: remove back-compat wrappers fs/pstore: fs/squashfs: change usage of LZ4 to work with new LZ4 version crypto: change LZ4 modules to work with new LZ4 module version lib/decompress_unlz4: change module to work with new LZ4 module version lib: update LZ4 compressor module lib/test_sort.c: make it explicitly non-modular lib: add CONFIG_TEST_SORT to enable self-test of sort() rbtree: use designated initializers linux/kernel.h: fix DIV_ROUND_CLOSEST to support negative divisors lib/find_bit.c: micro-optimise find_next_*_bit lib: add module support to atomic64 tests lib: add module support to glob tests lib: add module support to crc32 tests kernel/ksysfs.c: add __ro_after_init to bin_attribute structure ...
-
由 Thomas Gleixner 提交于
mac80211_hwsim initializes a hrtimer with clockid CLOCK_MONOTONIC_RAW. That's not supported. Use CLOCK_MONOTNIC instead. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 2月, 2017 32 次提交
-
-
由 Paul Gortmaker 提交于
The Kconfig currently controlling compilation of this code is: drivers/platform/x86/Kconfig:config INTEL_TURBO_MAX_3 drivers/platform/x86/Kconfig: bool "Intel Turbo Boost Max Technology 3.0 enumeration driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. We do uncover some implicit includes during build coverage that were hidden behind the module.h which pulls in a lot of dependants. Cc: Andy Shevchenko <andy@infradead.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Alex Hung 提交于
This is to support Latitude 7480 and many other newer Dell laptops. Signed-off-by: NAlex Hung <alex.hung@canonical.com> Reviewed-by: NPali Rohár <pali.rohar@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Alex Hung 提交于
New firmwares include a feature called 5 button array that supports super key, volume up/down, rotation lock and power button. Support for this feature is required to fix power button on some recent systems. This patch was tested on a Dell Latitude 7480. Signed-off-by: NAlex Hung <alex.hung@canonical.com> Reviewed-by: NMichał Kępień <kernel@kempniu.pl> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Hans de Goede 提交于
platform/x86: thinkpad_acpi: Call led_classdev_notify_brightness_hw_changed on kbd brightness change Make thinkpad_acpi call led_classdev_notify_brightness_hw_changed on the kbd_led led_classdev registered by thinkpad_acpi when the kbd backlight brightness is changed through the hotkey. This will allow userspace to monitor (poll) for brightness changes on these LEDs caused by the hotkey. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NPavel Machek <pavel@ucw.cz>
-
由 Hans de Goede 提交于
Now a days the LED core can take care of executing brightness_set from a workqueue if it needs to sleep, make use of this and remove a bunch of DIY code for this. Since this commit removes the workqueue usage for LEDs, the led_sysfs_blink_set callback may now also sleep, this is fine. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NPavel Machek <pavel@ucw.cz>
-
由 Hans de Goede 提交于
There is no need to set the led_classdev's brightness value from its set_brightness callback, this is taken care of by the led-core and thinkpad_acpi really should not be mucking with it. Note that kbdlight_set_level_and_update() is still used by the old thinpad_acpi specific sysfs interface for the led, so we cannot remove it. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NPavel Machek <pavel@ucw.cz>
-
由 Hans de Goede 提交于
Some LEDs may have their brightness level changed autonomously (outside of kernel control) by hardware / firmware. This commit adds support for an optional brightness_hw_changed attribute to signal such changes to userspace (if a driver can detect them): What: /sys/class/leds/<led>/brightness_hw_changed Date: January 2017 KernelVersion: 4.11 Description: Last hardware set brightness level for this LED. Some LEDs may be changed autonomously by hardware/firmware. Only LEDs where this happens and the driver can detect this, will have this file. This file supports poll() to detect when the hardware changes the brightness. Reading this file will return the last brightness level set by the hardware, this may be different from the current brightness. Drivers which want to support this, simply add LED_BRIGHT_HW_CHANGED to their flags field and call led_classdev_notify_brightness_hw_changed() with the hardware set brightness when they detect a hardware / firmware triggered brightness change. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NJacek Anaszewski <jacek.anaszewski@gmail.com>
-
由 Chris Chiu 提交于
Now that we have informed the firmware that the RF Button driver is active, laptops such as the Acer TravelMate P238-M will generate a WMI key event with code 0x86 when the Fn+F3 airplane mode key is pressed. Add this keycode to the table so that it is converted to an appropriate input event. Signed-off-by: NChris Chiu <chiu@endlessm.com> Signed-off-by: NDaniel Drake <drake@endlessm.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Chris Chiu 提交于
The same method to activate LM(Launch Manager) can also be used to activate the RF Button driver with different bit toggled in the same lm_status. To express that many functions this byte field can achieve, rename the lm_status to app_status. And also the app_mask is the bit mask which specifically indicate which bits are going to be changed. This solves a problem where the AR9565 wifi included in the Acer Aspire ES1-421 is permanently hard blocked according to the rfkill GPIO read by ath9k. Signed-off-by: NChris Chiu <chiu@endlessm.com> Signed-off-by: NDaniel Drake <drake@endlessm.com> Reviewed-by: NLee, Chun-Yi <jlee@suse.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 João Paulo Rechi Vita 提交于
Fix indentation problem introduced when this driver was first merged into the kernel. Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 João Paulo Rechi Vita 提交于
Some Asus machines use 0x4/0x5 as their LED on/off values, while others use 0x0/0x1, as shown in the DSDT excerpts below. Luckily it seems this behavior is tied to different HIDs, after looking at 44 DSDTs from different Asus models. Another small difference is that a few of them call GWBL instead of OWGS, and SWBL instead of OWGD. That does not seem to make a difference for asus-wireless, and is additional reasoning to not try to call these methods directly. Device (ASHS) | Device (ASHS) { | { Name (_HID, "ATK4002") | Name (_HID, "ATK4001") Method (HSWC, 1, Serialized) | Method (HSWC, 1, Serialized) { | { If ((Arg0 < 0x02)) | If ((Arg0 < 0x02)) { | { OWGD (Arg0) | OWGD (Arg0) Return (One) | Return (One) } | } If ((Arg0 == 0x02)) | { | If ((Arg0 == 0x02)) Local0 = OWGS () | { If (Local0) | Return (OWGS ()) { | } Return (0x05) | } | If ((Arg0 == 0x03)) Else | { { | Return (0xFF) Return (0x04) | } } | } | If ((Arg0 == 0x80)) If ((Arg0 == 0x03)) | { { | Return (One) Return (0xFF) | } } | } If ((Arg0 == 0x04)) | Method (_STA, 0, NotSerialized) { | { OWGD (Zero) | If ((MSOS () >= OSW8)) Return (One) | { } | Return (0x0F) If ((Arg0 == 0x05)) | } { | Else OWGD (One) | { Return (One) | Return (Zero) } | } If ((Arg0 == 0x80)) | } { | } Return (One) | } | } | Method (_STA, 0, NotSerialized) | { | If ((MSOS () >= OSW8)) | { | Return (0x0F) | } | Else | { | Return (Zero) | } | } | } | Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Rajneesh Bhardwaj 提交于
This patch adds the PCI Device id for Power Management Controller on Intel Apollo Lake platforms. Intel PMC IPC Driver loads as a platform driver on Apollo Lake platforms since Intel BIOS hides the PCI Configuration space for 0:13:1 and re-enumerates it as ACPI device (INT34D2). The correct PCI Device ID should be added if some platform firmware choses to enumerate the device via PCI space. Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Shanth Murthy 提交于
This patch adds a new API to indicate S0ix residency in usec. It utilizes the PMC Global Control Registers (GCR) to read deep and shallow S0ix residency. PMC MMIO resources: o Lower 4kB: IPC1 (PMC inter-processor communication) interface o Upper 4kB: GCR (Global Control Registers) This enables the power management framework to take corrective actions when the platform fails to enter S0ix after kernel freeze as part of the suspend to idle flow. (echo freeze > /sys/power/state). This is expected to be used with a S0ix failsafe framework such as: <https://lwn.net/Articles/689505/> [rajneesh: folded in "fix division in 32-bit case" from Andy Shevchenko] Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: NShanth Murthy <shanth.murthy@intel.com> [andy: fixed kbuild error, removed "total" from variables, fixed macro] Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Andy Shevchenko 提交于
No need to #include <linux/acpi.h> twice. Remove second occurrence. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Andy Shevchenko 提交于
On older Intel MID platforms is using SCU IPC library beneath MSIC calls. To make access unified between old and new platforms use SCU IPC library directly. It's safe since serialization is done in the library. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Andy Shevchenko 提交于
The IRQ on Intel Merrifield can be acknowledged in the similar way it's done for previous MID platforms. Unify acknowledgment via SCU IPC. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
git://github.com/openrisc/linux由 Linus Torvalds 提交于
Pull OpenRISC updates from Stafford Horne: "Highlights include: - optimized memset and memcpy routines, ~20% boot time saving - support for cpu idling - adding support for l.swa and l.lwa atomic operations (in spec from 2014) - use atomics to implement: bitops, cmpxchg, futex - the atomics are in preparation for SMP support" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: (25 commits) openrisc: head: Init r0 to 0 on start openrisc: Export ioremap symbols used by modules arch/openrisc/lib/memcpy.c: use correct OR1200 option openrisc: head: Remove unused strings openrisc: head: Move init strings to rodata section openrisc: entry: Fix delay slot detection openrisc: entry: Whitespace and comment cleanups scripts/checkstack.pl: Add openrisc support MAINTAINERS: Add the openrisc official repository openrisc: Add .gitignore openrisc: Add optimized memcpy routine openrisc: Add optimized memset openrisc: Initial support for the idle state openrisc: Fix the bitmask for the unit present register openrisc: remove unnecessary stddef.h include openrisc: add futex_atomic_* implementations openrisc: add optimized atomic operations openrisc: add cmpxchg and xchg implementations openrisc: add atomic bitops openrisc: add l.lwa/l.swa emulation ...
-
由 Sven Eckelmann 提交于
Lines containing "} else {" should not be detected as unbalanced braces. But the second check can be reduced to ".+else\s*{" and it therefore never checked if the beginning of a line contains any other character (like the relevant "}"). This check would also return true for "} else {" and create warnings like CHECK: Unbalanced braces around else statement #391: FILE: ./net/batman-adv/tvlv.c:391: + } else { The check can be changed to check the whole line for the missing "}" to avoid this false positive. Fixes: 0d1532456c26 ("checkpatch: notice unbalanced else braces in a patch") Link: http://lkml.kernel.org/r/20170220121644.12209-1-sven@narfation.orgSigned-off-by: NSven Eckelmann <sven@narfation.org> Acked-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Patches that add or modify code like } else <foo> or else { <bar> where one branch appears to have a brace and the other branch does not have a brace should emit a --strict style message. Link: http://lkml.kernel.org/r/c6be32747fc725cbc235802991746700a0f54fdc.1486754390.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matthew Wilcox 提交于
We still have a lot of old addresses for the FSF in the kernel. willy@harry:~/kernel/idr$ git grep '675 Mass' |wc -l 1502 willy@harry:~/kernel/idr$ git grep '59 Temple' |wc -l 2825 willy@harry:~/kernel/idr$ git grep '51 Franklin' |wc -l 2020 Let's discourage adding the oldest one too. Link: http://lkml.kernel.org/r/20170128173052.GA23532@bombadil.infradead.orgSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com> Acked-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miles Chen 提交于
Currently checkpatch.pl does not recognize printk_deferred* functions as log functions and complains about the line length of printk_deferred* functions. Add printk_deferred* to logFunctions to fix it. Link: http://lkml.kernel.org/r/1484537124-18083-1-git-send-email-miles.chen@mediatek.comSigned-off-by: NMiles Chen <miles.chen@mediatek.com> Acked-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
pr_cont(...) and printk(KERN_CONT ...) uses should be discouraged as their output can be interleaved by multiple logging processes. Link: http://lkml.kernel.org/r/7100ba00098694ec81471a299583ed068975fd05.1483465888.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Embedded function names are less appropriate to use when refactoring can cause function renaming. Prefer the use of "%s", __func__ to embedded function names. Link: http://lkml.kernel.org/r/ac9631fdbac5af3507c5bfe88ad9064f0ed764ec.1483510416.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Acked-by: NAndy Whitcroft <apw@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sven Schmidt 提交于
Remove the functions introduced as wrappers for providing backwards compatibility to the prior LZ4 version. They're not needed anymore since there's no callers left. Link: http://lkml.kernel.org/r/1486321748-19085-6-git-send-email-4sschmid@informatik.uni-hamburg.deSigned-off-by: NSven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sven Schmidt 提交于
Update fs/pstore and fs/squashfs to use the updated functions from the new LZ4 module. Link: http://lkml.kernel.org/r/1486321748-19085-5-git-send-email-4sschmid@informatik.uni-hamburg.deSigned-off-by: NSven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sven Schmidt 提交于
Update the crypto modules using LZ4 compression as well as the test cases in testmgr.h to work with the new LZ4 module version. Link: http://lkml.kernel.org/r/1486321748-19085-4-git-send-email-4sschmid@informatik.uni-hamburg.deSigned-off-by: NSven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sven Schmidt 提交于
Update the unlz4 wrapper to work with the updated LZ4 kernel module version. Link: http://lkml.kernel.org/r/1486321748-19085-3-git-send-email-4sschmid@informatik.uni-hamburg.deSigned-off-by: NSven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sven Schmidt 提交于
Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.deSigned-off-by: NSven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Gortmaker 提交于
The Kconfig currently controlling compilation of this code is: lib/Kconfig.debug:config TEST_SORT lib/Kconfig.debug: bool "Array-based sort test" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the code there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering becomes slightly earlier when we change it to use subsys_initcall as done here. However, since it is a self contained test, this shouldn't be an issue and subsys_initcall seems like a better fit for this particular case. We also delete the MODULE_LICENSE tag since that information is now contained at the top of the file in the comments. Link: http://lkml.kernel.org/r/20170124225608.7319-1-paul.gortmaker@windriver.comSigned-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Cc: Kostenzer Felix <fkostenzer@live.at> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kostenzer Felix 提交于
Along with the addition made to Kconfig.debug, the prior existing but permanently disabled test function has been slightly refactored. Patch has been tested using QEMU 2.1.2 with a .config obtained through 'make defconfig' (x86_64) and manually enabling the option. [arnd@arndb.de: move sort self-test into a separate file] Link: http://lkml.kernel.org/r/20170112110657.3123790-1-arnd@arndb.de Link: http://lkml.kernel.org/r/HE1PR09MB0394B0418D504DCD27167D4FD49B0@HE1PR09MB0394.eurprd09.prod.outlook.comSigned-off-by: NKostenzer Felix <fkostenzer@live.at> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. Link: http://lkml.kernel.org/r/20161217010253.GA140470@beastSigned-off-by: NKees Cook <keescook@chromium.org> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: David Howells <dhowells@redhat.com> Cc: Jie Chen <fykcee1@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Niklas Söderlund 提交于
While working on a thermal driver I encounter a scenario where the divisor could be negative, instead of adding local code to handle this I though I first try to add support for this in DIV_ROUND_CLOSEST. Add support to DIV_ROUND_CLOSEST for negative divisors if both dividend and divisor variable types are signed. This should not alter current behavior for users of the macro as previously negative divisors where not supported. Before: DIV_ROUND_CLOSEST( 59, 4) = 15 DIV_ROUND_CLOSEST( 59, -4) = -14 DIV_ROUND_CLOSEST( -59, 4) = -15 DIV_ROUND_CLOSEST( -59, -4) = 14 After: DIV_ROUND_CLOSEST( 59, 4) = 15 DIV_ROUND_CLOSEST( 59, -4) = -15 DIV_ROUND_CLOSEST( -59, 4) = -15 DIV_ROUND_CLOSEST( -59, -4) = 15 [akpm@linux-foundation.org: fix comment, per Guenter] Link: http://lkml.kernel.org/r/20161222102217.29011-1-niklas.soderlund+renesas@ragnatech.seSigned-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-