- 13 2月, 2008 16 次提交
-
-
由 Pavel Emelyanov 提交于
The audit_log_start() will expand into an empty do { } while (0) construction and the audit_ctx becomes unused. The solution: push current->audit_context into audit_log_start() directly, since it is not required in any other place in the calling function. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The genl_unregister_family() calls the genl_unregister_mc_groups(), which takes and releases the genl_lock and then locks and releases this lock itself. Relax this behavior, all the more so the genl_unregister_mc_groups() is called from genl_unregister_family() only. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Currently, if the call to netlbl_domhsh_search succeeds the return result will still be NULL. Fix that, by returning the found entry (if any). Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rami Rosen 提交于
This patch removes unused declaration of dflt_rt_lookup() method in include/net/ndisc.h Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Urs Thuermann 提交于
Fix comment for skb_pull_rcsum Signed-off-by: NUrs Thuermann <urs@isnogud.escape.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This is a long-standing bug in the IPsec IPv6 code that breaks when we emit a IPsec tunnel-mode datagram packet. The problem is that the code the emits the packet assumes the IPv6 stack will fragment it later, but the IPv6 stack assumes that whoever is emitting the packet is going to pre-fragment the packet. In the long term we need to fix both sides, e.g., to get the datagram code to pre-fragment as well as to get the IPv6 stack to fragment locally generated tunnel-mode packet. For now this patch does the second part which should make it work for the IPsec host case. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Frank Blaschka provided the bug report and the initial suggested fix for this bug. He also validated this version of this fix. The problem is that the access to neigh->arp_queue is inconsistent, we grab references when dropping the lock lock to call neigh->ops->solicit() but this does not prevent other threads of control from trying to send out that packet at the same time causing corruptions because both code paths believe they have exclusive access to the skb. The best option seems to be to hold the write lock on neigh->lock during the ->solicit() call. I looked at all of the ndisc_ops implementations and this seems workable. The only case that needs special care is the IPV4 ARP implementation of arp_solicit(). It wants to take neigh->lock as a reader to protect the header entry in neigh->ha during the emission of the soliciation. We can simply remove the read lock calls to take care of that since holding the lock as a writer at the caller providers a superset of the protection afforded by the existing read locking. The rest of the ->solicit() implementations don't care whether the neigh is locked or not. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Newall 提交于
Arjan: With the help of kerneloops.org I've spotted a nice little interaction between the TTY layer and the bluetooth code, however the tty layer is not something I'm all too familiar with so I rather ask than brute-force fix the code incorrectly. The raw details are at: http://www.kerneloops.org/search.php?search=uart_flush_buffer What happens is that, on closing the bluetooth tty, the tty layer goes into the release_dev() function, which first does a bunch of stuff, then sets the file->private_data to NULL, does some more stuff and then calls the ldisc close function. Which in this case, is hci_uart_tty_close(). Now, hci_uart_tty_close() calls hci_uart_close() which clears some internal bit, and then calls hci_uart_flush()... which calls back to the tty layers' uart_flush_buffer() function. (in drivers/bluetooth/hci_tty.c around line 194) Which then WARN_ON()'s because that's not allowed/supposed to be called this late in the shutdown of the port.... Should the bluetooth driver even call this flush function at all?? David: This seems to be what happens: Hci_uart_close() flushes using hci_uart_flush(). Subsequently, in hci_dev_do_close(), (one step in hci_unregister_dev()), hci_uart_flush() is called again. The comment in uart_flush_buffer(), relating to the WARN_ON(), indicates you can't flush after the port is closed; which sounds reasonable. I think hci_uart_close() should set hdev->flush to NULL before returning. Hci_dev_do_close() does check for this. The code path is rather involved and I'm not entirely clear of all steps, but I think that's what should be done. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
This patch changes current use of: init_timer(), add_timer() and del_timer() to setup_timer() with mod_timer(), which should be safer anyway. Reported-by: NJann Traschewski <jann@gmx.de> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
According to one of Jann's OOPS reports it looks like BUG_ON(timer_pending(timer)) triggers during add_timer() in ax25_start_t1timer(). This patch changes current use of: init_timer(), add_timer() and del_timer() to setup_timer() with mod_timer(), which should be safer anyway. Reported-by: NJann Traschewski <jann@gmx.de> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
> ================================= > [ INFO: inconsistent lock state ] > 2.6.24-dg8ngn-p02 #1 > --------------------------------- > inconsistent {softirq-on-W} -> {in-softirq-R} usage. > linuxnet/3046 [HC0[0]:SC1[2]:HE1:SE0] takes: > (ax25_route_lock){--.+}, at: [<f8a0cfb7>] ax25_get_route+0x18/0xb7 [ax25] > {softirq-on-W} state was registered at: ... This lockdep report shows that ax25_route_lock is taken for reading in softirq context, and for writing in process context with BHs enabled. So, to make this safe, all write_locks in ax25_route.c are changed to _bh versions. Reported-by: Jann Traschewski <jann@gmx.de>, Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
This lockdep warning: > ======================================================= > [ INFO: possible circular locking dependency detected ] > 2.6.24 #3 > ------------------------------------------------------- > swapper/0 is trying to acquire lock: > (ax25_list_lock){-+..}, at: [<f91dd3b1>] ax25_destroy_socket+0x171/0x1f0 [ax25] > > but task is already holding lock: > (slock-AF_AX25){-+..}, at: [<f91dbabc>] ax25_std_heartbeat_expiry+0x1c/0xe0 [ax25] > > which lock already depends on the new lock. ... shows that ax25_list_lock and slock-AF_AX25 are taken in different order: ax25_info_show() takes slock (bh_lock_sock(ax25->sk)) while ax25_list_lock is held, so reversely to other functions. To fix this the sock lock should be moved to ax25_info_start(), and there would be still problem with breaking ax25_list_lock (it seems this "proper" order isn't optimal yet). But, since it's only for reading proc info it seems this is not necessary (e.g. ax25_send_to_raw() does similar reading without this lock too). So, this patch removes sock lock to avoid deadlock possibility; there is also used sock_i_ino() function, which reads sk_socket under proper read lock. Additionally printf format of this i_ino is changed to %lu. Reported-by: NBernard Pidoux F6BVP <f6bvp@free.fr> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Use key/offset caching to change /proc/net/route (use by iputils route) from O(n^2) to O(n). This improves performance from 30sec with 160,000 routes to 1sec. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This fixes possible problems when trie_firstleaf() returns NULL to trie_leafindex(). Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Various RFCs have all sorts of things to say about the CS field of the DSCP value. In particular they try to make the distinction between values that should be used by "user applications" and things like routing daemons. This seems to have influenced the CAP_NET_ADMIN check which exists for IP_TOS socket option settings, but in fact it has an off-by-one error so it wasn't allowing CS5 which is meant for "user applications" as well. Further adding to the inconsistency and brokenness here, IPV6 does not validate the DSCP values specified for the IPV6_TCLASS socket option. The real actual uses of these TOS values are system specific in the final analysis, and these RFC recommendations are just that, "a recommendation". In fact the standards very purposefully use "SHOULD" and "SHOULD NOT" when describing how these values can be used. In the final analysis the only clean way to provide consistency here is to remove the CAP_NET_ADMIN check. The alternatives just don't work out: 1) If we add the CAP_NET_ADMIN check to ipv6, this can break existing setups. 2) If we just fix the off-by-one error in the class comparison in IPV4, certain DSCP values can be used in IPV6 but not IPV4 by default. So people will just ask for a sysctl asking to override that. I checked several other freely available kernel trees and they do not make any privilege checks in this area like we do. For the BSD stacks, this goes back all the way to Stevens Volume 2 and beyond. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
- 12 2月, 2008 24 次提交
-
-
由 Linus Torvalds 提交于
Even if we don't want to register the WMI driver, we should initialize the wmi_blocks list to be empty, since we don't want the wmi helper functions to oops just because that basic list has not even been set up. With this, "find_guid()" will happily return "not found" rather than oopsing all over the place, and the callers will then just automatically return false or AE_NOT_FOUND as appropriate. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
The makefile magic for installing the 32-bit vdso images on disk had a little error. A single-line change would fix that bug, but this does a little more to reduce the error-prone duplication of this bit of makefile variable magic. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KOSAKI Motohiro 提交于
Kosaki Motohito noted that "numactl --interleave=all ..." failed in the presence of memoryless nodes. This patch attempts to fix that problem. Some background: numactl --interleave=all calls set_mempolicy(2) with a fully populated [out to MAXNUMNODES] nodemask. set_mempolicy() [in do_set_mempolicy()] calls contextualize_policy() which requires that the nodemask be a subset of the current task's mems_allowed; else EINVAL will be returned. A task's mems_allowed will always be a subset of node_states[N_HIGH_MEMORY] i.e., nodes with memory. So, a fully populated nodemask will be declared invalid if it includes memoryless nodes. NOTE: the same thing will occur when running in a cpuset with restricted mem_allowed--for the same reason: node mask contains dis-allowed nodes. mbind(2), on the other hand, just masks off any nodes in the nodemask that are not included in the caller's mems_allowed. In each case [mbind() and set_mempolicy()], mpol_check_policy() will complain [again, resulting in EINVAL] if the nodemask contains any memoryless nodes. This is somewhat redundant as mpol_new() will remove memoryless nodes for interleave policy, as will bind_zonelist()--called by mpol_new() for BIND policy. Proposed fix: 1) modify contextualize_policy logic to: a) remember whether the incoming node mask is empty. b) if not, restrict the nodemask to allowed nodes, as is currently done in-line for mbind(). This guarantees that the resulting mask includes only nodes with memory. NOTE: this is a [benign, IMO] change in behavior for set_mempolicy(). Dis-allowed nodes will be silently ignored, rather than returning an error. c) fold this code into mpol_check_policy(), replace 2 calls to contextualize_policy() to call mpol_check_policy() directly and remove contextualize_policy(). 2) In existing mpol_check_policy() logic, after "contextualization": a) MPOL_DEFAULT: require that in coming mask "was_empty" b) MPOL_{BIND|INTERLEAVE}: require that contextualized nodemask contains at least one node. c) add a case for MPOL_PREFERRED: if in coming was not empty and resulting mask IS empty, user specified invalid nodes. Return EINVAL. c) remove the now redundant check for memoryless nodes 3) remove the now redundant masking of policy nodes for interleave policy from mpol_new(). 4) Now that mpol_check_policy() contextualizes the nodemask, remove the in-line nodes_and() from sys_mbind(). I believe that this restores mbind() to the behavior before the memoryless-nodes patch series. E.g., we'll no longer treat an invalid nodemask with MPOL_PREFERRED as local allocation. [ Patch history: v1 -> v2: - Communicate whether or not incoming node mask was empty to mpol_check_policy() for better error checking. - As suggested by David Rientjes, remove the now unused cpuset_nodes_subset_current_mems_allowed() from cpuset.h v2 -> v3: - As suggested by Kosaki Motohito, fold the "contextualization" of policy nodemask into mpol_check_policy(). Looks a little cleaner. ] Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Tested-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Fix build for sim_defconfig
-
由 Jonathan Corbet 提交于
So I spent a while pounding my head against my monitor trying to figure out the vmsplice() vulnerability - how could a failure to check for *read* access turn into a root exploit? It turns out that it's a buffer overflow problem which is made easy by the way get_user_pages() is coded. In particular, "len" is a signed int, and it is only checked at the *end* of a do {} while() loop. So, if it is passed in as zero, the loop will execute once and decrement len to -1. At that point, the loop will proceed until the next invalid address is found; in the process, it will likely overflow the pages array passed in to get_user_pages(). I think that, if get_user_pages() has been asked to grab zero pages, that's what it should do. Thus this patch; it is, among other things, enough to block the (already fixed) root exploit and any others which might be lurking in similar code. I also think that the number of pages should be unsigned, but changing the prototype of this function probably requires some more careful review. Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Fix build break (missing include)
-
由 Pekka Enberg 提交于
Matt is already the maintainer of SLOB which is one of the "SLAB" allocators in the kernel so add him to MAINTAINERS. Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv: platform driver allocs dma without create pata_ninja32: setup changes pata_legacy: typo fix pata_amd: Note in the module description it handles Nvidia sata_mv: fix loop with last port libata: ignore deverr on SETXFER if mode is configured pata_via: fix SATA cable detection on cx700
-
由 Andi Kleen 提交于
This avoids warnings with unreferenced variables in the !NUMA case. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Olof Johansson 提交于
Commit 313abe55 ("mlx4_core: For 64-bit systems, vmap() kernel queue buffers") caused this to pop up on powerpc allyesconfig, looks like a missing include file: drivers/net/mlx4/alloc.c: In function 'mlx4_buf_alloc': drivers/net/mlx4/alloc.c:162: error: implicit declaration of function 'vmap' drivers/net/mlx4/alloc.c:162: error: 'VM_MAP' undeclared (first use in this function) drivers/net/mlx4/alloc.c:162: error: (Each undeclared identifier is reported only once drivers/net/mlx4/alloc.c:162: error: for each function it appears in.) drivers/net/mlx4/alloc.c:162: warning: assignment makes pointer from integer without a cast drivers/net/mlx4/alloc.c: In function 'mlx4_buf_free': drivers/net/mlx4/alloc.c:187: error: implicit declaration of function 'vunmap' Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Tony Luck 提交于
Commit bdc80787 broke the build for this config because the sim_defconfig selects CONFIG_HZ=250 but include/asm-ia64/param.h has an ifdef for the simulator to force HZ to 32. So we ended up with a kernel/timeconst.h set for HZ=250 ... which then failed the check for the right HZ value and died with: Drop the #ifdef magic from param.h and make force CONFIG_HZ=32 directly for the simulator. Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Byron Bradley 提交于
When the sata_mv driver is used as a platform driver, mv_create_dma_pools() is never called so it fails when trying to alloc in mv_pool_start(). Signed-off-by: NByron Bradley <byron.bbradley@gmail.com> Acked-by: NMark Lord <mlord@pobox.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
Forcibly set more of the configuration at init time. This seems to fix at least one problem reported. We don't know what most of these bits do, but we do know what windows stuffs there. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
This has confused a few people so fix it Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Yinghai Lu 提交于
commit f351b2d6 sata_mv: Support SoC controllers cause panic: scsi 4:0:0:0: Direct-Access ATA HITACHI HDS7225S V44O PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] 488390625 512-byte hardware sectors (250056 MB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sde] 488390625 512-byte hardware sectors (250056 MB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde:<1>BUG: unable to handle kernel NULL pointer dereference at 000000000000001a IP: [<ffffffff806262c7>] mv_interrupt+0x21c/0x4cc PGD 0 Oops: 0000 [1] SMP CPU 3 Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.24-smp-08636-g0afc2edf-dirty #26 RIP: 0010:[<ffffffff806262c7>] [<ffffffff806262c7>] mv_interrupt+0x21c/0x4cc RSP: 0000:ffff8102050bbec8 EFLAGS: 00010297 RAX: 0000000000000008 RBX: 0000000000000000 RCX: 0000000000000003 RDX: 0000000000008000 RSI: 0000000000000286 RDI: ffff8102035180e0 RBP: 0000000000000001 R08: 0000000000000003 R09: ffff8102036613e0 R10: 0000000000000002 R11: ffffffff8061474c R12: ffff8102035bf828 R13: 0000000000000008 R14: ffff81020348ece8 R15: ffffc20002cb2000 FS: 0000000000000000(0000) GS:ffff810405025700(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 000000000000001a CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff810405094000, task ffff8102050b28c0) Stack: 000000010000000c 0002040000220400 0000001100000002 ffff81020348eda8 0000000000000001 ffff8102035f2cc0 0000000000000000 0000000000000000 0000000000000018 0000000000000000 0000000000000000 ffffffff80269ee8 Call Trace: <IRQ> [<ffffffff80269ee8>] ? handle_IRQ_event+0x25/0x53 [<ffffffff8026b393>] ? handle_fasteoi_irq+0x90/0xc8 [<ffffffff802218e2>] ? do_IRQ+0xf1/0x15f [<ffffffff8021df24>] ? default_idle+0x0/0x55 [<ffffffff8021f361>] ? ret_from_intr+0x0/0xa <EOI> [<ffffffff8023010c>] ? lapic_next_event+0x0/0xa [<ffffffff8021df55>] ? default_idle+0x31/0x55 [<ffffffff8021df50>] ? default_idle+0x2c/0x55 [<ffffffff8021df24>] ? default_idle+0x0/0x55 [<ffffffff8021e00b>] ? cpu_idle+0x92/0xb8 Code: 41 14 85 c0 89 44 24 14 0f 84 9d 02 00 00 f7 d0 01 d6 41 89 d5 89 41 14 8b 41 14 89 34 24 e9 7e 02 00 00 49 63 c5 49 8b 5c c6 48 <f6> 43 1a 80 4c 8b a3 20 37 00 00 0f 85 62 02 00 00 31 c9 41 83 RIP [<ffffffff806262c7>] mv_interrupt+0x21c/0x4cc RSP <ffff8102050bbec8> CR2: 000000000000001a ---[ end trace 2583b5f7a5350584 ]--- Kernel panic - not syncing: Aiee, killing interrupt handler! last_port already include port0 base. this patch change use last_port directly, and move pp assignment later. Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Some controllers (VIA CX700) raise device error on SETXFER even after mode configuration succeeded. Update ata_dev_set_mode() such that device error is ignored if transfer mode is configured correctly. To implement this, device is revalidated even after device error on SETXFER. This fixes kernel bugzilla bug 8563. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
The first port of cx700 is SATA. Fix cable detection. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Thomas Gleixner 提交于
pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kbuild: fix make V=1
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: selinux: support 64-bit capabilities
-
由 Andi Kleen 提交于
Without this patch a Opteron test system here oopses at boot with current git. Calling to_pci_dev() on a NULL pointer gives a negative value so the following NULL pointer check never triggers and then an illegal address is referenced. Check the unadjusted original device pointer for NULL instead. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-linus' of git://linux-nfs.org/~bfields/linux: SUNPRC: Fix printk format warning nfsd: clean up svc_reserve_auth() NLM: don't requeue block if it was invalidated while GRANT_MSG was in flight NLM: don't reattempt GRANT_MSG when there is already an RPC in flight NLM: have server-side RPC clients default to soft RPC tasks NLM: set RPC_CLNT_CREATE_NOPING for NLM RPC clients
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: remove stale comment from ide-lib.c ide: fix comment in init_irq() ide: ide_init_port() bugfix ide-disk: fix flush requests (take 2) ide: introduce CONFIG_BLK_DEV_IDEDMA_SFF option bast-ide: build fix ide-tape: remove never executed code ide: fix ide/legacy/gayle.c compilation ide-cd: replace ntohs with generic byteorder macro be16_to_cpu ide: remove stale version number pdc202xx_old: always enable burst mode palm_bk3710: use struct ide_port_info palm_bk3710: port initialization/probing bugfix palm_bk3710: fix ide_unregister() usage palm_bk3710: ide_register_hw() -> ide_device_add() ide: insert BUG_ON() into __ide_set_handler() (take 2) cs5520: remove stale comment ide: another possible ide panic fix for blk-end-request
-