The time ordering is generic for all kinds of events, so using generic
name 'ordered_events' for ordered_samples bool in perf_tool struct.

No functional change was intended.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-07mrqzcuhsks9wfmxrzsvemz@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The new ->add_entry_cb() will be called after an entry was added to
the histogram.  It's used for code sharing between perf report and
perf top.  Note that ops->add_*_entry() should set iter->he properly
in order to call the ->add_entry_cb.

Also pass @arg to the callback function.  It'll be used by perf top
later.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/87k393g999.fsf@sejong.aot.lge.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Add report.children config option for setting default value of
callchain accumulation.  It affects the report output only if
perf.data contains callchain info.

A user can write .perfconfig file like below to enable accumulation
by default:

  $ cat ~/.perfconfig
  [report]
  children = true

And it can be disabled through command line:

  $ perf report --no-children
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-17-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The --children option is for showing accumulated overhead (period)
value as well as self overhead.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-16-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Call __hists__add_entry() for each callchain node to get an
accumulated stat for an entry.  Introduce new cumulative_iter ops to
process them properly.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-6-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

There're some duplicate code when adding hist entries.  They are
different in that some have branch info or mem info but generally do
same thing.  So introduce new struct hist_entry_iter and add callbacks
to customize each case in general way.

The new perf_evsel__add_entry() function will look like:

  iter->prepare_entry();
  iter->add_single_entry();

  while (iter->next_entry())
    iter->add_next_entry();

  iter->finish_entry();

This will help further work like the cumulative callchain patchset.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1401335910-16832-3-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

There're some duplicate code for counting number of samples.  Add
hists__inc_nr_samples() and reuse it.
Suggested-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1401335910-16832-2-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The -F/--fields option is to allow user setup output field in any
order.  It can receive any sort keys and following (hpp) fields:

  overhead, overhead_sys, overhead_us, sample and period

If guest profiling is enabled, overhead_guest_{sys,us} will be
available too.

The output fields also affect sort order unless you give -s/--sort
option.  And any keys specified on -s option, will also be added to
the output field list automatically.

  $ perf report -F sym,sample,overhead
  ...
  #                     Symbol       Samples  Overhead
  # ..........................  ............  ........
  #
    [.] __cxa_atexit                       2     2.50%
    [.] __libc_csu_init                    4     5.00%
    [.] __new_exitfn                       3     3.75%
    [.] _dl_check_map_versions             1     1.25%
    [.] _dl_name_match_p                   4     5.00%
    [.] _dl_setup_hash                     1     1.25%
    [.] _dl_sysdep_start                   1     1.25%
    [.] _init                              5     6.25%
    [.] _setjmp                            6     7.50%
    [.] a                                  8    10.00%
    [.] b                                  8    10.00%
    [.] brk                                1     1.25%
    [.] c                                  8    10.00%

Note that, the example output above is captured after applying next
patch which fixes sort/comparing behavior.
Requested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-12-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

So that it can be set properly prior to set up output fields.  That
makes easy to handle/warn errors during the setup since it doesn't
need to be bothered with the GUI.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-11-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The perf uses different default sort orders for different use-cases,
and this was scattered throughout the code.  Add get_default_sort_
order() function to handle this and change initial value of sort_order
to NULL to distinguish it from user-given one.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1400480762-22852-10-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Add overhead{,_sys,_us,_guest_sys,_guest_us}, sample and period sort
keys so that they can be selected with --sort/-s option.

  $ perf report -s period,comm --stdio
  ...
  # Overhead        Period          Command
  # ........  ............  ...............
  #
      47.06%           152          swapper
      13.93%            45  qemu-system-arm
      12.38%            40         synergys
       3.72%            12          firefox
       2.48%             8            xchat
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-9-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Currently, accounting each sample is done in multiple places - once
when adding them to the input tree, other when adding them to the
output tree.  It's not only confusing but also can cause a subtle
problem since concurrent processing like in perf top might see the
updated stats before adding entries into the output tree - like seeing
more (blank) lines at the end and/or slight inaccurate percentage.

To fix this, only account the entries when it's moved into the output
tree so that they cannot be seen prematurely.  There're some
exceptional cases here and there - they should be addressed separately
with comments.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398327843-31845-7-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The hists->nr_entries is counted in multiple places so that they can
confuse readers of the code.  This is a preparation of later change
and do not intend any functional difference.

Note that report__collapse_hists() now changed to return nothing since
its return value (nr_samples) is only for checking if there's any data
in the input file and this can be acheived by checking ->nr_entries.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398327843-31845-2-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

This takes the parse_callchain_opt function and copies it into the
callchain.c file.  Now the c2c tool can use it too without duplicating.

Update perf-report to use the new routine too.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1396896924-129847-5-git-send-email-dzickus@redhat.com
[ Adding missing braces to multiline if condition ]
Signed-off-by: NJiri Olsa <jolsa@redhat.com>

The --percentage option is for controlling overhead percentage
displayed.  It can only receive either of "relative" or "absolute".
Move the parser callback function into a common location since it's
used by multiple commands now.

For more information, please see previous commit same thing done to
"perf report".
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-4-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

The --percentage option is for controlling overhead percentage
displayed.  It can only receive either of "relative" or "absolute".

"relative" means it's relative to filtered entries only so that the
sum of shown entries will be always 100%.  "absolute" means it retains
the original value before and after the filter is applied.

  $ perf report -s comm
  # Overhead       Command
  # ........  ............
  #
      74.19%           cc1
       7.61%           gcc
       6.11%            as
       4.35%            sh
       4.14%          make
       1.13%        fixdep
  ...

  $ perf report -s comm -c cc1,gcc --percentage absolute
  # Overhead       Command
  # ........  ............
  #
      74.19%           cc1
       7.61%           gcc

  $ perf report -s comm -c cc1,gcc --percentage relative
  # Overhead       Command
  # ........  ............
  #
      90.69%           cc1
       9.31%           gcc

Note that it has zero effect if no filter was applied.
Suggested-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-3-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

When filtering by thread, dso or symbol on TUI it also update total
period so that the output shows different result than no filter - the
percentage changed to relative to filtered entries only.  Sometimes
this is not desired since users might expect same results with filter.

So new filtered_* fields to hists->stats to count them separately.
They'll be controlled/used by user later.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-2-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

Since we introduced the ui__has_annotation() for that, don't open code
it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1395124359-11744-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I.e. don't drop al->filtered entries, create the hist_entries and use
its ->filtered bitmap, that is kept with the same semantics for its
bitmap, leaving the filtering to be done at the hist_entry level, i.e.
in the UIs.

This will allow zooming in/out the filters.
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-xeyhkepu7plw716lrtb0zlnu@git.kernel.org
[ yanked this out of a previous patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The TUI of perf report and top support annotation, but stdio and GTK
don't.  So it should be checked before calling hist_entry__inc_addr_
samples() to avoid wasting resources that will never be used.

perf annotate need it regardless of UI and sort keys, so the check
of whether to allocate resources should be on the tools that have
annotate as an option in the TUI, 'report' and 'top', not on the
function called by all of them.

It caused perf annotate on ppc64 to produce zero output, since the
buckets were not being allocated.
Reported-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392859976-32760-1-git-send-email-namhyung@kernel.org
[ Renamed (report,top)__needs_annotate() to ui__has_annotation() ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since all it wants is to get the 'struct record' from the received
'struct perf_tool', and this is already done at the callers of these
functions, short circuit it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xz8p659sjpad396vye5t24gx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since two of the parameters come from the same 'struct
addr_location', rename machine__resolve_bstack() to sample__resolve_bstack()
and pass the that addr_location instead.

This is also for consistency with the same change that resulted in the
sample__resolve_mem() function.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-99ecqt8jiyyksiyx3se7l5ia@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since three of the parameters come from the same 'struct addr_location',
rename machine__resolve_mem() to sample__resolve_mem() and pass the
that addr_location instead.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3f5otpssefh9l5hi1t259h8n@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We don't need to recalculate cpumode from the perf_event->header field,
as this is already available in the struct addr_location->cpumode field.

Remove the function signature of functions that receive both perf_event
and addr_location parameters but use perf_event just to extract the
cpumode.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tmct07y7mka54allj82trlnx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The report__resolve_callchain() can be shared with perf top code as it
doesn't really depend on the perf report code.  Factor it out as
sample__resolve_callchain().  The same goes to the hist_entry__append_
callchain() too.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rodrigo Campos <rodrigo@sdfg.com.ar>
Link: http://lkml.kernel.org/r/1389677157-30513-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For the common evsel list traversal, so that it becomes more compact.

Use the opportunity to start ditching the 'perf_' from 'perf_evlist__',
as discussed, as the whole conversion touches a lot of places, lets do
it piecemeal when we have the chance due to other work, like in this
case.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qnkx7dzm2h6m6uptkfk03ni6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Further uncluttering the main 'report' function by group related code in
separate function.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b594zsbwke8khir13kudwqmj@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To unclutter the main function.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-agvxwpazlucy6h5sejuttw9t@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Its too big, better have a separate function for it so that the main
logic gets shorter/clearer.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ahh6vfzyh8fsygjwrsbroeu0@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Move those print functions under "if (use_browser == 0)" so that they
don't interfere with TUI output.

Maybe they can handle other UIs later.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1387516278-17024-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There're some places printing messages to stdout/err directly.

It should be converted to use proper error printing functions instead.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1387516278-17024-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The addr_location struct should fully qualify an address, and to do that
it should have in it the machine where the thread was found.

Thus all functions that receive an addr_location now don't need to also
receive a 'machine', those functions just need to access al->machine
instead, just like it does with the other parts of an address location:
al->thread, al->map, etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o51iiee7vyq4r3k362uvuylg@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Reduce typing, functions use class__method convention, so unlikely to
clash with other libraries.

This actually was discussed in the "Link:" referenced message below.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Continuing to try to remove the code duplication introduced with mem and
branch hist entry code, this time providing prologue and epilogues to
deal with callchains when processing samples.
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-js3pour59yk2aibqzb1tpumh@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since there are three calls that could receive just the struct
addr_map_symbol pointer and call the symbol method.
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d728gz1orgkaknac9ppnzd9e@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since now symbol__addr_inc_samples() does the auto alloc, no need to do
it prior to calling hist_entry__inc_addr_samples.
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6ife7xq2kef1nn017m04b3id@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Instead of open coding it in multiple places in 'report' and 'top'.
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ay1ushp57qsva9aw59rha5ve@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently the perf.data header is always displayed for stdio output,
which is no always useful.

Disabling header information by default and adding following options to
control header output:

  --header      - display header information (old default)
  --header-only - display header information only w/o further
                  processing, forces stdio output
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386583370-1699-2-git-send-email-jolsa@redhat.com
[ Added single line explaining talking about the new --header* options,
  to address David Ahern comment; better man page entry for the new options,
  from Namhyung Kim ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The __hists__add_{branch,mem}_entry() does almost the same thing that
__hists__add_entry() does.  Consolidate them into one.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383202576-28141-2-git-send-email-namhyung@kernel.org
[ Fixup clash with new COMM infrastructure ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The -s (--sort) option was processed after normal option parsing so that
it cannot call the parse_options_usage() automatically.  Currently it
calls usage_with_options() which shows entire help messages for event
option.  Fix it by showing just -s options.

  $ perf report -s help
    Error: Unknown --sort key: `help'

   usage: perf report [<options>]

      -s, --sort <key[,key2...]>
                            sort by key(s): pid, comm, dso, symbol, ...
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Enthusiastically-Supported-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383291195-24386-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>