- 15 9月, 2008 1 次提交
-
-
由 Alex Nixon 提交于
They were already called once in arch/x86/kernel/setup.c - we don't need to call them again. fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11485Signed-off-by: NAlex Nixon <alex.nixon@citrix.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 8月, 2008 2 次提交
-
-
由 Jan Beulich 提交于
early_io{re,un}map() are __init and hence can't be called from __meminit functions. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
While I don't have a hotplug capable system at hand, I think two issues need fixing: - pud_phys (in kernel_physical_ampping_init()) would remain uninitialized in the after_bootmem case - the locking done just around phys_pmd_{init,update}() would leave out pgd updates, and it was needlessly covering code portions that do allocations (perhaps using a more friendly gfp value in alloc_low_page() would then be possible) Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 8月, 2008 4 次提交
-
-
All kernel mappings like ioremap(), etc uses UC_MINUS as the type. /dev/mem mappings with /dev/mem being opened with O_SYNC however was using UC, resulting in a conflict with /dev/mem mmap failing. This seems to be affecting some apps (one being flashrom) which are using O_SYNC and which were working before. Switch /dev/mem with O_SYNC also to UC_MINUS. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Big thinko in pat memtype tracking code. reserve_memtype should be called with physical address and not virtual address. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Marcin Slusarz 提交于
WARNING: vmlinux.o(.text+0x180af): Section mismatch in reference from the function leave_uniprocessor() to the function .cpuinit.text:cpu_up() The function leave_uniprocessor() references the function __cpuinit cpu_up(). This is often because leave_uniprocessor lacks a __cpuinit annotation or the annotation of cpu_up is wrong. leave_uniprocessor calls cpu_up only when CONFIG_HOTPLUG_CPU is set, so it can be safely annotated as __ref Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Cc: Pekka Paalanen <pq@iki.fi> Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@elte.hu> Cc: Pekka Paalanen <pq@iki.fi>
-
由 Arjan van de Ven 提交于
Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes part of the warning section for better reporting/collection. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Cc: akpm@linux-foundation.org Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 8月, 2008 1 次提交
-
-
由 Venki Pallipadi 提交于
Rene Herman reported significant Xorg startup/shutdown slowdown due to PAT. It turns out that the memtype list has thousands of entries. Add cached_entry to list add routine, in order to speed up the lookup for sequential reserve_memtype calls. Reported-by: NRene Herman <rene.herman@keyaccess.nl> Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 8月, 2008 2 次提交
-
-
由 Marcin Slusarz 提交于
WARNING: vmlinux.o(.text+0x17a3e): Section mismatch in reference from the function set_pte_vaddr_pud() to the function .init.text:spp_getpage() The function set_pte_vaddr_pud() references the function __init spp_getpage(). This is often because set_pte_vaddr_pud lacks a __init annotation or the annotation of spp_getpage is wrong. spp_getpage is called from __init (__init_extra_mapping) and non __init (set_pte_vaddr_pud) functions, so it can't be __init. Unfortunately it calls alloc_bootmem_pages which is __init, but does it only when bootmem allocator is available (after_bootmem == 0). So annotate it accordingly. Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com>
-
由 Andi Kleen 提交于
Jean Delvare's machine triggered this BUG acpi_os_map_memory phys ffff0000 size 65535 ------------[ cut here ]------------ kernel BUG at arch/x86/mm/pat.c:233! with ACPI in the backtrace. Adding some debugging output showed that ACPI calls acpi_os_map_memory phys ffff0000 size 65535 And ioremap/PAT does this check in 32bit, so addr+size wraps and the BUG in reserve_memtype() triggers incorrectly. BUG_ON(start >= end); /* end is exclusive */ But reserve_memtype already uses u64: int reserve_memtype(u64 start, u64 end, so the 32bit truncation must happen in the caller. Presumably in ioremap when it passes this information to reserve_memtype(). This patch does this computation in 64bit. http://bugzilla.kernel.org/show_bug.cgi?id=11346Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
- 15 8月, 2008 1 次提交
-
-
由 Hugh Dickins 提交于
Do we actually want these DirectMap lines in the x86 /proc/meminfo? I can see they're interesting to CPA developers and TLB optimizers, but they don't fit its usual "where has all my memory gone?" usage. If they are to stay, here are some fixes. 1. On x86_32 without PAE, they're not 2M but 4M pages: no need to mess with the internal enum, but show the right name to users. 2. Many machines can never show anything but 0 for DirectMap1G, so suppress that line unless direct_gbpages are really enabled. 3. The unit in /proc/meminfo is kB not number of pages: HugePages messed that up, but they're an example to regret not to follow. 4. Once we use kB, it's easy to see that 1GB has gone missing (which explains why CONFIG_CPA_DEBUG=y soon wraps DirectMap2M negative): because head_64.S's level2_ident_pgt entries were not counted. My fix is not ideal, but works for more and for less than 1G, and avoids interfering with early bootup pagetable contortions. Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 8月, 2008 2 次提交
-
-
由 Yinghai Lu 提交于
so we don't get warning on 32bit system with 64g RAM or more Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arjan van de Ven 提交于
Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes part of the warning section for better reporting/collection. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 8月, 2008 2 次提交
-
-
由 Rusty Russell 提交于
Out of line get_user_pages_fast fallback implementation, make it a weak symbol, get rid of CONFIG_HAVE_GET_USER_PAGES_FAST. Export the symbol to modules so lguest can use it. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Jeremy Fitzhardinge 提交于
Simon Horman reported that gcc-3.4.x crashes when compiling pgd_prepopulate_pmd() when PREALLOCATED_PMDS == 0 and CONFIG_DEBUG_INFO is enabled. Adding an extra check for PREALLOCATED_PMDS == 0 [which is compiled out by gcc] seems to avoid the problem. Reported-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 29 7月, 2008 1 次提交
-
-
由 Linus Torvalds 提交于
Alexey Dobriyan reported trouble with LTP with the new fast-gup code, and Johannes Weiner debugged it to non-page-aligned addresses, where the new get_user_pages_fast() code would do all the wrong things, including just traversing past the end of the requested area due to 'addr' never matching 'end' exactly. This is not a pretty fix, and we may actually want to move the alignment into generic code, leaving just the core code per-arch, but Alexey verified that the vmsplice01 LTP test doesn't crash with this. Reported-and-tested-by: NAlexey Dobriyan <adobriyan@gmail.com> Debugged-by: NJohannes Weiner <hannes@saeurebad.de> Cc: Nick Piggin <npiggin@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 7月, 2008 3 次提交
-
-
由 Johannes Weiner 提交于
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - pages in swapcache, printed by show_swap_cache_info() - dirty pages, writeback pages, mapped pages, slab pages, pagetable pages, printed by show_free_areas() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: NJohannes Weiner <hannes@saeurebad.de> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Implement get_user_pages_fast without locking in the fastpath on x86. Do an optimistic lockless pagetable walk, without taking mmap_sem or any page table locks or even mmap_sem. Page table existence is guaranteed by turning interrupts off (combined with the fact that we're always looking up the current mm, means we can do the lockless page table walk within the constraints of the TLB shootdown design). Basically we can do this lockless pagetable walk in a similar manner to the way the CPU's pagetable walker does not have to take any locks to find present ptes. This patch (combined with the subsequent ones to convert direct IO to use it) was found to give about 10% performance improvement on a 2 socket 8 core Intel Xeon system running an OLTP workload on DB2 v9.5 "To test the effects of the patch, an OLTP workload was run on an IBM x3850 M2 server with 2 processors (quad-core Intel Xeon processors at 2.93 GHz) using IBM DB2 v9.5 running Linux 2.6.24rc7 kernel. Comparing runs with and without the patch resulted in an overall performance benefit of ~9.8%. Correspondingly, oprofiles showed that samples from __up_read and __down_read routines that is seen during thread contention for system resources was reduced from 2.8% down to .05%. Monitoring the /proc/vmstat output from the patched run showed that the counter for fast_gup contained a very high number while the fast_gup_slow value was zero." (fast_gup is the old name for get_user_pages_fast, fast_gup_slow is a counter we had for the number of times the slowpath was invoked). The main reason for the improvement is that DB2 has multiple threads each issuing direct-IO. Direct-IO uses get_user_pages, and thus the threads contend the mmap_sem cacheline, and can also contend on page table locks. I would anticipate larger performance gains on larger systems, however I think DB2 uses an adaptive mix of threads and processes, so it could be that thread contention remains pretty constant as machine size increases. In which case, we stuck with "only" a 10% gain. The downside of using get_user_pages_fast is that if there is not a pte with the correct permissions for the access, we end up falling back to get_user_pages and so the get_user_pages_fast is a bit of extra work. However this should not be the common case in most performance critical code. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: Kconfig fix] [akpm@linux-foundation.org: Makefile fix/cleanup] [akpm@linux-foundation.org: warning fix] Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Reviewed-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 7月, 2008 6 次提交
-
-
由 Andi Kleen 提交于
Add an hugepagesz=... option similar to IA64, PPC etc. to x86-64. This finally allows to select GB pages for hugetlbfs in x86 now that all the infrastructure is in place. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Acked-by: NAdam Litke <agl@us.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Straight forward extensions for huge pages located in the PUD instead of PMDs. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
The goal of this patchset is to support multiple hugetlb page sizes. This is achieved by introducing a new struct hstate structure, which encapsulates the important hugetlb state and constants (eg. huge page size, number of huge pages currently allocated, etc). The hstate structure is then passed around the code which requires these fields, they will do the right thing regardless of the exact hstate they are operating on. This patch adds the hstate structure, with a single global instance of it (default_hstate), and does the basic work of converting hugetlb to use the hstate. Future patches will add more hstate structures to allow for different hugetlbfs mounts to have different page sizes. [akpm@linux-foundation.org: coding-style fixes] Acked-by: NAdam Litke <agl@us.ibm.com> Acked-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rik van Riel 提交于
In order to be able to debug things like the X server and programs using the PPC Cell SPUs, the debugger needs to be able to access device memory through ptrace and /proc/pid/mem. This patch: Add the generic_access_phys access function and put the hooks in place to allow access_process_vm to access device or PPC Cell SPU memory. [riel@redhat.com: Add documentation for the vm_ops->access function] Signed-off-by: NRik van Riel <riel@redhat.com> Signed-off-by: NBenjamin Herrensmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Hugh Dickins <hugh@veritas.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
There are a lot of places that define either a single bootmem descriptor or an array of them. Use only one central array with MAX_NUMNODES items instead. Signed-off-by: NJohannes Weiner <hannes@saeurebad.de> Acked-by: NRalf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 7月, 2008 3 次提交
-
-
由 Jeremy Fitzhardinge 提交于
PTE_PFN_MASK was getting lonely, so I made it a friend. Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
Rusty, in his peevish way, complained that macros defining constants should have a name which somewhat accurately reflects the actual purpose of the constant. Aside from the fact that PTE_MASK gives no clue as to what's actually being masked, and is misleadingly similar to the functionally entirely different PMD_MASK, PUD_MASK and PGD_MASK, I don't really see what the problem is. But if this patch silences the incessent noise, then it will have achieved its goal (TODO: write test-case). Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
There are a couple of places where (P)Dprintk is used which is an old compile time enabled printk wrapper. Convert it to the generic pr_debug(). Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 20 7月, 2008 1 次提交
-
-
由 Ingo Molnar 提交于
From: Arjan van de Ven <arjan@infradead.org> Date: Sat, 19 Jul 2008 15:47:17 -0700 CONFIG_NONPROMISC_DEVMEM was a rather confusing name - but renaming it to CONFIG_PROMISC_DEVMEM causes problems on architectures that do not support this feature; this patch renames it to CONFIG_STRICT_DEVMEM, so that architectures can opt-in into it. ( the polarity of the option is still the same as it was originally; it needs to be for now to not break architectures that don't have the infastructure yet to support this feature) Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Cc: "V.Radhakrishnan" <rk@atr-labs.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> ---
-
- 19 7月, 2008 1 次提交
-
-
Add a debugfs interface to list out all the PAT memtype reservations. Appears at debugfs x86/pat_memtype_list and output format is type @ <start addr>-<end addr> We do not hold the lock while printing the entire list. So, the list may not be a consistent copy in case where regions are getting added or deleted at the same time. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 18 7月, 2008 3 次提交
-
-
由 Yinghai Lu 提交于
only supports memory below max_low_pfn. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
it's separate functionality that deserves its own file. This also prepares 32-bit memtest support. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Linus observed: > The real bug is that we shouldn't have "double negatives", and > certainly not negative config options. Making that "promiscuous > /dev/mem" option a negated thing as a config option was bad. right ... lets rename this option. There should never be a negation in config options. [ that reminds me of CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER, but that is for another commit ;-) ] Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 7月, 2008 2 次提交
-
-
由 Bob Moore 提交于
Synchronized tables with current specifications. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Jack Steiner 提交于
Fix bug in kernel_physical_mapping_init() that causes kernel page table to be built incorrectly for systems with greater than 512GB of memory. Signed-off-by: NJack Steiner <steiner@sgi.com> Cc: linux-mm@kvack.org Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 7月, 2008 1 次提交
-
-
由 Eduardo Habkost 提交于
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 7月, 2008 2 次提交
-
-
由 Yinghai Lu 提交于
optimization: try to merge the range with same page size in init_memory_mapping, to get the best possible linear mappings set up. thus when GBpages is not there, we could do 2M pages. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
tighten the boundary checks around max_low_pfn_mapped - dont overmap nor undermap into holes. also print out tseg for AMD cpus, for diagnostic purposes. (this is an SMM area, and we split up any big mappings around that area) Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 7月, 2008 2 次提交
-
-
由 Yinghai Lu 提交于
when more than 4g memory is installed, don't map the big hole below 4g. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
save the SLIT, in case we are using fixmap to read it, and that fixmap could be cleared by others. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-