We ran into a funky issue, where someone doing 256K buffered reads saw
128K requests at the device level.  Turns out it is read-ahead capping
the request size, since we use 128K as the default setting.  This
doesn't make a lot of sense - if someone is issuing 256K reads, they
should see 256K reads, regardless of the read-ahead setting, if the
underlying device can support a 256K read in a single command.

This patch introduces a bdi hint, io_pages.  This is the soft max IO
size for the lower level, I've hooked it up to the bdev settings here.
Read-ahead is modified to issue the maximum of the user request size,
and the read-ahead max size, but capped to the max request size on the
device side.  The latter is done to avoid reading ahead too much, if the
application asks for a huge read.  With this patch, the kernel behaves
like the application expects.

Link: http://lkml.kernel.org/r/1479498073-8657-1-git-send-email-axboe@fb.comSigned-off-by: NJens Axboe <axboe@fb.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Compiling shmem.c with SHMEM and TRANSAPRENT_HUGE_PAGECACHE enabled
raises warnings on two unused functions when CONFIG_TMPFS and
CONFIG_SYSFS are both disabled:

  mm/shmem.c:390:20: warning: `shmem_format_huge' defined but not used [-Wunused-function]
   static const char *shmem_format_huge(int huge)
                      ^~~~~~~~~~~~~~~~~
  mm/shmem.c:373:12: warning: `shmem_parse_huge' defined but not used [-Wunused-function]
   static int shmem_parse_huge(const char *str)
               ^~~~~~~~~~~~~~~~

A conditional compilation on tmpfs or sysfs removes the warnings.

Link: http://lkml.kernel.org/r/20161118055749.11313-1-jeremy.lefaure@lse.epita.frSigned-off-by: NJérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Acked-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

b_more_io non-empty check is already preceded by an opposite check.

Link: http://lkml.kernel.org/r/1478591249-30641-1-git-send-email-tahsin@google.comSigned-off-by: NTahsin Erdogan <tahsin@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Unlike THP, hugetlb pages are represented by one entry in the
radix-tree.

[akpm@linux-foundation.org: tweak comment]
Link: http://lkml.kernel.org/r/20161110163640.126124-1-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The header uses types and definitions from the linux/init.h as well as
linux/types.h headers without explicitly including them.  This causes a
failure to compile if they are not implicitly pulled in by includers.

Link: http://lkml.kernel.org/r/20161115133235.13387-1-thierry.reding@gmail.comSigned-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mark dax vmas as not migratable to exclude them from task_numa_work().
This is especially relevant for device-dax which wants to ensure
predictable access latency and not incur periodic faults.

[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/147892450132.22062.16875659431109209179.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Reported-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Having code for the pkey_mprotect, pkey_alloc and pkey_free system calls
makes only sense if ARCH_HAS_PKEYS is selected.  If not selected these
system calls will always return -ENOSPC or -EINVAL.

To simplify things and have less code generate the pkey system call code
only if ARCH_HAS_PKEYS is selected.

For architectures which have already wired up the system calls, but do
not select ARCH_HAS_PKEYS this will result in less generated code and a
different return code: the three system calls will now always return
-ENOSYS, using the cond_syscall mechanism.

For architectures which have not wired up the system calls less
unreachable code will be generated.

Link: http://lkml.kernel.org/r/20161114111251.70084-1-heiko.carstens@de.ibm.comSigned-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Summarize the "hotpluggable" property of dt memory nodes.

Link: http://lkml.kernel.org/r/1479160961-25840-6-git-send-email-arbab@linux.vnet.ibm.comSigned-off-by: NReza Arbab <arbab@linux.vnet.ibm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alistair Popple <apopple@au1.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When movable nodes are enabled, any node containing only hotpluggable
memory is made movable at boot time.

On x86, hotpluggable memory is discovered by parsing the ACPI SRAT,
making corresponding calls to memblock_mark_hotplug().

If we introduce a dt property to describe memory as hotpluggable,
configs supporting early fdt may then also do this marking and use
movable nodes.

Link: http://lkml.kernel.org/r/1479160961-25840-5-git-send-email-arbab@linux.vnet.ibm.comSigned-off-by: NReza Arbab <arbab@linux.vnet.ibm.com>
Tested-by: NBalbir Singh <bsingharora@gmail.com>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alistair Popple <apopple@au1.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To support movable memory nodes (CONFIG_MOVABLE_NODE), at least one of
the following must be true:

1. This config has the capability to identify movable nodes at boot.
   Right now, only x86 can do this.

2. Our config supports memory hotplug, which means that a movable node
   can be created by hotplugging all of its memory into ZONE_MOVABLE.

Fix the Kconfig definition of CONFIG_MOVABLE_NODE, which currently
recognizes (1), but not (2).

Link: http://lkml.kernel.org/r/1479160961-25840-4-git-send-email-arbab@linux.vnet.ibm.comSigned-off-by: NReza Arbab <arbab@linux.vnet.ibm.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alistair Popple <apopple@au1.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit c5320926 ("mem-hotplug: introduce movable_node boot
option"), the memblock allocation direction is changed to bottom-up and
then back to top-down like this:

1. memblock_set_bottom_up(true), called by cmdline_parse_movable_node().
2. memblock_set_bottom_up(false), called by x86's numa_init().

Even though (1) occurs in generic mm code, it is wrapped by #ifdef
CONFIG_MOVABLE_NODE, which depends on X86_64.

This means that when we extend CONFIG_MOVABLE_NODE to non-x86 arches,
things will be unbalanced.  (1) will happen for them, but (2) will not.

This toggle was added in the first place because x86 has a delay between
adding memblocks and marking them as hotpluggable.  Since other arches
do this marking either immediately or not at all, they do not require
the bottom-up toggle.

So, resolve things by moving (1) from cmdline_parse_movable_node() to
x86's setup_arch(), immediately after the movable_node parameter has
been parsed.

Link: http://lkml.kernel.org/r/1479160961-25840-3-git-send-email-arbab@linux.vnet.ibm.comSigned-off-by: NReza Arbab <arbab@linux.vnet.ibm.com>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alistair Popple <apopple@au1.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "enable movable nodes on non-x86 configs", v7.

This patchset allows more configs to make use of movable nodes.  When
CONFIG_MOVABLE_NODE is selected, there are two ways to introduce such
nodes into the system:

1. Discover movable nodes at boot. Currently this is only possible on
   x86, but we will enable configs supporting fdt to do the same.

2. Hotplug and online all of a node's memory using online_movable. This
   is already possible on any config supporting memory hotplug, not
   just x86, but the Kconfig doesn't say so. We will fix that.

We'll also remove some cruft on power which would prevent (2).

This patch (of 5):

Remove the check which prevents us from hotplugging into an empty node.

The original commit b226e462 ("[PATCH] powerpc: don't add memory to
empty node/zone"), states that this was intended to be a temporary measure.
It is a workaround for an oops which no longer occurs.

Link: http://lkml.kernel.org/r/1479160961-25840-2-git-send-email-arbab@linux.vnet.ibm.comSigned-off-by: NReza Arbab <arbab@linux.vnet.ibm.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alistair Popple <apopple@au1.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The MPOL_F_STATIC_NODES and MPOL_F_RELATIVE_NODES flags are irrelevant
when setting them for MPOL_LOCAL NUMA memory policy via set_mempolicy or
mbind.

Return the "invalid argument" from set_mempolicy and mbind whenever any
of these flags is passed along with MPOL_LOCAL.

It is consistent with MPOL_PREFERRED passed with empty nodemask.

It slightly shortens the execution time in paths where these flags are
used e.g.  when trying to rebind the NUMA nodes for changes in cgroups
cpuset mems (mpol_rebind_preferred()) or when just printing the mempolicy
structure (/proc/PID/numa_maps).  Isolated tests done.

Link: http://lkml.kernel.org/r/20161027163037.4089-1-kwapulinski.piotr@gmail.comSigned-off-by: NPiotr Kwapulinski <kwapulinski.piotr@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Liang Chen <liangchen.linux@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the previous round of get_user_pages* changes comments attached to
__get_user_pages_unlocked() and get_user_pages_unlocked() were rendered
incorrect, this patch corrects them.

In addition the get_user_pages_unlocked() comment seems to have already
been outdated as it referred to tsk, mm parameters which were removed in
c12d2da5 ("mm/gup: Remove the macro overload API migration helpers from
the get_user*() APIs"), this patch fixes this also.

Link: http://lkml.kernel.org/r/20161025233435.5338-1-lstoakes@gmail.comSigned-off-by: NLorenzo Stoakes <lstoakes@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that we check for page size change early in the loop, we can
partially revert e9d55e15 ("mm: change the interface for
__tlb_remove_page").

This simplies the code much, by removing the need to track the last
address with which we adjusted the range.  We also go back to the older
way of filling the mmu_gather array, ie, we add an entry and then check
whether the gather batch is full.

Link: http://lkml.kernel.org/r/20161026084839.27299-6-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With commit e77b0852 ("mm/mmu_gather: track page size with mmu
gather and force flush if page size change") we added the ability to
force a tlb flush when the page size change in a mmu_gather loop.  We
did that by checking for a page size change every time we added a page
to mmu_gather for lazy flush/remove.  We can improve that by moving the
page size change check early and not doing it every time we add a page.

This also helps us to do tlb flush when invalidating a range covering
dax mapping.  Wrt dax mapping we don't have a backing struct page and
hence we don't call tlb_remove_page, which earlier forced the tlb flush
on page size change.  Moving the page size change check earlier means we
will do the same even for dax mapping.

We also avoid doing this check on architecture other than powerpc.

In a later patch we will remove page size check from tlb_remove_page().

Link: http://lkml.kernel.org/r/20161026084839.27299-5-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This add tlb_remove_hugetlb_entry similar to tlb_remove_pmd_tlb_entry.

Link: http://lkml.kernel.org/r/20161026084839.27299-4-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We use __tlb_adjust_range to update range convered by mmu_gather struct.
We later use the 'start' and 'end' to do a mmu_notifier_invalidate_range
in tlb_flush_mmu_tlbonly().  Update the 'end' correctly in
__tlb_adjust_range so that we call mmu_notifier_invalidate_range with
the correct range values.

Wrt tlbflush, this should not have any impact, because a flush with
correct start address will flush tlb mapping for the range.

Also add comment w.r.t updating the range when we free pagetable pages.
For now we don't support a range based page table cache flush.

Link: http://lkml.kernel.org/r/20161026084839.27299-3-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We are removing a pmd hugepage here.  Use the correct page size.

Link: http://lkml.kernel.org/r/20161026084839.27299-2-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After enabling -Wmaybe-uninitialized warnings, we get a false-postive
warning for shmem:

  mm/shmem.c: In function `shmem_getpage_gfp':
  include/linux/spinlock.h:332:21: error: `info' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This can be easily avoided, since the correct 'info' pointer is known at
the time we first enter the function, so we can simply move the
initialization up.  Moving it before the first label avoids the warning
and lets us remove two later initializations.

Note that the function is so hard to read that it not only confuses the
compiler, but also most readers and without this patch it could\ easily
break if one of the 'goto's changed.

Link: https://www.spinics.net/lists/kernel/msg2368133.html
Link: http://lkml.kernel.org/r/20161024205725.786455-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit bda807d4 ("mm: migrate: support non-lru movable page
migration") isolate_migratepages_block) can isolate !PageLRU pages which
would acct_isolated account as NR_ISOLATED_*.  Accounting these non-lru
pages NR_ISOLATED_{ANON,FILE} doesn't make any sense and it can misguide
heuristics based on those counters such as pgdat_reclaimable_pages resp.
too_many_isolated which would lead to unexpected stalls during the
direct reclaim without any good reason.  Note that
__alloc_contig_migrate_range can isolate a lot of pages at once.

On mobile devices such as 512M ram android Phone, it may use a big zram
swap.  In some cases zram(zsmalloc) uses too many non-lru but
migratedable pages, such as:

      MemTotal: 468148 kB
      Normal free:5620kB
      Free swap:4736kB
      Total swap:409596kB
      ZRAM: 164616kB(zsmalloc non-lru pages)
      active_anon:60700kB
      inactive_anon:60744kB
      active_file:34420kB
      inactive_file:37532kB

Fix this by only accounting lru pages to NR_ISOLATED_* in
isolate_migratepages_block right after they were isolated and we still
know they were on LRU.  Drop acct_isolated because it is called after
the fact and we've lost that information.  Batching per-cpu counter
doesn't make much improvement anyway.  Also make sure that we uncharge
only LRU pages when putting them back on the LRU in
putback_movable_pages resp.  when unmap_and_move migrates the page.

[mhocko@suse.com: replace acct_isolated() with direct counting]
Fixes: bda807d4 ("mm: migrate: support non-lru movable page migration")
Link: http://lkml.kernel.org/r/20161019080240.9682-1-mhocko@kernel.orgSigned-off-by: NMing Ling <ming.ling@spreadtrum.com>
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__GFP_THISNODE is documented to enforce the allocation to be satisified
from the requested node with no fallbacks or placement policy
enforcements.  policy_zonelist seemingly breaks this semantic if the
current policy is MPOL_MBIND and instead of taking the node it will
fallback to the first node in the mask if the requested one is not in
the mask.  This is confusing to say the least because it fact we
shouldn't ever go that path.  First tasks shouldn't be scheduled on CPUs
with nodes outside of their mempolicy binding.  And secondly
policy_zonelist is called only from 3 places:

 - huge_zonelist - never should do __GFP_THISNODE when going this path

 - alloc_pages_vma - which shouldn't depend on __GFP_THISNODE either

 - alloc_pages_current - which uses default_policy id __GFP_THISNODE is
   used

So we shouldn't even need to care about this possibility and can drop
the confusing code.  Let's keep a WARN_ON_ONCE in place to catch
potential users and fix them up properly (aka use a different allocation
function which ignores mempolicy).

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20161013125958.32155-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While doing MADV_DONTNEED on a large area of thp memory, I noticed we
encountered many unlikely() branches in profiles for each backing
hugepage.  This is because zap_pmd_range() would call split_huge_pmd(),
which rechecked the conditions that were already validated, but as part
of an unlikely() branch.

Avoid the unlikely() branch when in a context where pmd is known to be
good for __split_huge_pmd() directly.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1610181600300.84525@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Many seq_file helpers exist for simplifying implementation of virtual
files especially, for /proc nodes.  however, the helpers for iteration
over list_head are available but aren't adopted to implement
/proc/vmallocinfo currently.

Simplify /proc/vmallocinfo implementation by using existing seq_file
helpers.

Link: http://lkml.kernel.org/r/57FDF2E5.1000201@zoho.comSigned-off-by: Nzijun_hu <zijun_hu@htc.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, unreserve_highatomic_pageblock bails out if it found
highatomic pageblock regardless of really moving free pages from the one
so that it could mitigate unreserve logic's goal which saves OOM of a
process.

This patch makes unreserve functions bail out only if it moves some
pages out of !highatomic free list to avoid such false positive.

Another potential problem is that by race between page freeing and
reserve highatomic function, pages could be in highatomic free list even
though the pageblock is !high atomic migratetype.  In that case,
unreserve_highatomic_pageblock can be void if count of highatomic
reserve is less than pageblock_nr_pages.  We could solve it simply via
draining all of reserved pages before the OOM.  It would have a
safeguard role to exhuast reserved pages before converging to OOM.

Link: http://lkml.kernel.org/r/1476259429-18279-5-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Sangseok Lee <sangseok.lee@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I got OOM report from production team with v4.4 kernel.  It had enough
free memory but failed to allocate GFP_KERNEL order-0 page and finally
encountered OOM kill.  It occured during QA process which launches
several apps, switching and so on.  It happned rarely.  IOW, In normal
situation, it was not a problem but if we are unluck so that several
apps uses peak memory at the same time, it can happen.  If we manage to
pass the phase, the system can go working well.

I could reproduce it with my test(memory spike easily.  Look at below.

The reason is free pages(19M) of DMA32 zone are reserved for
HIGHORDERATOMIC and doesn't unreserved before the OOM.

  balloon invoked oom-killer: gfp_mask=0x24280ca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO), order=0, oom_score_adj=0
  balloon cpuset=/ mems_allowed=0
  CPU: 1 PID: 8473 Comm: balloon Tainted: G        W  OE   4.8.0-rc7-00219-g3f74c9559583-dirty #3161
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
  Call Trace:
    dump_stack+0x63/0x90
    dump_header+0x5c/0x1ce
    oom_kill_process+0x22e/0x400
    out_of_memory+0x1ac/0x210
    __alloc_pages_nodemask+0x101e/0x1040
    handle_mm_fault+0xa0a/0xbf0
    __do_page_fault+0x1dd/0x4d0
    trace_do_page_fault+0x43/0x130
    do_async_page_fault+0x1a/0xa0
    async_page_fault+0x28/0x30
  Mem-Info:
  active_anon:383949 inactive_anon:106724 isolated_anon:0
   active_file:15 inactive_file:44 isolated_file:0
   unevictable:0 dirty:0 writeback:24 unstable:0
   slab_reclaimable:2483 slab_unreclaimable:3326
   mapped:0 shmem:0 pagetables:1906 bounce:0
   free:6898 free_pcp:291 free_cma:0
  Node 0 active_anon:1535796kB inactive_anon:426896kB active_file:60kB inactive_file:176kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:0kB dirty:0kB writeback:96kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1418 all_unreclaimable? no
  DMA free:8188kB min:44kB low:56kB high:68kB active_anon:7648kB inactive_anon:0kB active_file:0kB inactive_file:4kB unevictable:0kB writepending:0kB present:15992kB managed:15908kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:20kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
  lowmem_reserve[]: 0 1952 1952 1952
  DMA32 free:19404kB min:5628kB low:7624kB high:9620kB active_anon:1528148kB inactive_anon:426896kB active_file:60kB inactive_file:420kB unevictable:0kB writepending:96kB present:2080640kB managed:2030092kB mlocked:0kB slab_reclaimable:9932kB slab_unreclaimable:13284kB kernel_stack:2496kB pagetables:7624kB bounce:0kB free_pcp:900kB local_pcp:112kB free_cma:0kB
  lowmem_reserve[]: 0 0 0 0
  DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 2*4096kB (H) = 8192kB
  DMA32: 7*4kB (H) 8*8kB (H) 30*16kB (H) 31*32kB (H) 14*64kB (H) 9*128kB (H) 2*256kB (H) 2*512kB (H) 4*1024kB (H) 5*2048kB (H) 0*4096kB = 19484kB
  51131 total pagecache pages
  50795 pages in swap cache
  Swap cache stats: add 3532405601, delete 3532354806, find 124289150/1822712228
  Free swap  = 8kB
  Total swap = 255996kB
  524158 pages RAM
  0 pages HighMem/MovableOnly
  12658 pages reserved
  0 pages cma reserved
  0 pages hwpoisoned

Another example exceeded the limit by the race is

  in:imklog: page allocation failure: order:0, mode:0x2280020(GFP_ATOMIC|__GFP_NOTRACK)
  CPU: 0 PID: 476 Comm: in:imklog Tainted: G            E   4.8.0-rc7-00217-g266ef83c51e5-dirty #3135
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
  Call Trace:
    dump_stack+0x63/0x90
    warn_alloc_failed+0xdb/0x130
    __alloc_pages_nodemask+0x4d6/0xdb0
    new_slab+0x339/0x490
    ___slab_alloc.constprop.74+0x367/0x480
    __slab_alloc.constprop.73+0x20/0x40
    __kmalloc+0x1a4/0x1e0
    alloc_indirect.isra.14+0x1d/0x50
    virtqueue_add_sgs+0x1c4/0x470
    __virtblk_add_req+0xae/0x1f0
    virtio_queue_rq+0x12d/0x290
    __blk_mq_run_hw_queue+0x239/0x370
    blk_mq_run_hw_queue+0x8f/0xb0
    blk_mq_insert_requests+0x18c/0x1a0
    blk_mq_flush_plug_list+0x125/0x140
    blk_flush_plug_list+0xc7/0x220
    blk_finish_plug+0x2c/0x40
    __do_page_cache_readahead+0x196/0x230
    filemap_fault+0x448/0x4f0
    ext4_filemap_fault+0x36/0x50
    __do_fault+0x75/0x140
    handle_mm_fault+0x84d/0xbe0
    __do_page_fault+0x1dd/0x4d0
    trace_do_page_fault+0x43/0x130
    do_async_page_fault+0x1a/0xa0
    async_page_fault+0x28/0x30
  Mem-Info:
  active_anon:363826 inactive_anon:121283 isolated_anon:32
   active_file:65 inactive_file:152 isolated_file:0
   unevictable:0 dirty:0 writeback:46 unstable:0
   slab_reclaimable:2778 slab_unreclaimable:3070
   mapped:112 shmem:0 pagetables:1822 bounce:0
   free:9469 free_pcp:231 free_cma:0
  Node 0 active_anon:1455304kB inactive_anon:485132kB active_file:260kB inactive_file:608kB unevictable:0kB isolated(anon):128kB isolated(file):0kB mapped:448kB dirty:0kB writeback:184kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:13641 all_unreclaimable? no
  DMA free:7748kB min:44kB low:56kB high:68kB active_anon:7944kB inactive_anon:104kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15908kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:108kB kernel_stack:0kB pagetables:4kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
  lowmem_reserve[]: 0 1952 1952 1952
  DMA32 free:30128kB min:5628kB low:7624kB high:9620kB active_anon:1447360kB inactive_anon:485028kB active_file:260kB inactive_file:608kB unevictable:0kB writepending:184kB present:2080640kB managed:2030132kB mlocked:0kB slab_reclaimable:11112kB slab_unreclaimable:12172kB kernel_stack:2400kB pagetables:7284kB bounce:0kB free_pcp:924kB local_pcp:72kB free_cma:0kB
  lowmem_reserve[]: 0 0 0 0
  DMA: 7*4kB (UE) 3*8kB (UH) 1*16kB (M) 0*32kB 2*64kB (U) 1*128kB (M) 1*256kB (U) 0*512kB 1*1024kB (U) 1*2048kB (U) 1*4096kB (H) = 7748kB
  DMA32: 10*4kB (H) 3*8kB (H) 47*16kB (H) 38*32kB (H) 5*64kB (H) 1*128kB (H) 2*256kB (H) 3*512kB (H) 3*1024kB (H) 3*2048kB (H) 4*4096kB (H) = 30128kB
  2775 total pagecache pages
  2536 pages in swap cache
  Swap cache stats: add 206786828, delete 206784292, find 7323106/106686077
  Free swap  = 108744kB
  Total swap = 255996kB
  524158 pages RAM
  0 pages HighMem/MovableOnly
  12648 pages reserved
  0 pages cma reserved
  0 pages hwpoisoned

It's weird to show that zone has enough free memory above min watermark
but OOMed with 4K GFP_KERNEL allocation due to reserved highatomic
pages.  As last resort, try to unreserve highatomic pages again and if
it has moved pages to non-highatmoc free list, retry reclaim once more.

Link: http://lkml.kernel.org/r/1476259429-18279-4-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Sangseok Lee <sangseok.lee@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is race between page freeing and unreserved highatomic.

 CPU 0				    CPU 1

    free_hot_cold_page
      mt = get_pfnblock_migratetype
      set_pcppage_migratetype(page, mt)
    				    unreserve_highatomic_pageblock
    				    spin_lock_irqsave(&zone->lock)
    				    move_freepages_block
    				    set_pageblock_migratetype(page)
    				    spin_unlock_irqrestore(&zone->lock)
      free_pcppages_bulk
        __free_one_page(mt) <- mt is stale

By above race, a page on CPU 0 could go non-highorderatomic free list
since the pageblock's type is changed.  By that, unreserve logic of
highorderatomic can decrease reserved count on a same pageblock severak
times and then it will make mismatch between nr_reserved_highatomic and
the number of reserved pageblock.

So, this patch verifies whether the pageblock is highatomic or not and
decrease the count only if the pageblock is highatomic.

Link: http://lkml.kernel.org/r/1476259429-18279-3-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Sangseok Lee <sangseok.lee@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "use up highorder free pages before OOM", v3.

I got OOM report from production team with v4.4 kernel.  It had enough
free memory but failed to allocate GFP_KERNEL order-0 page and finally
encountered OOM kill.  It occured during QA process which launches
several apps, switching and so on.  It happned rarely.  IOW, In normal
situation, it was not a problem but if we are unluck so that several
apps uses peak memory at the same time, it can happen.  If we manage to
pass the phase, the system can go working well.

I could reproduce it with my test(memory spike easily.  Look at below.

The reason is free pages(19M) of DMA32 zone are reserved for
HIGHORDERATOMIC and doesn't unreserved before the OOM.

  balloon invoked oom-killer: gfp_mask=0x24280ca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO), order=0, oom_score_adj=0
  balloon cpuset=/ mems_allowed=0
  CPU: 1 PID: 8473 Comm: balloon Tainted: G        W  OE   4.8.0-rc7-00219-g3f74c9559583-dirty #3161
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
  Call Trace:
    dump_stack+0x63/0x90
    dump_header+0x5c/0x1ce
    oom_kill_process+0x22e/0x400
    out_of_memory+0x1ac/0x210
    __alloc_pages_nodemask+0x101e/0x1040
    handle_mm_fault+0xa0a/0xbf0
    __do_page_fault+0x1dd/0x4d0
    trace_do_page_fault+0x43/0x130
    do_async_page_fault+0x1a/0xa0
    async_page_fault+0x28/0x30
  Mem-Info:
  active_anon:383949 inactive_anon:106724 isolated_anon:0
   active_file:15 inactive_file:44 isolated_file:0
   unevictable:0 dirty:0 writeback:24 unstable:0
   slab_reclaimable:2483 slab_unreclaimable:3326
   mapped:0 shmem:0 pagetables:1906 bounce:0
   free:6898 free_pcp:291 free_cma:0
  Node 0 active_anon:1535796kB inactive_anon:426896kB active_file:60kB inactive_file:176kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:0kB dirty:0kB writeback:96kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1418 all_unreclaimable? no
  DMA free:8188kB min:44kB low:56kB high:68kB active_anon:7648kB inactive_anon:0kB active_file:0kB inactive_file:4kB unevictable:0kB writepending:0kB present:15992kB managed:15908kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:20kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
  lowmem_reserve[]: 0 1952 1952 1952
  DMA32 free:19404kB min:5628kB low:7624kB high:9620kB active_anon:1528148kB inactive_anon:426896kB active_file:60kB inactive_file:420kB unevictable:0kB writepending:96kB present:2080640kB managed:2030092kB mlocked:0kB slab_reclaimable:9932kB slab_unreclaimable:13284kB kernel_stack:2496kB pagetables:7624kB bounce:0kB free_pcp:900kB local_pcp:112kB free_cma:0kB
  lowmem_reserve[]: 0 0 0 0
  DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 2*4096kB (H) = 8192kB
  DMA32: 7*4kB (H) 8*8kB (H) 30*16kB (H) 31*32kB (H) 14*64kB (H) 9*128kB (H) 2*256kB (H) 2*512kB (H) 4*1024kB (H) 5*2048kB (H) 0*4096kB = 19484kB
  51131 total pagecache pages
  50795 pages in swap cache
  Swap cache stats: add 3532405601, delete 3532354806, find 124289150/1822712228
  Free swap  = 8kB
  Total swap = 255996kB
  524158 pages RAM
  0 pages HighMem/MovableOnly
  12658 pages reserved
  0 pages cma reserved
  0 pages hwpoisoned

Another example exceeded the limit by the race is

  in:imklog: page allocation failure: order:0, mode:0x2280020(GFP_ATOMIC|__GFP_NOTRACK)
  CPU: 0 PID: 476 Comm: in:imklog Tainted: G            E   4.8.0-rc7-00217-g266ef83c51e5-dirty #3135
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
  Call Trace:
    dump_stack+0x63/0x90
    warn_alloc_failed+0xdb/0x130
    __alloc_pages_nodemask+0x4d6/0xdb0
    new_slab+0x339/0x490
    ___slab_alloc.constprop.74+0x367/0x480
    __slab_alloc.constprop.73+0x20/0x40
    __kmalloc+0x1a4/0x1e0
    alloc_indirect.isra.14+0x1d/0x50
    virtqueue_add_sgs+0x1c4/0x470
    __virtblk_add_req+0xae/0x1f0
    virtio_queue_rq+0x12d/0x290
    __blk_mq_run_hw_queue+0x239/0x370
    blk_mq_run_hw_queue+0x8f/0xb0
    blk_mq_insert_requests+0x18c/0x1a0
    blk_mq_flush_plug_list+0x125/0x140
    blk_flush_plug_list+0xc7/0x220
    blk_finish_plug+0x2c/0x40
    __do_page_cache_readahead+0x196/0x230
    filemap_fault+0x448/0x4f0
    ext4_filemap_fault+0x36/0x50
    __do_fault+0x75/0x140
    handle_mm_fault+0x84d/0xbe0
    __do_page_fault+0x1dd/0x4d0
    trace_do_page_fault+0x43/0x130
    do_async_page_fault+0x1a/0xa0
    async_page_fault+0x28/0x30
  Mem-Info:
  active_anon:363826 inactive_anon:121283 isolated_anon:32
   active_file:65 inactive_file:152 isolated_file:0
   unevictable:0 dirty:0 writeback:46 unstable:0
   slab_reclaimable:2778 slab_unreclaimable:3070
   mapped:112 shmem:0 pagetables:1822 bounce:0
   free:9469 free_pcp:231 free_cma:0
  Node 0 active_anon:1455304kB inactive_anon:485132kB active_file:260kB inactive_file:608kB unevictable:0kB isolated(anon):128kB isolated(file):0kB mapped:448kB dirty:0kB writeback:184kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:13641 all_unreclaimable? no
  DMA free:7748kB min:44kB low:56kB high:68kB active_anon:7944kB inactive_anon:104kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15908kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:108kB kernel_stack:0kB pagetables:4kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
  lowmem_reserve[]: 0 1952 1952 1952
  DMA32 free:30128kB min:5628kB low:7624kB high:9620kB active_anon:1447360kB inactive_anon:485028kB active_file:260kB inactive_file:608kB unevictable:0kB writepending:184kB present:2080640kB managed:2030132kB mlocked:0kB slab_reclaimable:11112kB slab_unreclaimable:12172kB kernel_stack:2400kB pagetables:7284kB bounce:0kB free_pcp:924kB local_pcp:72kB free_cma:0kB
  lowmem_reserve[]: 0 0 0 0
  DMA: 7*4kB (UE) 3*8kB (UH) 1*16kB (M) 0*32kB 2*64kB (U) 1*128kB (M) 1*256kB (U) 0*512kB 1*1024kB (U) 1*2048kB (U) 1*4096kB (H) = 7748kB
  DMA32: 10*4kB (H) 3*8kB (H) 47*16kB (H) 38*32kB (H) 5*64kB (H) 1*128kB (H) 2*256kB (H) 3*512kB (H) 3*1024kB (H) 3*2048kB (H) 4*4096kB (H) = 30128kB
  2775 total pagecache pages
  2536 pages in swap cache
  Swap cache stats: add 206786828, delete 206784292, find 7323106/106686077
  Free swap  = 108744kB
  Total swap = 255996kB
  524158 pages RAM
  0 pages HighMem/MovableOnly
  12648 pages reserved
  0 pages cma reserved
  0 pages hwpoisoned

During the investigation, I found some problems with highatomic so this
patch aims to solve the problems and the final goal is to unreserve
every highatomic free pages before the OOM kill.

This patch (of 4):

In page freeing path, migratetype is racy so that a highorderatomic page
could free into non-highorderatomic free list.  If that page is
allocated, VM can change the pageblock from higorderatomic to something.
In that case, highatomic pageblock accounting is broken so it doesn't
work(e.g., VM cannot reserve highorderatomic pageblocks any more
although it doesn't reach 1% limit).

So, this patch prohibits the changing from highatomic to other type.
It's no problem because MIGRATE_HIGHATOMIC is not listed in fallback
array so stealing will only happen due to unexpected races which is
really rare.  Also, such prohibiting keeps highatomic pageblock more
longer so it would be better for highorderatomic page allocation.

Link: http://lkml.kernel.org/r/1476259429-18279-2-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Sangseok Lee <sangseok.lee@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Documentation/kmemleak.txt was moved to Documentation/dev-tools/kmemleak.rst,
this fixes the reference to the new location.

Link: http://lkml.kernel.org/r/1476544946-18804-1-git-send-email-andreas.platschek@opentech.atSigned-off-by: NAndreas Platschek <andreas.platschek@opentech.at>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No functional change by this patch.

Link: http://lkml.kernel.org/r/20161018090234.22574-1-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We cannot use the pte value used in set_pte_at for pte_same comparison,
because archs like ppc64, filter/add new pte flag in set_pte_at.
Instead fetch the pte value inside hugetlb_cow.  We are comparing pte
value to make sure the pte didn't change since we dropped the page table
lock.  hugetlb_cow get called with page table lock held, and we can take
a copy of the pte value before we drop the page table lock.

With hugetlbfs, we optimize the MAP_PRIVATE write fault path with no
previous mapping (huge_pte_none entries), by forcing a cow in the fault
path.  This avoid take an addition fault to covert a read-only mapping
to read/write.  Here we were comparing a recently instantiated pte (via
set_pte_at) to the pte values from linux page table.  As explained above
on ppc64 such pte_same check returned wrong result, resulting in us
taking an additional fault on ppc64.

Fixes: 6a119eae ("powerpc/mm: Add a _PAGE_PTE bit")
Link: http://lkml.kernel.org/r/20161018154245.18023-1-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reported-by: NJan Stancek <jstancek@redhat.com>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make vma_permits_fault() static as it is only used in mm/gup.c

This fixes a sparse warning.

Link: http://lkml.kernel.org/r/20161017122353.31598-1-tklauser@distanz.chSigned-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Our system uses significantly more slab memory with memcg enabled with
the latest kernel.  With 3.10 kernel, slab uses 2G memory, while with
4.6 kernel, 6G memory is used.  The shrinker has problem.  Let's see we
have two memcg for one shrinker.  In do_shrink_slab:

1. Check cg1.  nr_deferred = 0, assume total_scan = 700.  batch size
   is 1024, then no memory is freed.  nr_deferred = 700

2. Check cg2.  nr_deferred = 700.  Assume freeable = 20, then
   total_scan = 10 or 40.  Let's assume it's 10.  No memory is freed.
   nr_deferred = 10.

The deferred share of cg1 is lost in this case.  kswapd will free no
memory even run above steps again and again.

The fix makes sure one memcg's deferred share isn't lost.

Link: http://lkml.kernel.org/r/2414be961b5d25892060315fbb56bb19d81d0c07.1476227351.git.shli@fb.comSigned-off-by: NShaohua Li <shli@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: <stable@vger.kernel.org>	[4.0+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We had some problems with pages getting unmapped in single threaded
affinitized processes.  It was tracked down to NUMA scanning.

In this case it doesn't make any sense to unmap pages if the process is
single threaded and the page is already on the node the process is
running on.

Add a check for this case into the numa protection code, and skip
unmapping if true.

In theory the process could be migrated later, but we will eventually
rescan and unmap and migrate then.

In theory this could be made more fancy: remembering this state per
process or even whole mm.  However that would need extra tracking and be
more complicated, and the simple check seems to work fine so far.

[ak@linux.intel.com: v3: Minor updates from Mel. Change code layout]
  Link: http://lkml.kernel.org/r/1476382117-5440-1-git-send-email-andi@firstfloor.org
Link: http://lkml.kernel.org/r/1476288949-20970-1-git-send-email-andi@firstfloor.orgSigned-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rather than tracking the number of active slabs for each node, track the
total number of slabs.  This is a minor improvement that avoids active
slab tracking when a slab goes from free to partial or partial to free.

For slab debugging, this also removes an explicit free count since it
can easily be inferred by the difference in number of total objects and
number of active objects.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1612042020110.115755@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com>
Suggested-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reading /proc/slabinfo or monitoring slabtop(1) can become very
expensive if there are many slab caches and if there are very lengthy
per-node partial and/or free lists.

Commit 07a63c41 ("mm/slab: improve performance of gathering slabinfo
stats") addressed the per-node full lists which showed a significant
improvement when no objects were freed.  This patch has the same
motivation and optimizes the remainder of the usecases where there are
very lengthy partial and free lists.

This patch maintains per-node active_slabs (full and partial) and
free_slabs rather than iterating the lists at runtime when reading
/proc/slabinfo.

When allocating 100GB of slab from a test cache where every slab page is
on the partial list, reading /proc/slabinfo (includes all other slab
caches on the system) takes ~247ms on average with 48 samples.

As a result of this patch, the same read takes ~0.856ms on average.

[rientjes@google.com: changelog]
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1611081505240.13403@chino.kir.corp.google.comSigned-off-by: NGreg Thelen <gthelen@google.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Verify that kmem_create_cache flags are not allocator specific.  It is
done before removing flags that are not available with the current
configuration.

The current kmem_cache_create removes incorrect flags but do not
validate the callers are using them right.  This change will ensure that
callers are not trying to create caches with flags that won't be used
because allocator specific.

Link: http://lkml.kernel.org/r/1478553075-120242-2-git-send-email-thgarnie@google.comSigned-off-by: NThomas Garnier <thgarnie@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The slub allocator gives us some incorrect warnings when
CONFIG_PROFILE_ANNOTATED_BRANCHES is set, as the unlikely() macro
prevents it from seeing that the return code matches what it was before:

  mm/slub.c: In function `kmem_cache_free_bulk':
  mm/slub.c:262:23: error: `df.s' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  mm/slub.c:2943:3: error: `df.cnt' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  mm/slub.c:2933:4470: error: `df.freelist' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  mm/slub.c:2943:3: error: `df.tail' may be used uninitialized in this function [-Werror=maybe-uninitialized]

I have not been able to come up with a perfect way for dealing with
this, the three options I see are:

 - add a bogus initialization, which would increase the runtime overhead
 - replace unlikely() with unlikely_notrace()
 - remove the unlikely() annotation completely

I checked the object code for a typical x86 configuration and the last
two cases produce the same result, so I went for the last one, which is
the simplest.

Link: http://lkml.kernel.org/r/20161024155704.3114445-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

synchronize_sched() is a heavy operation and calling it per each cache
owned by a memory cgroup being destroyed may take quite some time.  What
is worse, it's currently called under the slab_mutex, stalling all works
doing cache creation/destruction.

Actually, there isn't much point in calling synchronize_sched() for each
cache - it's enough to call it just once - after setting cpu_partial for
all caches and before shrinking them.  This way, we can also move it out
of the slab_mutex, which we have to hold for iterating over the slab
cache list.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=172991
Link: http://lkml.kernel.org/r/0a10d71ecae3db00fb4421bcd3f82bcc911f4be4.1475329751.git.vdavydov.dev@gmail.comSigned-off-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Reported-by: NDoug Smythies <dsmythies@telus.net>
Acked-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Creating a lot of cgroups at the same time might stall all worker
threads with kmem cache creation works, because kmem cache creation is
done with the slab_mutex held.  The problem was amplified by commits
801faf0d ("mm/slab: lockless decision to grow cache") in case of
SLAB and 81ae6d03 ("mm/slub.c: replace kick_all_cpus_sync() with
synchronize_sched() in kmem_cache_shrink()") in case of SLUB, which
increased the maximal time the slab_mutex can be held.

To prevent that from happening, let's use a special ordered single
threaded workqueue for kmem cache creation.  This shouldn't introduce
any functional changes regarding how kmem caches are created, as the
work function holds the global slab_mutex during its whole runtime
anyway, making it impossible to run more than one work at a time.  By
using a single threaded workqueue, we just avoid creating a thread per
each work.  Ordering is required to avoid a situation when a cgroup's
work is put off indefinitely because there are other cgroups to serve,
in other words to guarantee fairness.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=172981
Link: http://lkml.kernel.org/r/20161004131417.GC1862@esperanzaSigned-off-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Reported-by: NDoug Smythies <dsmythies@telus.net>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>