- 30 1月, 2010 3 次提交
-
-
由 David Miller 提交于
Here are the sparc bits to remove TIF_ABI_PENDING now that set_personality() is called at the appropriate place in exec. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 H. Peter Anvin 提交于
Now that the previous commit made it possible to do the personality setting at the point of no return, we do just that for ELF binaries. And suddenly all the reasons for that insane TIF_ABI_PENDING bit go away, and we can just make SET_PERSONALITY() just do the obvious thing for a 32-bit compat process. Everything becomes much more straightforward this way. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
'flush_old_exec()' is the point of no return when doing an execve(), and it is pretty badly misnamed. It doesn't just flush the old executable environment, it also starts up the new one. Which is very inconvenient for things like setting up the new personality, because we want the new personality to affect the starting of the new environment, but at the same time we do _not_ want the new personality to take effect if flushing the old one fails. As a result, the x86-64 '32-bit' personality is actually done using this insane "I'm going to change the ABI, but I haven't done it yet" bit (TIF_ABI_PENDING), with SET_PERSONALITY() not actually setting the personality, but just the "pending" bit, so that "flush_thread()" can do the actual personality magic. This patch in no way changes any of that insanity, but it does split the 'flush_old_exec()' function up into a preparatory part that can fail (still called flush_old_exec()), and a new part that will actually set up the new exec environment (setup_new_exec()). All callers are changed to trivially comply with the new world order. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 1月, 2010 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: Fix failure exit in ipathfs fix oops in fs/9p late mount failure fix leak in romfs_fill_super() get rid of pointless checks after simple_pin_fs() Fix failure exits in bfs_fill_super() fix affs parse_options() Fix remount races with symlink handling in affs Fix a leak in affs_fill_super()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: remove IOH range fetching PCI: fix nested spinlock hang in aer_inject
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Update mach-types [ARM] orion5x: D-link DNS-323 rev. B1 power-off [ARM] Orion5x: add GPIO LED and buttons for wrt350n v2 [ARM] pxa: fix irq suspend/resume for pxa25x [ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus [ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot [ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs MIPS: PowerTV: Streamline access to platform device registers MIPS: Fix vmlinuz build for 32bit-only math shells MIPS: Add support of LZO-compressed kernels
-
git://git.infradead.org/ubi-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.infradead.org/ubi-2.6: UBI: fix volume creation input checking
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix crashes with TSB43AB23 on 64bit systems firewire: core: fix use-after-free regression in FCP handler firewire: cdev: add_descriptor documentation fix firewire: core: add_descriptor size check
-
由 Jeff Garrett 提交于
Turned out to cause trouble on single IOH machines, and is superceded by _CRS on multi-IOH machines with production BIOSes. Signed-off-by: NJeff Garrett <jeff@jgarrett.org> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 28 1月, 2010 10 次提交
-
-
由 David VomLehn 提交于
The MIPS processor is limited to 64 external interrupt sources. Using a greater number without IRQ sharing requires reading platform-specific registers. On such platforms, reading the IntCtl register to determine which interrupt corresponds to a timer interrupt will not work. On MIPSR2 systems there is a solution - the TI bit in the Cause register, specifically indicates that a timer interrupt has occured. This patch uses that bit to detect interrupts for MIPSR2 processors, which may be expected to work regardless of how the timer interrupt may be routed in the hardware. Signed-off-by: David VomLehn (dvomlehn@cisco.com) To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/804/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David VomLehn 提交于
Pre-compute addresses for the basic ASIC registers. This speeds up access and allows memory for unused configurations to be freed. In addition, uninitialized register addresses will be returned as NULL to catch bad usage quickly. Signed-off-by: NDavid VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/806/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Alexander Clouter 提交于
POSIX requires $((<expression>)) arithmetic in sh only to have long arithmetic so on 32-bit sh binaries might do only 32-bit arithmetic but the arithmetic done in arch/mips/boot/compressed/Makefile needs 64-bit. I play with the AR7 platform, so VMLINUX_LOAD_ADDRESS is 0xffffffff94100000, and for an example 4MiB kernel VMLINUZ_LOAD_ADDRESS is made out to be: ---- alex@berk:~$ bash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' ffffffff94500000 alex@berk:~$ dash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' 80000000003fffff ---- The former is obviously correct whilst the later breaks things royally. Fortunately working with only the lower 32bit's works for both bash and dash: ---- $ bash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 $ dash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 ---- So, we can split the original 64bit string to two parts, and only calculate the low 32bit part, which is big enough (1GiB kernel sizes anyone?) for a normal Linux kernel image file, now, we calculate the VMLINUZ_LOAD_ADDRESS like this: 1. if present, append top 32bit of VMLINUX_LOAD_ADDRESS" as a prefix 2. get the sum of the low 32bit of VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE This patch fixes vmlinuz kernel builds on systems where only a 32bit-only math shell is available. Patch Changelog: Version 2 - simplified method by using 'expr' for 'substr' and making it work with dash once again Version 1 - Revert the removals of '-n "$(VMLINUX_SIZE)"' to avoid the error of "make clean" - Consider more cases of the VMLINUX_LOAD_ADDRESS Version 0 - initial release Signed-off-by: NAlexander Clouter <alex@digriz.org.uk> Acked-by: NWu Zhangjin <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/861/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
The necessary changes to the x86 Kconfig and boot/compressed to allow the use of this new compression method. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Patchwork: http://patchwork.linux-mips.org/patch/857/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] aic79xx: check for non-NULL scb in ahd_handle_nonpkt_busfree [SCSI] zfcp: Set hardware timeout as requested by BSG request. [SCSI] zfcp: Introduce bsg_timeout callback. [SCSI] scsi_transport_fc: Allow LLD to reset FC BSG timeout [SCSI] zfcp: add missing compat ptr conversion [SCSI] zfcp: Fix linebreak in hba trace [SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG request [SCSI] qla2xxx: Update version number to 8.03.01-k10. [SCSI] fc-transport: Use packed modifier for fc_bsg_request structure. [SCSI] qla2xxx: Perform fast mailbox read of flash regardless of size nor address alignment. [SCSI] qla2xxx: Correct FCP2 recovery handling. [SCSI] scsi_lib: Fix bug in completion of bidi commands [SCSI] mptsas: Fix issue with chain pools allocation on katmai [SCSI] aacraid: fix File System going into read-only mode [SCSI] lpfc: fix file permissions
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix single stepped svcs with TRACE_IRQFLAGS=y [S390] zcrypt: Do not remove coprocessor for error 8/72 [S390] sclp_vt220: set initial terminal window size [S390] use set_current_state in sigsuspend [S390] irqflags: add missing types.h include [S390] dasd: fix possible NULL pointer errors
-
由 Chris Wilson 提交于
Having missed the ENOMEM return via i915_gem_fault(), there are probably other paths that I also missed. By not enabling NORETRY by default these paths can run the shrinker and take memory from the system (but not from our own inactive lists because our shrinker can not run whilst we hold the struct mutex) and this may allow the system to survive a little longer whilst our drivers consume all available memory. References: OOM killer unexpectedly called with kernel 2.6.32 http://bugzilla.kernel.org/show_bug.cgi?id=14933 v2: Pass gfp into page mapping. v3: Use new read_cache_page_gfp() instead of open-coding. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stefan Richter 提交于
Unsurprisingly, Texas Instruments TSB43AB23 exhibits the same behaviour as TSB43AB22/A in dual buffer IR DMA mode: If descriptors are located at physical addresses above the 31 bit address range (2 GB), the controller will overwrite random memory. With luck, this merely prevents video reception. With only a little less luck, the machine crashes. We use the same workaround here as with TSB43AB22/A: Switch off the dual buffer capability flag and use packet-per-buffer IR DMA instead. Another possible workaround would be to limit the coherent DMA mask to 31 bits. In Linux 2.6.33, this change serves effectively only as documentation since dual buffer mode is not used for any controller anymore. But somebody might want to re-enable it in the future to make use of features of dual buffer DMA that are not available in packet-per-buffer mode. In Linux 2.6.32 and older, this update is vital for anyone with this controller, more than 2 GB RAM, a 64 bit kernel, and FireWire video or audio applications. We have at least four reports: http://bugzilla.kernel.org/show_bug.cgi?id=13808 http://marc.info/?l=linux1394-user&m=126154279004083 https://bugzilla.redhat.com/show_bug.cgi?id=552142 http://marc.info/?l=linux1394-user&m=126432246128386 Reported-by: Paul Johnson Reported-by: Ronneil Camara Reported-by: G Zornetzer Reported-by: Mark Thompson Cc: stable@kernel.org Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Linus Torvalds 提交于
It's a simplified 'read_cache_page()' which takes a page allocation flag, so that different paths can control how aggressive the memory allocations are that populate a address space. In particular, the intel GPU object mapping code wants to be able to do a certain amount of own internal memory management by automatically shrinking the address space when memory starts getting tight. This allows it to dynamically use different memory allocation policies on a per-allocation basis, rather than depend on the (static) address space gfp policy. The actual new function is a one-liner, but re-organizing the helper functions to the point where you can do this with a single line of code is what most of the patch is all about. Tested-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 1月, 2010 18 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, msr/cpuid: Pass the number of minors when unregistering MSR and CPUID drivers. x86: Remove "x86 CPU features in debugfs" (CONFIG_X86_CPU_DEBUG) Revert "x86: ucode-amd: Load ucode-patches once ..." x86: Disable HPET MSI on ATI SB700/SB800 x86: Set hotpluggable nodes in nodes_possible_map
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix UP build.
-
由 Mika Westerberg 提交于
Do not use an unchecked variable UBI_IOCMKVOL ioctl. Signed-off-by: NMika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@vger.kernel.org
-
由 Martin Schwidefsky 提交于
If irq flags tracing is enabled the TRACE_IRQS_ON macros expands to a function call which clobbers registers %r0-%r5. The macro is used in the code path for single stepped system calls. The argument registers %r2-%r6 need to be restored from the stack before the system call function is called. Cc: stable@kernel.org Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Felix Beck 提交于
In a case where the number of the input data is bigger than the modulus of the key, the coprocessor adapters will report an 8/72 error. This case is not caught yet, thus the adapter will be taken offline. To prevent this, we return an -EINVAL instead. Signed-off-by: NFelix Beck <felix.beck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
When opening a SCLP VT220 terminal, the terminal window size is not initialized (defaults to zero). Since the SCLP VT220 terminal supports only 80x24, explicitly set the window size to prevent (n)curses applications from guessing the default setting. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Use set_current_state instead of a direct assignment to set the task state of the current process. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Add missing types.h include. Otherwise would cause build breakages on hw breakpoint support, because of undefined BITS_PER_LONG. Also fix up the copyright line and remove the superfluous __KERNEL__ ifdef. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
Fix possible NULL pointer in DASD messages and correct discipline checking. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Russ Anderson 提交于
Pass the number of minors when unregistering MSR and CPUID drivers. Reported-by: NDean Nelson <dnelson@redhat.com> Signed-off-by: NDean Nelson <dnelson@redhat.com> LKML-Reference: <20100127023722.GA22305@sgi.com> Signed-off-by: NRuss Anderson <rja@sgi.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Al Viro 提交于
deactivate_locked_super() will be done by caller of fill_super, doing it there as well is b0rken. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
if 9P ->get_sb() fails late (at root inode or root dentry allocation), we'll hit its ->kill_sb() with NULL ->s_root Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
if we'd just got success from it, vfsmount won't be NULL Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
double iput(), leaks... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Error handling in that sucker got broken back in 2003. If function returns 0 on failure, it's not nice to add return -EINVAL into it. Adding return 1 on other failure exits is also not a good thing (and yes, original success exits with 1 and some of failure exits with 0 are still there; so's the original logics in callers). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
A couple of fields in affs_sb_info is used in follow_link() and symlink() for handling AFFS "absolute" symlinks. Need locking against affs_remount() updates. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-