Patch re-spin.
Incorporated review comments by Ben Hutchings.
Signed-off-by: NSuresh Reddy <suresh.reddy@emulex.com>
Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com>
Acked-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

csummode variable is always CHECKSUM_NONE in ip6_append_data()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix two issues introduced in commit a1c7fff7
( net: netdev_alloc_skb() use build_skb() )

- Must be IRQ safe (non NAPI drivers can use it)
- Must not leak the frag if build_skb() fails to allocate sk_buff

This patch introduces netdev_alloc_frag() for drivers willing to
use build_skb() instead of __netdev_alloc_skb() variants.

Factorize code so that :
__dev_alloc_skb() is a wrapper around __netdev_alloc_skb(), and
dev_alloc_skb() a wrapper around netdev_alloc_skb()

Use __GFP_COLD flag.

Almost all network drivers now benefit from skb->head_frag
infrastructure.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As iwlwifi use fat skbs, it should not pull too much data in skb->head,
and particularly no tcp data payload, or splice() is slower, and TCP
coalescing is disabled. Copying payload to userland also involves at
least two copies (part from header, part from fragment)

Each layer will pull its header from the fragment as needed.

(on 64bit arches, skb_tailroom(skb) at this point is 192 bytes)

With this patch applied, I have a major reduction of collapsed/pruned
TCP packets, a nice increase of TCPRcvCoalesce counter, and overall
better Internet User experience.

Small packets are still using a fragless skb, so that page can be reused
by the driver.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Reviewed-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipv6_opt_accepted() returns a bool, and can use const pointers

ipv6_addr_equal(), ipv6_addr_any(), ipv6_addr_loopback(),
ipv6_addr_orchid() return a bool.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- match() method returns a boolean
- return (A && B && C && D) -> return A && B && C && D
- fix indentation
Signed-off-by: NEric Dumazet <edumazet@google.com>

ECONET is gone, thus this can be deleted as well.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

More spring cleaning!

The ancient Econet protocol should go. Most of the bug fixes in recent
years have been fixing security vulnerabilities. The hardware hasn't
been made since the 90s, it is only interesting as an archeological curiosity.

For the truly curious, or insomniac, go read up on it.
  http://en.wikipedia.org/wiki/EconetSigned-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The use of the inw/outw functions by the cs89x0 platform driver
results in NULL pointer references on ARM platforms and
platforms that do not provide ISA-style programmed I/O accessors.

Using inw/outw also accesses the wrong address space on platforms
that have a PCI I/O space that is not identity-mapped into the
physical address space.
Signed-off-by: NJaccon Bastiaansen <jaccon.bastiaansen@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable dynamic debugging and remove a bunch of #ifdef/#endifs.

Add a lapb_dbg(level, fmt, ...) macro and replace the
printk(KERN_DEBUG uses.
Add pr_fmt and remove embedded prefixes.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The support for CONFIG_MCA is being removed, since the 20
year old hardware simply isn't capable of meeting today's
software demands on CPU and memory resources.

This commit removes any MCA specific net drivers, and removes
any MCA specific probe/support code from drivers that were
doing a dual ISA/MCA role.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: netdev@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Change the TX ring scheme such that the number of rings for untagged packets
and for tagged packets (per each of the vlan priorities) is the same, unlike
the current situation where for tagged traffic there's one ring per priority
and for untagged rings as the number of core.

Queue selection is done as follows:

If the mqprio qdisc is operates on the interface, such that the core networking
code invoked the device setup_tc ndo callback, a mapping of skb->priority =>
queue set is forced - for both, tagged and untagged traffic.

Else, the egress map skb->priority =>  User priority is used for tagged traffic, and
all untagged traffic is sent through tx rings of UP 0.

The patch follows the convergence of discussing that issue with John Fastabend
over this thread http://comments.gmane.org/gmane.linux.network/229877

Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: Liran Liss <liranl@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When I first wrote drop monitor I wrote it to just build monolithically.  There
is no reason it can't be built modularly as well, so lets give it that
flexibiity.

I've tested this by building it as both a module and monolithically, and it
seems to work quite well

Change notes:

v2)
* fixed for_each_present_cpu loops to be more correct as per Eric D.
* Converted exit path failures to BUG_ON as per Ben H.

v3)
* Converted del_timer to del_timer_sync to close race noted by Ben H.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Reviewed-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netdev_alloc_skb() is used by networks driver in their RX path to
allocate an skb to receive an incoming frame.

With recent skb->head_frag infrastructure, it makes sense to change
netdev_alloc_skb() to use build_skb() and a frag allocator.

This permits a zero copy splice(socket->pipe), and better GRO or TCP
coalescing.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The padding destination or hop-by-hop option is called Pad1 and not Pad0.

See RFC2460 (4.2) or the IANA ipv6-parameters registry:
http://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xmlSigned-off-by: NEldad Zack <eldad@fogrefinery.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix some minor problems in comments of etherdevice.h
 * Warning is out dated, file hasn't moved or disappeared in many years and
    is unlikely to do so soon.
 * Capitalize Ethernet consistently since it is a proper name
 * Fix descriptive comment of padding
 * Spelling and grammar fix for alignment comment
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch removes unused return value from __delete_item() and
delete_item() methods in drivers/net/ppp/pppoe.c.
Signed-off-by: NRami Rosen <ramirose@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bool conversions where possible.

__inline__ -> inline

space cleanups
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Under certain scenarios, it's possible that bursty manageability traffic
over the BMC-to-OS path may overrun the internal manageability receive
buffer causing dropped manageability packets. Clearing this bit prevents
this situation by interrupting coalescing to allow manageability traffic
through.
Signed-off-by: NMatthew Vick <matthew.vick@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The code seems to want to look at the last byte where the HW puts some
information. Since the skb->data area is never seen by the HW I guess it
does not work as expected. We pass the page address to the HW so I
*think* in order to get to the last byte where the information might be
one should use the page buffer and take a look.
This is of course not more than just compile tested.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

According to the comment, errata 23 says that the memory we allocate
can't cross a 64KiB boundary. In case of jumbo frames we allocate
complete pages which can never cross the 64KiB boundary because
PAGE_SIZE should be a multiple of 64KiB so we stop either before the
boundary or start after it but never cross it. Furthermore the check
seems bogus because it looks at skb->data which is not seen by the HW
at all because we only pass the DMA address of the page we allocated. So
I *think* the workaround is not required here.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This define is needed by i217.
Reported-by: NBjorn Mork <bjorn@mork.no>
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Use the current logging style.

This enables use of dynamic debugging as well.

Convert printk(KERN_<LEVEL> to pr_<level>.
Add pr_fmt. Remove embedded prefixes, use
%s, __func__ instead.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Why use several macros when one will do?

Convert the multiple ND_PRINTKx macros to a single
ND_PRINTK macro.  Use the new net_<level>_ratelimited
mechanism too.

Add pr_fmt with "ICMPv6: " as prefix.
Remove embedded ICMPv6 prefixes from messages.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert printk(KERN_DEBUG to pr_debug which can
enable dynamic debugging.

Remove embedded prefixes from the conversions as
pr_fmt adds them.

Align arguments.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bool/const conversions where possible

__inline__ -> inline

space cleanups
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We test both "!skb_out" and "skb_out" here which is duplicative and
causes a static checker warning.  I considered that the intent might
have been to test "skb_in" but that's a valid pointer here.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use more current logging styles.

Add pr_fmt to prefix output appropriately.
Convert printks to pr_<level>.
Convert PRINTK macros to new l2tp_<level> macros.
Neaten some <foo>_refcount debugging macros.
Use print_hex_dump_bytes instead of hand-coded loops.
Coalesce formats and align arguments.

Some KERN_DEBUG output is not now emitted unless
dynamic_debugging is enabled.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ctnetlink uses the aliases that are created by MODULE_ALIAS_NFCT_HELPER
to auto-load the module based on the helper name. Thus, we have to use
RAS, Q.931 and H.245, not H.323.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

nf_conntrack_l4proto.h is included twice.
Signed-off-by: NEldad Zack <eldad@fogrefinery.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Large timeout parameters could result wrong timeout values due to
an overflow at msec to jiffies conversion (reported by Andreas Herz)

[ This patch was mangled by Pablo Neira Ayuso since David Laight and
  Eric Dumazet noticed that we were using hardcoded 1000 instead of
  MSEC_PER_SEC to calculate the timeout ]
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Extend log message if packets are ignored to include the TCP state, ie.
replace:

[ 3968.070196] nf_ct_tcp: invalid packet ignored IN= OUT= SRC=...

by:

[ 3968.070196] nf_ct_tcp: invalid packet ignored in state ESTABLISHED IN= OUT= SRC=...

This information is useful to know in what state we were while ignoring the
packet.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Acked-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

Use:

((u64)(HASH_VAL * HASH_SIZE)) >> 32

as suggested by David S. Miller.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

There is a typo in the error checking and "&&" was used instead of "||".
If skb_header_pointer() returns NULL then it leads to a NULL
dereference.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NHans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

David Miller says:
     The canonical way to validate if the set bits are in a valid
     range is to have a "_ALL" macro, and test:
     if (val & ~XT_HASHLIMIT_ALL)
         goto err;"

make it so.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Pull kvm powerpc fixes from Marcelo Tosatti:
 "Urgent KVM PPC updates, quoting Alexander Graf:

    There are a few bugs in 3.4 that really should be fixed before
    people can be all happy and fuzzy about KVM on PowerPC.  These fixes
    are:

     * fix POWER7 bare metal with PR=y
     * fix deadlock on HV=y book3s_64 mode in low memory cases
     * fix invalid MMU scope of PR=y mode on book3s_64, possibly eading
       to memory corruption"

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S HV: Fix bug leading to deadlock in guest HPT updates
  powerpc/kvm: Fix VSID usage in 64-bit "PR" KVM
  KVM: PPC: Book3S: PR: Fix hsrr code
  KVM: PPC: Fix PR KVM on POWER7 bare metal
  KVM: PPC: Book3S: PR: Handle EMUL_ASSIST

Pull sound fixes from Takashi Iwai:
 "A few last-minute regression fixes for 3.4 final kernel.  All trivial,
  and Cc'ed to stable kernel."

* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm8994: Fix AIF2ADC power down
  ALSA: hda/idt - Fix power-map for speaker-pins with some HP laptops
  ASoC: cs42l73: Sync digital mixer kcontrols to allow for 0dB

Pull remoteproc fix from Ohad Ben-Cohen:
 "Fix a nasty off-by-one remoteproc bug which leaks memory when a remote
  processor is shut down and, on certain circumstances, can indirectly
  prevent it from being reloaded."

* tag 'rproc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
  remoteproc: fix off-by-one bug in __rproc_free_vrings