During early bootup we can't use alloc_page, so to allocate
leaf pages in the P2M we need to use extend_brk. For that
we are utilizing the early_alloc_p2m and early_alloc_p2m_middle
functions to do the job for us. This function follows the
same logic as set_phys_to_machine.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

At the start of the function we were checking for idx != 0
and bailing out. And later calling extend_brk if idx != 0.

That is unnecessary so remove that checks.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

For identity cases we want to call reserve_brk only on the boundary
conditions of the middle P2M (so P2M[x][y][0] = extend_brk). This is
to work around identify regions (PCI spaces, gaps in E820) which are not
aligned on 2MB regions.

However for the case were we want to allocate P2M middle leafs at the
early bootup stage, irregardless of this alignment check we need some
means of doing that.  For that we provide the new argument.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We are going to be using the early_alloc_p2m (and
early_alloc_p2m_middle) code in follow up patches which
are not related to setting identity pages.

Hence lets move the code out in its own function and
rename them as appropiate.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The original XenoLinux code has always had things this way, and for
compatibility reasons (in particular with a subsequent pciback
adjustment) upstream Linux should behave the same way (allowing for two
distinct error indications to be returned by the backend).
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Prior to 2.6.19 and as of 2.6.31, pci_enable_msix() can return a
positive value to indicate the number of vectors (less than the amount
requested) that can be set up for a given device. Returning this as an
operation value (secondary result) is fine, but (primary) operation
results are expected to be negative (error) or zero (success) according
to the protocol. With the frontend fixed to match the XenoLinux
behavior, the backend can now validly return zero (success) here,
passing the upper limit on the number of vectors in op->value.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

There is an extra and unnecessary call to smp_processor_id()
in cpu_bringup(). Remove it.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The above mentioned patch checks the IOAPIC and if it contains
-1, then it unmaps said IOAPIC. But under Xen we get this:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000040
IP: [<ffffffff8134e51f>] xen_irq_init+0x1f/0xb0
PGD 0
Oops: 0002 [#1] SMP
CPU 0
Modules linked in:

Pid: 1, comm: swapper/0 Not tainted 3.2.10-3.fc16.x86_64 #1 Dell Inc. Inspiron
1525                  /0U990C
RIP: e030:[<ffffffff8134e51f>]  [<ffffffff8134e51f>] xen_irq_init+0x1f/0xb0
RSP: e02b: ffff8800d42cbb70  EFLAGS: 00010202
RAX: 0000000000000000 RBX: 00000000ffffffef RCX: 0000000000000001
RDX: 0000000000000040 RSI: 00000000ffffffef RDI: 0000000000000001
RBP: ffff8800d42cbb80 R08: ffff8800d6400000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffffffef
R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000010
FS:  0000000000000000(0000) GS:ffff8800df5fe000(0000) knlGS:0000000000000000
CS:  e033 DS: 0000 ES: 0000 CR0:000000008005003b
CR2: 0000000000000040 CR3: 0000000001a05000 CR4: 0000000000002660
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper/0 (pid: 1, threadinfo ffff8800d42ca000, task ffff8800d42d0000)
Stack:
 00000000ffffffef 0000000000000010 ffff8800d42cbbe0 ffffffff8134f157
 ffffffff8100a9b2 ffffffff8182ffd1 00000000000000a0 00000000829e7384
 0000000000000002 0000000000000010 00000000ffffffff 0000000000000000
Call Trace:
 [<ffffffff8134f157>] xen_bind_pirq_gsi_to_irq+0x87/0x230
 [<ffffffff8100a9b2>] ? check_events+0x12+0x20
 [<ffffffff814bab42>] xen_register_pirq+0x82/0xe0
 [<ffffffff814bac1a>] xen_register_gsi.part.2+0x4a/0xd0
 [<ffffffff814bacc0>] acpi_register_gsi_xen+0x20/0x30
 [<ffffffff8103036f>] acpi_register_gsi+0xf/0x20
 [<ffffffff8131abdb>] acpi_pci_irq_enable+0x12e/0x202
 [<ffffffff814bc849>] pcibios_enable_device+0x39/0x40
 [<ffffffff812dc7ab>] do_pci_enable_device+0x4b/0x70
 [<ffffffff812dc878>] __pci_enable_device_flags+0xa8/0xf0
 [<ffffffff812dc8d3>] pci_enable_device+0x13/0x20

The reason we are dying is b/c the call acpi_get_override_irq() is used,
which returns the polarity and trigger for the IRQs. That function calls
mp_find_ioapics to get the 'struct ioapic' structure - which along with the
mp_irq[x] is used to figure out the default values and the polarity/trigger
overrides. Since the mp_find_ioapics now returns -1 [b/c the IOAPIC is filled
with 0xffffffff], the acpi_get_override_irq() stops trying to lookup in the
mp_irq[x] the proper INT_SRV_OVR and we can't install the SCI interrupt.

The proper fix for this is going in v3.5 and adds an x86_io_apic_ops
struct so that platforms can override it. But for v3.4 lets carry this
work-around. This patch does that by providing a slightly different variant
of the fake IOAPIC entries.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit b9136d207f08
  xen: initialize platform-pci even if xen_emul_unplug=never

breaks blkfront/netfront by not loading them because of
xen_platform_pci_unplug=0 and it is never set for PV guest.
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The functions: "acpi_processor_*" sound like they depend on CONFIG_ACPI_PROCESSOR
but in reality they are exposed when CONFIG_CPU_FREQ=[y|m]. As such
update the Kconfig to have this dependency and fix compile issues:

ERROR: "acpi_processor_unregister_performance" [drivers/xen/xen-acpi-processor.ko] undefined!
ERROR: "acpi_processor_notify_smm" [drivers/xen/xen-acpi-processor.ko] undefined!
ERROR: "acpi_processor_register_performance" [drivers/xen/xen-acpi-processor.ko] undefined!
ERROR: "acpi_processor_preregister_performance" [drivers/xen/xen-acpi-processor.ko] undefined!

Note: We still need the CONFIG_ACPI
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When xen_emul_unplug=never is specified on kernel command line
reading files from /sys/hypervisor is broken (returns -EBUSY).
It is caused by xen_bus dependency on platform-pci and
platform-pci isn't initialized when xen_emul_unplug=never is
specified.

Fix it by allowing platform-pci to ignore xen_emul_unplug=never,
and do not intialize xen_[blk|net]front instead.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The CPU hotplug code has now a callback to help bring up the CPU.
Without the call we end up getting:

 BUG: soft lockup - CPU#0 stuck for 29s! [migration/0:6]
Modules linked in:
CPU ] Pid: 6, comm: migration/0 Not tainted 3.3.0upstream-01180-ged378a52 #1 Dell Inc. PowerEdge T105 /0RR825
RIP: e030:[<ffffffff810d3b8b>]  [<ffffffff810d3b8b>] stop_machine_cpu_stop+0x7b/0xf0
RSP: e02b:ffff8800ceaabdb0  EFLAGS: 00000293
.. snip..
Call Trace:
 [<ffffffff810d3b10>] ? stop_one_cpu_nowait+0x50/0x50
 [<ffffffff810d3841>] cpu_stopper_thread+0xf1/0x1c0
 [<ffffffff815a9776>] ? __schedule+0x3c6/0x760
 [<ffffffff815aa749>] ? _raw_spin_unlock_irqrestore+0x19/0x30
 [<ffffffff810d3750>] ? res_counter_charge+0x150/0x150
 [<ffffffff8108dc76>] kthread+0x96/0xa0
 [<ffffffff815b27e4>] kernel_thread_helper+0x4/0x10
 [<ffffffff815aacbc>] ? retint_restore_ar

Thix fixes it.
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When booting the kernel under machines that do not have P-states
we would end up with:

------------[ cut here ]------------
 WARNING: at drivers/xen/xen-acpi-processor.c:504
 xen_acpi_processor_init+0x286/0
 x2e0()
 Hardware name: ProLiant BL460c G6
 Modules linked in:
 Pid: 1, comm: swapper Not tainted 2.6.39-200.0.3.el5uek #1
 Call Trace:
  [<ffffffff8191d056>] ? xen_acpi_processor_init+0x286/0x2e0
  [<ffffffff81068300>] warn_slowpath_common+0x90/0xc0
  [<ffffffff8191cdd0>] ? check_acpi_ids+0x1e0/0x1e0
  [<ffffffff8106834a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff8191d056>] xen_acpi_processor_init+0x286/0x2e0
  [<ffffffff8191cdd0>] ? check_acpi_ids+0x1e0/0x1e0
  [<ffffffff81002168>] do_one_initcall+0xe8/0x130

.. snip..

Which is OK - the machines do not have P-states, so we fail to register
to process the _PXX states. But there is no need to WARN the user
of it.

Oracle BZ# 13871288
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Use 'bool' for boolean variables. Do proper section placement.
Eliminate an unnecessary export.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Acked-by: NDan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The pirq_eoi_map is a bitmap offered by Xen to check which pirqs need to
be EOI'd without having to issue an hypercall every time.
We use PHYSDEVOP_pirq_eoi_gmfn_v2 to map the bitmap, then if we
succeed we use pirq_eoi_map to check whether pirqs need eoi.

Changes in v3:

- explicitly use PHYSDEVOP_pirq_eoi_gmfn_v2 rather than
PHYSDEVOP_pirq_eoi_gmfn;

- introduce pirq_check_eoi_map, a function to check if a pirq needs an
eoi using the map;

-rename pirq_needs_eoi into pirq_needs_eoi_flag;

- introduce a function pointer called pirq_needs_eoi that is going to be
set to the right implementation depending on the availability of
PHYSDEVOP_pirq_eoi_gmfn_v2.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

With patch "xen/cpufreq: Disable the cpu frequency scaling drivers
from loading." we do not have to worry about said drivers loading
themselves before the xen-acpi-processor driver. Hence we can remove
the default selection (=y if CPU frequency drivers were built-in, or
=m if CPU frequency drivers were built as modules), and just
select =m for the default case.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

By using the functionality provided by "[CPUFREQ]: provide
disable_cpuidle() function to disable the API."

Under the Xen hypervisor we do not want the initial domain to exercise
the cpufreq scaling drivers. This is b/c the Xen hypervisor is
in charge of doing this as well and we can end up with both the
Linux kernel and the hypervisor trying to change the P-states
leading to weird performance issues.
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Fix compile error spotted by Benjamin Schweikert <b.schweikert@googlemail.com>]

useful for disabling cpufreq altogether. The cpu frequency
scaling drivers and cpu frequency governors will fail to register.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NDave Jones <davej@redhat.com>

PV-on-HVM guests may want to use the xen keyboard/mouse frontend, but
they don't use the xen frame buffer frontend. For this case it doesn't
make much sense for INPUT_XEN_KBDDEV_FRONTEND to depend on
XEN_FBDEV_FRONTEND. The opposite direction always makes more sense, i.e.
if you're using xenfb, then you'll want xenkbd. Switch the dependencies.
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This driver solves three problems:
 1). Parse and upload ACPI0007 (or PROCESSOR_TYPE) information to the
     hypervisor - aka P-states (cpufreq data).
 2). Upload the the Cx state information (cpuidle data).
 3). Inhibit CPU frequency scaling drivers from loading.

The reason for wanting to solve 1) and 2) is such that the Xen hypervisor
is the only one that knows the CPU usage of different guests and can
make the proper decision of when to put CPUs and packages in proper states.
Unfortunately the hypervisor has no support to parse ACPI DSDT tables, hence it
needs help from the initial domain to provide this information. The reason
for 3) is that we do not want the initial domain to change P-states while the
hypervisor is doing it as well - it causes rather some funny cases of P-states
transitions.

For this to work, the driver parses the Power Management data and uploads said
information to the Xen hypervisor. It also calls acpi_processor_notify_smm()
to inhibit the other CPU frequency scaling drivers from being loaded.

Everything revolves around the 'struct acpi_processor' structure which
gets updated during the bootup cycle in different stages. At the startup, when
the ACPI parser starts, the C-state information is processed (processor_idle)
and saved in said structure as 'power' element. Later on, the CPU frequency
scaling driver (powernow-k8 or acpi_cpufreq), would call the the
acpi_processor_* (processor_perflib functions) to parse P-states information
and populate in the said structure the 'performance' element.

Since we do not want the CPU frequency scaling drivers from loading
we have to call the acpi_processor_* functions to parse the P-states and
call "acpi_processor_notify_smm" to stop them from loading.

There is also one oddity in this driver which is that under Xen, the
physical online CPU count can be different from the virtual online CPU count.
Meaning that the macros 'for_[online|possible]_cpu' would process only
up to virtual online CPU count. We on the other hand want to process
the full amount of physical CPUs. For that, the driver checks if the ACPI IDs
count is different from the APIC ID count - which can happen if the user
choose to use dom0_max_vcpu argument. In such a case a backup of the PM
structure is used and uploaded to the hypervisor.

[v1-v2: Initial RFC implementations that were posted]
[v3: Changed the name to passthru suggested by Pasi Kärkkäinen <pasik@iki.fi>]
[v4: Added vCPU != pCPU support - aka dom0_max_vcpus support]
[v5: Cleaned up the driver, fix bug under Athlon XP]
[v6: Changed the driver to a CPU frequency governor]
[v7: Jan Beulich <jbeulich@suse.com> suggestion to make it a cpufreq scaling driver
     made me rework it as driver that inhibits cpufreq scaling driver]
[v8: Per Jan's review comments, fixed up the driver]
[v9: Allow to continue even if acpi_processor_preregister_perf.. fails]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The functions these get passed to have been taking pointers to const
since at least 2.6.16.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Unfortunately xend creates a bogus console/0 frotend/backend entry pair
on xenstore that console backends cannot properly cope with.
Any guest behavior that is not completely ignoring console/0 is going
to either cause problems with xenconsoled or qemu.
Returning 0 or -ENODEV from xencons_probe is not enough because it is
going to cause the frontend state to become 4 or 6 respectively.
The best possible thing we can do here is just ignore the entry from
xenbus_probe_frontend.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Introduce a new config option HVC_XEN_FRONTEND to enable/disable the
xenbus based pv console frontend.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This patch implements support for multiple consoles:
consoles other than the first one are setup using the traditional xenbus
and grant-table based mechanism.
We use a list to keep track of the allocated consoles, we don't
expect too many of them anyway.

Changes in v3:

- call hvc_remove before removing the console from xenconsoles;
- do not lock xencons_lock twice in the destruction path;
- use the DEFINE_XENBUS_DRIVER macro.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The individual drivers' remove functions could legitimately attempt to
access this information (for logging messages if nothing else). Note
that I did not in fact observe a problem anywhere, but I came across
this while looking into the reasons for what turned out to need the
fix at https://lkml.org/lkml/2012/3/5/336 to vsprintf().
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

For the hypervisor to take advantage of the MWAIT support it needs
to extract from the ACPI _CST the register address. But the
hypervisor does not have the support to parse DSDT so it relies on
the initial domain (dom0) to parse the ACPI Power Management information
and push it up to the hypervisor. The pushing of the data is done
by the processor_harveset_xen module which parses the information that
the ACPI parser has graciously exposed in 'struct acpi_processor'.

For the ACPI parser to also expose the Cx states for MWAIT, we need
to expose the MWAIT capability (leaf 1). Furthermore we also need to
expose the MWAIT_LEAF capability (leaf 5) for cstate.c to properly
function.

The hypervisor could expose these flags when it traps the XEN_EMULATE_PREFIX
operations, but it can't do it since it needs to be backwards compatible.
Instead we choose to use the native CPUID to figure out if the MWAIT
capability exists and use the XEN_SET_PDC query hypercall to figure out
if the hypervisor wants us to expose the MWAIT_LEAF capability or not.

Note: The XEN_SET_PDC query was implemented in c/s 23783:
"ACPI: add _PDC input override mechanism".

With this in place, instead of
 C3 ACPI IOPORT 415
we get now
 C3:ACPI FFH INTEL MWAIT 0x20

Note: The cpu_idle which would be calling the mwait variants for idling
never gets set b/c we set the default pm_idle to be the hypercall variant.
Acked-by: NJan Beulich <JBeulich@suse.com>
[v2: Fix missing header file include and #ifdef]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We needed that call in the past to force the kernel to use
default_idle (which called safe_halt, which called xen_safe_halt).

But set_pm_idle_to_default() does now that, so there is no need
to use this boot option operand.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

- casting pointers to integer types of different size is being warned on
- an uninitialized variable warning occurred on certain gcc versions
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

percpu_xxx funcs are duplicated with this_cpu_xxx funcs, so replace them
for further code clean up.

I don't know much of xen code. But, since the code is in x86 architecture,
the percpu_xxx is exactly same as this_cpu_xxx serials functions. So, the
change is safe.
Signed-off-by: NAlex Shi <alex.shi@intel.com>
Acked-by: NChristoph Lameter <cl@gentwo.org>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We use the __pci_reset_function_locked to perform the action.
Also on attaching ("bind") and detaching ("unbind") we save and
restore the configuration states. When the device is disconnected
from a guest we use the "pci_reset_function" to also reset the
device before being passed to another guest.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The use case of this is when a driver wants to call FLR when a device
is attached to it using the SysFS "bind" or "unbind" functionality.

The call chain when a user does "bind" looks as so:

 echo "0000:01.07.0" > /sys/bus/pci/drivers/XXXX/bind

and ends up calling:
  driver_bind:
    device_lock(dev);  <=== TAKES LOCK
    XXXX_probe:
         .. pci_enable_device()
         ...__pci_reset_function(), which calls
                 pci_dev_reset(dev, 0):
                        if (!0) {
                                device_lock(dev) <==== DEADLOCK

The __pci_reset_function_locked function allows the the drivers
'probe' function to call the "pci_reset_function" while still holding
the driver mutex lock.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

to make a hypercall to restore the vectors in the MSI/MSI-X
configuration space.
Signed-off-by: NTang Liang <liang.tang@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits)
  x86/PCI: Expand the x86_msi_ops to have a restore MSIs.
  PCI: Increase resource array mask bit size in pcim_iomap_regions()
  PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES
  PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT)
  PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB
  x86/PCI: amd: factor out MMCONFIG discovery
  PCI: Enable ATS at the device state restore
  PCI: msi: fix imbalanced refcount of msi irq sysfs objects
  PCI: kconfig: English typo in pci/pcie/Kconfig
  PCI/PM/Runtime: make PCI traces quieter
  PCI: remove pci_create_bus()
  xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources
  x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus()
  x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented()
  x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan
  sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources
  sparc/PCI: convert to pci_create_root_bus()
  sh/PCI: convert to pci_scan_root_bus() for correct root bus resources
  powerpc/PCI: convert to pci_create_root_bus()
  powerpc/PCI: split PHB part out of pcibios_map_io_space()
  ...

Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due
to the same patches being applied in other branches.

frv, h8300, m68k, microblaze, openrisc, score, um and xtensa currently
do not register a CPU device.  Add the config option GENERIC_CPU_DEVICES
which causes a generic CPU device to be registered for each present CPU,
and make all these architectures select it.

Richard Weinberger <richard@nod.at> covered UML and suggested using
per_cpu.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cpu_dev_init() is only called from driver_init(), which does not check
its return value.  Therefore make cpu_dev_init() return void.

We must register the CPU subsystem, so panic if this fails.

If sched_create_sysfs_power_savings_entries() fails, the damage is
contained, so ignore this (as before).
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (54 commits)
  crypto: gf128mul - remove leftover "(EXPERIMENTAL)" in Kconfig
  crypto: serpent-sse2 - remove unneeded LRW/XTS #ifdefs
  crypto: serpent-sse2 - select LRW and XTS
  crypto: twofish-x86_64-3way - remove unneeded LRW/XTS #ifdefs
  crypto: twofish-x86_64-3way - select LRW and XTS
  crypto: xts - remove dependency on EXPERIMENTAL
  crypto: lrw - remove dependency on EXPERIMENTAL
  crypto: picoxcell - fix boolean and / or confusion
  crypto: caam - remove DECO access initialization code
  crypto: caam - fix polarity of "propagate error" logic
  crypto: caam - more desc.h cleanups
  crypto: caam - desc.h - convert spaces to tabs
  crypto: talitos - convert talitos_error to struct device
  crypto: talitos - remove NO_IRQ references
  crypto: talitos - fix bad kfree
  crypto: convert drivers/crypto/* to use module_platform_driver()
  char: hw_random: convert drivers/char/hw_random/* to use module_platform_driver()
  crypto: serpent-sse2 - should select CRYPTO_CRYPTD
  crypto: serpent - rename serpent.c to serpent_generic.c
  crypto: serpent - cleanup checkpatch errors and warnings
  ...

* 'for-linus' of git://selinuxproject.org/~jmorris/linux-security: (32 commits)
  ima: fix invalid memory reference
  ima: free duplicate measurement memory
  security: update security_file_mmap() docs
  selinux: Casting (void *) value returned by kmalloc is useless
  apparmor: fix module parameter handling
  Security: tomoyo: add .gitignore file
  tomoyo: add missing rcu_dereference()
  apparmor: add missing rcu_dereference()
  evm: prevent racing during tfm allocation
  evm: key must be set once during initialization
  mpi/mpi-mpow: NULL dereference on allocation failure
  digsig: build dependency fix
  KEYS: Give key types their own lockdep class for key->sem
  TPM: fix transmit_cmd error logic
  TPM: NSC and TIS drivers X86 dependency fix
  TPM: Export wait_for_stat for other vendor specific drivers
  TPM: Use vendor specific function for status probe
  tpm_tis: add delay after aborting command
  tpm_tis: Check return code from getting timeouts/durations
  tpm: Introduce function to poll for result of self test
  ...

Fix up trivial conflict in lib/Makefile due to addition of CONFIG_MPI
and SIGSIG next to CONFIG_DQL addition.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  autofs4: deal with autofs4_write/autofs4_write races
  autofs4: catatonic_mode vs. notify_daemon race
  autofs4: autofs4_wait() vs. autofs4_catatonic_mode() race
  hfsplus: creation of hidden dir on mount can fail
  block_dev: Suppress bdev_cache_init() kmemleak warninig
  fix shrink_dcache_parent() livelock
  coda: switch coda_cnode_make() to sane API as well, clean coda_lookup()
  coda: deal correctly with allocation failure from coda_cnode_makectl()
  securityfs: fix object creation races

Just serialize the actual writing of packets into pipe on
a new mutex, independent from everything else in the locking
hierarchy.  As soon as something has started feeding a piece
of packet into the pipe to daemon, we *want* everything else
about to try the same to wait until we are done.
Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>