- 19 10月, 2007 4 次提交
-
-
由 Miklos Szeredi 提交于
Each WRITE request must carry a valid file descriptor. When a page is written back from a memory mapping, the file through which the page was dirtied is not available, so a new mechananism is needed to find a suitable file in ->writepage(s). A list of fuse_files is added to fuse_inode. The file is removed from the list in fuse_release(). This patch is in preparation for writable mmap support. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
This patch allows fuse filesystems to implement open(..., O_TRUNC) as a single request, instead of separate truncate and open requests. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
Getattr and lookup operations can be running in parallel to attribute changing operations, such as write and setattr. This means, that if for example getattr was slower than a write, the cached size attribute could be set to a stale value. To prevent this race, introduce a per-filesystem attribute version counter. This counter is incremented whenever cached attributes are modified, and the incremented value stored in the inode. Before storing new attributes in the cache, getattr and lookup check, using the version number, whether the attributes have been modified during the request's lifetime. If so, the returned attributes are not cached, because they might be stale. Thanks to Jakub Bogusz for the bug report and test program. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Cc: Jakub Bogusz <jakub.bogusz@gemius.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
The following operation didn't check if sending the request was allowed: setattr listxattr statfs Some other operations don't explicitly do the check, but VFS calls ->permission() which checks this. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 10月, 2007 5 次提交
-
-
由 Miklos Szeredi 提交于
The VFS checks sticky bits on the parent directory even if the filesystem defines it's own ->permission(). In some situations (sshfs, mountlo, etc) the user does have permission to delete a file even if the attribute based checking would not allow it. So work around this by storing the permission bits separately and returning them in stat(), but cutting the permission bits off from inode->i_mode. This is slightly hackish, but it's probably not worth it to add new infrastructure in VFS and a slight performance penalty for all filesystems, just for the sake of fuse. [Jan Engelhardt] cosmetic fixes Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
fuse_permission() didn't refresh inode attributes before using them, even if the validity has already expired. Thanks to Junjiro Okajima for spotting this. Also remove some old code to unconditionally refresh the attributes on the root inode. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
Make lifetime of 'struct fuse_file' independent from 'struct file' by adding a reference counter and destructor. This will enable asynchronous page writeback, where it cannot be guaranteed, that the file is not released while a request with this file handle is being served. The actual RELEASE request is only sent when there are no more references to the fuse_file. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
Use wake_up_all instead of wake_up in put_reserved_req(), otherwise it is possible that the right task is not woken up. Also create a separate reserved_req_waitq in addition to the blocked_waitq, since they fulfill totally separate functions. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
Set the read and write congestion state if the request queue is close to blocking, and clear it when it's not. This prevents unnecessary blocking in readahead and (when writable mmaps are allowed) writeback. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 4月, 2007 1 次提交
-
-
由 Timo Savola 提交于
If rootmode isn't valid, we hit the BUG() in fuse_init_inode. Now EINVAL is returned. Signed-off-by: NTimo Savola <tsavola@movial.fi> Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 12月, 2006 2 次提交
-
-
由 Miklos Szeredi 提交于
Add a DESTROY operation for block device based filesystems. With the help of this operation, such a filesystem can flush dirty data to the device synchronously before the umount returns. This is needed in situations where the filesystem is assumed to be clean immediately after unmount (e.g. ejecting removable media). Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Add support for the BMAP operation for block device based filesystems. This is needed to support swap-files and lilo. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 10月, 2006 1 次提交
-
-
由 Miklos Szeredi 提交于
Fuse considered it an error (EIO) if lookup returned a directory inode, to which a dentry already refered. This is because directory aliases are not allowed. But in a network filesystem this could happen legitimately, if a directory is moved on a remote client. This patch attempts to relax the restriction by trying to first evict the offending alias from the cache. If this fails, it still returns an error (EBUSY). A rarer situation is if an mkdir races with an indenpendent lookup, which finds the newly created directory already moved. In this situation the mkdir should return success, but that would be incorrect, since the dentry cannot be instantiated, so return EBUSY. Previously checking for a directory alias and instantiation of the dentry weren't done atomically in lookup/mkdir, hence two such calls racing with each other could create aliased directories. To prevent this introduce a new per-connection mutex: fuse_conn->inst_mutex, which is taken for instantiations with a directory inode. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 8月, 2006 1 次提交
-
-
由 Miklos Szeredi 提交于
It is entirely possible (though rare) that jiffies half-wraps around, while a dentry/inode remains in the cache. This could mean that the dentry/inode is not invalidated for another half wraparound-time. To get around this problem, use 64-bit jiffies. The only problem with this is that dentry->d_time is 32 bits on 32-bit archs. So use d_fsdata as the high 32 bits. This is an ugly hack, but far simpler, than having to allocate private data just for this purpose. Since 64-bit jiffies can be assumed never to wrap around, simple comparison can be used, and a zero time value can represent "invalid". Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 6月, 2006 7 次提交
-
-
由 Miklos Szeredi 提交于
VFS uses current->files pointer as lock owner ID, and it wouldn't be prudent to expose this value to userspace. So scramble it with XTEA using a per connection random key, known only to the kernel. Only one direction needs to be implemented, since the ID is never sent in the reverse direction. The XTEA algorithm is implemented inline since it's simple enough to do so, and this adds less complexity than if the crypto API were used. Thanks to Jesper Juhl for the idea. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Add synchronous request interruption. This is needed for file locking operations which have to be interruptible. However filesystem may implement interruptibility of other operations (e.g. like NFS 'intr' mount option). Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Rename the 'interrupted' flag to 'aborted', since it indicates exactly that, and next patch will introduce an 'interrupted' flag for a Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
All POSIX locks owned by the current task are removed on close(). If the FLUSH request resulting initiated by close() fails to reach userspace, there might be locks remaining, which cannot be removed. The only reason it could fail, is if allocating the request fails. In this case use the request reserved for RELEASE, or if that is currently used by another FLUSH, wait for it to become available. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
This patch adds POSIX file locking support to the fuse interface. This implementation doesn't keep any locking state in kernel. Unlocking on close() is handled by the FLUSH message, which now contains the lock owner id. Mandatory locking is not supported. The filesystem may enfoce mandatory locking in userspace if needed. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Add a control filesystem to fuse, replacing the attributes currently exported through sysfs. An empty directory '/sys/fs/fuse/connections' is still created in sysfs, and mounting the control filesystem here provides backward compatibility. Advantages of the control filesystem over the previous solution: - allows the object directory and the attributes to be owned by the filesystem owner, hence letting unpriviled users abort the filesystem connection - does not suffer from module unload race [akpm@osdl.org: fix this fs for recent dhowells depredations] [akpm@osdl.org: fix 64-bit printk warnings] Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Don't put requests into the background when a fatal interrupt occurs while the request is in userspace. This removes a major wart from the implementation. Backgrounding of requests was introduced to allow breaking of deadlocks. However now the same can be achieved by aborting the filesystem through the 'abort' sysfs attribute. This is a change in the interface, but should not cause problems, since these kinds of deadlocks never happen during normal operation. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 4月, 2006 1 次提交
-
-
由 Miklos Szeredi 提交于
This reverts 73ce8355 commit. It was wrong, because it didn't take into account the requirement, that iput() for background requests must be performed synchronously with ->put_super(), otherwise active inodes may remain after unmount. The right solution is to keep the sbput_sem and perform iput() within the locked region, but move fput() outside sbput_sem. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
-
- 12 4月, 2006 2 次提交
-
-
由 Miklos Szeredi 提交于
Properly accounting the number of waiting requests was forgotten in "clean up request accounting" patch. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
-
由 Miklos Szeredi 提交于
A deadlock was possible, when the last reference to the superblock was held due to a background request containing a file reference. Releasing the file would release the vfsmount which in turn would release the superblock. Since sbput_sem is held during the fput() and fuse_put_super() tries to acquire this same semaphore, a deadlock results. The chosen soltuion is to get rid of sbput_sem, and instead use the spinlock to ensure the referenced inodes/file are released only once. Since the actual release may sleep, defer these outside the locked region, but using local variables instead of the structure members. This is a much more rubust solution. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
-
- 11 4月, 2006 4 次提交
-
-
由 Miklos Szeredi 提交于
The previous patch removed limiting the number of outstanding requests. This patch adds a much simpler limiting, that is also compatible with file locking operations. A task may have at most one synchronous request allocated. So these requests need not be otherwise limited. However the number of background requests (release, forget, asynchronous reads, interrupted requests) can grow indefinitely. This can be used by a malicous user to cause FUSE to allocate arbitrary amounts of unswappable kernel memory, denying service. For this reason add a limit for the number of background requests, and block allocations of new requests until the number goes bellow the limit. Also use this mechanism to block all requests until the INIT reply is received. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
FUSE allocated most requests from a fixed size pool filled at mount time. However in some cases (release/forget) non-pool requests were used. File locking operations aren't well served by the request pool, since they may block indefinetly thus exhausting the pool. This patch removes the request pool and always allocates requests on demand. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Remove the global spinlock in favor of a per-mount one. This patch is basically find & replace. The difficult part has already been done by the previous patch. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This adds asynchronous notification to FUSE - a FUSE server can request O_ASYNC on a /dev/fuse file descriptor and receive SIGIO when there is input available. One subtlety - fuse_dev_fasync, which is called when O_ASYNC is requested, does no locking, unlink the other methods. I think it's unnecessary, as the fuse_conn.fasync list is manipulated only by fasync_helper and kill_fasync, which provide their own locking. It would also be wrong to use the fuse_lock, as it's a spin lock and fasync_helper can sleep. My one concern with this is the fuse_conn going away underneath fuse_dev_fasync - sys_fcntl takes a reference on the file struct, so this seems not to be a problem. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 3月, 2006 1 次提交
-
-
由 Arjan van de Ven 提交于
This is a conversion to make the various file_operations structs in fs/ const. Basically a regexp job, with a few manual fixups The goal is both to increase correctness (harder to accidentally write to shared datastructures) and reducing the false sharing of cachelines with things that get dirty in .data (while .rodata is nicely read only and thus cache clean) Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 2月, 2006 1 次提交
-
-
由 Miklos Szeredi 提交于
While asynchronous reads mean a performance improvement in most cases, if the filesystem assumed that reads are synchronous, then async reads may degrade performance (filesystem may receive reads out of order, which can confuse it's own readahead logic). With sshfs a 1.5 to 4 times slowdown can be measured. There's also a need for userspace filesystems to know whether asynchronous reads are supported by the kernel or not. To achive these, negotiate in the INIT request whether async reads will be used and the maximum readahead value. Update interface version to 7.6 If userspace uses a version earlier than 7.6, then disable async reads, and set maximum readahead value to the maximum read size, as done in previous versions. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 1月, 2006 10 次提交
-
-
由 Miklos Szeredi 提交于
Fix race in setting bitfields of fuse_conn. Spotted by Andrew Morton. The two fields ->connected and ->mounted were always changed with the fuse_lock held. But other bitfields in the same structure were changed without the lock. In theory this could lead to losing the assignment of even the ones under lock. The chosen solution is to change these two fields to be a full unsigned type. The other bitfields aren't "important" enough to warrant the extra complexity of full locking or changing them to bitops. For all bitfields document why they are safe wrt. concurrent assignments. Also make the initialization of the 'num_waiting' atomic counter explicit. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Add a separate function for filling in the READ request. This will make it possible to send asynchronous READ requests as well as synchronous ones. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Now the INIT requests can be completely handled in inode.c and the fuse_send_init() function need not be global any more. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Add possibility for requests to run asynchronously and call an 'end' callback when finished. With this, the special handling of the INIT and RELEASE requests can be cleaned up too. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Add ability to abort a filesystem connection. With the introduction of asynchronous reads, the ability to interrupt any request is not enough to dissolve deadlocks, since now waiting for the request completion (page unlocked) is independent of the actual request, so in a deadlock all threads will be uninterruptible. The solution is to make it possible to abort all requests, even those currently undergoing I/O to/from userspace. The natural interface for this is 'mount -f mountpoint', but that only works as long as the filesystem is attached. So also add an 'abort' attribute to the sysfs view of the connection. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
This patch adds the 'waiting' attribute which indicates how many filesystem requests are currently waiting to be completed. A non-zero value without any filesystem activity indicates a hung or deadlocked filesystem. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Kobjectify fuse_conn, and make it visible under /sys/fs/fuse/connections. Lacking any natural naming, connections are numbered. This patch doesn't add any attributes, just the infrastructure. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
The ->connected flag for a fuse_conn object previously only indicated whether the device file for this connection is currently open or not. Change it's meaning so that it indicates whether the connection is active or not: now either umount or device release will clear the flag. The separate ->mounted flag is still needed for handling background requests. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Create a new list for requests in the process of being transfered to/from userspace. This will be needed to be able to abort all requests even those currently under I/O Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
The state of request was made up of 2 bitfields (->sent and ->finished) and of the fact that the request was on a list or not. Unify this into a single state field. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-