Fix the kernel call initiation to set the minimum security level for kernel
initiated calls (such as from kAFS) from the sockopt value.

Fixes: 19ffa01c ("rxrpc: Use structs to hold connection params and protocol info")
Signed-off-by: NDavid Howells <dhowells@redhat.com>

AF_RXRPC tries to turn on IP_RECVERR and IP_MTU_DISCOVER on the UDP socket
it just opened for communications with the outside world, regardless of the
type of socket.  Unfortunately, this doesn't work with an AF_INET6 socket.

Fix this by turning on IPV6_RECVERR and IPV6_MTU_DISCOVER instead if the
socket is of the AF_INET6 family.

Without this, kAFS server and address rotation doesn't work correctly
because the algorithm doesn't detect received network errors.

Fixes: 75b54cb5 ("rxrpc: Add IPv6 support")
Signed-off-by: NDavid Howells <dhowells@redhat.com>

The expect_rx_by call timeout is supposed to be set when a call is started
to indicate that we need to receive a packet by that point.  This is
currently put back every time we receive a packet, but it isn't started
when we first send a packet.  Without this, the call may wait forever if
the server doesn't deign to reply.

Fix this by setting the timeout upon a successful UDP sendmsg call for the
first DATA packet.  The timeout is initiated only for initial transmission
and not for subsequent retries as we don't want the retry mechanism to
extend the timeout indefinitely.

Fixes: a158bdd3 ("rxrpc: Fix call timeouts")
Reported-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

There are follow comment errors:
1 The function name is wrong in p9_release_pages() comment.
2 The function name and variable name is wrong in p9_poll_workfn() comment.
3 There is no variable dm_mr and lkey in struct p9_trans_rdma.
4 The function name is wrong in rdma_create_trans() comment.
5 There is no variable initialized in struct virtio_chan.
6 The variable name is wrong in p9_virtio_zc_request() comment.
Signed-off-by: NSun Lianwen <sunlw.fnst@cn.fujitsu.com>
Reviewed-by: NRandy Dunlap <rdunlap@infradead.org>
Reviewed-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit a92a0849 "r8169: improve runtime pm in general and
suspend unused ports" interfaces w/o link are runtime-suspended after
10s. On systems where drivers take longer to load this can lead to the
situation that the interface is runtime-suspended already when it's
initially brought up.
This shouldn't be a problem because rtl_open() resumes MAC/PHY.
However with at least one chip version the interface doesn't properly
come up, as reported here:
https://bugzilla.kernel.org/show_bug.cgi?id=199549

The vendor driver uses a delay to give certain chip versions some
time to resume before starting the PHY configuration. So let's do
the same. I don't know which chip versions may be affected,
therefore apply this delay always.

This patch was reported to fix the issue for RTL8168h.
I was able to reproduce the issue on an Asus H310I-Plus which also
uses a RTL8168h. Also in my case the patch fixed the issue.
Reported-by: NSlava Kardakov <ojab@ojab.ru>
Tested-by: NSlava Kardakov <ojab@ojab.ru>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.17-20180508' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2018-05-08

this is a pull request for 7 patches for net/master.

The first patch is by Jakob Unterwurzacher and increases the severity of
bus-off messages in the generic CAN device infrastructure. The next two patches
are by Uwe Kleine-König and fix the endianess detection in the flexcan driver.
Jimmy Assarsson's patch for the kvaser driver corrects the stats counter for
dropped tx-messages. Geert Uytterhoeven provides one patch and Sergei Shtylyov
two patches for the rcan_canfd device tree binding description.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'ieee802154-for-davem-2018-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 2018-05-08

An update from ieee802154 for your *net* tree.

Two fixes for the mcr20a driver, which was being added in the 4.17 merge window,
by Gustavo and myself.
The atusb driver got a change to GFP_KERNEL where no GFP_ATOMIC is needed by
Jia-Ju.

The last and most important fix is from Alex to get IPv6 reassembly working
again for the ieee802154 6lowpan adaptation. This got broken in 4.16 so please
queue this one also up for the 4.16 stable tree.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Document the R-Car V3H (R8A77980) SoC support in the R-Car CAN-FD bindings.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Document the R-Car V3M (R8A77970) SoC support in the R-Car CAN-FD bindings.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NRamesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

R8A7796 is R-Car M3-W.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Increase rx_dropped, if alloc_can_skb() fails, not tx_dropped.
Signed-off-by: NJimmy Assarsson <extja@kvaser.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Commit d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx
series dts") removed the fallback compatible "fsl,p1010-flexcan" from
the imx device trees. As the flexcan cores on i.MX25, i.MX35 and i.MX53
are identical, introduce the first as fallback for the two latter ones.

Fixes: d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx series dts")
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.16
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

In commit 88462d2a ("can: flexcan: Remodel FlexCAN register r/w APIs
for big endian FlexCAN controllers.") the following logic was
implemented:

	if the dt property "big-endian" is given or
	   the device is compatible to "fsl,p1010-flexcan":
		use big-endian mode;
	else
		use little-endian mode;

This relies on commit d50f4630 ("arm: dts: Remove p1010-flexcan
compatible from imx series dts") which was applied a few commits later.
Without this commit (or an old device tree used for booting a new
kernel) the flexcan devices on i.MX25, i.MX28, i.MX35 and i.MX53 match
the 'the device is compatible to "fsl,p1010-flexcan"' test and so are
switched erroneously to big endian mode.

Instead of the check above put a quirk in devtype data and rely on
of_match_device yielding the most compatible match

Fixes: 88462d2a ("can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN controllers.")
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: NGavin Schenk <g.schenk@eckelmann.de>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.16
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

bus-off is usually caused by hardware malfunction or configuration error
(baud rate mismatch) and causes a complete loss of communication.

Increase the "bus-off" message's severity from netdev_dbg() to
netdev_info() to make it visible to the user.

A can interface going into bus-off is similar in severity to ethernet's
"Link is Down" message, which is also printed at info level.

It is debatable whether the the "restarted" message should also be
changed to netdev_info() to make the interface state changes
comprehensible from the kernel log. I have chosen to keep the
"restarted" message at dbg for now as the "bus-off" message should be
enough for the user to notice and investigate the problem.
Signed-off-by: NJakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Cc: linux-can@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

syzbot loves to set very small mtu on devices, since it brings joy.
We must make llc_ui_sendmsg() fool proof.

usercopy: Kernel memory overwrite attempt detected to wrapped address (offset 0, size 18446612139802320068)!

kernel BUG at mm/usercopy.c:100!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 17464 Comm: syz-executor1 Not tainted 4.17.0-rc3+ #36
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:usercopy_abort+0xbb/0xbd mm/usercopy.c:88
RSP: 0018:ffff8801868bf800 EFLAGS: 00010282
RAX: 000000000000006c RBX: ffffffff87d2fb00 RCX: 0000000000000000
RDX: 000000000000006c RSI: ffffffff81610731 RDI: ffffed0030d17ef6
RBP: ffff8801868bf858 R08: ffff88018daa4200 R09: ffffed003b5c4fb0
R10: ffffed003b5c4fb0 R11: ffff8801dae27d87 R12: ffffffff87d2f8e0
R13: ffffffff87d2f7a0 R14: ffffffff87d2f7a0 R15: ffffffff87d2f7a0
FS:  00007f56a14ac700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2bc21000 CR3: 00000001abeb1000 CR4: 00000000001426f0
DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000030602
Call Trace:
 check_bogus_address mm/usercopy.c:153 [inline]
 __check_object_size+0x5d9/0x5d9 mm/usercopy.c:256
 check_object_size include/linux/thread_info.h:108 [inline]
 check_copy_size include/linux/thread_info.h:139 [inline]
 copy_from_iter_full include/linux/uio.h:121 [inline]
 memcpy_from_msg include/linux/skbuff.h:3305 [inline]
 llc_ui_sendmsg+0x4b1/0x1530 net/llc/af_llc.c:941
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:639
 __sys_sendto+0x3d7/0x670 net/socket.c:1789
 __do_sys_sendto net/socket.c:1801 [inline]
 __se_sys_sendto net/socket.c:1797 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x455979
RSP: 002b:00007f56a14abc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f56a14ac6d4 RCX: 0000000000455979
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000018
RBP: 000000000072bea0 R08: 00000000200012c0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000548 R14: 00000000006fbf60 R15: 0000000000000000
Code: 55 c0 e8 c0 55 bb ff ff 75 c8 48 8b 55 c0 4d 89 f9 ff 75 d0 4d 89 e8 48 89 d9 4c 89 e6 41 56 48 c7 c7 80 fa d2 87 e8 a0 0b a3 ff <0f> 0b e8 95 55 bb ff e8 c0 a8 f7 ff 8b 95 14 ff ff ff 4d 89 e8
RIP: usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: ffff8801868bf800

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Igor Russkikh says:

====================
Aquantia various patches 2018-05

These are two patches covering issues found during test cycles:

First is that driver should declare valid vlan_features
Second fix is about correct allocation of MSI interrupts on some systems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver should use pci_alloc_irq_vectors return value to correct number
of allocated vectors and napi instances. Otherwise it'll panic later
in pci_irq_vector.

Driver also should allow more than one MSI vectors to be allocated.

Error return path from pci_alloc_irq_vectors is also fixed to revert
resources in a correct sequence when error happens.
Reported-by: NLong, Nicholas <nicholas.a.long@baesystems.com>
Fixes: 23ee07ad ("net: aquantia: Cleanup pci functions module")
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In particular, not reporting SG forced skbs to be linear for vlan
interfaces over atlantic NIC.

With this fix it is possible to enable SG feature on device and
therefore optimize performance.
Reported-by: NMa Yuying <yuma@redhat.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes "experimental" from the help text where depends on
CONFIG_EXPERIMENTAL was already removed.
Signed-off-by: NGeorg Hofmann <georg@hofmannsweb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace my old E-Mail address with a working one.
While at it, change the maintainance status to
'Odd Fixes'. I'm still around with some knowledge,
but don't actively maintain it anymore.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2018-05-07

1) Always verify length of provided sadb_key to fix a
   slab-out-of-bounds read in pfkey_add. From Kevin Easton.

2) Make sure that all states are really deleted
   before we check that the state lists are empty.
   Otherwise we trigger a warning.

3) Fix MTU handling of the VTI6 interfaces on
   interfamily tunnels. From Stefano Brivio.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the case of writing a partial tls record we forgot to clear the
ctx->in_tcp_sendpages flag, causing some connections to stall.

Fixes: c212d2c7 ("net/tls: Don't recursively call push_record during tls_write_space callbacks")
Signed-off-by: NAndre Tomt <andre@tomt.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most of the mv88e6xxx switches have the PHYs at address 0, 1, 2, ...
The 6341 however has the PHYs at 0x10, 0x11, 0x12. Add a parameter to
the info structure for this base address.

Testing of 6f88284f ("net: dsa: mv88e6xxx: Add MDIO interrupts for
internal PHYs") was performed on the 6341. So it works only on the
6341. Use this base information to correctly set the interrupt.

Fixes: 6f88284f ("net: dsa: mv88e6xxx: Add MDIO interrupts for internal PHYs")
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzbot reported a use-after-free in tls_sk_proto_close

Add a boolean value to cleanup a bit this function.

BUG: KASAN: use-after-free in tls_sk_proto_close+0x8ab/0x9c0 net/tls/tls_main.c:297
Read of size 1 at addr ffff8801ae40a858 by task syz-executor363/4503

CPU: 0 PID: 4503 Comm: syz-executor363 Not tainted 4.17.0-rc3+ #34
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
 tls_sk_proto_close+0x8ab/0x9c0 net/tls/tls_main.c:297
 inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427
 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460
 sock_release+0x96/0x1b0 net/socket.c:594
 sock_close+0x16/0x20 net/socket.c:1149
 __fput+0x34d/0x890 fs/file_table.c:209
 ____fput+0x15/0x20 fs/file_table.c:243
 task_work_run+0x1e4/0x290 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x1aee/0x2730 kernel/exit.c:865
 do_group_exit+0x16f/0x430 kernel/exit.c:968
 get_signal+0x886/0x1960 kernel/signal.c:2469
 do_signal+0x98/0x2040 arch/x86/kernel/signal.c:810
 exit_to_usermode_loop+0x28a/0x310 arch/x86/entry/common.c:162
 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
 do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4457b9
RSP: 002b:00007fdf4d766da8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00000000006dac3c RCX: 00000000004457b9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000006dac3c
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dac38
R13: 3692738801137283 R14: 6bf92c39443c4c1d R15: 0000000000000006

Allocated by task 4498:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
 kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620
 kmalloc include/linux/slab.h:512 [inline]
 kzalloc include/linux/slab.h:701 [inline]
 create_ctx net/tls/tls_main.c:521 [inline]
 tls_init+0x1f9/0xb00 net/tls/tls_main.c:633
 tcp_set_ulp+0x1bc/0x520 net/ipv4/tcp_ulp.c:153
 do_tcp_setsockopt.isra.39+0x44a/0x2600 net/ipv4/tcp.c:2588
 tcp_setsockopt+0xc1/0xe0 net/ipv4/tcp.c:2893
 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3039
 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903
 __do_sys_setsockopt net/socket.c:1914 [inline]
 __se_sys_setsockopt net/socket.c:1911 [inline]
 __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 4503:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
 __cache_free mm/slab.c:3498 [inline]
 kfree+0xd9/0x260 mm/slab.c:3813
 tls_sw_free_resources+0x2a3/0x360 net/tls/tls_sw.c:1037
 tls_sk_proto_close+0x67c/0x9c0 net/tls/tls_main.c:288
 inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427
 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460
 sock_release+0x96/0x1b0 net/socket.c:594
 sock_close+0x16/0x20 net/socket.c:1149
 __fput+0x34d/0x890 fs/file_table.c:209
 ____fput+0x15/0x20 fs/file_table.c:243
 task_work_run+0x1e4/0x290 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x1aee/0x2730 kernel/exit.c:865
 do_group_exit+0x16f/0x430 kernel/exit.c:968
 get_signal+0x886/0x1960 kernel/signal.c:2469
 do_signal+0x98/0x2040 arch/x86/kernel/signal.c:810
 exit_to_usermode_loop+0x28a/0x310 arch/x86/entry/common.c:162
 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
 do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8801ae40a800
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 88 bytes inside of
 256-byte region [ffff8801ae40a800, ffff8801ae40a900)
The buggy address belongs to the page:
page:ffffea0006b90280 count:1 mapcount:0 mapping:ffff8801ae40a080 index:0x0
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffff8801ae40a080 0000000000000000 000000010000000c
raw: ffffea0006bea9e0 ffffea0006bc94a0 ffff8801da8007c0 0000000000000000
page dumped because: kasan: bad access detected

Fixes: dd0bed16 ("tls: support for Inline tls record")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Atul Gupta <atul.gupta@chelsio.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Ilya Lesokhin <ilyal@mellanox.com>
Cc: Aviad Yehezkel <aviadye@mellanox.com>
Cc: Dave Watson <davejwatson@fb.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now sctp only delays the authentication for the normal cookie-echo
chunk by setting chunk->auth_chunk in sctp_endpoint_bh_rcv(). But
for the duplicated one with auth, in sctp_assoc_bh_rcv(), it does
authentication first based on the old asoc, which will definitely
fail due to the different auth info in the old asoc.

The duplicated cookie-echo chunk will create a new asoc with the
auth info from this chunk, and the authentication should also be
done with the new asoc's auth info for all of the collision 'A',
'B' and 'D'. Otherwise, the duplicated cookie-echo chunk with auth
will never pass the authentication and create the new connection.

This issue exists since very beginning, and this fix is to make
sctp_assoc_bh_rcv() follow the way sctp_endpoint_bh_rcv() does
for the normal cookie-echo chunk to delay the authentication.

While at it, remove the unused params from sctp_sf_authenticate()
and define sctp_auth_chunk_verify() used for all the places that
do the delayed authentication.

v1->v2:
  fix the typo in changelog as Marcelo noticed.
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes the following warnings:
warning: pointer targets in passing argument 1 of
‘is_valid_ether_addr’ differ in signedness [-Wpointer-sign]
  if (mac_addr && is_valid_ether_addr(mac_addr)) {
                                      ^~~~~~~~
expected ‘const u8 * {aka const unsigned char *}’ but argument
is of type ‘const char *’
 static inline bool is_valid_ether_addr(const u8 *addr)
                    ^~~~~~~~~~~~~~~~~~~
warning: pointer targets in passing argument 2 of
‘ether_addr_copy’ differ in signedness [-Wpointer-sign]
   ether_addr_copy(ndev->dev_addr, mac_addr);
                                   ^~~~~~~~
expected ‘const u8 * {aka const unsigned char *}’ but argument
is of type ‘const char *’
 static inline void ether_addr_copy(u8 *dst, const u8 *src)
Signed-off-by: NMoritz Fischer <mdf@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix issue where nixge_get_nvmem_address() returns a non-NULL
return value on a failed nvmem_cell_get() that causes an invalid
access when error value encoded in pointer is dereferenced.

Furthermore ensure that buffer allocated by nvmem_cell_read()
actually gets kfreed() if the function succeeds.

Fixes commit 492caffa ("net: ethernet: nixge: Add support for
National Instruments XGE netdev")
Reported-by: NAlex Williams <alex.williams@ni.com>
Signed-off-by: NMoritz Fischer <mdf@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a script file that isn't generated uses the variable
TEST_GEN_PROGS_EXTENDED and a 'make -C tools/testing/selftests clean' is
performed the script file gets removed and git shows the file as
deleted. For script files that isn't generated TEST_PROGS_EXTENDED
should be used.

Fixes: 9faedd64 ("selftests: net: add in_netns.sh TEST_GEN_PROGS_EXTENDED")
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Johan Hedberg says:

====================
pull request: bluetooth 2018-05-07

Here are a few more Bluetooth fixes for the 4.17 kernel, all for the
btusb driver. Two relate to the needs_reset_resume table, and one is a
revert of a patch for Atheros 1525/QCA6174 which caused a regression for
some people.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-05-05

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Sanitize attr->{prog,map}_type from bpf(2) since used as an array index
   to retrieve prog/map specific ops such that we prevent potential out of
   bounds value under speculation, from Mark and Daniel.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In an SFP EEPROM values can be read to get information about a given SFP
module. One of those is the bitrate, which can be determined using a
nominal bitrate in addition with min and max values (in %). The SFP code
currently compute both BR,min and BR,max values thanks to this nominal
and min,max values.

This patch fixes the BR,min computation as the min value should be
subtracted to the nominal one, not added.

Fixes: 9962acf7 ("sfp: add support for 1000Base-PX and 1000Base-BX10")
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, skb->len and skb->data_len are set to the page size, not
the packet size. This causes the frame check sequence to not be
located at the "end" of the packet resulting in ethernet frame check
errors. The driver does work currently, but stricter kernel facing
networking solutions like OpenVSwitch will drop these packets as
invalid.

These changes set the packet size correctly so that these errors no
longer occur. The length does not include the frame check sequence, so
that subtraction was removed.

Tested on Oracle/SUN Multithreaded 10-Gigabit Ethernet Network
Controller [108e:abcd] and validated in wireshark.
Signed-off-by: NRob Taglang <rob@taglang.io>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Making sure the headers line up properly with the actual value output of the command
`cat /proc/net/netlink`

Before the patch:
<sk       Eth Pid    Groups   Rmem     Wmem     Dump     Locks     Drops     Inode
<ffff8cd2c2f7b000 0   909    00000550 0        0        0 2        0        18946

After the patch:
>sk               Eth Pid        Groups   Rmem     Wmem     Dump  Locks    Drops    Inode
>0000000033203952 0   897        00000113 0        0        0     2        0        14906
Signed-off-by: NBo YU <tsu.yubo@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tg3_free_consistent() calls dma_free_coherent() to free tp->hw_stats
under spinlock and can trigger BUG_ON() in vunmap() because vunmap()
may sleep.  Fix it by removing the spinlock and relying on the
TG3_FLAG_INIT_COMPLETE flag to prevent race conditions between
tg3_get_stats64() and tg3_free_consistent().  TG3_FLAG_INIT_COMPLETE
is always cleared under tp->lock before tg3_free_consistent()
and therefore tg3_get_stats64() can safely access tp->hw_stats
under tp->lock if TG3_FLAG_INIT_COMPLETE is set.

Fixes: f5992b72 ("tg3: Fix race condition in tg3_get_stats64().")
Reported-by: NZumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzbot caught an infinite recursion in nsh_gso_segment().

Problem here is that we need to make sure the NSH header is of
reasonable length.

BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48  max: 48!
48 locks held by syz-executor0/10189:
 #0:         (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517
 #1:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #1:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #2:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #2:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #3:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #3:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #4:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #4:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #5:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #5:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #6:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #6:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #7:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #7:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #8:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #8:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #9:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #9:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #10:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #10:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #11:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #11:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #12:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #12:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #13:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #13:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #14:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #14:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #15:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #15:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #16:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #16:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #17:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #17:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #18:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #18:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #19:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #19:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #20:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #20:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #21:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #21:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #22:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #22:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #23:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #23:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #24:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #24:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #25:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #25:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #26:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #26:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #27:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #27:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #28:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #28:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #29:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #29:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #30:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #30:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #31:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #31:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
dccp_close: ABORT with 65423 bytes unread
 #32:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #32:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #33:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #33:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #34:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #34:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #35:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #35:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #36:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #36:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #37:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #37:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #38:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #38:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #39:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #39:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #40:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #40:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #41:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #41:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #42:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #42:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #43:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #43:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #44:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #44:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #45:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #45:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #46:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #46:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #47:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #47:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
INFO: lockdep is turned off.
CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #26
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449
 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920
 rcu_lock_acquire include/linux/rcupdate.h:246 [inline]
 rcu_read_lock include/linux/rcupdate.h:632 [inline]
 skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865
 skb_gso_segment include/linux/netdevice.h:4025 [inline]
 validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118
 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168
 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312
 qdisc_restart net/sched/sch_generic.c:399 [inline]
 __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410
 __dev_xmit_skb net/core/dev.c:3243 [inline]
 __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616
 packet_snd net/packet/af_packet.c:2951 [inline]
 packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:639
 __sys_sendto+0x3d7/0x670 net/socket.c:1789
 __do_sys_sendto net/socket.c:1801 [inline]
 __se_sys_sendto net/socket.c:1797 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: c411ed85 ("nsh: add GSO support")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jiri Benc <jbenc@redhat.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Acked-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ioc_data.dev_num can be controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:
net/atm/lec.c:702 lec_vcc_attach() warn: potential spectre issue
'dev_lec'

Fix this by sanitizing ioc_data.dev_num before using it to index
dev_lec. Also, notice that there is another instance in which array
dev_lec is being indexed using ioc_data.dev_num at line 705:
lec_vcc_added(netdev_priv(dev_lec[ioc_data.dev_num]),

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pool can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/atm/zatm.c:1462 zatm_ioctl() warn: potential spectre issue
'zatm_dev->pool_info' (local cap)

Fix this by sanitizing pool before using it to index
zatm_dev->pool_info

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an OVS_ATTR_NESTED attribute type is found while walking
through netlink attributes, we call nlattr_set() recursively
passing the length table for the following nested attributes, if
different from the current one.

However, once we're done with those sub-nested attributes, we
should continue walking through attributes using the current
table, instead of using the one related to the sub-nested
attributes.

For example, given this sequence:

1  OVS_KEY_ATTR_PRIORITY
2  OVS_KEY_ATTR_TUNNEL
3	OVS_TUNNEL_KEY_ATTR_ID
4	OVS_TUNNEL_KEY_ATTR_IPV4_SRC
5	OVS_TUNNEL_KEY_ATTR_IPV4_DST
6	OVS_TUNNEL_KEY_ATTR_TTL
7	OVS_TUNNEL_KEY_ATTR_TP_SRC
8	OVS_TUNNEL_KEY_ATTR_TP_DST
9  OVS_KEY_ATTR_IN_PORT
10 OVS_KEY_ATTR_SKB_MARK
11 OVS_KEY_ATTR_MPLS

we switch to the 'ovs_tunnel_key_lens' table on attribute #3,
and we don't switch back to 'ovs_key_lens' while setting
attributes #9 to #11 in the sequence. As OVS_KEY_ATTR_MPLS
evaluates to 21, and the array size of 'ovs_tunnel_key_lens' is
15, we also get this kind of KASan splat while accessing the
wrong table:

[ 7654.586496] ==================================================================
[ 7654.594573] BUG: KASAN: global-out-of-bounds in nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.603214] Read of size 4 at addr ffffffffc169ecf0 by task handler29/87430
[ 7654.610983]
[ 7654.612644] CPU: 21 PID: 87430 Comm: handler29 Kdump: loaded Not tainted 3.10.0-866.el7.test.x86_64 #1
[ 7654.623030] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016
[ 7654.631379] Call Trace:
[ 7654.634108]  [<ffffffffb65a7c50>] dump_stack+0x19/0x1b
[ 7654.639843]  [<ffffffffb53ff373>] print_address_description+0x33/0x290
[ 7654.647129]  [<ffffffffc169b37b>] ? nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.654607]  [<ffffffffb53ff812>] kasan_report.part.3+0x242/0x330
[ 7654.661406]  [<ffffffffb53ff9b4>] __asan_report_load4_noabort+0x34/0x40
[ 7654.668789]  [<ffffffffc169b37b>] nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.676076]  [<ffffffffc167ef68>] ovs_nla_get_match+0x10c8/0x1900 [openvswitch]
[ 7654.684234]  [<ffffffffb61e9cc8>] ? genl_rcv+0x28/0x40
[ 7654.689968]  [<ffffffffb61e7733>] ? netlink_unicast+0x3f3/0x590
[ 7654.696574]  [<ffffffffc167dea0>] ? ovs_nla_put_tunnel_info+0xb0/0xb0 [openvswitch]
[ 7654.705122]  [<ffffffffb4f41b50>] ? unwind_get_return_address+0xb0/0xb0
[ 7654.712503]  [<ffffffffb65d9355>] ? system_call_fastpath+0x1c/0x21
[ 7654.719401]  [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370
[ 7654.726298]  [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370
[ 7654.733195]  [<ffffffffb53fe4b5>] ? kasan_unpoison_shadow+0x35/0x50
[ 7654.740187]  [<ffffffffb53fe62a>] ? kasan_kmalloc+0xaa/0xe0
[ 7654.746406]  [<ffffffffb53fec32>] ? kasan_slab_alloc+0x12/0x20
[ 7654.752914]  [<ffffffffb53fe711>] ? memset+0x31/0x40
[ 7654.758456]  [<ffffffffc165bf92>] ovs_flow_cmd_new+0x2b2/0xf00 [openvswitch]

[snip]

[ 7655.132484] The buggy address belongs to the variable:
[ 7655.138226]  ovs_tunnel_key_lens+0xf0/0xffffffffffffd400 [openvswitch]
[ 7655.145507]
[ 7655.147166] Memory state around the buggy address:
[ 7655.152514]  ffffffffc169eb80: 00 00 00 00 00 00 00 00 00 00 fa fa fa fa fa fa
[ 7655.160585]  ffffffffc169ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7655.168644] >ffffffffc169ec80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa fa
[ 7655.176701]                                                              ^
[ 7655.184372]  ffffffffc169ed00: fa fa fa fa 00 00 00 00 fa fa fa fa 00 00 00 05
[ 7655.192431]  ffffffffc169ed80: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
[ 7655.200490] ==================================================================
Reported-by: NHangbin Liu <liuhangbin@gmail.com>
Fixes: 982b5270 ("openvswitch: Fix mask generation for nested attributes.")
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It adds support for BCM89610 (Single-Port 10/100/1000BASE-T)
transceiver which is used in P3310 Tegra186 platform.
Signed-off-by: NBhadram Varka <vbhadram@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>