The Kconfig currently controlling compilation of this code is:

config PINCTRL_AS3722
        bool "Pinctrl and GPIO driver for ams AS3722 PMIC"

...meaning that it currently is not being built as a module by anyone.

During an audit for non-modular drivers using modular infrastructure
this driver showed up.

But rather than demodularize it, Laxman indicated that it would be
prefereable to instead convert the driver option to tristate.

This does that, and confirms that it will compile and modpost as
such.  However, since I do not have the hardware to confirm that
no new runtime issues exist when modular, that remains untested.

Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The Kconfig currently controlling compilation of this code is:

config PINCTRL_PALMAS
        bool "Pinctrl driver for the PALMAS Series MFD devices"

...meaning that it currently is not being built as a module by anyone.

During an audit for non-modular drivers using modular infrastructure
this driver showed up.

But rather than demodularize it, Laxman indicated that it would be
prefereable to instead convert the driver option to tristate.

This does that, and confirms that it will compile and modpost as
such.  However, since I do not have the hardware to confirm that
no new runtime issues exist when modular, that remains untested.

Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

When pinctrl_get() is called for a device, it will return a valid handle
even if the device itself has no pinctrl state entries defined in
device-tree. This is caused by the function pinctrl_dt_to_map() which
will return success even if the first pinctrl state, 'pinctrl-0', is not
found in the device-tree node for a device.

According to the pinctrl device-tree binding documentation, pinctrl
states must be numbered starting from 0 and so 'pinctrl-0' should always
be present if a device uses pinctrl and therefore, if 'pinctrl-0' is not
present it seems valid that we should not return a valid pinctrl handle.

Fix this by returning an error code if the property 'pinctrl-0' is not
present for a device.
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The pinctrl-intel needs to use request_irq() instead of chained interrupt
handling because it shares the interrupt with multiple GPIO host
controllers found on Intel CPUs. In -rt all such interrupts are forced to
run in thread context which triggers following warning:

 WARNING: CPU: 0 PID: 530 at kernel/irq/handle.c:151 handle_irq_event_percpu+0x23d/0x240
 irq 348 handler irq_default_primary_handler+0x0/0x10 enabled interrupts
 Modules linked in:
 CPU: 0 PID: 530 Comm: irq/14-INT3452: Not tainted 4.6.2-rt5 #1060
  0000000000000000 ffff88007a257c98 ffffffff812d8494 ffff88007a257ce8
  0000000000000000 ffff88007a257cd8 ffffffff8105e554 000000977a257d90
  ffff88007a37a380 000000000000015c 0000000000000002 0000000000000000
 Call Trace:
  [<ffffffff812d8494>] dump_stack+0x4f/0x6b
  [<ffffffff8105e554>] __warn+0xe4/0x100
  [<ffffffff8105e5bf>] warn_slowpath_fmt+0x4f/0x60
  [<ffffffff810b18f0>] ? __synchronize_hardirq+0x60/0x60
  [<ffffffff810b17fd>] handle_irq_event_percpu+0x23d/0x240
  [<ffffffff810b1862>] handle_irq_event+0x62/0x90
  [<ffffffff810b4e1f>] handle_edge_irq+0x8f/0x190
  [<ffffffff810b0d82>] generic_handle_irq+0x22/0x30
  [<ffffffff81307abc>] intel_gpio_irq+0xdc/0x150
  [<ffffffff810b2293>] irq_forced_thread_fn+0x23/0x70
  [<ffffffff810b250b>] irq_thread+0x13b/0x1d0
  [<ffffffff8167b844>] ? __schedule+0x2e4/0x5a0
  [<ffffffff810b2270>] ? irq_finalize_oneshot.part.37+0xd0/0xd0
  [<ffffffff810b25a0>] ? irq_thread+0x1d0/0x1d0
  [<ffffffff810b23d0>] ? wake_threads_waitq+0x30/0x30
  [<ffffffff8107e624>] kthread+0xd4/0xf0
  [<ffffffff8167ec27>] ? _raw_spin_unlock_irq+0x17/0x40
  [<ffffffff8167f592>] ret_from_fork+0x22/0x40
  [<ffffffff8107e550>] ? kthread_worker_fn+0x190/0x190

The handle_irq_event_* functions (and I suppose generic_handle_irq()) is
expected to be called with interrupts disabled and they rightfully complain
here because we run in thread context with interrupts enabled.

Fix this by adding IRQF_NO_THREAD flag when the master interrupt is
requested. This prevents forced threading of the interrupt used by the GPIO
host controllers.
Reported-by: NKim Tatt Chuah <kim.tatt.chuah@intel.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

When running -rt kernel and GPIO interrupt happens we get following

 BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:931
 in_atomic(): 1, irqs_disabled(): 0, pid: 530, name: irq/14-INT3452:
 Preemption disabled at:[<ffffffff810b4dab>] handle_edge_irq+0x1b/0x190

 CPU: 0 PID: 530 Comm: irq/14-INT3452: Not tainted 4.6.2-rt5 #1060
  0000000000000000 ffff88007a257d58 ffffffff812d8494 0000000000000000
  ffff88017a330000 ffff88007a257d78 ffffffff81083a11 ffff88007a252430
  ffff88007a252430 ffff88007a257d90 ffffffff8167ef20 000000000000001a
 Call Trace:
  [<ffffffff812d8494>] dump_stack+0x4f/0x6b
  [<ffffffff81083a11>] ___might_sleep+0xe1/0x160
  [<ffffffff8167ef20>] rt_spin_lock+0x20/0x50
  [<ffffffff81308c6d>] intel_gpio_irq_ack+0x2d/0x80
  [<ffffffff810b4e0b>] handle_edge_irq+0x7b/0x190
  [<ffffffff810b0d82>] generic_handle_irq+0x22/0x30
  [<ffffffff81307abc>] intel_gpio_irq+0xdc/0x150
  [<ffffffff810b2293>] irq_forced_thread_fn+0x23/0x70
  [<ffffffff810b250b>] irq_thread+0x13b/0x1d0
  [<ffffffff8167b844>] ? __schedule+0x2e4/0x5a0
  [<ffffffff810b2270>] ? irq_finalize_oneshot.part.37+0xd0/0xd0
  [<ffffffff810b25a0>] ? irq_thread+0x1d0/0x1d0
  [<ffffffff810b23d0>] ? wake_threads_waitq+0x30/0x30
  [<ffffffff8107e624>] kthread+0xd4/0xf0
  [<ffffffff8167ec27>] ? _raw_spin_unlock_irq+0x17/0x40
  [<ffffffff8167f592>] ret_from_fork+0x22/0x40
  [<ffffffff8107e550>] ? kthread_worker_fn+0x190/0x190

The reason why this happens is because intel_gpio_irq_ack() is called with
desc->lock raw_spinlock locked which cannot sleep but our normal spinlock
(which is converted to rtmutex in -rt) is allowed to sleep. This causes
might_sleep() to trigger.

Fix this by converting the normal spinlock to a raw_spinlock.
Reported-by: NKim Tatt Chuah <kim.tatt.chuah@intel.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

These are input-only pins.  They do not support drive controlling
in the first place.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

According to the hardware document, setting the drive control is
prohibited for these pins (N-channel Open Drain pins).  Set their
drive control attribute to "fixed".
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is to cater the need for non-ACPI system whereby
a platform device has to be created in order to bind
with the Apollo Lake Pinctrl GPIO platform driver.
Signed-off-by: NTan Jui Nee <jui.nee.tan@intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The recently added max77620 driver fails to build when CONFIG_PINMUX
is not set:

pinctrl/pinctrl-max77620.c:272:21: error: variable 'max77620_pinmux_ops' has initializer but incomplete type
 static const struct pinmux_ops max77620_pinmux_ops = {
                     ^~~~~~~~~~
pinctrl/pinctrl-max77620.c:273:2: error: unknown field 'get_functions_count' specified in initializer

This adds the Kconfig 'select' statement that was clearly meant
to be there and is used in all other pinmux drivers.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

When building with 'make W=1', we get harmless warnings about
five drivers in drivers/pinctrl, which all contain a copy of
the same line:

drivers/pinctrl/freescale/pinctrl-imx1-core.c:160:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration]

This replaces the somewhat nonstandard 'static const inline'
with 'static inline const', which has the same meaning but
does not cause this warning.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The strucuture 'max77620_cfg_param' is defined but never used by the
max77620 driver. Remove this structure definition.
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Pin config get/set handlers for pin groups were previously not
implemented by this driver.  The pin_config_group_set is
particularly useful for applying a common config setting to all
pins in a specified group with a single call, without the caller
needing to reference each individual pin by name.
Signed-off-by: NDan O'Donovan <dan@emutex.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

On some CHV platforms, we need an option to configure the
open-drain setting for these pins.  This adds support for the
PIN_CONFIG_DRIVE_PUSH_PULL and PIN_CONFIG_DRIVE_OPEN_DRAIN to
disable/enable open-drain mode for a specific pin.
Signed-off-by: NDan O'Donovan <dan@emutex.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Due to a silicon issue on the Atom X5-Z8000 "Cherry Trail" processor
series, a common lock must be used to prevent concurrent accesses
across the 4 GPIO controllers managed by this driver.

See Intel Atom Z8000 Processor Series Specification Update
(Rev. 005), errata #CHT34, for further information.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NDan O'Donovan <dan@emutex.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The PM8058 is found in connection to the APQ8060 on the APQ8060
Dragonboard. Works the same as all others, just add the compatible
string for this variant.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Replace the in order struct initialisation style with explicit field
style.

The Coccinelle semantic patch used to make this change is as follows:

@decl@
identifier i1,fld;
type T;
field list[n] fs;
@@

struct i1 {
 fs
 T fld;
 ...};

@@
identifier decl.i1,i2,decl.fld;
expression e;
position bad.p, bad.fix;
@@

struct i1 i2@p = { ...,
+ .fld = e
- e@fix
 ,...};
Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NAndrew Jeffery <andrew@aj.id.au>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NAndrew Jeffery <andrew@aj.id.au>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NAndrew Jeffery <andrew@aj.id.au>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The array u300_pmx_registers is not declared or used outside
of the driver, so make it static to avoid the following warning:

drivers/pinctrl/pinctrl-u300.c:673:11: warning: symbol 'u300_pmx_registers' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/bcm/Makefile properly builds individual drivers based on
their respective Kconfig symbols. ARCH_BCM is currently a menuconfig
option from arch/arm/mach-bcm/Kconfig, which is fine, but prevents ARM64
platforms which do not have such menuconfig option from building their
pinctrl drivers, so let's get rid of that dependency.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NScott Branden <scott.branden@broadcom.com>
Acked-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

There are five functions in the driver that are defined but
only used locally. Since these are not used in the current
kernel, delete them to avoid the following warnings:

drivers/pinctrl/nomadik/pinctrl-nomadik.c:1036:6: warning: symbol 'nmk_gpio_clocks_enable' was not declared. Should it be static?
drivers/pinctrl/nomadik/pinctrl-nomadik.c:1050:6: warning: symbol 'nmk_gpio_clocks_disable' was not declared. Should it be static?
drivers/pinctrl/nomadik/pinctrl-nomadik.c:1073:6: warning: symbol 'nmk_gpio_wakeups_suspend' was not declared. Should it be static?
drivers/pinctrl/nomadik/pinctrl-nomadik.c:1094:6: warning: symbol 'nmk_gpio_wakeups_resume' was not declared. Should it be static?
drivers/pinctrl/nomadik/pinctrl-nomadik.c:1120:6: warning: symbol 'nmk_gpio_read_pull' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The Kconfig currently controlling compilation of this code is:

drivers/pinctrl/Kconfig:config PINCTRL_AT91PIO4
drivers/pinctrl/Kconfig:        bool "AT91 PIO4 pinctrl driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: linux-gpio@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The Kconfig currently controlling compilation of this code is:

drivers/pinctrl/Kconfig:config PINCTRL_DIGICOLOR
drivers/pinctrl/Kconfig:        bool

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

Cc: linux-gpio@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The Kconfig currently controlling compilation of this code is:

config PINCTRL_ZYNQ
        bool "Pinctrl driver for Xilinx Zynq"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann" <soren.brinkmann@xilinx.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The Kconfig currently controlling compilation of this code is:

config PINCTRL_AMD
        bool "AMD GPIO pin control"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Ken Xue <Ken.Xue@amd.com>
Cc: Jeff Wu <Jeff.Wu@amd.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The Kconfig currently controlling compilation of this code is:

config PINCTRL_LPC18XX
        bool "NXP LPC18XX/43XX SCU pinctrl driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Joachim Eastwood <manabian@gmail.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The Kconfig currently controlling compilation of this code is:

drivers/pinctrl/Kconfig:config PINCTRL_AT91
drivers/pinctrl/Kconfig:        bool "AT91 pinctrl driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init was not being used in this driver, we don't need
to be concerned with initcall ordering changes when removing it.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The Kconfig currently controlling compilation of this code is:

config PINCTRL_BAYTRAIL
        bool "Intel Baytrail GPIO pin control"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_init() was already not in use in this driver, we don't
have any concerns with init ordering changes here.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The atmel_pctl_find_group_by_pin() and the atmel_pinctrl_remove()
functions are not exported, so fix the warnings about these
being exported without definitions by making them static.

drivers/pinctrl/pinctrl-at91-pio4.c:424:20: warning: symbol 'atmel_pctl_find_group_by_pin' was not declared. Should it be static?
drivers/pinctrl/pinctrl-at91-pio4.c:1077:5: warning: symbol 'atmel_pinctrl_remove' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Acked-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Fixup warnings from functions that are not exported and
therefore should be marked static. Fixes:

drivers/pinctrl/bcm/pinctrl-nsp-gpio.c:461:5:
  warning: symbol 'nsp_pin_config_group_get' was not declared.
  Should it be static?
drivers/pinctrl/bcm/pinctrl-nsp-gpio.c:467:5:
  warning: symbol 'nsp_pin_config_group_set' was not declared.
  Should it be static?
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
Acked-by: NRay Jui <ray.jui@broadcom.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

My mistake in the initial support patches.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

An irq which is a wake up source maybe masked unexpectedly if the wake
up source irq was triggered after pinctrl irqchip suspend and before
suspend_device_irqs finished.
Use *_noirq callbacks to guarantee pinctrl irqchip suspend would be
called after suspend_devices_irqs.
Signed-off-by: Nhongkun.cao <hongkun.cao@mediatek.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_map, introduced in
d32f7fd3 ("pinctrl: Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_map")
but not reported into oxnas driver.

Fixes: 611dac1e ("pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver")
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add pin configuration and pinmux support for UniPhier PH1-LD20 SoC.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add pin configuration and pinmux support for UniPhier PH1-LD11 SoC.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Currently, the UniPhier pinctrl driver itself is a syscon, but it
turned out much more reasonable to make it a child node of a syscon
because our syscon node consists of a bunch of system configuration
registers, not only pinctrl, but also phy, and misc registers.
It is difficult to split the node.

To allow to migrate to the new DT structure, this commit adds new
compatible strings to not disturb the existing DT.  After a while,
the old binding will be removed.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is needed to get access to UniPhier System Bus (external bus).
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

These pins do not support pin-muxing, but it is useful to support
pin configuration for them.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

PH1-LD4 and PH1-sLD8 SoCs have pins that support pin configuration
(pin biasing, drive strength control), but not pin-muxing.

Allow to fill the mux value table with -1 for those pins; pins with
mux value -1 will be skipped in the pin-mux set function.  The mux
value type should be changed from "unsigned" to "int" in order to
accommodate -1 as a special case.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>