- 06 5月, 2015 1 次提交
-
-
由 Johannes Berg 提交于
Extend the function to read the TKIP IV32/IV16 to read the IV/PN for all ciphers in order to allow drivers with full hardware crypto to properly support this. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 05 5月, 2015 7 次提交
-
-
由 Johannes Berg 提交于
No current (and planned, as far as I know) wifi devices support encapsulation checksum offload, so remove the useless test here. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
When LED triggers are compiled in, but not used, mac80211 will still call them to update the status. This isn't really a problem for the assoc and radio ones, but the TX/RX (and to a certain extend TPT) ones can be called very frequently (for every packet.) In order to avoid that when they're not used, track their activation and call the corresponding trigger (and in the TPT case, account for throughput) only when the trigger is actually used by an LED. Additionally, make those trigger functions inlines since theyre only used once in the remaining code. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
This is just a code cleanup, make the LED trigger names const as they're not expected to be modified by drivers. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Remove items that can be retrieved through nl80211. This also removes two items (tx_packets and tx_bytes) where only the VO counter was exposed since they are split up per AC but in the debugfs file only the first AC was shown. Also remove the useless "dev" file - the stations have long been in a sub-directory of the netdev so there's no need for that any more. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
This counter is unsafe with concurrent TX and is only exposed through debugfs and ethtool. Instead of trying to fix it just remove it for now, if it's really needed then it should be exposed through nl80211 and in a way that drivers that do the fragmentation in the device could support it as well. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Since these counters can only be read through debugfs, there's very little point in maintaining them all the time. However, even just making them depend on debugfs is pointless - they're not normally used. Additionally a number of them aren't even concurrency safe. Move them under MAC80211_DEBUG_COUNTERS so they're normally not even compiled in. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
The debugfs statistics macros are pointlessly verbose, so change that macro to just have a single argument. While at it, remove the unused counters and rename rx_expand_skb_head2 to the better rx_expand_skb_head_defrag. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 24 4月, 2015 12 次提交
-
-
由 Matti Gottlieb 提交于
Currently while associated to an AP and sending a (public) action frame to a different AP on the same channel, the action frame will be sent like a regular tx frame without going off channel. When power save is enabled this can cause problems, since the device can go into power save and miss the response to the action frame that is sent by the other AP. Force off-channel transmission to avoid this issue in case - HW offchannel is used, - the user didn't forbid transmitting frames off channel - the frame is not sent to the AP that we are associated with (if it is we assume the response would be bufferable) Signed-off-by: NMatti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> [reword commit message a bit] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Emmanuel Grumbach 提交于
When frames time out in the reordering buffer, it is a good indication that something went wrong and the driver may want to know about that to take action or trigger debug flows. It is pointless to notify the driver about each frame that is released. Notify each time the timer fires. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Emmanuel Grumbach 提交于
When we receive a BAR, this typically means that our peer doesn't hear our Block-Acks or that we can't hear its frames. Either way, it is a good indication that the link is in a bad condition. This is why it can serve as a probe to the driver. Use the event_callback callback for this. Since more events with the same data will be added in the feature, the structure that describes the data attached to the event is called in a generic name: ieee80211_ba_event. This also means that from now on, the event_callback can't sleep. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Emmanuel Grumbach 提交于
This will allow mac80211 to forbid sleeping from the event_callback callback. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Chaya Rachel Ivgi 提交于
HT and VHT override configurations were ignored during association and applied only when first beacon recived, or not applied at all. Fix the code to apply HT/VHT overrides during association. This is a bit tricky since the channel was already configured during authentication and we don't want to reconfigure it unless there's really a change. Signed-off-by: NChaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Chun-Yeow Yeoh 提交于
wpa_supplicant or authsae handles the mesh peering in user space, but the plink state is still managed in kernel space. Currently, there is no implementation by wpa_supplicant or authsae to block the plink state after it is set to ESTAB. By applying this patch, we can use the "iw mesh0 station set <MAC address> plink_action block" to block the peer mesh STA. This is useful for experimenting purposes. Signed-off-by: NChun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
This isn't all that relevant for RX right now, but TX can be concurrent due to multi-queue and the accounting is therefore broken. Use the standard per-CPU statistics to avoid this. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
This isn't necessary any more as the stack will automatically update the TXQ's trans_start after calling ndo_start_xmit(). Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
The OCB input path already checked that the BSSID is the broadcast address, so the later check can never fail. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
The function really shouldn't be called prepare_for_handlers(), all it does is check if the frame should be dropped. Rename it to ieee80211_accept_frame() and clean it up a bit. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
With promisc support gone, only AP and P2P-Device type interfaces still clear IEEE80211_RX_RA_MATCH. In both cases this isn't really necessary though, so we can remove that flag and the code. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
This support is essentially useless as typically networks are encrypted, frames will be filtered by hardware, and rate scaling will be done with the intended recipient in mind. For real monitoring of the network, the monitor mode support should be used instead. Removing it removes a lot of corner cases. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 23 4月, 2015 1 次提交
-
-
由 Johannes Berg 提交于
Allow debug builds to configure the station hash table maximum size in order to run with hash collisions in limited scenarios such as hwsim testing. The default remains 0 which effectively means no limit. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 22 4月, 2015 10 次提交
-
-
由 Johannes Berg 提交于
Implement the necessary software segmentation on the normal TX path so that fast-xmit can use segmentation offload if the hardware (or driver) supports it. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
If drivers want to support S/G (really just gather DMA on TX) then we can now easily support this on the fast-xmit path since it just needs to write to the ethernet header (and already has a check for that being possible.) However, disallow this on the regular TX path (which has to handle fragmentation, software crypto, etc.) by calling skb_linearize(). Also allow the related HIGHDMA since that's not interesting to the code in mac80211 at all anyway. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
When we go through the complete TX processing, there are a number of things like fragmentation and software crypto that require the checksum to be calculated already. In favour of maintainability, instead of adding the necessary call to skb_checksum_help() in all the places that need it, just do it once before the regular TX processing. Right now this only affects the TI wlcore and QCA ath10k drivers since they're the only ones using checksum offload. The previous commits enabled fast-xmit for them in almost all cases. For wlcore this even fixes a corner case: when a key fails to be programmed to hardware software encryption gets used, encrypting frames with a bad checksum. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
The driver can clearly enable fast-xmit since it does rate control in the device and thus must do duration calculation there as well. Acked-by: NKalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
The driver can clearly enable fast-xmit since it does rate control in the device and thus must do duration calculation there as well. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
IBSS can be supported very easily since it uses the standard station authorization state etc. so it just needs to be covered by the header building switch statement. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
When crypto is offloaded then in some cases it's all handled by the device, and in others only some space for the IV must be reserved in the frame. Handle both of these cases in the fast-xmit path, up to a limit of 18 bytes of space for IVs. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
If the driver handles fragmentation then it wouldn't be done in software so we can still use the fast-xmit path in that case. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
For hwsim, the duration field in frames is already not valid for the common case of HT/VHT MCSes, so there's little point in trying to keep it accurate for the legacy rates. Enable the fast-xmit code to allow testing that, although given the dependency on hardware crypto it will only be enabled in open network configurations. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
In order to speed up mac80211's TX path, add the "fast-xmit" cache that will cache the data frame 802.11 header and other data to be able to build the frame more quickly. This cache is rebuilt when external triggers imply changes, but a lot of the checks done per packet today are simplified away to the check for the cache. There's also a more detailed description in the code. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 20 4月, 2015 3 次提交
-
-
由 Jonathan Corbet 提交于
A couple of enums in mac80211.h became structures recently, but the comments didn't follow suit, leading to errors like: Error(.//include/net/mac80211.h:367): Cannot parse enum! Documentation/DocBook/Makefile:93: recipe for target 'Documentation/DocBook/80211.xml' failed make[1]: *** [Documentation/DocBook/80211.xml] Error 1 Makefile:1361: recipe for target 'mandocs' failed make: *** [mandocs] Error 2 Fix the comments comments accordingly. Added a couple of other small comment fixes while I was there to silence other recently-added docbook warnings. Reported-by: NJim Davis <jim.epost@gmail.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Both minstrel (reported by Sven Eckelmann) and the iwlwifi rate control aren't properly taking concurrency into account. It's likely that the same is true for other rate control algorithms. In the case of minstrel this manifests itself in crashes when an update and other data access are run concurrently, for example when the stations change bandwidth or similar. In iwlwifi, this can cause firmware crashes. Since fixing all rate control algorithms will be very difficult, just provide locking for invocations. This protects the internal data structures the algorithms maintain. I've manipulated hostapd to test this, by having it change its advertised bandwidth roughly ever 150ms. At the same time, I'm running a flood ping between the client and the AP, which causes this race of update vs. get_rate/status to easily happen on the client. With this change, the system survives this test. Reported-by: NSven Eckelmann <sven@open-mesh.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Bob Copeland 提交于
The mesh plink code uses sta->lock to serialize access to the plink state fields between the peer link state machine and the peer link timer. Some paths (e.g. those involving mps_qos_null_tx()) unfortunately hold this spinlock across frame tx, which is soon to be disallowed. Add a new spinlock just for plink access. Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 18 4月, 2015 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix verifier memory corruption and other bugs in BPF layer, from Alexei Starovoitov. 2) Add a conservative fix for doing BPF properly in the BPF classifier of the packet scheduler on ingress. Also from Alexei. 3) The SKB scrubber should not clear out the packet MARK and security label, from Herbert Xu. 4) Fix oops on rmmod in stmmac driver, from Bryan O'Donoghue. 5) Pause handling is not correct in the stmmac driver because it doesn't take into consideration the RX and TX fifo sizes. From Vince Bridgers. 6) Failure path missing unlock in FOU driver, from Wang Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) net: dsa: use DEVICE_ATTR_RW to declare temp1_max netns: remove BUG_ONs from net_generic() IB/ipoib: Fix ndo_get_iflink sfc: Fix memcpy() with const destination compiler warning. altera tse: Fix network-delays and -retransmissions after high throughput. net: remove unused 'dev' argument from netif_needs_gso() act_mirred: Fix bogus header when redirecting from VLAN inet_diag: fix access to tcp cc information tcp: tcp_get_info() should fetch socket fields once net: dsa: mv88e6xxx: Add missing initialization in mv88e6xxx_set_port_state() skbuff: Do not scrub skb mark within the same name space Revert "net: Reset secmark when scrubbing packet" bpf: fix two bugs in verification logic when accessing 'ctx' pointer bpf: fix bpf helpers to use skb->mac_header relative offsets stmmac: Configure Flow Control to work correctly based on rxfifo size stmmac: Enable unicast pause frame detect in GMAC Register 6 stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree stmmac: Add defines and documentation for enabling flow control stmmac: Add properties for transmit and receive fifo sizes stmmac: fix oops on rmmod after assigning ip addr ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc updates from David Miller: "The PowerPC folks have a really nice scalable IOMMU pool allocator that we wanted to make use of for sparc. So here we have a series that abstracts out their code into a common layer that anyone can make use of. Sparc is converted, and the PowerPC folks have reviewed and ACK'd this series and plan to convert PowerPC over as well" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: iommu-common: Fix PARISC compile-time warnings sparc: Make LDC use common iommu poll management functions sparc: Make sparc64 use scalable lib/iommu-common.c functions sparc: Break up monolithic iommu table/lock into finer graularity pools and lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull arch/tile updates from Chris Metcalf: "These are mostly nohz_full changes, plus a smattering of minor fixes (notably a couple for ftrace)" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: nohz: warn if nohz_full uses hypervisor shared cores tile: ftrace: fix function_graph tracer issues tile: map data region shadow of kernel as R/W tile: support CONTEXT_TRACKING and thus NOHZ_FULL tile: support arch_irq_work_raise arch: tile: fix null pointer dereference on pt_regs pointer tile/elf: reorganize notify_exec() tile: use si_int instead of si_ptr for compat_siginfo
-
由 Vivien Didelot 提交于
Since commit da4759c7 (sysfs: Use only return value from is_visible for the file mode), it is possible to reduce the permissions of a file. So declare temp1_max with the DEVICE_ATTR_RW macro and remove the write permission in dsa_hwmon_attrs_visible if set_temp_limit isn't provided. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for Linux 4.1. Most noteworthy: - Add more Octeon-optimized crypto functions - Octeon crypto preemption and locking fixes - Little endian support for Octeon - Use correct CSR to soft reset Octeons - Support LEDs on the Octeon-based DSR-1000N - Fix PCI interrupt mapping for the Octeon-based DSR-1000N - Mark prom_free_prom_memory() as __init for a number of systems - Support for Imagination's Pistachio SOC. This includes arch and CLK bits. I'd like to merge pinctrl bits later - Improve parallelism of csum_partial for certain pipelines - Organize DTB files in subdirs like other architectures - Implement read_sched_clock for all MIPS platforms other than Octeon - Massive series of 38 fixes and cleanups for the FPU emulator / kernel - Further FPU remulator work to support new features. This sits on a separate branch which also has been pulled into the 4.1 KVM branch - Clean up and fixes for the SEAD3 eval board; remove unused file - Various updates for Netlogic platforms - A number of small updates for Loongson 3 platforms - Increase the memory limit for ATH79 platforms to 256MB - A fair number of fixes and updates for BCM47xx platforms - Finish the implementation of XPA support - MIPS FDC support. No, not floppy controller but Fast Debug Channel :) - Detect the R16000 used in SGI legacy platforms - Fix Kconfig dependencies for the SSB bus support" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits) MIPS: Makefile: Fix MIPS ASE detection code MIPS: asm: elf: Set O32 default FPU flags MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G MIPS: Kconfig: Disable SMP/CPS for 64-bit MIPS: Hibernate: flush TLB entries earlier MIPS: smp-cps: cpu_set FPU mask if FPU present MIPS: lose_fpu(): Disable FPU when MSA enabled MIPS: ralink: add missing symbol for RALINK_ILL_ACC MIPS: ralink: Fix bad config symbol in PCI makefile. SSB: fix Kconfig dependencies MIPS: Malta: Detect and fix bad memsize values Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores." MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard. MIPS: Fix cpu_has_mips_r2_exec_hazard. MIPS: kernel: entry.S: Set correct ISA level for mips_ihb MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter MIPS: unaligned: Fix regular load/store instruction emulation for EVA MIPS: unaligned: Surround load/store macros in do {} while statements ...
-
git://github.com/czankel/xtensa-linux由 Linus Torvalds 提交于
Pull Xtensa updates from Chris Zankel: - fix linker script transformation for .text / .text.fixup - wire bpf and execveat syscalls - provide __NR_sync_file_range2 instead of __NR_sync_file_range, as that's what xtensa uses. - make xtfpgs LCD driver functional and configurable. This fixes hardware lockup on KC705/ML605 boot - add audio subsystem bits to xtfpga DTS and provide sample KC705 config with audio features enabled - add CY7C67300 USB controller support to XTFPGA - fix locking issues in ISS network driver - document PIC and MX interrupt distributor device tree bindings * tag 'xtensa-20150416' of git://github.com/czankel/xtensa-linux: xtensa: xtfpga: add CY7C67300 USB controller support irqchip: xtensa-pic: xtensa-mx: document DT bindings xtensa: ISS: fix locking in TAP network adapter xtensa: Fix fix linker script transformation for .text / .text.fixup xtensa: provide __NR_sync_file_range2 instead of __NR_sync_file_range xtensa: wire bpf and execveat syscalls xtensa: xtfpga: fix hardware lockup caused by LCD driver xtensa: xtfpga: provide defconfig with audio subsystem xtensa: xtfpga: add audio card to xtfpga DTS
-