- 03 3月, 2016 5 次提交
-
-
由 Xiao Guangrong 提交于
kvm_lpage_info->write_count is used to detect if the large page mapping for the gfn on the specified level is allowed, rename it to disallow_lpage to reflect its purpose, also we rename has_wrprotected_page() to mmu_gfn_lpage_is_disallowed() to make the code more clearer Later we will extend this mechanism for page tracking: if the gfn is tracked then large mapping for that gfn on any level is not allowed. The new name is more straightforward Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Joerg Roedel 提交于
Using the vector stored at interrupt delivery makes the eoi matching safe agains irq migration in the ioapic. Signed-off-by: NJoerg Roedel <jroedel@suse.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Joerg Roedel 提交于
This allows backtracking later in case the rtc irq has been moved to another vcpu/vector. Signed-off-by: NJoerg Roedel <jroedel@suse.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Joerg Roedel 提交于
Currently this is a bitmap which tracks which CPUs we expect an EOI from. Move this bitmap to a struct so that we can track additional information there. Signed-off-by: NJoerg Roedel <jroedel@suse.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Merge branch 'kvm-ppc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD The highlights are: * Enable VFIO device on PowerPC, from David Gibson * Optimizations to speed up IPIs between vcpus in HV KVM, from Suresh Warrier (who is also Suresh E. Warrier) * In-kernel handling of IOMMU hypercalls, and support for dynamic DMA windows (DDW), from Alexey Kardashevskiy. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 02 3月, 2016 4 次提交
-
-
由 Alexey Kardashevskiy 提交于
The existing KVM_CREATE_SPAPR_TCE only supports 32bit windows which is not enough for directly mapped windows as the guest can get more than 4GB. This adds KVM_CREATE_SPAPR_TCE_64 ioctl and advertises it via KVM_CAP_SPAPR_TCE_64 capability. The table size is checked against the locked memory limit. Since 64bit windows are to support Dynamic DMA windows (DDW), let's add @bus_offset and @page_shift which are also required by DDW. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Alexey Kardashevskiy 提交于
This enables userspace view of TCE tables to start from non-zero offset on a bus. This will be used for huge DMA windows. This only changes the internal structure, the user interface needs to change in order to use an offset. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Alexey Kardashevskiy 提交于
At the moment the kvmppc_spapr_tce_table struct can only describe 4GB windows and handle fixed size (4K) pages. Dynamic DMA windows support more so these limits need to be extended. This replaces window_size (in bytes, 4GB max) with page_shift (32bit) and size (64bit, in pages). This should cause no behavioural change as this is changing the internal structures only - the user interface still only allows one to create a 32-bit table with 4KiB pages at this stage. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Alexey Kardashevskiy 提交于
This adds a capability number for 64-bit TCE tables support. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 29 2月, 2016 9 次提交
-
-
由 Suresh E. Warrier 提交于
Redirecting the wakeup of a VCPU from the H_IPI hypercall to a core running in the host is usually a good idea, most workloads seemed to benefit. However, in one heavily interrupt-driven SMT1 workload, some regression was observed. This patch adds a kvm_hv module parameter called h_ipi_redirect to control this feature. The default value for this tunable is 1 - that is enable the feature. Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Suresh E. Warrier 提交于
This patch adds support to real-mode KVM to search for a core running in the host partition and send it an IPI message with VCPU to be woken. This avoids having to switch to the host partition to complete an H_IPI hypercall when the VCPU which is the target of the the H_IPI is not loaded (is not running in the guest). The patch also includes the support in the IPI handler running in the host to do the wakeup by calling kvmppc_xics_ipi_action for the PPC_MSG_RM_HOST_ACTION message. When a guest is being destroyed, we need to ensure that there are no pending IPIs waiting to wake up a VCPU before we free the VCPUs of the guest. This is accomplished by: - Forces a PPC_MSG_CALL_FUNCTION IPI to be completed by all CPUs before freeing any VCPUs in kvm_arch_destroy_vm(). - Any PPC_MSG_RM_HOST_ACTION messages must be executed first before any other PPC_MSG_CALL_FUNCTION messages. Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Suresh Warrier 提交于
This patch adds the support for the kick VCPU operation for kvmppc_host_rm_ops. The kvmppc_xics_ipi_action() function provides the function to be invoked for a host side operation when poked by the real mode KVM. This is initiated by KVM by sending an IPI to any free host core. KVM real mode must set the rm_action to XICS_RM_KICK_VCPU and rm_data to point to the VCPU to be woken up before sending the IPI. Note that we have allocated one kvmppc_host_rm_core structure per core. The above values need to be set in the structure corresponding to the core to which the IPI will be sent. Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Suresh Warrier 提交于
The kvmppc_host_rm_ops structure keeps track of which cores are are in the host by maintaining a bitmask of active/runnable online CPUs that have not entered the guest. This patch adds support to manage the bitmask when a CPU is offlined or onlined in the host. Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Suresh Warrier 提交于
Update the core host state in kvmppc_host_rm_ops whenever the primary thread of the core enters the guest or returns back. Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Suresh Warrier 提交于
This patch defines the data structures to support the setting up of host side operations while running in real mode in the guest, and also the functions to allocate and free it. The operations are for now limited to virtual XICS operations. Currently, we have only defined one operation in the data structure: - Wake up a VCPU sleeping in the host when it receives a virtual interrupt The operations are assigned at the core level because PowerKVM requires that the host run in SMT off mode. For each core, we will need to manage its state atomically - where the state is defined by: 1. Is the core running in the host? 2. Is there a Real Mode (RM) operation pending on the host? Currently, core state is only managed at the whole-core level even when the system is in split-core mode. This just limits the number of free or "available" cores in the host to perform any host-side operations. The kvmppc_host_rm_core.rm_data allows any data to be passed by KVM in real mode to the host core along with the operation to be performed. The kvmppc_host_rm_ops structure is allocated the very first time a guest VM is started. Initial core state is also set - all online cores are in the host. This structure is never deleted, not even when there are no active guests. However, it needs to be freed when the module is unloaded because the kvmppc_host_rm_ops_hv can contain function pointers to kvm-hv.ko functions for the different supported host operations. Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Suresh Warrier 提交于
Function to cause an IPI by directly updating the MFFR register in the XICS. The function is meant for real-mode callers since they cannot use the smp_ops->cause_ipi function which uses an ioremapped address. Normal usage is for the the KVM real mode code to set the IPI message using smp_muxed_ipi_message_pass and then invoke icp_native_cause_ipi_rm to cause the actual IPI. The function requires kvm_hstate.xics_phys to have been initialized with the physical address of XICS. Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Suresh Warrier 提交于
smp_muxed_ipi_message_pass() invokes smp_ops->cause_ipi, which uses an ioremapped address to access registers on the XICS interrupt controller to cause the IPI. Because of this real mode callers cannot call smp_muxed_ipi_message_pass() for IPI messaging. This patch creates a separate function smp_muxed_ipi_set_message just to set the IPI message without the cause_ipi routine. After calling this function to set the IPI message, real mode callers must cause the IPI by writing to the XICS registers directly. As part of this, we also change smp_muxed_ipi_message_pass to call smp_muxed_ipi_set_message to set the message instead of doing it directly inside the routine. Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Suresh Warrier 提交于
This patch increases the number of demuxed messages for a controller with a single ipi to 8 for 64-bit systems. This is required because we want to use the IPI mechanism to send messages from a CPU running in KVM real mode in a guest to a CPU in the host to take some action. Currently, we only support 4 messages and all 4 are already taken. Define a fifth message PPC_MSG_RM_HOST_ACTION for this purpose. Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 23 2月, 2016 6 次提交
-
-
由 Geliang Tang 提交于
To make the intention clearer, use list_first_entry instead of list_entry. Signed-off-by: NGeliang Tang <geliangtang@163.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Geliang Tang 提交于
To make the intention clearer, use list_last_entry instead of list_entry. Signed-off-by: NGeliang Tang <geliangtang@163.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Geliang Tang 提交于
Use list_for_each_entry*() instead of list_for_each*() to simplify the code. Signed-off-by: NGeliang Tang <geliangtang@163.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Geliang Tang 提交于
Use list_for_each_entry_safe() instead of list_for_each_safe() to simplify the code. Signed-off-by: NGeliang Tang <geliangtang@163.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Takuya Yoshikawa 提交于
Rather than placing a handle_mmio_page_fault() call in each vcpu->arch.mmu.page_fault() handler, moving it up to kvm_mmu_page_fault() makes the code better: - avoids code duplication - for kvm_arch_async_page_ready(), which is the other caller of vcpu->arch.mmu.page_fault(), removes an extra error_code check - avoids returning both RET_MMIO_PF_* values and raw integer values from vcpu->arch.mmu.page_fault() Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Takuya Yoshikawa 提交于
These two have only slight differences: - whether 'addr' is of type u64 or of type gva_t - whether they have 'direct' parameter or not Concerning the former, quickly_check_mmio_pf()'s u64 is better because 'addr' needs to be able to have both a guest physical address and a guest virtual address. The latter is just a stylistic issue as we can always calculate the mode from the 'vcpu' as is_mmio_page_fault() does. This patch keeps the parameter to make the following patch cleaner. In addition, the patch renames the function to mmio_info_in_cache() to make it clear what it actually checks for. Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 17 2月, 2016 14 次提交
-
-
由 Paolo Bonzini 提交于
Prepare for improving the precision in the next patch. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
The patch implements KVM_EXIT_HYPERV userspace exit functionality for Hyper-V VMBus hypercalls: HV_X64_HCALL_POST_MESSAGE, HV_X64_HCALL_SIGNAL_EVENT. Changes v3: * use vcpu->arch.complete_userspace_io to setup hypercall result Changes v2: * use KVM_EXIT_HYPERV for hypercalls Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Joerg Roedel <joro@8bytes.org> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
Currently we do not support Hyper-V hypercall continuation so reject it. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Joerg Roedel <joro@8bytes.org> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
Pass the return code from kvm_emulate_hypercall on to the caller, in order to allow it to indicate to the userspace that the hypercall has to be handled there. Also adjust all the existing code paths to return 1 to make sure the hypercall isn't passed to the userspace without setting kvm_run appropriately. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Joerg Roedel <joro@8bytes.org> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
VMBus hypercall codes inside Hyper-V UAPI header will be used by QEMU to implement VMBus host devices support. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Acked-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Joerg Roedel <joro@8bytes.org> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org [Do not rename the constant at the same time as moving it, as that would cause semantic conflicts with the Hyper-V tree. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
Rename HV_X64_HV_NOTIFY_LONG_SPIN_WAIT by HVCALL_NOTIFY_LONG_SPIN_WAIT, so the name is more consistent with the other hypercalls. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Joerg Roedel <joro@8bytes.org> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org [Change name, Andrey used HV_X64_HCALL_NOTIFY_LONG_SPIN_WAIT. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Sometimes when setting a breakpoint a process doesn't stop on it. This is because the debug registers are not loaded correctly on VCPU load. The following simple reproducer from Oleg Nesterov tries using debug registers in both the host and the guest, for example by running "./bp 0 1" on the host and "./bp 14 15" under QEMU. #include <unistd.h> #include <signal.h> #include <stdlib.h> #include <stdio.h> #include <sys/wait.h> #include <sys/ptrace.h> #include <sys/user.h> #include <asm/debugreg.h> #include <assert.h> #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) unsigned long encode_dr7(int drnum, int enable, unsigned int type, unsigned int len) { unsigned long dr7; dr7 = ((len | type) & 0xf) << (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE); if (enable) dr7 |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE)); return dr7; } int write_dr(int pid, int dr, unsigned long val) { return ptrace(PTRACE_POKEUSER, pid, offsetof (struct user, u_debugreg[dr]), val); } void set_bp(pid_t pid, void *addr) { unsigned long dr7; assert(write_dr(pid, 0, (long)addr) == 0); dr7 = encode_dr7(0, 1, DR_RW_EXECUTE, DR_LEN_1); assert(write_dr(pid, 7, dr7) == 0); } void *get_rip(int pid) { return (void*)ptrace(PTRACE_PEEKUSER, pid, offsetof(struct user, regs.rip), 0); } void test(int nr) { void *bp_addr = &&label + nr, *bp_hit; int pid; printf("test bp %d\n", nr); assert(nr < 16); // see 16 asm nops below pid = fork(); if (!pid) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); kill(getpid(), SIGSTOP); for (;;) { label: asm ( "nop; nop; nop; nop;" "nop; nop; nop; nop;" "nop; nop; nop; nop;" "nop; nop; nop; nop;" ); } } assert(pid == wait(NULL)); set_bp(pid, bp_addr); for (;;) { assert(ptrace(PTRACE_CONT, pid, 0, 0) == 0); assert(pid == wait(NULL)); bp_hit = get_rip(pid); if (bp_hit != bp_addr) fprintf(stderr, "ERR!! hit wrong bp %ld != %d\n", bp_hit - &&label, nr); } } int main(int argc, const char *argv[]) { while (--argc) { int nr = atoi(*++argv); if (!fork()) test(nr); } while (wait(NULL) > 0) ; return 0; } Cc: stable@vger.kernel.org Suggested-by: NNadadv Amit <namit@cs.technion.ac.il> Reported-by: NAndrey Wagin <avagin@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Radim Krčmář 提交于
Smatch noticed a NULL dereference in kvm_intr_is_single_vcpu_fast that happens if VM already warned about invalid lowest-priority interrupt. Create a function for common code while fixing it. Fixes: 6228a0da ("KVM: x86: Add lowest-priority support for vt-d posted-interrupts") Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This is the same as before: kvm_scale_tsc(tgt_tsc_khz) = tgt_tsc_khz * ratio = tgt_tsc_khz * user_tsc_khz / tsc_khz (see set_tsc_khz) = user_tsc_khz (see kvm_guest_time_update) = vcpu->arch.virtual_tsc_khz (see kvm_set_tsc_khz) However, computing it through kvm_scale_tsc will make it possible to include the NTP correction in tgt_tsc_khz. Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This refers to the desired (scaled) frequency, which is called user_tsc_khz in the rest of the file. Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Jan Kiszka 提交于
When we take a #DB or #BP vmexit while in guest mode, we first of all need to check if there is ongoing guest debugging that might be interested in the event. Currently, we unconditionally leave L2 and inject the event into L1 if it is intercepting the exceptions. That breaks things marvelously. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Jan Kiszka 提交于
There is quite some common code in all these is_<exception>() helpers. Factor it out before adding even more of them. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Christian Borntraeger 提交于
Right now halt_poll_ns can be change during runtime. The grow and shrink factors can only be set during module load. Lets fix several aspects of grow shrink: - make grow/shrink changeable by root - make all variables unsigned int - read the variables once to prevent races Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Merge tag 'kvm-s390-next-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes and features for kvm/next (4.6) 1. also provide the floating point registers via sync regs 2. Separate out intruction vs. data accesses 3. Fix program interrupts in some cases 4. Documentation fixes 5. dirty log improvements for huge guests
-
- 16 2月, 2016 2 次提交
-
-
由 Alexey Kardashevskiy 提交于
This adds real and virtual mode handlers for the H_PUT_TCE_INDIRECT and H_STUFF_TCE hypercalls for user space emulated devices such as IBMVIO devices or emulated PCI. These calls allow adding multiple entries (up to 512) into the TCE table in one call which saves time on transition between kernel and user space. The current implementation of kvmppc_h_stuff_tce() allows it to be executed in both real and virtual modes so there is one helper. The kvmppc_rm_h_put_tce_indirect() needs to translate the guest address to the host address and since the translation is different, there are 2 helpers - one for each mode. This implements the KVM_CAP_PPC_MULTITCE capability. When present, the kernel will try handling H_PUT_TCE_INDIRECT and H_STUFF_TCE if these are enabled by the userspace via KVM_CAP_PPC_ENABLE_HCALL. If they can not be handled by the kernel, they are passed on to the user space. The user space still has to have an implementation for these. Both HV and PR-syle KVM are supported. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Alexey Kardashevskiy 提交于
Upcoming multi-tce support (H_PUT_TCE_INDIRECT/H_STUFF_TCE hypercalls) will validate TCE (not to have unexpected bits) and IO address (to be within the DMA window boundaries). This introduces helpers to validate TCE and IO address. The helpers are exported as they compile into vmlinux (to work in realmode) and will be used later by KVM kernel module in virtual mode. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-