- 20 10月, 2007 31 次提交
-
-
由 Mike Travis 提交于
cpu_data is currently an array defined using NR_CPUS. This means that we overallocate since we will rarely really use maximum configured cpus. When NR_CPU count is raised to 4096 the size of cpu_data becomes 3,145,728 bytes. These changes were adopted from the sparc64 (and ia64) code. An additional field was added to cpuinfo_x86 to be a non-ambiguous cpu index. This corresponds to the index into a cpumask_t as well as the per_cpu index. It's used in various places like show_cpuinfo(). cpu_data is defined to be the boot_cpu_data structure for the NON-SMP case. Signed-off-by: NMike Travis <travis@sgi.com> Acked-by: NChristoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jan Blunck 提交于
This patch defines frame_pointer() and stack_pointer() similar to the already defined instruction_pointer(). Thus the oprofile code can be written in a more readable fashion. [ tglx: arch/x86 adaptation ] Signed-off-by: NJan Blunck <jblunck@suse.de> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Stephane Eranian 提交于
Here is a small patch to change the behavior of the PMU msr allocator to avoid BUG_ON() when the MSR is unknwon. Instead, it now returns ok, which means "I do not manage". The current allocator is not yet managing the full set of PMU registers (e.g., GLOBAL_* on Core 2). [watchdog] do not BUG_ON() in the MSR allocator if MSR is unknown, return ok instead Signed-off-by: NStephane Eranian <eranian@hpl.hp.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Mike Travis 提交于
This is from an earlier message from Christoph Lameter: processor_core.c currently tries to determine the apicid by special casing for IA64 and x86. The desired information is readily available via cpu_physical_id() on IA64, i386 and x86_64. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Additionally, boot_cpu_id needed to be exported to fix compile errors in dma code when !CONFIG_SMP. Signed-off-by: NMike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Mike Travis 提交于
Convert cpu_llc_id from a static array sized by NR_CPUS to a per_cpu variable. This saves sizeof(cpu_llc_id) * NR unused cpus. Access is mostly from startup and CPU HOTPLUG functions. Note there's an additional change of the type of cpu_llc_id from int to u8 for ARCH i386 to correspond with the same type in ARCH x86_64. Signed-off-by: NMike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Mike Travis 提交于
This patch converts the x86_cpu_to_apicid array to be a per cpu variable. This saves sizeof(apicid) * NR unused cpus. Access is mostly from startup and CPU HOTPLUG functions. MP_processor_info() is one of the functions that require access to the x86_cpu_to_apicid array before the per_cpu data area is setup. For this case, a pointer to the __initdata array is initialized in setup_arch() and removed in smp_prepare_cpus() after the per_cpu data area is initialized. A second change is included to change the initial array value of ARCH i386 from 0xff to BAD_APICID to be consistent with ARCH x86_64. Signed-off-by: NMike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Rusty Russell 提交于
This simplifies the io_apic.c __assign_irq_vector() logic and removes the explicit SYSCALL_VECTOR check, and also allows for vectors to be reserved by other mechanisms (ie. lguest). [ tglx: arch/x86 adaptation ] Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andi Kleen 提交于
Don't want any lockdep or other fragile machinery to run during oopses. Use raw spinlocks directly for oops locking. Also disables irq flag tracing there. [ tglx: arch/x86 adaptation ] Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jan Beulich 提交于
[ tglx: arch/x86 adaptation ] Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Akinobu Mita 提交于
Do cpuid_device_create() in CPU_UP_PREPARE instead of CPU_ONLINE. [ tglx: arch/x86 adaptation ] Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Laurent Vivier 提交于
This patch defines the missing function smp_call_function_mask() for x86_64, this is more or less a cut&paste of i386 function. It removes also some duplicate code. This function is needed by KVM to execute a function on some CPUs. AK: Fixed description AK: Moved WARN_ON(irqs_disabled) one level up to not warn in the panic case. [ tglx: arch/x86 adaptation ] Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
This patch provides a new set of functions for managing the descriptor tables that can be used instead of putting the raw assembly in .c files. Remodeling of store_tr() suggested by Frederik Deweerdt. [ tglx: arch/x86 adaptation ] Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Pavel Emelyanov 提交于
Both functions printk the same information, except for CRx and debug registers in the show_registers() one and a bit different manner. So move the common code into one place. This is already done for x86_64, so I think it's worth having the same on i386. This saves 100 bytes of .rodata section :) ... but only 8 from .text :( [ tglx: arch/x86 adaptation ] Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jan Blunck 提交于
This patch improves oprofile callgraphs for i386/x86_64. The old backtracing code was unable to produce kernel backtraces if the kernel wasn't compiled with framepointers. The code now uses dump_trace(). [ tglx: arch/x86 adaptation ] Signed-off-by: NJan Blunck <jblunck@suse.de> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andi Kleen 提交于
[ tglx: arch/x86 adaptation ] Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andi Kleen 提交于
They were already very similar; just use the same file now. [ tglx: arch/x86 adaptation ] Cc: lenb@kernel.org Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Udo A. Steinberg 提交于
ICH3 and ICH4 have undocumented HPET capabilities. This patch enables HPET for platforms based around these ICHs. Tested on various ICH3 and ICH4 platforms. Because HPET is not officially documented for ICH3/4 and may not have been validated by chipset folks, we're on thin ice here. I'd recommend testing this patch in -hrt or -mm for a while and wait for success/failure reports before feeding it upstream. tglx: depends on the force_hpet command line option ! Signed-off-by: NUdo A. Steinberg <us15@os.inf.tu-dresden.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Udo A. Steinberg 提交于
This patch adds quirks to force enable HPET on Via VT8235 and VT8237 chipsets. The datasheet for 8237 documents HPET functionality (although wrongly) whereas HPET is undocumented for 8235. Tested on A7V880 (8237) and K7VT4A+ (8235) boards. tglx: depends on the force_hept commandline option Signed-off-by: NUdo A. Steinberg <us15@os.inf.tu-dresden.de> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
add force_hpet boot option. (this will be useful to make the forced-enable quirks depend on.) Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andi Kleen 提交于
don't zero pad addresses in segfault message. Matches the other trap messages. This leaves some more space for the new file name. [ mingo: arch/x86 adaptation ] Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Roland McGrath 提交于
This makes x86-64's ia32 code use the new linux/elfcore-compat.h, reducing some hand-copied duplication. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Hiroshi Shimamoto 提交于
Merge init_task_32/64.c. Move 64bit per cpu data orig_ist to setup64.c. [ mingo: fixed checkpatch trivialities. ] Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andi Kleen 提交于
Old debugging code that is not really needed anymore. If someone wants it it would be better replaced with a systemtap script or kprobe. This avoids a potential cache miss during page fault processing. [ mingo: arch/x86 adaptation ] Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Adrian Knoth 提交于
The helptext for IA32_EMULATION in arch/x86_64/Kconfig is wider than 80 chars, thus failing to be displayed in 80x24 screens. This patch re-breaks lines. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
-
由 Thomas Gleixner 提交于
Move the 64bit Kconfig file to arch/x86/kernel/cpu/cpufreq, so we can unify them. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andres Salomon 提交于
Simple cosmetic update for the cs5536 reboot fixup; define the MSR that's used for rebooting in geode.h, and use the define. Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
x86 NUMA kernels crash in the scheduler setup code if "nosmp" or "maxcpus=0" is passed on the boot command line: | Brought up 1 CPUs | BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 | printing eip: c011f0b5 *pde = 00000000 | Oops: 0000 [#1] SMP | | Pid: 1, comm: swapper Not tainted (2.6.23 #67) | EIP: 0060:[<c011f0b5>] EFLAGS: 00010246 CPU: 0 | EIP is at sd_degenerate+0x35/0x40 the reason is sloppy spaghetti code in smpboot_32.c that resulted in a missing map_cpu_to_logical_apicid() call - which also had the side-effect of setting up the cpu_2_node[] entry for the lone CPU. That resulted in node_to_cpumask(0) resulting in 00000000 - confusing the sched-domains setup code. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Sam Ravnborg 提交于
Use relative symlinks so we can refer bzImage from different tree structures aka via NFS. Moved the creation of directory + symlink after a successful build of the boot parts. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Siddha, Suresh B 提交于
Appended patch fixes an oops while changing the vsyscall sysctl. I am sure no one tested this code before integrating into mainline :( BTW, using ioremap() in vsyscall_sysctl_change() to get the virtual address of a kernel symbol sounds like an over kill.. I wonder if we can define a simple __va_vsymbol() which will return directly the kernel direct mapping. comments in the code which says gcc has trouble with __va(__pa()) sounds bogus to me. __pa() on a vsyscall address will not work anyhow :( And also, the whole nop out syscall in vsyscall page infrastructure (vsyscall_sysctl_change()) is added to make some attacks difficult, and yet I don't see this nop out being done by default. This area requires more cleanups? Fix an oops with __pa_vsymbol(). VSYSCALL_FIRST_PAGE is a fixmap index. We want the starting virtual address of the vsyscall page and not the index. [ mingo: arch/x86 adaptation ] Reported-by: NYanmin Zhang <yanmin.zhang@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
vdso / vsycall create .so.dbg files now. Add *.so.dbg to the main .ignore file Exclude the compile time created boot directory in arch/x86_64 as well Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 19 10月, 2007 9 次提交
-
-
由 Ingo Molnar 提交于
While we were reviewing pageattr_32/64.c for unification, Thomas Gleixner noticed the following serious SMP bug in global_flush_tlb(): down_read(&init_mm.mmap_sem); list_replace_init(&deferred_pages, &l); up_read(&init_mm.mmap_sem); this is SMP-unsafe because list_replace_init() done on two CPUs in parallel can corrupt the list. This bug has been introduced about a year ago in the 64-bit tree: commit ea7322de Author: Andi Kleen <ak@suse.de> Date: Thu Dec 7 02:14:05 2006 +0100 [PATCH] x86-64: Speed and clean up cache flushing in change_page_attr down_read(&init_mm.mmap_sem); - dpage = xchg(&deferred_pages, NULL); + list_replace_init(&deferred_pages, &l); up_read(&init_mm.mmap_sem); the xchg() based version was SMP-safe, but list_replace_init() is not. So this "cleanup" introduced a nasty bug. why this bug never become prominent is a mystery - it can probably be explained with the (still) relative obscurity of the x86_64 architecture. the safe fix for now is to write-lock init_mm.mmap_sem. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ralf Baechle 提交于
To be consistent with the use of attributes in the rest of the kernel replace all use of __attribute_pure__ with __pure and delete the definition of __attribute_pure__. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Hemminger 提交于
Get rid of sparse related warnings from places that use integer as NULL pointer. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Ian Kent <raven@themaw.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Satyam Sharma 提交于
msr_class_cpu_callback() can be marked __cpuinit, being the notifier callback for a __cpuinitdata notifier_block. So can be marked msr_device_create() too, called only from the newly-__cpuinit msr_class_cpu_callback() or from __init-marked msr_init(). Signed-off-by: NSatyam Sharma <satyam@infradead.org> Cc: Andi Kleen <ak@suse.de> Acked-by: NH. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Neuling 提交于
This adds POWERPC specific hooks for scaled time accounting. POWER6 includes a SPURR register. The SPURR is based off the PURR register but is scaled based on CPU frequency and issue rates. This gives a more accurate account of the instructions used per task. The PURR and timebase will be constant relative to the wall clock, irrespective of the CPU frequency. This implementation reads the SPURR register in account_system_vtime which is only call called on context witch and hard and soft irq entry and exit. The percentage of user and system time is then estimated using the ratio of these accounted by the PURR. If the SPURR is not present, the PURR read. An earlier implementation of this patch read the SPURR whenever the PURR was read, which included the system call entry and exit path. Unfortunately this showed a performance regression on lmbench runs, so was re-implemented. I've included the lmbench results here when run bare metal on POWER6. 1st column is the unpatch results. 2nd column is the results using the below patch and the 3rd is the % diff of these results from the base. 4th and 5th columns are the results and % differnce from the base using the older patch (SPURR read in syscall entry/exit path). Base Scaled-Acct SPURR-in-syscall Result Result % diff Result % diff Simple syscall: 0.3086 0.3086 0.0000 0.3452 11.8600 Simple read: 0.4591 0.4671 1.7425 0.5044 9.86713 Simple write: 0.4364 0.4366 0.0458 0.4731 8.40971 Simple stat: 2.0055 2.0295 1.1967 2.0669 3.06158 Simple fstat: 0.5962 0.5876 -1.442 0.6368 6.80979 Simple open/close: 3.1283 3.1009 -0.875 3.2088 2.57328 Select on 10 fd's: 0.8554 0.8457 -1.133 0.8667 1.32101 Select on 100 fd's: 3.5292 3.6329 2.9383 3.6664 3.88756 Select on 250 fd's: 7.9097 8.1881 3.5197 8.2242 3.97613 Select on 500 fd's: 15.2659 15.836 3.7357 15.873 3.97814 Select on 10 tcp fd's: 0.9576 0.9416 -1.670 0.9752 1.83792 Select on 100 tcp fd's: 7.248 7.2254 -0.311 7.2685 0.28283 Select on 250 tcp fd's: 17.7742 17.707 -0.375 17.749 -0.1406 Select on 500 tcp fd's: 35.4258 35.25 -0.496 35.286 -0.3929 Signal handler installation: 0.6131 0.6075 -0.913 0.647 5.52927 Signal handler overhead: 2.0919 2.1078 0.7600 2.1831 4.35967 Protection fault: 0.7345 0.7478 1.8107 0.8031 9.33968 Pipe latency: 33.006 16.398 -50.31 33.475 1.42368 AF_UNIX sock stream latency: 14.5093 30.910 113.03 30.715 111.692 Process fork+exit: 219.8 222.8 1.3648 229.37 4.35623 Process fork+execve: 876.14 873.28 -0.32 868.66 -0.8533 Process fork+/bin/sh -c: 2830 2876.5 1.6431 2958 4.52296 File /var/tmp/XXX write bw: 1193497 1195536 0.1708 118657 -0.5799 Pagefaults on /var/tmp/XXX: 3.1272 3.2117 2.7020 3.2521 3.99398 Also, kernel compile times show no difference with this patch applied. [pbadari@us.ibm.com: Avoid unnecessary PURR reading] Signed-off-by: NMichael Neuling <mikey@neuling.org> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Jay Lan <jlan@engr.sgi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: NJoe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
- Fix resource leakage in error case within detect_cache_attributes() - Don't register hotcpu notifier when cache_add_dev() returns error - Introduce cache_dev_map cpumask to track whether cache interface for CPU is successfully added by cache_add_dev() or not. cache_add_dev() may fail with out of memory error. In order to avoid cache_remove_dev() with that uninitialized cache interface when CPU_DEAD event is delivered we need to have the cache_dev_map cpumask. (We cannot change cache_add_dev() from CPU_ONLINE event handler to CPU_UP_PREPARE event handler. Because cache_add_dev() needs to do cpuid and store the results with its CPU online.) [nix.or.die@googlemail.com: fix a section mismatch warning] Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Andi Kleen <ak@suse.de> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: NGabriel Craciunescu <nix.or.die@googlemail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
- Clear kobject in percpu device_mce before calling sysdev_register() with Because mce_create_device() may fail and it leaves kobject filled with junk. It will be the problem when mce_create_device() will be called next time. - Fix error handling in mce_create_device() Error handling should not do sysdev_remove_file() with not yet added attributes. - Don't register hotcpu notifier when mce_create_device() returns error - Do mce_create_device() in CPU_UP_PREPARE instead of CPU_ONLINE Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Andi Kleen <ak@suse.de> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-