Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 26 10月, 2014 4 次提交
    • D
      Merge branch 'sunvnet-napi' · 9286ae01
      由 David S. Miller 提交于 
      Sowmini Varadhan says:

====================
sunvnet: NAPIfy sunvnet

This patchset converts the sunvnet driver to use the NAPI framework.
Changes since v4 to Patch1:
  vnet_event accumulates LDC_EVENT_* bits into rx_event.
  vnet_event_napi() unrolls send_events() logic to process all rx_event bits.
Changes since v5:
  Patch 1: use net_device.h definition for NAPI_POLL_WEIGHT.
  Drop sparclinux changes (patch3) per David Miller feedback

Patch 1 in the series addresses the packet-receive path- all
the vnet_event() processing is moved into NAPI context.
This patch is dependant on the sparc-next commit:
  "sparc64: Add vio_set_intr() to enable/disable Rx interrupts"
  (sparc commit id ca605b7d)

Patch 2 uses RCU to fix race conditions between vnet_port_remove and
paths that access/modify port-related state, such as vnet_start_xmit.

Patch 3 leverages from the NAPIfied Rx path,
dropping superfluous usage of the irqsave/irqrestores on the vio.lock
where possible.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9286ae01
    • S
      sunvnet: Remove irqsave/irqrestore on vio.lock · 13b13dd9
      由 Sowmini Varadhan 提交于 
      After the  NAPIfication of sunvnet, we no longer need to
synchronize by doing irqsave/restore on vio.lock in the
I/O fastpath.

NAPI ->poll() is non-reentrant, so all RX processing occurs
strictly in a serialized environment. TX reclaim is done in NAPI
context, so the netif_tx_lock can be used to serialize
critical sections between Tx and Rx paths.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      13b13dd9
    • S
      sunvnet: Use RCU to synchronize port usage with vnet_port_remove() · 2a968dd8
      由 Sowmini Varadhan 提交于 
      A vnet_port_remove could be triggered as a result of an ldm-unbind
operation by the peer, module unload, or other changes to the
inter-vnet-link configuration.  When this is concurrent with
vnet_start_xmit(), there are several race sequences possible,
such as

thread 1                                    thread 2
vnet_start_xmit
-> tx_port_find
   spin_lock_irqsave(&vp->lock..)
   ret = __tx_port_find(..)
   spin_lock_irqrestore(&vp->lock..)
                                           vio_remove -> ..
                                               ->vnet_port_remove
                                           spin_lock_irqsave(&vp->lock..)
                                           cleanup
                                           spin_lock_irqrestore(&vp->lock..)
                                           kfree(port)
/* attempt to use ret will bomb */

This patch adds RCU locking for port access so that vnet_port_remove
will correctly clean up port-related state.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NDwight Engen <dwight.engen@oracle.com>
Acked-by: NBob Picco <bob.picco@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2a968dd8
    • S
      sunvnet: NAPIfy sunvnet · 69088822
      由 Sowmini Varadhan 提交于 
      Move Rx packet procssing to the NAPI poll callback.
Disable VIO interrupt and unconditioanlly go into NAPI
context from vnet_event.

Note that we want to minimize the number of LDC
STOP/START messages sent. Specifically, do not send a STOP
message if vnet_walk_rx does not read all the available descriptors
because of the NAPI budget limitation. Instead, note the end index
as part of port state, and resume from this index when the
next poll callback is triggered.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NRaghuram Kothakota <raghuram.kothakota@oracle.com>
Acked-by: NDwight Engen <dwight.engen@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      69088822
  3. 25 10月, 2014 9 次提交
  5. 24 10月, 2014 18 次提交
    • G
      natsemi/macsonic: Remove superfluous interrupt disable/restore · d4c3363e
      由 Geert Uytterhoeven 提交于 
      As of commit e4dc601b ("m68k: Disable/restore interrupts in
hwreg_present()/hwreg_write()"), this is no longer needed.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d4c3363e
    • G
      cirrus/mac89x0: Remove superfluous interrupt disable/restore · 7f30b742
      由 Geert Uytterhoeven 提交于 
      As of commit e4dc601b ("m68k: Disable/restore interrupts in
hwreg_present()/hwreg_write()"), this is no longer needed.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7f30b742
    • R
      net: typhoon: Remove redundant casts · 00fd5d94
      由 Rasmus Villemoes 提交于 
      Both image_data and typhoon_fw->data are const u8*, so the cast to u8*
is unnecessary and confusing.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NDavid Dillow <dave@thedillows.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      00fd5d94
    • S
      Removed unused function sctp_addr_is_valid() · 16704b12
      由 Sébastien Barré 提交于 
      sctp_addr_is_valid() only appeared in its definition.
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NSébastien Barré <sebastien.barre@uclouvain.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      16704b12
    • D
      Merge branch 'ipv6_route' · fad71e4a
      由 David S. Miller 提交于 
      Martin KaFai Lau says:

====================
ipv6: Reduce the number of fib6_lookup() calls from ip6_pol_route()

This patch set is trying to reduce the number of fib6_lookup()
calls from ip6_pol_route().

I have adapted davem's udpflooda and kbench_mod test
(https://git.kernel.org/pub/scm/linux/kernel/git/davem/net_test_tools.git) to
support IPv6 and here is the result:

Before:
[root]# for i in $(seq 1 3); do time ./udpflood -l 20000000 -c 250 2401:face:face:face::2; done

real    0m34.190s
user    0m3.047s
sys     0m31.108s

real    0m34.635s
user    0m3.125s
sys     0m31.475s

real    0m34.517s
user    0m3.034s
sys     0m31.449s

[root]# insmod ip6_route_kbench.ko oif=2 src=2401:face:face:face::1 dst=2401:face:face:face::2
[  660.160976] ip6_route_kbench: ip6_route_output tdiff: 933
[  660.207261] ip6_route_kbench: ip6_route_output tdiff: 988
[  660.253492] ip6_route_kbench: ip6_route_output tdiff: 896
[  660.298862] ip6_route_kbench: ip6_route_output tdiff: 898

After:
[root]# for i in $(seq 1 3); do time ./udpflood -l 20000000 -c 250 2401:face:face:face::2; done

real    0m32.695s
user    0m2.925s
sys     0m29.737s

real    0m32.636s
user    0m3.007s
sys     0m29.596s

real    0m32.797s
user    0m2.866s
sys     0m29.898s

[root]# insmod ip6_route_kbench.ko oif=2 src=2401:face:face:face::1 dst=2401:face:face:face::2
[  881.220793] ip6_route_kbench: ip6_route_output tdiff: 684
[  881.253477] ip6_route_kbench: ip6_route_output tdiff: 640
[  881.286867] ip6_route_kbench: ip6_route_output tdiff: 630
[  881.320749] ip6_route_kbench: ip6_route_output tdiff: 653

/****************************** udpflood.c ******************************/
/* It is an adaptation of the Eric Dumazet's and David Miller's
 * udpflood tool, by adding IPv6 support.
 */

typedef uint32_t u32;

static int debug =3D 0;

/* Allow -fstrict-aliasing */
typedef union sa_u {
	struct sockaddr_storage a46;
	struct sockaddr_in a4;
	struct sockaddr_in6 a6;
} sa_u;

static int usage(void)
{
	printf("usage: udpflood [ -l count ] [ -m message_size ] [ -c num_ip_addrs=
 ] IP_ADDRESS\n");
	return -1;
}

static u32 get_last32h(const sa_u *sa)
{
	if (sa->a46.ss_family =3D=3D PF_INET)
		return ntohl(sa->a4.sin_addr.s_addr);
	else
		return ntohl(sa->a6.sin6_addr.s6_addr32[3]);
}

static void set_last32h(sa_u *sa, u32 last32h)
{
	if (sa->a46.ss_family =3D=3D PF_INET)
		sa->a4.sin_addr.s_addr =3D htonl(last32h);
	else
		sa->a6.sin6_addr.s6_addr32[3] =3D htonl(last32h);
}

static void print_saddr(const sa_u *sa, const char *msg)
{
	char buf[64];

	if (!debug)
		return;

	switch (sa->a46.ss_family) {
	case PF_INET:
		inet_ntop(PF_INET, &(sa->a4.sin_addr.s_addr), buf,
			  sizeof(buf));
		break;
	case PF_INET6:
		inet_ntop(PF_INET6, &(sa->a6.sin6_addr), buf, sizeof(buf));
		break;
	}

	printf("%s: %s\n", msg, buf);
}

static int send_packets(const sa_u *sa, size_t num_addrs, int count, int ms=
g_sz)
{
	char *msg =3D malloc(msg_sz);
	sa_u saddr;
	u32 start_addr32h, end_addr32h, cur_addr32h;
	int fd, i, err;

	if (!msg)
		return -ENOMEM;

	memset(msg, 0, msg_sz);

	memcpy(&saddr, sa, sizeof(saddr));
	cur_addr32h =3D start_addr32h =3D get_last32h(&saddr);
	end_addr32h =3D start_addr32h + num_addrs;

	fd =3D socket(saddr.a46.ss_family, SOCK_DGRAM, 0);
	if (fd < 0) {
		perror("socket");
		err =3D fd;
		goto out_nofd;
	}

	/* connect to avoid the kernel spending time in figuring
	 * out the source address (i.e pin the src address)
	 */
	err =3D connect(fd, (struct sockaddr *) &saddr, sizeof(saddr));
	if (err < 0) {
		perror("connect");
		goto out;
	}

	print_saddr(&saddr, "start_addr");
	for (i =3D 0; i < count; i++) {
		print_saddr(&saddr, "sendto");
		err =3D sendto(fd, msg, msg_sz, 0, (struct sockaddr *)&saddr,
			     sizeof(saddr));
		if (err < 0) {
			perror("sendto");
			goto out;
		}

		if (++cur_addr32h >=3D end_addr32h)
			cur_addr32h =3D start_addr32h;
		set_last32h(&saddr, cur_addr32h);
	}

	err =3D 0;
out:
	close(fd);
out_nofd:
	free(msg);
	return err;
}

int main(int argc, char **argv, char **envp)
{
	int port, msg_sz, count, num_addrs, ret;

	sa_u start_addr;

	port =3D 6000;
	msg_sz =3D 32;
	count =3D 10000000;
	num_addrs =3D 1;

	while ((ret =3D getopt(argc, argv, "dl:s:p:c:")) >=3D 0) {
		switch (ret) {
		case 'l':
			sscanf(optarg, "%d", &count);
			break;
		case 's':
			sscanf(optarg, "%d", &msg_sz);
			break;
		case 'p':
			sscanf(optarg, "%d", &port);
			break;
		case 'c':
			sscanf(optarg, "%d", &num_addrs);
			break;
		case 'd':
			debug =3D 1;
			break;
		case '?':
			return usage();
		}
	}

	if (num_addrs < 1)
		return usage();

	if (!argv[optind])
		return usage();

	start_addr.a4.sin_port =3D htons(port);
	if (inet_pton(PF_INET, argv[optind], &start_addr.a4.sin_addr))
		start_addr.a46.ss_family =3D PF_INET;
	else if (inet_pton(PF_INET6, argv[optind], &start_addr.a6.sin6_addr.s6_add=
r))
		start_addr.a46.ss_family =3D PF_INET6;
	else
		return usage();

	return send_packets(&start_addr, num_addrs, count, msg_sz);
}

/****************** ip6_route_kbench_mod.c ******************/

/* We can't just use "get_cycles()" as on some platforms, such
 * as sparc64, that gives system cycles rather than cpu clock
 * cycles.
 */

static inline unsigned long long get_tick(void)
{
	unsigned long long t;

	__asm__ __volatile__("rd %%tick, %0" : "=r" (t));
	return t;
}
static inline unsigned long long get_tick(void)
{
	unsigned long long t;

	rdtscll(t);

	return t;
}
static inline unsigned long long get_tick(void)
{
	return get_cycles();
}

static int flow_oif = DEFAULT_OIF;
static int flow_iif = DEFAULT_IIF;
static u32 flow_mark = DEFAULT_MARK;
static struct in6_addr flow_dst_ip_addr;
static struct in6_addr flow_src_ip_addr;
static int flow_tos = DEFAULT_TOS;

static char dst_string[64];
static char src_string[64];

module_param_string(dst, dst_string, sizeof(dst_string), 0);
module_param_string(src, src_string, sizeof(src_string), 0);

static int __init flow_setup(void)
{
	if (dst_string[0] &&
	    !in6_pton(dst_string, -1, &flow_dst_ip_addr.s6_addr[0], -1, NULL)) {
		pr_info("cannot parse \"%s\"\n", dst_string);
		return -1;
	}

	if (src_string[0] &&
	    !in6_pton(src_string, -1, &flow_src_ip_addr.s6_addr[0], -1, NULL)) {
		pr_info("cannot parse \"%s\"\n", dst_string);
		return -1;
	}

	return 0;
}

module_param_named(oif, flow_oif, int, 0);
module_param_named(iif, flow_iif, int, 0);
module_param_named(mark, flow_mark, uint, 0);
module_param_named(tos, flow_tos, int, 0);

static int warmup_count = DEFAULT_WARMUP_COUNT;
module_param_named(count, warmup_count, int, 0);

static void flow_init(struct flowi6 *fl6)
{
	memset(fl6, 0, sizeof(*fl6));
	fl6->flowi6_proto = IPPROTO_ICMPV6;
	fl6->flowi6_oif = flow_oif;
	fl6->flowi6_iif = flow_iif;
	fl6->flowi6_mark = flow_mark;
	fl6->flowi6_tos = flow_tos;
	fl6->daddr = flow_dst_ip_addr;
	fl6->saddr = flow_src_ip_addr;
}

static struct sk_buff * fake_skb_get(void)
{
	struct ipv6hdr *hdr;
	struct sk_buff *skb;

	skb = alloc_skb(4096, GFP_KERNEL);
	if (!skb) {
		pr_info("Cannot alloc SKB for test\n");
		return NULL;
	}
	skb->dev = __dev_get_by_index(&init_net, flow_iif);
	if (skb->dev == NULL) {
		pr_info("Input device (%d) does not exist\n", flow_iif);
		goto err;
	}

	skb_reset_mac_header(skb);
	skb_reset_network_header(skb);
	skb_reserve(skb, MAX_HEADER + sizeof(struct ipv6hdr));
	hdr = ipv6_hdr(skb);

	hdr->priority = 0;
	hdr->version = 6;
	memset(hdr->flow_lbl, 0, sizeof(hdr->flow_lbl));
	hdr->payload_len = htons(sizeof(struct icmp6hdr));
	hdr->nexthdr = IPPROTO_ICMPV6;
	hdr->saddr = flow_src_ip_addr;
	hdr->daddr = flow_dst_ip_addr;
	skb->protocol = htons(ETH_P_IPV6);
	skb->mark = flow_mark;

	return skb;
err:
	kfree_skb(skb);
	return NULL;
}

static void do_full_output_lookup_bench(void)
{
	unsigned long long t1, t2, tdiff;
	struct rt6_info *rt;
	struct flowi6 fl6;
	int i;

	rt = NULL;

	for (i = 0; i < warmup_count; i++) {
		flow_init(&fl6);

		rt = (struct rt6_info *)ip6_route_output(&init_net, NULL, &fl6);
		if (IS_ERR(rt))
			break;
		ip6_rt_put(rt);
	}
	if (IS_ERR(rt)) {
		pr_info("ip_route_output_key: err=%ld\n", PTR_ERR(rt));
		return;
	}

	flow_init(&fl6);

	t1 = get_tick();
	rt = (struct rt6_info *)ip6_route_output(&init_net, NULL, &fl6);
	t2 = get_tick();
	if (!IS_ERR(rt))
		ip6_rt_put(rt);

	tdiff = t2 - t1;
	pr_info("ip6_route_output tdiff: %llu\n", tdiff);
}

static void do_full_input_lookup_bench(void)
{
	unsigned long long t1, t2, tdiff;
	struct sk_buff *skb;
	struct rt6_info *rt;
	int err, i;

	skb = fake_skb_get();
	if (skb == NULL)
		goto out_free;

	err = 0;
	local_bh_disable();
	for (i = 0; i < warmup_count; i++) {
		ip6_route_input(skb);
		rt = (struct rt6_info *)skb_dst(skb);
		err = (!rt || rt == init_net.ipv6.ip6_null_entry);
		skb_dst_drop(skb);
		if (err)
			break;
	}
	local_bh_enable();

	if (err) {
		pr_info("Input route lookup fails\n");
		goto out_free;
	}

	local_bh_disable();
	t1 = get_tick();
	ip6_route_input(skb);
	t2 = get_tick();
	local_bh_enable();

	rt = (struct rt6_info *)skb_dst(skb);
	err = (!rt || rt == init_net.ipv6.ip6_null_entry);
	skb_dst_drop(skb);
	if (err) {
		pr_info("Input route lookup fails\n");
		goto out_free;
	}

	tdiff = t2 - t1;
	pr_info("ip6_route_input tdiff: %llu\n", tdiff);

out_free:
	kfree_skb(skb);
}

static void do_full_lookup_bench(void)
{
	if (!flow_iif)
		do_full_output_lookup_bench();
	else
		do_full_input_lookup_bench();
}

static void do_bench(void)
{
	do_full_lookup_bench();
	do_full_lookup_bench();
	do_full_lookup_bench();
	do_full_lookup_bench();
}

static int __init kbench_init(void)
{
	if (flow_setup())
		return -EINVAL;

	pr_info("flow [IIF(%d),OIF(%d),MARK(0x%08x),D("IP6_FMT"),"
		"S("IP6_FMT"),TOS(0x%02x)]\n",
		flow_iif, flow_oif, flow_mark,
		IP6_PRT(flow_dst_ip_addr),
		IP6_PRT(flow_src_ip_addr),
		flow_tos);

	if (!cpu_has_tsc) {
		pr_err("X86 TSC is required, but is unavailable.\n");
		return -EINVAL;
	}

	pr_info("sizeof(struct rt6_info)==%zu\n", sizeof(struct rt6_info));

	do_bench();

	return -ENODEV;
}

static void __exit kbench_exit(void)
{
}

module_init(kbench_init);
module_exit(kbench_exit);
MODULE_LICENSE("GPL");
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fad71e4a
    • M
      ipv6: Avoid redoing fib6_lookup() with reachable = 0 by saving fn · 367efcb9
      由 Martin KaFai Lau 提交于 
      This patch save the fn before doing rt6_backtrack.
Hence, without redo-ing the fib6_lookup(), saved_fn can be used
to redo rt6_select() with RT6_LOOKUP_F_REACHABLE off.

Some minor changes I think make sense to review as a single patch:
* Remove the 'out:' goto label.
* Remove the 'reachable' variable. Only use the 'strict' variable instead.

After this patch, "failing ip6_ins_rt()" should be the only case that
requires a redo of fib6_lookup().

Cc: David Miller <davem@davemloft.net>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      367efcb9
    • M
      ipv6: Avoid redoing fib6_lookup() for RTF_CACHE hit case · 94c77bb4
      由 Martin KaFai Lau 提交于 
      When there is a RTF_CACHE hit, no need to redo fib6_lookup()
with reachable=0.

Cc: David Miller <davem@davemloft.net>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      94c77bb4
    • M
      ipv6: Remove BACKTRACK macro · a3c00e46
      由 Martin KaFai Lau 提交于 
      It is the prep work to reduce the number of calls to fib6_lookup().

The BACKTRACK macro could be hard-to-read and error-prone due to
its side effects (mainly goto).

This patch is to:
1. Replace BACKTRACK macro with a function (fib6_backtrack) with the following
   return values:
   * If it is backtrack-able, returns next fn for retry.
   * If it reaches the root, returns NULL.
2. The caller needs to decide if a backtrack is needed (by testing
   rt == net->ipv6.ip6_null_entry).
3. Rename the goto labels in ip6_pol_route() to make the next few
   patches easier to read.

Cc: David Miller <davem@davemloft.net>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a3c00e46
    • K
      net: Remove trailing whitespace in tcp.h icmp.c syncookies.c · 105970f6
      由 Kenjiro Nakayama 提交于 
      Remove trailing whitespace in tcp.h icmp.c syncookies.c
Signed-off-by: NKenjiro Nakayama <nakayamakenjiro@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      105970f6
    • C
      i40e: Bump version · e8720db1
      由 Catherine Sullivan 提交于 
      Bump i40e version to 1.0.21.
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Tested-By: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      e8720db1
    • A
      i40e: Moving variable declaration out of the loops · bf00b376
      由 Akeem G Abodunrin 提交于 
      Move the three variables out of the loop, so it only declares once.

Change-ID: I436913777c7da3c16dc0031b59e3ffa61de74718
Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: NPatrick Lu <patrick.lu@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      bf00b376
    • M
      i40e: Add 10GBaseT support · 5960d33f
      由 Mitch Williams 提交于 
      Add driver support for 10GBaseT device.

Change-ID: I4be6ed847ac0bddd220b9878a95c523b32038174
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      5960d33f
    • M
      i40e: process link events when setting up switch · a34a6711
      由 Mitch Williams 提交于 
      Add code to handle link events when updating the PF switch. This
allows link information to be properly provided to VFs in all cases.

Change-ID: If314c95f3d39259ef4c40a4a3b823381e28fb24f
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      a34a6711
    • A
      i40e: Fix a bug where Rx would stop after some time · cafa2ee6
      由 Anjali Singhai Jain 提交于 
      Move the setting of flow control because this should be done at a pf level not
a vsi level. Also add a sleep and restart an to fix a bug where Rx would stop
after some stress.

Change-ID: I9a93d8c2ff27c39339eb00bc4ec1225e43900be0
Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      cafa2ee6
    • N
      i40e/i40evf: Use usleep_range() instead of udelay() · f98a2006
      由 Neerav Parikh 提交于 
      As per the Documentation/timers/timers-howto.txt it is preferred to use
usleep_range() instead of udelay() if the delay value is > 10us in
non-atomic contexts.
So, replacing all the instances of udelay() with 10 or greater than 10
micro seconds delay in the driver and using usleep_range() instead.

Change-ID: Iaa2ab499a4c26f6005e5d86cc421407ef9de16c7
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NNeerav Parikh <neerav.parikh@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      f98a2006
    • J
      i40e/i40evf: Fix whitespace indentation · 8c570dcc
      由 Jeff Kirsher 提交于 
      This is one small step in making the indentation more consistent.  If
we truly want to align values, then use tabs rather than spaces.

Change-ID: I12368bc77a52f296d1843fdcb67201a7d7cd4749
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
      8c570dcc
    • J
      i40e: enable LSE poke and simplify link state · 1e701e09
      由 Jesse Brandeburg 提交于 
      The driver can do a simpler job of managing link state by simply
using the admin queue receive event for link events as a doorbell
that tells the driver to update link state.

Additionally, add a workaround will help make sure the link state in the
hardware is consistent with the link state the driver is reporting
by refreshing the link state every service task interval.

Change-ID: Ib95b5b7b8cc016e97d8009f6363c9f9eed301444
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      1e701e09
    • J
      i40e: mask phy events · 7e2453fe
      由 Jesse Brandeburg 提交于 
      Tell the firmware what kind of link related events the driver is
interested in.  In this case, just link up/down and qualified module
events are the ones the driver really cares about.

Change-ID: If132c812c340c8e1927c2caf6d55185296b66201
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      7e2453fe
  7. 23 10月, 2014 9 次提交