This patch implements QP operations for hip08 RoCE driver and
fixes some checkpatch warning about print message in QP function.
The QP operations includes create QP, query QP, modify QP and
destroy QP.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds CQ relevant operations for hip08 RoCE driver,
such as create CQ, destroy CQ, poll CQ and Request Completion
Notification(req_notify_cq).
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The MTT(SQWQE/SGE/RQWQE) and CQE in hip08 can support multi hop
addressing. The address of MTT/CQE can be retrieved by the BT
(Base Address Table) with multi hop addressing.

This patch is to update the interfaces in HEM to support multi hop
addressing for the MTT/CQE.
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The contexts (QPC/MTPT/CQC/SRQC) in hip08 can support multi hop
addressing. The address of context can be retrieved by the
BT (Base Address Table) with multi hop addressing. The first hop
BT BA can be retrieved from the RAM in the chip by the bt_idx and
bt_num.

This patch is to add the interfaces in HEM to support multi hop
addressing for the contexts.
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In hip08 SoC, the hardware implementation of mailbox command
has changed with hip06 SoC. As a result, it adjusts the
architecture of the command code and implements the interfaces
of mailbox for hip08 SoC.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The profile's content mainly set some specifications and obtain
some hardware resources by implementing the relative commands.
Because max sge num of send queue is not the same with receive
queue in hip08, we modified the calculation of props->max_sge
in query_device ops.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to support the scalability of the hardware version, the
features irrelevant to the hardware will be located in the hns-roce.ko,
and the hardware relevant operations will be located in hns_roce_hw_v1.ko
or hns_roce_hw_v2.ko based on the series chips.

The hip08 RoCE engine is a PCI device, hip06 RoCE engine is a platform
device. In order to support both platform device and PCI device, We
replace &hr_dev->pdev->dev with hr_dev->dev in hns-roce.ko as belows:
	Before modification:
		struct device *dev = hr_dev->dev;
	After modification:
		struct device *dev = &hr_dev->pdev->dev;

	The related structure:
	struct hns_roce_dev {
		...
		struct platform_device  *pdev;
		struct pci_dev		*pci_dev;
		struct device		*dev;
		...
	}
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Move the data member called priv from hns_roce_hw to hns_roce_dev
structure in order to support multiple hns_roce devices in one
system at the same time. For example, there are two hip06 engines
in the system.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The hardware relevant definitions and operations are implemented
in hns_roce_hw_v* file. According to the diversity chips, the file
is named as hns_roce_hw_v1.c or hns_roce_hw_v2.c etc.

The general software process flow, common structures and allocated
algorithms are implemented in other files located in hns roce driver.

In order to support the scalability of the hardware version, the
common driver features are in the hns-roce.ko, and the hardware
relevant operations are in hns_roce_hw_v1.ko or hns_roce_hw_v2.ko
based on the series chips.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The hns_roce_v1_create_lp_qp() returns NULL on error, not error pointers.

Fixes: bfcc681b ("IB/hns: Fix the bug when free mr")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

drivers/infiniband/hw/hns/hns_roce_hw_v1.c:2026:5-8: Unneeded variable: "ret". Return "0" on line 2046

 Remove unneeded variable used to store return value.

Generated by: scripts/coccinelle/misc/returnvar.cocci

Fixes: 7d1b6a678e0b ("IB/hns: Support compile test for hns RoCE driver")
CC: Matan Barak <matanb@mellanox.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch correct the comment style warnings caught by
checkpatch.pl script.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When opcode of work request is RDMA read and write, it
should use rdma_wr to get remote_addr and rkey. This
patch fixes it.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When destroyed rc qp, the hr_qp will be used after freed. This patch
will fix it.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In hip06 SoC, RoCE driver creates 8 reserved loopback QPs to
ensure zero wqe when free mr. However, if the enabled phy
port number is less than 6, it will fail in polling cqe with
8 reserved loopback QPs.

In order to solve this problem, the number of loopback Qps
will be adjusted based on the number of enabled phy port.
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The msleep(1) may do not sleep 1 ms as expected
and will sleep longer. The simple conversion from
msleep to usleep_range between 1ms and 2ms can solve an
issue.

The full and comprehensive explanation can be found at [1] and [2].

[1] https://lkml.org/lkml/2007/8/3/250
[2] Documentation/timers/timers-howto.txt
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This typo is quite common.  Fix it and add it to the spelling file so
that checkpatch catches it earlier.

Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.orgSigned-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix typos and add the following to the scripts/spelling.txt:

      momery||memory

Link: http://lkml.kernel.org/r/20170317011131.6881-1-sboyd@codeaurora.orgSigned-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

rdma_ah_attr can now be either ib or roce allowing
core components to use one type or the other and also
to define attributes unique to a specific type. struct
ib_ah is also initialized with the type when its first
created. This ensures that calls such as modify_ah
dont modify the type of the address handle attribute.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Reviewed-by: NSean Hefty <sean.hefty@intel.com>
Reviewed-by: NNiranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Modify core and driver components to use accessor functions
introduced to access individual fields of rdma_ah_attr
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Reviewed-by: NSean Hefty <sean.hefty@intel.com>
Reviewed-by: NNiranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

hns_roce_v1_cq_set_ci() calls roce_set_bit() on an uninitialized field,
which will then change only a few of its bits, causing a warning with
the latest gcc:

infiniband/hw/hns/hns_roce_hw_v1.c: In function 'hns_roce_v1_cq_set_ci':
infiniband/hw/hns/hns_roce_hw_v1.c:1854:23: error: 'doorbell[1]' is used uninitialized in this function [-Werror=uninitialized]
  roce_set_bit(doorbell[1], ROCEE_DB_OTHERS_H_ROCEE_DB_OTH_HW_SYNS_S, 1);

The code is actually correct since we always set all bits of the
port_vlan field, but gcc correctly points out that the first
access does contain uninitialized data.

This initializes the field to zero first before setting the
individual bits.

Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

hns_roce_hw_v1.c uses DT interfaces but relies on implict inclusion of
linux/of.h which means that changes in other headers could break the
build, as happened in -next for arm64 today.  Add an explicit include.
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If the resources of cq are freed while executing the user case, hardware
can not been notified in hip06 SoC. Then hardware will hold on when it
writes the cq buffer which has been released.

In order to slove this problem, RoCE driver checks the CQE counter, and
ensure that the outstanding CQE have been written. Then the cq buffer
can be released.
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If the resources of mr are freed while executing the user case, hardware
can not been notified in hip06 SoC. Then hardware will hold on when it
reads the payload by the PA which has been released.

In order to slove this problem, RoCE driver creates 8 reserved loopback
QPs to ensure zero wqe when free mr. When the mac address is reset, in
order to avoid loopback failure, we need to release the reserved loopback
QPs and recreate them.
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If send queue is still working when qp is in reset state by modify qp
in destroy qp function, hardware will hold on and don't work in hip06
SoC. In current codes, RoCE driver check hardware pointer of sending and
hardware pointer of processing to ensure that hardware has processed all
the dbs of this qp. But while the environment of wire becomes not good,
The checking time maybe too long.

In order to solve this problem, RoCE driver created a workqueue at probe
function. If there is a timeout when checking the status of qp, driver
initialize work entry and push it into the workqueue, Work function will
finish checking and release the related resources later.
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDongdong Huang(Donald) <hdd.huang@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch correct the comment style errors caught by
checkpatch.pl script
Signed-off-by: NSalil Mehta  <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch modified the output query info qp_attr->port_num
to fix bug in hip06.
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta  <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch modified the macro for the timeout when cmd is
processing as follows:
Before modification:
 enum {
	HNS_ROCE_CMD_TIME_CLASS_A       = 10000,
	HNS_ROCE_CMD_TIME_CLASS_B       = 10000,
	HNS_ROCE_CMD_TIME_CLASS_C       = 10000,
 };
After modification:
 #define HNS_ROCE_CMD_TIMEOUT_MSECS	10000
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta  <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In old code, the value of qp state from qpc was assigned for
attr->qp_state. The value may be an error while attr_mask &
IB_QP_STATE is zero.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta  <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch modified the condition of notifying hardware loopback.

In hip06, RoCE Engine has several ports, one QP is related
to one port. hardware only support loopback in the same port,
not in the different ports.

So, If QP related to port N, the dmac in the QP context equals
the smac of the local port N or the loop_idc is 1, we should
set loopback bit in QP context to notify hardware.
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NSalil Mehta  <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch mainly adds self loopback support for CM.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NPeter Chen <luck.chen@huawei.com>
Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta  <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch added the code for refreshing CQ CI using TPTR in hip06
SoC.

We will send a doorbell to hardware for refreshing CQ CI when user
succeed to poll a cqe. But it will be failed if the doorbell has
been blocked. So hardware will read a special buffer called TPTR
to get the lastest CI value when the cq is almost full.

This patch support the special CI buffer as follows:
a) Alloc the memory for TPTR in the hns_roce_tptr_init function and
   free it in hns_roce_tptr_free function, these two functions will
   be called in probe function and in the remove function.
b) Add the code for computing offset(every cq need 2 bytes) and
   write the dma addr to every cq context to notice hardware in the
   function named hns_roce_v1_write_cqc.
c) Add code for mapping TPTR buffer to user space in function named
   hns_roce_mmap. The mapping distinguish TPTR and UAR of user mode
   by vm_pgoff(0: UAR, 1: TPTR, others:invaild) in hip06.
d) Alloc the code for refreshing CQ CI using TPTR in the function
   named hns_roce_v1_poll_cq.
e) Add some variable definitions to the related structure.
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NDongdong Huang(Donald) <hdd.huang@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NSalil Mehta  <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In old code, It only added the interface for querying non-specific
QP. This patch mainly adds an interface for querying QP1.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta  <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch removes the redundant code lines present in the
functions get_send_wqe() and get_recv_wqe(). This also fixes
the error in calculating the SQ WQE.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

It doesn't need to assign for the filed of qp state in qpc separately
when qp happen to migrate state which supported in RoCE engine v1.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The rq head in qpc was zero will miss the rq wqes which
have be sent, so here we should take the real value.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some items of qpc need to take user param when modified qp
state.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDongdong Huang(Donald) <hdd.huang@huawei.com>
Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The Ack timeout of qpc need a lower limit value,otherwise
the read performance will be very lower.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDongdong Huang(Donald) <hdd.huang@huawei.com>
Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

While post failed, hns roce should return the wr failed to user.
We omitted this while qp type is wrong and fixed it.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDongdong Huang(Donald) <hdd.huang@huawei.com>
Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch deleted the sqp_start from the structure hns_roce_caps, and
modified the calculation of the qp number.
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>