cm4000_cs.c and cm4040_cs.c call the internal release function with
an argument of wrong type. this fixes bug #8485
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Cc: Bill McConnaughey <mcconnau@biochem.wustl.edu>
Cc: Natalie Protasevich <protasnb@gmail.com>
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On some systems some PFNs reported by the early initialization code as
'nosave' may be invalid.  If we try to set the corresponding bits in the
hibernation bitmap, BUG_ON() in memory_bm_find_bit() will be triggered and
the system won't be able to boot (cf.
https://bugzilla.novell.com/show_bug.cgi?id=296242).

Prevent this from happening by verifying if the 'nosave' PFNs are valid in
mark_nosave_pages().
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ecryptfs_init() exits without doing any cleanup jobs if
ecryptfs_init_messaging() fails.  In that case, eCryptfs leaves
sysfs entries, leaks memory, and causes an invalid page fault.
This patch fixes the problem.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: NMichael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NGabriel Craciunescu <nix.or.die@googlemail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After /proc/sys rewrite it was left unused.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Misplaced #endif is hiding the numa_zonelist_order sysctl when !SECURITY.
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When ecryptfs_lookup() is called against special files, eCryptfs generates
the following errors because it tries to treat them like regular eCryptfs
files.

Error opening lower file for lower_dentry [0xffff810233a6f150], lower_mnt [0xffff810235bb4c80], and flags
[0x8000]
Error opening lower_file to read header region
Error attempting to read the [user.ecryptfs] xattr from the lower file; return value = [-95]
Valid metadata not found in header region or xattr region; treating file as unencrypted

For instance, the problem can be reproduced by the steps below.

  # mkdir /root/crypt /mnt/crypt
  # mount -t ecryptfs /root/crypt /mnt/crypt
  # mknod /mnt/crypt/c0 c 0 0
  # umount /mnt/crypt
  # mount -t ecryptfs /root/crypt /mnt/crypt
  # ls -l /mnt/crypt

This patch fixes it by adding a check similar to directories and
symlinks.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: NMichael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Connect up the fallocate() system call.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This builds upon my previous attempts to resolve some jitter problems seen
with the Matrox G450 and G550 -based cards, including odd disparities observed
between x86 and Power -based machines in a somewhat less hackish way (removing
the hacked ifdefs).

Apparently, preference should be given to use the DVI PLL when frequencies
permit, the Standard PLL otherwise.  The max pixel clock for the panellink
interface is extracted from the PInS information on the card and used as a
limit to determine which PLL to use.
Signed-off-by: NPaul A. Clarke <pc@us.ibm.com>
Acked-by: NPetr Vandrovec <petr@vandrovec.name>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current version is very old and does not correctly specify how to
set the video mode.

Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- better handling of the pvr2 registers based on more up to date information.

Testing shows that it seems to work pretty well at 16bpp, 24bpp and 32bpp -
including proper rendering of the boot logo at all levels (previously this was
a bit broken even at 16bpp) and giving white against black text.  Really
detailed testing (eg with X11) requires support for the maple bus - which
isn't (currently - next project assuming this is okay) available, but I have
no reason to think this is broken.

Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reported by: Adrian McMenamin <adrianmcmenamin@gmail.com>

This driver will oops when the pseudo_palette[] is written as u32 but not when
written as u16.  When written as u32, it corrupts the adjacent 'mmio_base'
field of struct pvr2fb_par.  Fix by using framebuffer_alloc()/release() to
allocate struct fb_info and struct pvr2fb_par, and create the pseudo_palette[]
as part of struct pvr2fb_par.
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix compile warning ('map_override unused') if fbcon is compiled as a module
and CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=n.

[akpm@linux-foundation.org: cleanup]
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Visualize-EG, Graffiti and A4450A graphics cards on PARISC can
be configured in double-buffer and standard mode, but the stifb
driver supports standard mode only.
This patch detects double-buffered cards more reliable.

It is a real bugfix for a very nasty problem for all parisc users which have
wrongly configured their graphic card.  The problem: The stifb graphics driver
will not detect that the card is wrongly configured and then nevertheless just
enables the graphics mode, which it shouldn't.  In the end, the user will see
no further updates / boot messages on the screen.

We had documented this problem already on our FAQ
(http://parisc-linux.org/faq/index.html#viseg "Why do I get corrupted graphics
with my Vis-EG/Graffiti/A4450A card?") but people still run into this problem.
 So having this fix in as early as possible can help us.
Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Cc: <stable@kernel.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Need to initialize map_bh.b_state to zero.  Otherwise, in case of a faulty
user-buffer its possible to go into dio_zero_block() and submit a page by
mistake - since it checks for buffer_new().

http://marc.info/?l=linux-kernel&m=118551339032528&w=2

akpm: Linus had a (better) patch to just do a kzalloc() in there, but it got
lost.  Probably this version is better for -stable anwyay.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Acked-by: NJoe Jin <joe.jin@oracle.com>
Acked-by: NZach Brown <zach.brown@oracle.com>
Cc: gurudas pai <gurudas.pai@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I have had four seperate system lockups attributable to this exact problem
in two days of testing.  Instead of trying to handle all the weird end
cases and wrap, how about changing it to look for exactly what we appear
to want.

The following patch removes a couple races in setup_APIC_timer.  One occurs
when the HPET advances the COUNTER past the T0_CMP value between the time
the T0_CMP was originally read and when COUNTER is read.  This results in
a delay waiting for the counter to wrap.  The other results from the counter
wrapping.

This change takes a snapshot of T0_CMP at the beginning of the loop and
simply loops until T0_CMP has changed (a tick has happened).

<later>

I have one small concern about the patch.  I am not sure it meets the intent
as well as it should.  I think we are trying to match APIC timer interrupts up
with the hpet counter increment.  The event which appears to be disturbing
this loop in our test environment is the NMI watchdog.  What we believe has
been happening with the existing code is the setup_APIC_timer loop has read
the CMP value, and the NMI watchdog code fires for the first time.  This
results in a series of icache miss slowdowns and by the time we get back to
things it has wrapped.

I think this code is trying to get the CMP as close to the counter value as
possible.  If that is the intent, maybe we should really be testing against a
"window" around the CMP.  Something like COUNTER = CMP+/2.  It appears COUNTER
should get advanced every 89nSec (IIRC).  The above seems like an unreasonably
small window, but may be necessary.  Without documentation, I am not sure of
the original intent with this code.

In summary, this code fixes my boot hangs, but since I am not certain of the
intent of the existing code, I am not certain this has not introduced new bugs
or unexpected behaviors.
Signed-off-by: NRobin Holt <holt@sgi.com>
Acked-by: NAndi Kleen <ak@suse.de>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: "Aaron Durbin" <adurbin@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's a little problem in Documentation/vm/slabinfo.c
The code is using "%d" in a printf() call to print an 'unsigned long'.
This patch corrects it to use "%lu" instead.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>

The dynamic dma kmalloc creation can run into trouble if a
GFP_ATOMIC allocation is the first one performed for a certain size
of dma kmalloc slab.

- Move the adding of the slab to sysfs into a workqueue
  (sysfs does GFP_KERNEL allocations)
- Do not call kmem_cache_destroy() (uses slub_lock)
- Only acquire the slub_lock once and--if we cannot wait--do a trylock.

  This introduces a slight risk of the first kmalloc(x, GFP_DMA|GFP_ATOMIC)
  for a range of sizes failing due to another process holding the slub_lock.
  However, we only need to acquire the spinlock once in order to establish
  each power of two DMA kmalloc cache. The possible conflict is with the
  slub_lock taken during slab management actions (create / remove slab cache).

  It is rather typical that a driver will first fill its buffers using
  GFP_KERNEL allocations which will wait until the slub_lock can be acquired.
  Drivers will also create its slab caches first outside of an atomic
  context before starting to use atomic kmalloc from an interrupt context.

  If there are any failures then they will occur early after boot or when
  loading of multiple drivers concurrently. Drivers can already accomodate
  failures of GFP_ATOMIC for other reasons. Retries will then create the slab.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>

The MAX_PARTIAL checks were supposed to be an optimization. However, slab
shrinking is a manually triggered process either through running slabinfo
or by the kernel calling kmem_cache_shrink.

If one really wants to shrink a slab then all operations should be done
regardless of the size of the partial list. This also fixes an issue that
could surface if the number of partial slabs was initially above MAX_PARTIAL
in kmem_cache_shrink and later drops below MAX_PARTIAL through the
elimination of empty slabs on the partial list (rare). In that case a few
slabs may be left off the partial list (and only be put back when they
are empty).
Signed-off-by: NChristoph Lameter <clameter@sgi.com>

UIO currently contains a rather dubious statement which wants removing.

The actual questions around whether user space code that depends tightly
on kernel GPL code designed to co-work with it are derivative works of
the kernel is extremely complex, and since we don't have space for either
a masters length essay on legal issues or need to start flamewars lets
simply remove the comment and leave law to lawyers
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <tovalds@linux-foundation.org>

The default definition in asm-generic conflicts with Alpha's O_DIRECT,
so, like several other arches, it needs to be redefined.
Signed-off-by: NRichard Hendersion  <rth@twiddle.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.linux-nfs.org/pub/linux/nfs-2.6:
  SUNRPC: Replace flush_workqueue() with cancel_work_sync() and friends
  NFS: Replace flush_scheduled_work with cancel_work_sync() and friends
  SUNRPC: Don't call gss_delete_sec_context() from an rcu context
  NFSv4: Don't call put_rpccred() from an rcu callback
  NFS: Fix NFSv4 open stateid regressions
  NFSv4: Fix a locking regression in nfs4_set_mode_locked()
  NFS: Fix put_nfs_open_context
  SUNRPC: Fix a race in rpciod_down()

Trivial fix: mark the buffer to hexdump as const so callers could avoid
casting their const buffers when calling print_hex_dump().

The patch is really trivial and I suggest to consider it as a fix
(it fixes GCC warnings) and push it to current tree.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TCP]: H-TCP maxRTT estimation at startup
  [NETFILTER]: nf_nat: add symbolic dependency on IPv4 conntrack
  [NETFILTER]: ctnetlink: return EEXIST instead of EINVAL for existing nat'ed conntracks
  [NETFILTER]: ipt_recent: avoid a possible NULL pointer deref in recent_seq_open()
  [NET] net/core/utils: fix sparse warning
  [NetLabel]: add missing rcu_dereference() calls in the LSM domain mapping hash table
  [PATCH] mac80211: don't allow scanning in monitor mode
  [PATCH] mac80211: Fix sparse error for sta_last_seq_ctrl_read
  [PATCH] mac80211: use do { } while (0) for multi-line macros
  [PATCH] mac80211: missing dev_put in ieee80211_master_start_xmit

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix memory leak when cpu hotplugging.
  [SPARC64]: Do not assume sun4v chips have load-twin/store-init support.
  [SPARC64]: Fix hard-coding of cpu type output in /proc/cpuinfo on sun4v.
  [SPARC]: Centralize find_in_proplist() instead of duplicating N times.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: at91_mci: remove whitespace at the end of lines
  mmc: reorganize bounce buffer init
  wbsd: fix section mismatch warnings

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: (61 commits)
  sched: refine negative nice level granularity
  sched: fix update_stats_enqueue() reniced codepath
  sched: round a bit better
  sched: make the multiplication table more accurate
  sched: optimize update_rq_clock() calls in the load-balancer
  sched: optimize activate_task()
  sched: clean up set_curr_task_fair()
  sched: remove __update_rq_clock() call from entity_tick()
  sched: move the __update_rq_clock() call to scheduler_tick()
  sched debug: remove the 'u64 now' parameter from print_task()/_rq()
  sched: remove the 'u64 now' local variables
  sched: remove the 'u64 now' parameter from deactivate_task()
  sched: remove the 'u64 now' parameter from dequeue_task()
  sched: remove the 'u64 now' parameter from enqueue_task()
  sched: remove the 'u64 now' parameter from dec_nr_running()
  sched: remove the 'u64 now' parameter from inc_nr_running()
  sched: remove the 'u64 now' parameter from dec_load()
  sched: remove the 'u64 now' parameter from inc_load()
  sched: remove the 'u64 now' parameter from update_curr_load()
  sched: remove the 'u64 now' parameter from ->task_new()
  ...

Some versions of ld.so mmap the shared libraries right in over guest
memory, so compile lguest statically by default.

[ FC7 maps shared libraries very low, where the launcher maps guest's
  physical memory.  Quick fix is to link Launcher static, real fix is
  for 2.6.24. ]

-static is a simple fix. I expect this problem will be more common than we
like, as different distro's make different "improvements" to ld.so
Signed-off-by: NRonald G. Minnich <rminnich@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a Guest makes hypercall which sets a GDT entry to not present, we
currently set any segment registers using that GDT entry to 0.
Unfortunately, this is not sufficient: there are other ways of
altering GDT entries which will cause a fault.

The correct solution to do what Linux does: let them set any GDT value
they want and handle the #GP when popping causes a fault.  This has
the added benefit of making our Switcher slightly more robust in the
case of any other bugs which cause it to fault.

We kill the Guest if it causes a fault in the Switcher: it's the
Guest's responsibility to make sure it's not using segments when it
changes them.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lguest uses a host-supplied wallclock-based clocksource when the TSC
is not reliable.  As this is already in nanoseconds, I naively used a
multiplier of 1 and a shift of 0.

But update_wall_time() in its infinite wisdom decides to adjust the
clock a little (where does it think it's getting a more accurate time
from?)

It will happily tweak the multiplier... to 0, then -1.

So the "fix" is to use a shift of 22 like everyone else, and a
multiplier of 1 << 22.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 0fc4969b.  It was
always meant to be temporary, but it's generating more useless noise
than anything else, and we probably should never have done it in the
generic kernel (only had the people involved test it on their own).
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some cleanup with whitespace/tab at the end of lines.
Signed-off-by: NNicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Reorganize the code that initializes mmc_block's bounce buffer in
order to avoid warnings when MMC_BLOCK_BOUNCE isn't used.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

This patch fixes the following section mismatch warnings

...

WARNING: vmlinux.o(.init.text+0x29d40): Section mismatch: reference to .exit.text:wbsd_release_resources (between 'wbsd_init' and 'wbsd_probe')
WARNING: vmlinux.o(.init.text+0x29d49): Section mismatch: reference to .exit.text:wbsd_free_mmc (between 'wbsd_init' and 'wbsd_probe')
WARNING: vmlinux.o(.init.text+0x29f28): Section mismatch: reference to .exit.text:wbsd_free_mmc (between 'wbsd_init' and 'wbsd_probe')

...
Signed-off-by: NGabriel Craciunescu <nix.or.die@googlemail.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

refine the granularity of negative nice level tasks: let them
reschedule more often to offset the effect of them consuming
their wait_runtime proportionately slower. (This makes nice-0
task scheduling smoother in the presence of negatively
reniced tasks.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

the key has to be rescaled to /weight even if it has a positive value.

(this change only affects the scheduling of reniced tasks)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

round a tiny bit better in high-frequency rescheduling scenarios,
by rounding around zero instead of rounding down.

(this is pretty theoretical though)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

do small deltas in the weight and multiplication constant table so
that the worst-case numeric error is better than 1:100000000. (8 digits)

the current error table is:

     nice       mult *   inv_mult   error
     ------------------------------------------
     -20:      88761 *      48388  -0.0000000065
     -19:      71755 *      59856  -0.0000000037
     -18:      56483 *      76040   0.0000000056
     -17:      46273 *      92818   0.0000000042
     -16:      36291 *     118348  -0.0000000065
     -15:      29154 *     147320  -0.0000000037
     -14:      23254 *     184698  -0.0000000009
     -13:      18705 *     229616  -0.0000000037
     -12:      14949 *     287308  -0.0000000009
     -11:      11916 *     360437  -0.0000000009
     -10:       9548 *     449829  -0.0000000009
      -9:       7620 *     563644  -0.0000000037
      -8:       6100 *     704093   0.0000000009
      -7:       4904 *     875809   0.0000000093
      -6:       3906 *    1099582  -0.0000000009
      -5:       3121 *    1376151  -0.0000000058
      -4:       2501 *    1717300   0.0000000009
      -3:       1991 *    2157191  -0.0000000035
      -2:       1586 *    2708050   0.0000000009
      -1:       1277 *    3363326   0.0000000014
       0:       1024 *    4194304   0.0000000000
       1:        820 *    5237765   0.0000000009
       2:        655 *    6557202   0.0000000033
       3:        526 *    8165337  -0.0000000079
       4:        423 *   10153587   0.0000000012
       5:        335 *   12820798   0.0000000079
       6:        272 *   15790321   0.0000000037
       7:        215 *   19976592  -0.0000000037
       8:        172 *   24970740  -0.0000000037
       9:        137 *   31350126  -0.0000000079
      10:        110 *   39045157  -0.0000000061
      11:         87 *   49367440  -0.0000000037
      12:         70 *   61356676   0.0000000056
      13:         56 *   76695844  -0.0000000075
      14:         45 *   95443717  -0.0000000072
      15:         36 *  119304647  -0.0000000009
      16:         29 *  148102320  -0.0000000037
      17:         23 *  186737708  -0.0000000028
      18:         18 *  238609294  -0.0000000009
      19:         15 *  286331153  -0.0000000002
Signed-off-by: NIngo Molnar <mingo@elte.hu>

optimize update_rq_clock() calls in the load-balancer: update them
right after locking the runqueue(s) so that the pull functions do
not have to call it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>