- 30 12月, 2015 2 次提交
-
-
由 Heiko Carstens 提交于
Use CONFIG_TOPOLOGY which selects CONFIG_SCHED_* all over the place to reduce the random usage of the previous config options. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
s390 is always 64 bit. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 03 11月, 2015 1 次提交
-
-
由 Christian Borntraeger 提交于
Depending on the gcc version we can use builtin_bswap instead of architecture functions. Doing so is better than the inline assembly version of load reverse for two reasons: - the sequence of load reversed, apply constant mask, save reversed can be optimized to load, apply reversed mask, save - builtins are slightly better to optimize e.g. gcc instruction scheduler cannot optimize grouping on inline assemblies. To enable set we have to ARCH_USE_BUILTIN_BSWAP. bloat-o-meter results: add/remove: 1/1 grow/shrink: 75/533 up/down: 1711/-9394 (-7683) Suggested-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 10月, 2015 1 次提交
-
-
由 Martin Schwidefsky 提交于
Use bit 2**1 of the pte and bit 2**14 of the pmd for the soft dirty bit. The fault mechanism to do dirty tracking is already in place. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 06 10月, 2015 1 次提交
-
-
由 Gerald Schaefer 提交于
This adds an IOMMU API implementation for s390 PCI devices. Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
- 11 9月, 2015 1 次提交
-
-
由 Dave Young 提交于
There are two kexec load syscalls, kexec_load another and kexec_file_load. kexec_file_load has been splited as kernel/kexec_file.c. In this patch I split kexec_load syscall code to kernel/kexec.c. And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and use kexec_file_load only, or vice verse. The original requirement is from Ted Ts'o, he want kexec kernel signature being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use kexec_load syscall can bypass the checking. Vivek Goyal proposed to create a common kconfig option so user can compile in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects KEXEC_CORE so that old config files still work. Because there's general code need CONFIG_KEXEC_CORE, so I updated all the architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects KEXEC_CORE in arch Kconfig. Also updated general kernel code with to kexec_load syscall. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NDave Young <dyoung@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 8月, 2015 3 次提交
-
-
由 Philipp Hachtmann 提交于
Signed-off-by: NPhilipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
NUMA emulation (aka fake NUMA) distributes the available memory to nodes without using real topology information about the physical memory of the machine. Splitting the system memory into nodes replicates the memory management structures for each node. Particularly each node has its own "mm locks" and its own "kswapd" task. For large systems, under certain conditions, this results in improved system performance and/or latency based on reduced pressure on the mm locks and the kswapd tasks. NUMA emulation distributes CPUs to nodes while respecting the original machine topology information. This is done by trying to avoid to separate CPUs which reside on the same book or even on the same MC. Because the current Linux scheduler code requires a stable cpu to node mapping, cores are pinned to nodes when the first CPU thread is set online. This patch is based on the initial implementation from Philipp Hachtmann. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Philipp Hachtmann 提交于
Enable core NUMA support for s390 and add one simple default mode "plain" that creates one single NUMA node. This patch contains several changes from Michael Holzheu. Signed-off-by: NPhilipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 22 7月, 2015 1 次提交
-
-
由 Hendrik Brueckner 提交于
Add support for the generic CPU feature modalias implementation that wires up optional CPU features to udev-based module autoprobing. The <asm/cpufeature.h> file provides definitions to map CPU features to s390 ELF hardware capabilities. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 23 4月, 2015 1 次提交
-
-
由 Heiko Carstens 提交于
The new ebpf code uses e.g. the laal instruction which is part of the interlocked-access facility 1 which again was introduced with z196. So we must make sure the ebpf code generator depends on MARCH_Z196_FEATURES. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
- 16 4月, 2015 1 次提交
-
-
由 Iulia Manda 提交于
There are a lot of embedded systems that run most or all of their functionality in init, running as root:root. For these systems, supporting multiple users is not necessary. This patch adds a new symbol, CONFIG_MULTIUSER, that makes support for non-root users, non-root groups, and capabilities optional. It is enabled under CONFIG_EXPERT menu. When this symbol is not defined, UID and GID are zero in any possible case and processes always have all capabilities. The following syscalls are compiled out: setuid, setregid, setgid, setreuid, setresuid, getresuid, setresgid, getresgid, setgroups, getgroups, setfsuid, setfsgid, capget, capset. Also, groups.c is compiled out completely. In kernel/capability.c, capable function was moved in order to avoid adding two ifdef blocks. This change saves about 25 KB on a defconfig build. The most minimal kernels have total text sizes in the high hundreds of kB rather than low MB. (The 25k goes down a bit with allnoconfig, but not that much. The kernel was booted in Qemu. All the common functionalities work. Adding users/groups is not possible, failing with -ENOSYS. Bloat-o-meter output: add/remove: 7/87 grow/shrink: 19/397 up/down: 1675/-26325 (-24650) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NIulia Manda <iulia.manda21@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Tested-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 4月, 2015 3 次提交
-
-
由 Michael Holzheu 提交于
Replace 32 bit BPF JIT backend with new 64 bit eBPF backend. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Kees Cook 提交于
When an architecture fully supports randomizing the ELF load location, a per-arch mmap_rnd() function is used to find a randomized mmap base. In preparation for randomizing the location of ET_DYN binaries separately from mmap, this renames and exports these functions as arch_mmap_rnd(). Additionally introduces CONFIG_ARCH_HAS_ELF_RANDOMIZE for describing this feature on architectures that support it (which is a superset of ARCH_BINFMT_ELF_RANDOMIZE_PIE, since s390 already supports a separated ET_DYN ASLR from mmap ASLR without the ARCH_BINFMT_ELF_RANDOMIZE_PIE logic). Signed-off-by: NKees Cook <keescook@chromium.org> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: NIngo Molnar <mingo@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "David A. Long" <dave.long@linaro.org> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Arun Chandran <achandran@mvista.com> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Min-Hua Chen <orca.chen@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Vineeth Vijayan <vvijayan@mvista.com> Cc: Jeff Bailey <jeffbailey@google.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Behan Webster <behanw@converseincode.com> Cc: Ismael Ripoll <iripoll@upv.es> Cc: Jan-Simon Mller <dl9pf@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
We would want to use number of page table level to define mm_struct. Let's expose it as CONFIG_PGTABLE_LEVELS. Core mm expects __PAGETABLE_{PUD,PMD}_FOLDED to be defined if these page table levels folded. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 3月, 2015 1 次提交
-
-
由 Jiri Slaby 提交于
This is a trivial port from kGraft. Module relocations are not supported yet. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 25 3月, 2015 1 次提交
-
-
由 Heiko Carstens 提交于
Remove the 31 bit support in order to reduce maintenance cost and effectively remove dead code. Since a couple of years there is no distribution left that comes with a 31 bit kernel. The 31 bit kernel also has been broken since more than a year before anybody noticed. In addition I added a removal warning to the kernel shown at ipl for 5 minutes: a960062e ("s390: add 31 bit warning message") which let everybody know about the plan to remove 31 bit code. We didn't get any response. Given that the last 31 bit only machine was introduced in 1999 let's remove the code. Anybody with 31 bit user space code can still use the compat mode. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 30 1月, 2015 1 次提交
-
-
由 Heiko Carstens 提交于
With SMT we can have more than 256 CPUs. Let's make them available. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 29 1月, 2015 1 次提交
-
-
由 Heiko Carstens 提交于
Make use of gcc's hotpatch support to generate better code for ftrace function tracing. The generated code now contains only a six byte nop in each function prologue instead of a 24 byte code block which will be runtime patched to support function tracing. With the new code generation the runtime overhead for supporting function tracing is close to zero, while the original code did show a significant performance impact. Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 22 1月, 2015 2 次提交
-
-
由 Martin Schwidefsky 提交于
The multi-threading facility is introduced with the z13 processor family. This patch adds code to detect the multi-threading facility. With the facility enabled each core will surface multiple hardware threads to the system. Each hardware threads looks like a normal CPU to the operating system with all its registers and properties. The SCLP interface reports the SMT topology indirectly via the maximum thread id. Each reported CPU in the result of a read-scp-information is a core representing a number of hardware threads. To reflect the reduced CPU capacity if two hardware threads run on a single core the MT utilization counter set is used to normalize the raw cputime obtained by the CPU timer deltas. This scaled cputime is reported via the taskstats interface. The normal /proc/stat numbers are based on the raw cputime and are not affected by the normalization. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Allow to generate code that only runs on z13 machines. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 08 1月, 2015 1 次提交
-
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 12月, 2014 1 次提交
-
-
由 Riku Voipio 提交于
Following the suggestions from Andrew Morton and Stephen Rothwell, Dont expand the ARCH list in kernel/gcov/Kconfig. Instead, define a ARCH_HAS_GCOV_PROFILE_ALL bool which architectures can enable. set ARCH_HAS_GCOV_PROFILE_ALL on Architectures where it was previously allowed + ARM64 which I tested. Signed-off-by: NRiku Voipio <riku.voipio@linaro.org> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 10月, 2014 1 次提交
-
-
由 Heiko Carstens 提交于
31 bit and 64 bit diverge more and more and it is rather painful to keep both parts running. To make things simpler just remove the 31 bit support which nobody uses anyway. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 25 9月, 2014 1 次提交
-
-
由 Jan Willeke 提交于
Signed-off-by: NJan Willeke <willeke@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 09 9月, 2014 2 次提交
-
-
由 Heiko Carstens 提交于
We have too many combinations for function tracing. Lets simply stick to the most advanced option, so we don't have to care of other combinations. This means we always select DYNAMIC_FTRACE if FUNCTION_TRACER is selected. In the s390 Makefile also remove CONFIG_FTRACE_SYSCALLS since that functionality got moved to architecture independent code in the meantime. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
This code is based on a patch from Vojtech Pavlik. http://marc.info/?l=linux-s390&m=140438885114413&w=2 The actual implementation now differs significantly: Instead of adding a second function "ftrace_regs_caller" which would be nearly identical to the existing ftrace_caller function, the current ftrace_caller function is now an alias to ftrace_regs_caller and always passes the needed pt_regs structure and function_trace_op parameters unconditionally. Besides that also use asm offsets to correctly allocate and access the new struct pt_regs on the stack. While at it we can make use of new instruction to get rid of some indirect loads if compiled for new machines. The passed struct pt_regs can be changed by the called function and it's new contents will replace the current contents. Note: to change the return address the embedded psw member of the pt_regs structure must be changed. The psw member is right now incomplete, since the mask part is missing. For all current use cases this should be sufficent. Providing and restoring a sane mask would mean we need to add an epsw/lpswe pair to the mcount code. Only these two instruction would cost us ~120 cycles which currently seems not necessary. Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 30 8月, 2014 1 次提交
-
-
由 Vivek Goyal 提交于
New system call depends on crypto. As it did not have a separate config option, CONFIG_KEXEC was modified to select CRYPTO and CRYPTO_SHA256. But now previous patch introduced a new config option for new syscall. So CONFIG_KEXEC does not require crypto. Remove that dependency. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Shaun Ruffell <sruffell@digium.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 8月, 2014 1 次提交
-
-
由 Thierry Reding 提交于
The S390 architecture advertises support for HAVE_DMA_ATTRS when PCI is enabled. Patches to unify some of the DMA API would like to rely on the dma_alloc_attrs() and dma_free_attrs() functions to be provided when an architecture supports DMA attributes. Rename dma_alloc_coherent() and dma_free_coherent() to dma_alloc_attrs() and dma_free_attrs() since they are functionally equivalent and alias the former to the latter for compatibility. For consistency with other architectures, also reuse the existing symbol HAVE_DMA_ATTRS defined in arch/Kconfig instead of providing a duplicate. Select it when PCI is enabled. While at it, drop a redundant 'default n' from the PCI Kconfig symbol. Signed-off-by: NThierry Reding <treding@nvidia.com> Acked-By: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
-
- 09 8月, 2014 2 次提交
-
-
由 Vivek Goyal 提交于
Load purgatory code in RAM and relocate it based on the location. Relocation code has been inspired by module relocation code and purgatory relocation code in kexec-tools. Also compute the checksums of loaded kexec segments and store them in purgatory. Arch independent code provides this functionality so that arch dependent bootloaders can make use of it. Helper functions are provided to get/set symbol values in purgatory which are used by bootloaders later to set things like stack and entry point of second kernel etc. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Laura Abbott 提交于
Rather than have architectures #define ARCH_HAS_SG_CHAIN in an architecture specific scatterlist.h, make it a proper Kconfig option and use that instead. At same time, remove the header files are are now mostly useless and just include asm-generic/scatterlist.h. [sfr@canb.auug.org.au: powerpc files now need asm/dma.h] Signed-off-by: NLaura Abbott <lauraa@codeaurora.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc] Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 8月, 2014 1 次提交
-
-
由 Christian Borntraeger 提交于
commit 4badad35 (locking/mutex: Disable optimistic spinning on some architectures) fenced spinning for architectures without proper cmpxchg. There is no need to disable mutex spinning on s390, though: The instructions CS,CSG and friends provide the proper guarantees. (We dont implement cmpxchg with locks). Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 24 7月, 2014 1 次提交
-
-
由 John Stultz 提交于
The non-scalar ktime_t implementation is basically a timespec which has to be changed to support dates past 2038 on 32bit systems. This patch removes the non-scalar ktime_t implementation, forcing the scalar s64 nanosecond version on all architectures. This may have additional performance overhead on some 32bit systems when converting between ktime_t and timespec structures, however the majority of 32bit systems (arm and i386) were already using scalar ktime_t, so no performance regressions will be seen on those platforms. On affected platforms, I'm open to finding optimizations, including avoiding converting to timespecs where possible. [ tglx: We can now cleanup the ktime_t.tv64 mess, but thats a different issue and we can throw a coccinelle script at it ] Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
- 19 7月, 2014 1 次提交
-
-
由 Heiko Carstens 提交于
Remove check of obsolete variable function_trace_stop as requested by Steven Rostedt. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 20 5月, 2014 2 次提交
-
-
由 Michael Holzheu 提交于
Currently there are two s390 kernel dump config options "CONFIG_ZFCPDUMP" and "CONFIG_CRASH_DUMP". In order to keep things simple and because the "CONFIG_ZFCPDUMP" option already has a dependency to "CONFIG_CRASH_DUMP" remove the CONFIG_ZFCPDUMP option. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Reviewed-by: NEric Farman <farman@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Philipp Hachtmann 提交于
The original bootmem allocator is getting replaced by memblock. To cover the needs of the s390 kdump implementation the physical memory list is used. With this patch the bootmem allocator and its bitmaps are completely removed from s390. Signed-off-by: NPhilipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 08 4月, 2014 1 次提交
-
-
由 Uwe Kleine-König 提交于
If the renamed symbol is defined lib/iomap.c implements ioport_map and ioport_unmap and currently (nearly) all platforms define the port accessor functions outb/inb and friend unconditionally. So HAS_IOPORT_MAP is the better name for this. Consequently NO_IOPORT is renamed to NO_IOPORT_MAP. The motivation for this change is to reintroduce a symbol HAS_IOPORT that signals if outb/int et al are available. I will address that at least one merge window later though to keep surprises to a minimum and catch new introductions of (HAS|NO)_IOPORT. The changes in this commit were done using: $ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/' Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 3月, 2014 1 次提交
-
-
由 AKASHI Takahiro 提交于
Currently AUDITSYSCALL has a long list of architecture depencency: depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA) The purpose of this patch is to replace it with HAVE_ARCH_AUDITSYSCALL for simplicity. Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> (arm) Acked-by: Richard Guy Briggs <rgb@redhat.com> (audit) Acked-by: Matt Turner <mattst88@gmail.com> (alpha) Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: NEric Paris <eparis@redhat.com>
-
- 07 3月, 2014 1 次提交
-
-
由 Josh Triplett 提交于
The unconditionally built keyboard driver, drivers/s390/char/keyboard.c, requires CONFIG_TTY, so select it from CONFIG_S390 to prevent a build error. Signed-off-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 03 3月, 2014 1 次提交
-
-
由 Heiko Carstens 提交于
If an architecture has futex_atomic_cmpxchg_inatomic() implemented and there is no runtime check necessary, allow to skip the test within futex_init(). This allows to get rid of some code which would always give the same result, and also allows the compiler to optimize a couple of if statements away. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/20140302120947.GA3641@osirisSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-