Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These were supposed to be a bitwise operation but there is a typo.
The result is mostly harmless, but sparse correctly complains.

Fixes: 44a95dae ('KVM: x86: Detect and Initialize AVIC support')
Fixes: 18f40c53 ('svm: Add VMEXIT handlers for AVIC')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Neither APICv nor AVIC actually need the first argument of
hwapic_isr_update, but the vCPU makes more sense than passing the
pointer to the whole virtual machine!  In fact in the APICv case it's
just happening that the vCPU is used implicitly, through the loaded VMCS.

The second argument instead is named differently, make it consistent.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When a vcpu is loaded/unloaded to a physical core, we need to update
host physical APIC ID information in the Physical APIC-ID table
accordingly.

Also, when vCPU is blocking/un-blocking (due to halt instruction),
we need to make sure that the is-running bit in set accordingly in the
physical APIC-ID table.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
[Return void from new functions, add WARN_ON when they returned negative
 errno; split load and put into separate function as they have almost
 nothing in common. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When enable AVIC:
    * Do not intercept CR8 since this should be handled by AVIC HW.
    * Also, we don't need to sync cr8/V_TPR and APIC backing page.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[Rename svm_in_nested_interrupt_shadow to svm_nested_virtualize_tpr. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since AVIC only virtualizes xAPIC hardware for the guest, this patch
disable x2APIC support in guest CPUID.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Adding kvm_x86_ops hooks to allow APICv to do post state restore.
This is required to support VM save and restore feature.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch introduces VMEXIT handlers, avic_incomplete_ipi_interception()
and avic_unaccelerated_access_interception() along with two trace points
(trace_kvm_avic_incomplete_ipi and trace_kvm_avic_unaccelerated_access).
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch introduces a new mechanism to inject interrupt using AVIC.
Since VINTR is not supported when enable AVIC, we need to inject
interrupt via APIC backing page instead.

This patch also adds support for AVIC doorbell, which is used by
KVM to signal a running vcpu to check IRR for injected interrupts.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch introduces AVIC-related data structure, and AVIC
initialization code.

There are three main data structures for AVIC:
    * Virtual APIC (vAPIC) backing page (per-VCPU)
    * Physical APIC ID table (per-VM)
    * Logical APIC ID table (per-VM)

Currently, AVIC is disabled by default. Users can manually
enable AVIC via kernel boot option kvm-amd.avic=1 or during
kvm-amd module loading with parameter avic=1.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[Avoid extra indentation (Boris). - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Unlike ds and es, these are base addresses, not selectors.  Rename
them so their meaning is more obvious.

On x86_32, the field is still called fs.  Fixing that could make sense
as a future cleanup.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/69a18a51c4cba0ce29a241e570fc618ad721d908.1461698311.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Protection keys define a new 4-bit protection key field (PKEY) in bits
62:59 of leaf entries of the page tables, the PKEY is an index to PKRU
register(16 domains), every domain has 2 bits(write disable bit, access
disable bit).

Static logic has been produced in update_pkru_bitmask, dynamic logic need
read pkey from page table entries, get pkru value, and deduce the correct
result.

[ Huaitong: Xiao helps to modify many sections. ]
Signed-off-by: NHuaitong Han <huaitong.han@intel.com>
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pass the return code from kvm_emulate_hypercall on to the caller,
in order to allow it to indicate to the userspace that
the hypercall has to be handled there.

Also adjust all the existing code paths to return 1 to make sure the
hypercall isn't passed to the userspace without setting kvm_run
appropriately.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Invoking tracepoints within kvm_guest_enter/kvm_guest_exit causes a
lockdep splat.
Reported-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

RDTSCP was never supported for AMD CPUs, which nobody noticed because
Linux does not use it.  But exactly the fact that Linux does not
use it makes the implementation very simple; we can freely trash
MSR_TSC_AUX while running the guest.

Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The decision on whether to use hardware APIC virtualization used to be
taken globally, based on the availability of the feature in the CPU
and the value of a module parameter.

However, under certain circumstances we want to control it on per-vcpu
basis.  In particular, when the userspace activates HyperV synthetic
interrupt controller (SynIC), APICv has to be disabled as it's
incompatible with SynIC auto-EOI behavior.

To achieve that, introduce 'apicv_active' flag on struct
kvm_vcpu_arch, and kvm_vcpu_deactivate_apicv() function to turn APICv
off.  The flag is initialized based on the module parameter and CPU
capability, and consulted whenever an APICv-specific action is
performed.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The function to determine if the vector is handled by ioapic used to
rely on the fact that only ioapic-handled vectors were set up to
cause vmexits when virtual apic was in use.

We're going to break this assumption when introducing Hyper-V
synthetic interrupts: they may need to cause vmexits too.

To achieve that, introduce a new bitmap dedicated specifically for
ioapic-handled vectors, and populate EOI exit bitmap from it for now.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The kernel accesses IC_CFG MSR (0xc0011021) on AMD because it
checks whether the way access filter is enabled on some F15h
models, and, if so, disables it.

kvm doesn't handle that MSR access and complains about it, which
can get really noisy in dmesg when one starts kvm guests all the
time for testing. And it is useless anyway - guest kernel
shouldn't be doing such changes anyway so tell it that that
filter is disabled.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1448273546-2567-4-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Because #DB is now intercepted unconditionally, this callback
only operates on #BP for both VMX and SVM.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is needed to avoid the possibility that the guest triggers
an infinite stream of #DB exceptions (CVE-2015-8104).

VMX is not affected: because it does not save DR6 in the VMCS,
it already intercepts #DB unconditionally.
Reported-by: NJan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It was found that a guest can DoS a host by triggering an infinite
stream of "alignment check" (#AC) exceptions.  This causes the
microcode to enter an infinite loop where the core never receives
another interrupt.  The host kernel panics pretty quickly due to the
effects (CVE-2015-5307).
Signed-off-by: NEric Northup <digitaleric@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Both VMX and SVM scales the host TSC in the same way in call-back
read_l1_tsc(), so this patch moves the scaling logic from call-back
read_l1_tsc() to a common function kvm_read_l1_tsc().
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

For both VMX and SVM, if the 2nd argument of call-back
adjust_tsc_offset() is the host TSC, then adjust_tsc_offset() will scale
it first. This patch moves this common TSC scaling logic to its caller
adjust_tsc_offset_host() and rename the call-back adjust_tsc_offset() to
adjust_tsc_offset_guest().
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Both VMX and SVM calculate the tsc-offset in the same way, so this
patch removes the call-back compute_tsc_offset() and replaces it with a
common function kvm_compute_tsc_offset().
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Both VMX and SVM propagate virtual_tsc_khz in the same way, so this
patch removes the call-back set_tsc_khz() and replaces it with a common
function.
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

VMX and SVM calculate the TSC scaling ratio in a similar logic, so this
patch generalizes it to a common TSC scaling function.
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
[Inline the multiplication and shift steps into mul_u64_u64_shr.  Remove
 BUG_ON.  - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch moves the field of TSC scaling ratio from the architecture
struct vcpu_svm to the common struct kvm_vcpu_arch.
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The number of bits of the fractional part of the 64-bit TSC scaling
ratio in VMX and SVM is different. This patch makes the architecture
code to collect the number of fractional bits and other related
information into variables that can be accessed in the common code.
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Not zeroing EFER means that a 32-bit firmware cannot enter paging mode
without clearing EFER.LME first (which it should not know about).
Yang Zhang from Intel confirmed that the manual is wrong and EFER is
cleared to zero on INIT.

Fixes: d28bc9dd
Cc: stable@vger.kernel.org
Cc: Yang Z Zhang <yang.z.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently we always write the next_rip of the shadow vmcb to
the guests vmcb when we emulate a vmexit. This could confuse
the guest when its cpuid indicated no support for the
next_rip feature.

Fix this by only propagating next_rip if the guest actually
supports it.

Cc: Bandan Das <bsd@redhat.com>
Cc: Dirk Mueller <dmueller@suse.com>
Tested-By: NDirk Mueller <dmueller@suse.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The interrupt window is currently checked twice, once in vmx.c/svm.c and
once in dm_request_for_irq_injection.  The only difference is the extra
check for kvm_arch_interrupt_allowed in dm_request_for_irq_injection,
and the different return value (EINTR/KVM_EXIT_INTR for vmx.c/svm.c vs.
0/KVM_EXIT_IRQ_WINDOW_OPEN for dm_request_for_irq_injection).

However, dm_request_for_irq_injection is basically dead code!  Revive it
by removing the checks in vmx.c and svm.c's vmexit handlers, and
fixing the returned values for the dm_request_for_irq_injection case.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Avoid pointer chasing and memory barriers, and simplify the code
when split irqchip (LAPIC in kernel, IOAPIC/PIC in userspace)
is introduced.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This will avoid an unnecessary trip to ->kvm and from there to the VPIC.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We can reuse the algorithm that computes the EOI exit bitmap to figure
out which vectors are handled by the IOAPIC.  The only difference
between the two is for edge-triggered interrupts other than IRQ8
that have no notifiers active; however, the IOAPIC does not have to
do anything special for these interrupts anyway.

This again limits the interactions between the IOAPIC and the LAPIC,
making it easier to move the former to userspace.

Inspired by a patch from Steve Rutherford.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The cpu feature flags are not ever going to change, so warning
everytime can cause a lot of kernel log spam
(in our case more than 10GB/hour).

The warning seems to only occur when nested virtualization is
enabled, so it's probably triggered by a KVM bug.  This is a
sensible and safe change anyway, and the KVM bug fix might not
be suitable for stable releases anyway.

Cc: stable@vger.kernel.org
Signed-off-by: NDirk Mueller <dmueller@suse.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This reverts commit 3c2e7f7d.
Initializing the mapping from MTRR to PAT values was reported to
fail nondeterministically, and it also caused extremely slow boot
(due to caching getting disabled---bug 103321) with assigned devices.
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: NSebastian Schuette <dracon@ewetel.net>
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This reverts commit 54928303.
It builds on the commit that is being reverted next.

Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This reverts commit e098223b,
which has a dependency on other commits being reverted.

Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This reverts commit fd717f11.
It was reported to cause Machine Check Exceptions (bug 104091).

Reported-by: harn-solo@gmx.de
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm_set_cr0 may want to call kvm_zap_gfn_range and thus access the
memslots array (SRCU protected).  Using a mini SRCU critical section
is ugly, and adding it to kvm_arch_vcpu_create doesn't work because
the VMX vcpu_create callback calls synchronize_srcu.

Fixes this lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
4.3.0-rc1+ #1 Not tainted
-------------------------------
include/linux/kvm_host.h:488 suspicious rcu_dereference_check() usage!

other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
1 lock held by qemu-system-i38/17000:
 #0:  (&(&kvm->mmu_lock)->rlock){+.+...}, at: kvm_zap_gfn_range+0x24/0x1a0 [kvm]

[...]
Call Trace:
 dump_stack+0x4e/0x84
 lockdep_rcu_suspicious+0xfd/0x130
 kvm_zap_gfn_range+0x188/0x1a0 [kvm]
 kvm_set_cr0+0xde/0x1e0 [kvm]
 init_vmcb+0x760/0xad0 [kvm_amd]
 svm_create_vcpu+0x197/0x250 [kvm_amd]
 kvm_arch_vcpu_create+0x47/0x70 [kvm]
 kvm_vm_ioctl+0x302/0x7e0 [kvm]
 ? __lock_is_held+0x51/0x70
 ? __fget+0x101/0x210
 do_vfs_ioctl+0x2f4/0x560
 ? __fget_light+0x29/0x90
 SyS_ioctl+0x4c/0x90
 entry_SYSCALL_64_fastpath+0x16/0x73
Reported-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>