On Intel Galileo Gen2 the GPIO expanders are connected to the i2c bus. For
those devices the ACPI table has specific parameters that refer to an actual
i2c host controller. Since MFD now copes with that specific configuration we
have to provide a necessary information how to distinguish devices in ACPI
namespace. Here the _ADR values are provided.
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

On Intel Galileo boards the GPIO expander is connected to i2c bus. Moreover it
is able to generate interrupt, but interrupt line is connected to GPIO. That's
why we have to have GPIO driver in place when we will probe i2c host with
device connected to it.
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

There is at least one board on the market, i.e. Intel Galileo Gen2, that uses
_ADR to distinguish the devices under one actual device. Due to this we have to
improve the quirk in the MFD core to handle that board.
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

When configuring the interrupt mapping for a new device, we
iterate over all the possible aliases to account for their
maximum MSI allocation. This was introduced by e8137f4f
("irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration").

Turns out that the code doing that is a bit braindead, and repeatedly
accounts for the same device over and over.

Fix this by counting the actual alias that is passed to us by the
core code.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1443800646-8074-3-git-send-email-marc.zyngier@arm.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

More agressive inlining in recent versions of GCC have uncovered
a new set of warnings:

 drivers/irqchip/irq-gic-v3-its.c: In function its_msi_prepare:
  drivers/irqchip/irq-gic-v3-its.c:1148:26: warning: lpi_base may be used
    uninitialized in this function [-Wmaybe-uninitialized]
     dev->event_map.lpi_base = lpi_base;
                          ^
 drivers/irqchip/irq-gic-v3-its.c:1116:6: note: lpi_base was declared here
  int lpi_base;
	      ^
 drivers/irqchip/irq-gic-v3-its.c:1149:25: warning: nr_lpis may be used
  uninitialized in this function [-Wmaybe-uninitialized]
   dev->event_map.nr_lpis = nr_lpis;
	                         ^
 drivers/irqchip/irq-gic-v3-its.c:1117:6: note: nr_lpis was declared here
  int nr_lpis;
	      ^
The warning is fairly benign (there is no code path that could
actually use uninitialized variables), but let's silence it anyway
by zeroing the variables on the error path.
Reported-by: NAlex Shi <alex.shi@linaro.org>
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1443800646-8074-2-git-send-email-marc.zyngier@arm.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This reverts commit e51e3849: we
actually do want the device to work in extended W mode, as this is the
mode that allows us receiving multiple contact information.

Cc: stable@vger.kernel.org

Passing -1 to bitmap_storage_alloc() causes page->index to be set to
-1, which is quite problematic.

So only pass ->cluster_slot if mddev_is_clustered().

Fixes: b97e9257 ("Use separate bitmaps for each nodes in the cluster")
Cc: stable@vger.kernel.org (v4.1+)
Signed-off-by: NNeilBrown <neilb@suse.com>

close_sync() needs to set conf->next_resync to a large, but safe value
below MaxSector and use it to determine whether or not to set
start_next_window in wait_barrier()

Solution suggested by Neil Brown.
Reported-by: NNate Dailey <nate.dailey@stratus.com>
Tested-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.com>

Remove unneeded NULL test.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@ expression x; @@
-if (x != NULL)
  \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NNeilBrown <neilb@suse.com>

If faulty disks of an array are more than allowed degraded number, the
array enters error handling. It will be marked as read-only with
MD_CHANGE_PENDING/RECOVERY_NEEDED set. But currently recovery doesn't
clear CHANGE_PENDING bit for read-only array.  If MD_CHANGE_PENDING is
set for a raid5 array, all returned IO will be hold on a list till the
bit is clear. But recovery nevery clears this bit, the IO is always in
pending state and nevery finish. This has bad effects like upper layer
can't get an IO error and the array can't be stopped.

Fixes: c3cce6cd ("md/raid5: ensure device failure recorded before write request returns.")
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NNeilBrown <neilb@suse.com>

Calling e.g. blk_queue_max_hw_sectors() after calls to
disk_stack_limits() discards the settings determined by
disk_stack_limits().
So we need to make those calls first.

Fixes: 199dc6ed ("md/raid0: update queue parameter in a safer location.")
Cc: stable@vger.kernel.org (v2.6.35+ - please apply with 199dc6ed).
Reported-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.com>

When need_this_block probably shouldn't be called when there
are more than 2 failed devices, we really don't want it to try
indexing beyond the end of the failed_num[] of fdev[] arrays.

So limit the loops to at most 2 iterations.
Reported-by: NShaohua Li <shli@fb.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

handle_failed_stripe() makes the stripe fail, eg, all IO will return
with a failure, but it doesn't update stripe_head_state. Later
handle_stripe() has special handling for raid6 for handle_stripe_fill().
That check before handle_stripe_fill() doesn't skip the failed stripe
and we get a kernel crash in need_this_block.  This patch clear the
analysis state to make sure no functions wrongly called after
handle_failed_stripe()
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NNeilBrown <neilb@suse.com>

If a superblock update is pending, wait for it to complete before
letting md_set_readonly() switch to readonly.
Otherwise we might lose important information about a device having
failed.

For external arrays, waiting for superblock updates can wait on
user-space, so in that case, just return an error.
Reported-and-tested-by: NShaohua Li <shli@fb.com>
Signed-off-by: NNeilBrown <neilb@suse.com>

This just removes the magic number.
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Since 9eb1e57f
drm/dp/mst: make sure mst_primary mstb is valid in work function

we validate the mstb structs in the work function, and doing
that takes a reference. So we should never get here with the
work function running using the mstb device, only if the work
function hasn't run yet or is running for another mstb.

So we don't need to sync the work here, this was causing
lockdep spew as below.

[  +0.000160] =============================================
[  +0.000001] [ INFO: possible recursive locking detected ]
[  +0.000002] 3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1 Tainted: G        W      ------------
[  +0.000001] ---------------------------------------------
[  +0.000001] kworker/4:2/1262 is trying to acquire lock:
[  +0.000001]  ((&mgr->work)){+.+.+.}, at: [<ffffffff810b29a5>] flush_work+0x5/0x2e0
[  +0.000007]
but task is already holding lock:
[  +0.000001]  ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710
[  +0.000004]
other info that might help us debug this:
[  +0.000001]  Possible unsafe locking scenario:

[  +0.000002]        CPU0
[  +0.000000]        ----
[  +0.000001]   lock((&mgr->work));
[  +0.000002]   lock((&mgr->work));
[  +0.000001]
 *** DEADLOCK ***

[  +0.000001]  May be due to missing lock nesting notation

[  +0.000002] 2 locks held by kworker/4:2/1262:
[  +0.000001]  #0:  (events_long){.+.+.+}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710
[  +0.000004]  #1:  ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710
[  +0.000003]
stack backtrace:
[  +0.000003] CPU: 4 PID: 1262 Comm: kworker/4:2 Tainted: G        W      ------------   3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1
[  +0.000001] Hardware name: LENOVO 20EGS0R600/20EGS0R600, BIOS GNET71WW (2.19 ) 02/05/2015
[  +0.000008] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
[  +0.000001]  ffffffff82c26c90 00000000a527b914 ffff88046399bae8 ffffffff816fe04d
[  +0.000004]  ffff88046399bb58 ffffffff8110f47f ffff880461438000 0001009b840fc003
[  +0.000002]  ffff880461438a98 0000000000000000 0000000804dc26e1 ffffffff824a2c00
[  +0.000003] Call Trace:
[  +0.000004]  [<ffffffff816fe04d>] dump_stack+0x19/0x1b
[  +0.000004]  [<ffffffff8110f47f>] __lock_acquire+0x115f/0x1250
[  +0.000002]  [<ffffffff8110fd49>] lock_acquire+0x99/0x1e0
[  +0.000002]  [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0
[  +0.000002]  [<ffffffff810b29ee>] flush_work+0x4e/0x2e0
[  +0.000002]  [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0
[  +0.000004]  [<ffffffff81025905>] ? native_sched_clock+0x35/0x80
[  +0.000002]  [<ffffffff81025959>] ? sched_clock+0x9/0x10
[  +0.000002]  [<ffffffff810da1f5>] ? local_clock+0x25/0x30
[  +0.000002]  [<ffffffff8110dca9>] ? mark_held_locks+0xb9/0x140
[  +0.000003]  [<ffffffff810b4ed5>] ? __cancel_work_timer+0x95/0x160
[  +0.000002]  [<ffffffff810b4ee8>] __cancel_work_timer+0xa8/0x160
[  +0.000002]  [<ffffffff810b4fb0>] cancel_work_sync+0x10/0x20
[  +0.000007]  [<ffffffffa0160d17>] drm_dp_destroy_mst_branch_device+0x27/0x120 [drm_kms_helper]
[  +0.000006]  [<ffffffffa0163968>] drm_dp_mst_link_probe_work+0x78/0xa0 [drm_kms_helper]
[  +0.000002]  [<ffffffff810b5850>] process_one_work+0x220/0x710
[  +0.000002]  [<ffffffff810b57e4>] ? process_one_work+0x1b4/0x710
[  +0.000005]  [<ffffffff810b5e5b>] worker_thread+0x11b/0x3a0
[  +0.000003]  [<ffffffff810b5d40>] ? process_one_work+0x710/0x710
[  +0.000002]  [<ffffffff810beced>] kthread+0xed/0x100
[  +0.000003]  [<ffffffff810bec00>] ? insert_kthread_work+0x80/0x80
[  +0.000003]  [<ffffffff817121d8>] ret_from_fork+0x58/0x90

v2: add flush_work.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

In order to cache the EDID properly for tiled displays, we
need to retrieve it before we register the connector with
userspace, otherwise userspace can call get resources
and try and get the edid before we've even cached it.

This fixes some problems when hotplugging mst monitors,
with X/mutter running. As mutter seems to get 0 modes
for one of the monitors in the tile.

v2: fix warning in radeon
handle tile setting in cached path rather than
get edid path.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Update the state before sending the msg to close it.

v2: reset value if return indicates we haven't send the msg.
v3: just clean the code up.
Pointed out by Adam J Richter on

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91481Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

output ports should always have a connector, unless
in the rare case connector allocation fails in the
driver.

In this case we only need to teardown the pdt,
and free the struct, and there is no need to
send a hotplug msg.

In the case were we add the port to the destroy
list we need to send a hotplug if we destroy
any connectors, so userspace knows to reprobe
stuff.

this patch also handles port->connector allocation
failing which should be a rare event, but makes
the code consistent.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is unnecessary and it makes it easier to see what is needed
from port.

also add blank line to make things nicer.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

It was just a wrapper around drm_fb_helper_set_par that
called cursor_set2 in addition.  Now that the core handles
this, drop this radeon specific version.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If a driver uses the cursor_set2 crtc callback rather than
cursor_set, use that.  This fixes the fbdev helper for drivers
that use cursor_set2.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

During boot I get a div by zero Oops regression starting in v4.3-rc3.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NJavi Merino <javi.merino@arm.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in
vmlinux.

Cc: Fengguang Wu <fengguang.wu@gmail.com>
Cc: yalin wang <yalin.wang2010@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The new Properties Table feature introduced in UEFIv2.5 may
split memory regions that cover PE/COFF memory images into
separate code and data regions. Since these regions only differ
in the type (runtime code vs runtime data) and the permission
bits, but not in the memory type attributes (UC/WC/WT/WB), the
spec does not require them to be aligned to 64 KB.

Since the relative offset of PE/COFF .text and .data segments
cannot be changed on the fly, this means that we can no longer
pad out those regions to be mappable using 64 KB pages.
Unfortunately, there is no annotation in the UEFI memory map
that identifies data regions that were split off from a code
region, so we must apply this logic to all adjacent runtime
regions whose attributes only differ in the permission bits.

So instead of rounding each memory region to 64 KB alignment at
both ends, only round down regions that are not directly
preceded by another runtime region with the same type
attributes. Since the UEFI spec does not mandate that the memory
map be sorted, this means we also need to sort it first.

Note that this change will result in all EFI_MEMORY_RUNTIME
regions whose start addresses are not aligned to the OS page
size to be mapped with executable permissions (i.e., on kernels
compiled with 64 KB pages). However, since these mappings are
only active during the time that UEFI Runtime Services are being
invoked, the window for abuse is rather small.
Tested-by: NMark Salter <msalter@redhat.com>
Tested-by: Mark Rutland <mark.rutland@arm.com> [UEFI 2.4 only]
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Reviewed-by: NMark Salter <msalter@redhat.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1443218539-7610-3-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>

blk_mq_complete_request may be a no-op if the request has already
been completed by others means (e.g. a timeout or cancellation), but
currently drivers have to set rq->errors before calling
blk_mq_complete_request, which might leave us with the wrong error value.

Add an error parameter to blk_mq_complete_request so that we can
defer setting rq->errors until we known we won the race to complete the
request.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The exynos_drm_gem_mmap_buffer() is not used outside so make it static.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

fimd_dp_clock_enable() was setting the always to enabled,
this patch fix this to actually use the value that is set to 'val'.
Reported-by: NEmilio López <emilio.lopez@collabora.co.uk>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch removes unnecessary pm suspend/resume functions.

All kms sub drivers will be controlled by top of Exynos drm driver
and connector dpms so these sub drivers shouldn't have their own
pm interfaces.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

When disabling/enabling a crtc the primary area must be updated
independently of which crtc has been disabled/enabled.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1264735Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

A very tiny temporal window exists in the residue calculation where :
 - upon entering residue calculation, the transfer is ongoing
 - when reading the current transfer pointer, it just changed to
   the "finisher/linker" descriptor

In this case, the residue returned is the whole transfer length instead
of 0. Fix it.

This appears almost in one extreme case, where the driver is used
by older clients which inquire for residue in interrupt context, such
as the smsc91x ethernet driver, in a tight loop :
  interrupt_handler()
    dmaengine_submit()
    do {
      dmaengine_tx_status()
    } while (residue > 0 || status != DMA_ERROR)
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

A very small number of devices don't use the flow control offered by
requestor lines. In these specific cases, the pxa dma driver should be
aware of that and not try to use a requestor line.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The valid pchan range is 0 ~ d->dma_requests - 1.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Reviewed-by: NJun Nie <jun.nie@linaro.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

When putting back a descriptor to the free descs list, some fields are
not set to 0, it can cause bugs if someone uses it without having this
in mind.
Descriptor are not put back one by one so it is easier to clean
descriptors when we request them.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Cc: stable@vger.kernel.org #4.2
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The addressing mode we were using was not only incrementing the address at
each microblock, but also at each data boundary, which was severely slowing
the transfer, without any benefit since we were not using the data stride.

Switch to the micro block increment only in order to get back to an
acceptable performance level.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Fixes: 6007ccb5 ("dmaengine: xdmac: Add interleaved transfer support")
Cc: stable@vger.kernel.org #4.2
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Port of radeon commit 9b7d786b.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

It was added for completeness, but we don't have any users
for it yet.  Daniel noted that it may be racy. Remove it.

Change-Id: I5f5546f8911a4f294008a62dc86a73f3face38d1
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm_kms_helper_poll_enable() is called from a context in
intel_hpd_irq_storm_disable() where the the mode_config mutex is
already locked.
When this function was converted to lock this mutex in
commit 8c4ccc4a ("drm/probe-helper: Grab mode_config.mutex
in poll_init/enable") a deadlock occurred.
Call the newly implemented non-locking version of this function.

Changes since v1:
- use function name suffix '_locked' for the function that
  is to be called from a locked context.
Signed-off-by: NEgbert Eich <eich@suse.de>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

drm_kms_helper_poll_enable() was converted to lock the mode_config
mutex in commit 8c4ccc4a
("drm/probe-helper: Grab mode_config.mutex in poll_init/enable").

This disregarded the cases where this function is called from a context
where this mutex is already locked.

Add a non-locking version as well.

Changes since v1:
- use function name suffix '_locked' for the function that
  is to be called from a locked context.
Signed-off-by: NEgbert Eich <eich@suse.de>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

When get a CRC error, start the mmc_retune, it will issue CMD19/CMD21
to do tune, assume there were 10 clock phase need to try, phase 0 to
phase 6 is ok, phase 7 to phase 9 is NG, we try it from 0 to 9, so
the last CMD19/CMD21 will get CRC error, host->need_retune was set and
cause mmc_retune was called, then dead loop of mmc_retune
Signed-off-by: NChaotian Jing <chaotian.jing@mediatek.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Fixes: bd11e8bd ("mmc: core: Flag re-tuning is needed on CRC errors")
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>