提交 · 91707b8b27a785c42949ba55b65f084027962afa · openanolis / cloud-kernel

22 3月, 2011 40 次提交

[media] s5p-fimc: Fix G_FMT ioctl handler · 91707b8b

由 Sylwester Nawrocki 提交于 1月 15, 2011

Use pix_mp member of struct v4l2_format to return a format
description rather than pix. Also fill in the plane_fmt array.
This is a missing bit of conversion to the multiplanar API.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

91707b8b

[media] s5p-fimc: Use dynamic debug · 1e004695

由 Sylwester Nawrocki 提交于 2月 23, 2011

Use pr_debug instead of printk so it is possible to control
debug traces at runtime.
E.g. to enable debug trace in file fimc-core.c use command:
echo -n 'file fimc-core.c +p' > /sys/kernel/debug/dynamic_debug/control
or
echo -n 'file fimc-core.c -p' > /sys/kernel/debug/dynamic_debug/control
to disable.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

1e004695

[media] s5p-fimc: Add a platform data entry for MIPI-CSI data alignment · e0eec9af

由 Sylwester Nawrocki 提交于 2月 21, 2011

Allow the MIPI-CSI data alignment to be defined in the board setup
as it may be different across various camera sensors.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

e0eec9af

[media] s5p-fimc: Allow defining number of sensors at runtime · 117182d1

由 Sylwester Nawrocki 提交于 2月 28, 2011

Add num_clients field to struct s5p_fimc_isp_info to define exactly
size of clients array which simplifies a bit the sensors management.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

117182d1

[media] s5p-fimc: Prevent hanging on device close and fix the locking · 4ecbf5d1

由 Sylwester Nawrocki 提交于 2月 23, 2011

Rework the locking in m2m driver to assure proper operation on SMP systems.

When job_abort or stop_streaming was called to immediately shutdown
a memory-to-memory transaction video buffers scheduled for processing
were never returned to vb2 and v4l2_m2m_job_finish was not called
which led to hanging.

Correct this and also return the unprocessed buffers to vb2 marking
them as erroneous, in case the end of frame interrupt do not occur.
Reported-by: NSewoon Park <seuni.park@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

4ecbf5d1

[media] s5p-fimc: Prevent oops when i2c adapter is not available · a0f8caef

由 Sylwester Nawrocki 提交于 2月 11, 2011

Prevent invalid pointer dereference on error path.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

a0f8caef

[media] s5p-fimc: fix ISR and buffer handling for fimc-capture · 8ec737ff

由 Sungchun Kang 提交于 2月 07, 2011

In some cases fimc H/W did not stop although there were no output
buffers available. So the capture deactivation interrupt routine
is modified and the state of ST_CAPT_RUN is cleared only
in the LAST-IRQ call.

After LAST-IRQ is generated, H/W pointer will be skipped by 1 frame.
(reference by user manual) So, S/W pointer should be increased too.

Reviewed-by Jonghun Han <jonghun.han@samsung.com>
Signed-off-by: NSungchun Kang <sungchun.kang@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

8ec737ff

[media] Force xc5000 firmware loading for NetUP Dual DVB-T/C CI RF card · 4174ebf5

由 Abylay Ospan 提交于 1月 02, 2011

Two xc5000 tuners connected to same i2c bus.
Experiments shows that situation when one tuner is not initialized
while other is tuned to channel causes TS errors.
Signed-off-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

4174ebf5

[media] Fix CI code for NetUP Dual DVB-T/C CI RF card · 8af81ddb

由 Abylay Ospan 提交于 1月 02, 2011

CI reset takes several seconds on some CAM,
so there is no need to lock mutex all that time.
Also we need not to preserve CI's reset bits in
CIBUSCTRL register, they are handled automatically by FPGA.
Set it to 0 explicitly in order to not reset wrong CAM.
Signed-off-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

8af81ddb

[media] stv0367: implement uncorrected blocks counter · 78db66e5

由 Abylay Ospan 提交于 1月 02, 2011

Signed-off-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

78db66e5

A
[media] stv0367: change default value for AGC register · 01a475df
由 Abylay Ospan 提交于 1月 02, 2011
```
Signed-off-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
```
01a475df

[media] cx23885: Altera FPGA CI interface reworked · d164460f

由 Abylay Ospan 提交于 1月 02, 2011

It decreases I2C traffic.
Signed-off-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NIgor M. Liplianin <liplianin@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

d164460f

[media] cpia2: Fix some gcc 4.6 warnings when debug is disabled · 10397523

由 Mauro Carvalho Chehab 提交于 3月 11, 2011

cpia2_core.c:529:14: warning: variable 'dir' set but not used [-Wunused-but-set-variable]
cpia2_core.c:526:5: warning: variable 'block_index' set but not used [-Wunused-but-set-variable]
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

10397523

[media] several drivers: Fix a few gcc 4.6 warnings · 972d724c

由 Mauro Carvalho Chehab 提交于 3月 11, 2011

au0828-dvb.c:99:6: warning: variable 'ptr' set but not used [-Wunused-but-set-variable]
au0828-video.c:1180:25: warning: variable 'maxheight' set but not used [-Wunused-but-set-variable]
au0828-video.c:1180:15: warning: variable 'maxwidth' set but not used [-Wunused-but-set-variable]
bttv-input.c:196:16: warning: variable 'current_jiffies' set but not used [-Wunused-but-set-variable]

Those variables are not used at all, so just remove them.

Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

972d724c

[media] altera-ci.h: add missing inline · fa9448d9