- 12 12月, 2017 9 次提交
-
-
由 Xin Long 提交于
enqueue_event is added as a member of sctp_stream_interleave, used to enqueue either data, idata or notification events into user socket rx queue. It replaces sctp_ulpq_tail_event used in the other places with enqueue_event. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
ulpevent_data is added as a member of sctp_stream_interleave, used to do the most process in ulpq, including to convert data or idata chunk to event, reasm them in reasm queue and put them in lobby queue in right order, and deliver them up to user sk rx queue. This procedure is described in section 2.2.3 of RFC8260. It adds most functions for idata here to do the similar process as the old functions for data. But since the details are very different between them, the old functions can not be reused for idata. event->ssn and event->ppid settings are moved to ulpevent_data from sctp_ulpevent_make_rcvmsg, so that sctp_ulpevent_make_rcvmsg could work for both data and idata. Note that mid is added in sctp_ulpevent for idata, __packed has to be used for defining sctp_ulpevent, or it would exceeds the skb cb that saves a sctp_ulpevent variable for ulp layer process. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
validate_data is added as a member of sctp_stream_interleave, used to validate ssn/chunk type for data or mid (message id)/chunk type for idata, called in sctp_eat_data. If this check fails, an abort packet will be sent, as said in section 2.2.3 of RFC8260. It also adds the process for idata in rx path. As Marcelo pointed out, there's no need to add event table for idata, but just share chunk_event_table with data's. It would drop data chunk for idata and drop idata chunk for data by calling validate_data in sctp_eat_data. As last patch did, it also replaces sizeof(struct sctp_data_chunk) with sctp_datachk_len for rx path. After this patch, the idata can be accepted and delivered to ulp layer. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
assign_number is added as a member of sctp_stream_interleave, used to assign ssn for data or mid (message id) for idata, called in sctp_packet_append_data. sctp_chunk_assign_ssn is left as it is, and sctp_chunk_assign_mid is added for sctp_stream_interleave_1. This procedure is described in section 2.2.2 of RFC8260. All sizeof(struct sctp_data_chunk) in tx path is replaced with sctp_datachk_len, to make it right for idata as well. And also adjust sctp_chunk_is_data for SCTP_CID_I_DATA. After this patch, idata can be built and sent in tx path. Note that if sp strm_interleave is set, it has to wait_connect in sctp_sendmsg, as asoc intl_enable need to be known after 4 shake- hands, to decide if it should use data or idata later. data and idata can't be mixed to send in one asoc. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
To avoid hundreds of checks for the different process on I-DATA chunk, struct sctp_stream_interleave is defined as a group of functions used to replace the codes in some place where it needs to do different job according to if the asoc intl_enabled is set. With these ops, it only needs to initialize asoc->stream.si with sctp_stream_interleave_0 for normal data if asoc intl_enable is 0, or sctp_stream_interleave_1 for idata if asoc intl_enable is set in sctp_stream_init. After that, the members in asoc->stream.si can be used directly in some special places without checking asoc intl_enable. make_datafrag is the first member for sctp_stream_interleave, it's used to make data or idata frags, called in sctp_datamsg_from_user. The old function sctp_make_datafrag_empty needs to be adjust some to fit in this ops. Note that as idata and data chunks have different length, it also defines data_chunk_len for sctp_stream_interleave to describe the chunk size. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
sctp_idatahdr and sctp_idata_chunk are used to define and parse I-DATA chunk format, and sctp_make_idata is a function to build the chunk. The I-DATA Chunk Format is defined in section 2.1 of RFC8260. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
asoc intl_enable will be set when local sp strm_interleave is set and there's I-DATA chunk in init and init_ack extensions, as said in section 2.2.1 of RFC8260. asoc intl_enable indicates all data will be sent as I-DATA chunks. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch adds intl_enable in asoc and netns, and strm_interleave in sctp_sock to indicate if stream interleave is enabled and supported. netns intl_enable would be set via procfs, but that is not added yet until all stream interleave codes are completely implemented; asoc intl_enable will be set when doing 4-shakehands. sp strm_interleave can be set by sockopt SCTP_INTERLEAVING_SUPPORTED which is also added in this patch. This socket option is defined in section 4.3.1 of RFC8260. Note that strm_interleave can only be set by sockopt when both netns intl_enable and sp frag_interleave are set. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mahesh Bandewar 提交于
Packets that don't have dest mac as the mac of the master device should not be entertained by the IPvlan rx-handler. This is mostly true as the packet path mostly takes care of that, except when the master device is a virtual device. As demonstrated in the following case - ip netns add ns1 ip link add ve1 type veth peer name ve2 ip link add link ve2 name iv1 type ipvlan mode l2 ip link set dev iv1 netns ns1 ip link set ve1 up ip link set ve2 up ip -n ns1 link set iv1 up ip addr add 192.168.10.1/24 dev ve1 ip -n ns1 addr 192.168.10.2/24 dev iv1 ping -c2 192.168.10.2 <Works!> ip neigh show dev ve1 ip neigh show 192.168.10.2 lladdr <random> dev ve1 ping -c2 192.168.10.2 <Still works! Wrong!!> This patch adds that missing check in the IPvlan rx-handler. Reported-by: NAmit Sikka <amit.sikka@ericsson.com> Signed-off-by: NMahesh Bandewar <maheshb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 12月, 2017 9 次提交
-
-
由 Cong Wang 提交于
Both netlink_add_tap() and netlink_remove_tap() are called in process context, no need to bother spinlock. Note, in fact, currently we always hold RTNL when calling these two functions, so we don't need any other lock at all, but keeping this lock doesn't harm anything. Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
nlmon device is not supposed to capture netlink events from other netns, so instead of filtering events, we can simply make netlink tap itself per netns. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Tom Herbert says: ==================== rhashtable: New features in walk and bucket This patch contains some changes to related rhashtable: - Above allow rhashtable_walk_start to return void - Add a functon to peek at the next entry during a walk - Abstract out function to compute a has for a table - A library function to alloc a spinlocks bucket array - Call the above function for rhashtable locks allocation Tested: Exercised using various operations on an ILA xlat table. v2: - Apply feedback from Herbert. Don't change semantics of resize event reporting and -EAGAIN, just simplify API for callers that ignore those. - Add end_of_table in iter to reliably tell when the iterator has reached to the eno. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
To allocate the array of bucket locks for the hash table we now call library function alloc_bucket_spinlocks. This function is based on the old alloc_bucket_locks in rhashtable and should produce the same effect. Signed-off-by: NTom Herbert <tom@quantonium.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Add two new library functions: alloc_bucket_spinlocks and free_bucket_spinlocks. These are used to allocate and free an array of spinlocks that are useful as locks for hash buckets. The interface specifies the maximum number of spinlocks in the array as well as a CPU multiplier to derive the number of spinlocks to allocate. The number allocated is rounded up to a power of two to make the array amenable to hash lookup. Signed-off-by: NTom Herbert <tom@quantonium.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Split out most of rht_key_hashfn which is calculating the hash into its own function. This way the hash function can be called separately to get the hash value. Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NTom Herbert <tom@quantonium.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
This function is like rhashtable_walk_next except that it only returns the current element in the inter and does not advance the iter. This patch also creates __rhashtable_walk_find_next. It finds the next element in the table when the entry cached in iter is NULL or at the end of a slot. __rhashtable_walk_find_next is called from rhashtable_walk_next and rhastable_walk_peek. end_of_table is an added field to the iter structure. This indicates that the end of table was reached (walker.tbl being NULL is not a sufficient condition for end of table). Signed-off-by: NTom Herbert <tom@quantonium.net> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Most callers of rhashtable_walk_start don't care about a resize event which is indicated by a return value of -EAGAIN. So calls to rhashtable_walk_start are wrapped wih code to ignore -EAGAIN. Something like this is common: ret = rhashtable_walk_start(rhiter); if (ret && ret != -EAGAIN) goto out; Since zero and -EAGAIN are the only possible return values from the function this check is pointless. The condition never evaluates to true. This patch changes rhashtable_walk_start to return void. This simplifies code for the callers that ignore -EAGAIN. For the few cases where the caller cares about the resize event, particularly where the table can be walked in mulitple parts for netlink or seq file dump, the function rhashtable_walk_start_check has been added that returns -EAGAIN on a resize event. Signed-off-by: NTom Herbert <tom@quantonium.net> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Fixes: 46e6b992 ("rtnetlink: allow GSO maximums to be set on device creation") Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 12月, 2017 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Conflict was two parallel additions of include files to sch_generic.c, no biggie. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 12月, 2017 21 次提交
-
-
由 Michal Hocko 提交于
Commit 4675ff05 ("kmemcheck: rip it out") has removed the code but for some reason SPDX header stayed in place. This looks like a rebase mistake in the mmotm tree or the merge mistake. Let's drop those leftovers as well. Signed-off-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb drivers). 2) Revert returning -EEXIST from __dev_alloc_name() as this propagates to userspace and broke some apps. From Johannes Berg. 3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong Wang. 4) Gianfar MAC can't do EEE so don't advertise it by default, from Claudiu Manoil. 5) Relax strict netlink attribute validation, but emit a warning. From David Ahern. 6) Fix regression in checksum offload of thunderx driver, from Florian Westphal. 7) Fix UAPI bpf issues on s390, from Hendrik Brueckner. 8) New card support in iwlwifi, from Ihab Zhaika. 9) BBR congestion control bug fixes from Neal Cardwell. 10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren. 11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan. 12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni. 13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits) net: mvpp2: fix the RSS table entry offset tcp: evaluate packet losses upon RTT change tcp: fix off-by-one bug in RACK tcp: always evaluate losses in RACK upon undo tcp: correctly test congestion state in RACK bnxt_en: Fix sources of spurious netpoll warnings tcp_bbr: reset long-term bandwidth sampling on loss recovery undo tcp_bbr: reset full pipe detection on loss recovery undo tcp_bbr: record "full bw reached" decision in new full_bw_reached bit sfc: pass valid pointers from efx_enqueue_unwind gianfar: Disable EEE autoneg by default tcp: invalidate rate samples during SACK reneging can: peak/pcie_fd: fix potential bug in restarting tx queue can: usb_8dev: cancel urb on -EPIPE and -EPROTO can: kvaser_usb: cancel urb on -EPIPE and -EPROTO can: esd_usb2: cancel urb on -EPIPE and -EPROTO can: ems_usb: cancel urb on -EPIPE and -EPROTO can: mcba_usb: cancel urb on -EPROTO usbnet: fix alignment for frames with no ethernet header tcp: use current time in tcp_rcv_space_adjust() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "A series of fixes for the media subsytem: - The largest amount of fixes in this series is with regards to comments that aren't kernel-doc, but start with "/**". A new check added for 4.15 makes it to produce a *huge* amount of new warnings (I'm compiling here with W=1). Most of the patches in this series fix those. No code changes - just comment changes at the source files - rc: some fixed in order to better handle RC repetition codes - v4l-async: use the v4l2_dev from the root notifier when matching sub-devices - v4l2-fwnode: Check subdev count after checking port - ov 13858 and et8ek8: compilation fix with randconfigs - usbtv: a trivial new USB ID addition - dibusb-common: don't do DMA on stack on firmware load - imx274: Fix error handling, add MAINTAINERS entry - sir_ir: detect presence of port" * tag 'media/v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (50 commits) media: imx274: Fix error handling, add MAINTAINERS entry media: v4l: async: use the v4l2_dev from the root notifier when matching sub-devices media: v4l2-fwnode: Check subdev count after checking port media: et8ek8: select V4L2_FWNODE media: ov13858: Select V4L2_FWNODE media: rc: partial revert of "media: rc: per-protocol repeat period" media: dvb: i2c transfers over usb cannot be done from stack media: dvb-frontends: complete kernel-doc markups media: docs: add documentation for frontend attach info media: dvb_frontends: fix kernel-doc macros media: drivers: remove "/**" from non-kernel-doc comments media: lm3560: add a missing kernel-doc parameter media: rcar_jpu: fix two kernel-doc markups media: vsp1: add a missing kernel-doc parameter media: soc_camera: fix a kernel-doc markup media: mt2063: fix some kernel-doc warnings media: radio-wl1273: fix a parameter name at kernel-doc macro media: s3c-camif: add missing description at s3c_camif_find_format() media: mtk-vpu: add description for wdt fields at struct mtk_vpu media: vdec: fix some kernel-doc warnings ...
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "This pull is a bit larger than I'd like but a large bunch of it is license fixes, AMD wanted to fix the licenses for a bunch of files that were missing them, Otherwise a bunch of TTM regression fix since the hugepage support, some i915 and gvt fixes, a core connector free in a safe context fix, and one bridge fix" * tag 'drm-fixes-for-v4.15-rc3' of git://people.freedesktop.org/~airlied/linux: (26 commits) drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk" drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usage drm/i915: Call i915_gem_init_userptr() before taking struct_mutex drm/exynos: remove unnecessary function declaration drm/exynos: remove unnecessary descrptions drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU drm/exynos: Fix dma-buf import drm/ttm: swap consecutive allocated pooled pages v4 drm: safely free connectors from connector_iter drm/i915/gvt: set max priority for gvt context drm/i915/gvt: Don't mark vgpu context as inactive when preempted drm/i915/gvt: Limit read hw reg to active vgpu drm/i915/gvt: Export intel_gvt_render_mmio_to_ring_id() drm/i915/gvt: Emulate PCI expansion ROM base address register drm/ttm: swap consecutive allocated cached pages v3 drm/ttm: roundup the shrink request to prevent skip huge pool drm/ttm: add page order support in ttm_pages_put drm/ttm: add set_pages_wb for handling page order more than zero drm/ttm: add page order in page pool ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md由 Linus Torvalds 提交于
Pull md fixes from Shaohua Li: "Some MD fixes. The notable one is a raid5-cache deadlock bug with dm-raid, others are not significant" * tag 'md/4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid1/10: add missed blk plug md: limit mdstat resync progress to max_sectors md/r5cache: move mddev_lock() out of r5c_journal_mode_set() md/raid5: correct degraded calculation in raid5_error
-
由 Linus Torvalds 提交于
Merge tag 'devicetree-fixes-for-4.15-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: "Another set of DT fixes: - Fixes from overlay code rework. A trifecta of fixes to the locking, an out of bounds access, and a memory leak in of_overlay_apply() - Clean-up at25 eeprom binding document - Remove leading '0x' in unit-addresses from binding docs" * tag 'devicetree-fixes-for-4.15-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: overlay: Make node skipping in init_overlay_changeset() clearer of: overlay: Fix out-of-bounds write in init_overlay_changeset() of: overlay: Fix (un)locking in of_overlay_apply() of: overlay: Fix memory leak in of_overlay_apply() error path dt-bindings: eeprom: at25: Document device-specific compatible values dt-bindings: eeprom: at25: Grammar s/are can/can/ dt-bindings: Remove leading 0x from bindings notation of: overlay: Remove else after goto of: Spelling s/changset/changeset/ of: unittest: Remove bogus overlay mutex release from overlay_data_add()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull virtio bugfixes from Michael Tsirkin: "A couple of minor bugfixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_net: fix return value check in receive_mergeable() virtio_mmio: add cleanup for virtio_mmio_remove virtio_mmio: add cleanup for virtio_mmio_probe
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen fixes from Juergen Gross: "Just two small fixes for the new pvcalls frontend driver" * tag 'for-linus-4.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvcalls: Fix a check in pvcalls_front_remove() xen/pvcalls: check for xenbus_read() errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "One notable fix for kexec on Power9, where we were not clearing MMU PID properly which sometimes leads to hangs. Finally debugged to a root cause by Nick. A revert of a patch which tried to rework our panic handling to get more output on the console, but inadvertently broke reporting the panic to the hypervisor, which apparently people care about. Then a fix for an oops in the PMU code, and finally some s/%p/%px/ in xmon. Thanks to: David Gibson, Nicholas Piggin, Ravi Bangoria" * tag 'powerpc-4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/xmon: Don't print hashed pointers in xmon powerpc/64s: Initialize ISAv3 MMU registers before setting partition table Revert "powerpc: Do not call ppc_md.panic in fadump panic notifier" powerpc/perf: Fix oops when grouping different pmu events
-
由 David S. Miller 提交于
Merge tag 'linux-can-fixes-for-4.15-20171208' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-12-08 this is a pull request of 6 patches for net/master. Martin Kelly provides 5 patches for various USB based CAN drivers, that properly cancel the URBs on adapter unplug, so that the driver doesn't end up in an endless loop. Stephane Grosjean provides a patch to restart the tx queue if zero length packages are transmitted. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Girish Moodalbail 提交于
Move 'macaddr_count' from after 'netpoll' to after 'nest_level' to pack and reduce a memory hole. Fixes: 88ca59d1 (macvlan: remove unused fields in struct macvlan_dev) Signed-off-by: NGirish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-for-davem-2017-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.15 Second set of fixes for 4.15. This time a lot of iwlwifi patches and two brcmfmac patches. Most important here are the MIC and IVC fixes for iwlwifi to unbreak 9000 series. iwlwifi * fix rate-scaling to not start lowest possible rate * fix the TX queue hang detection for AP/GO modes * fix the TX queue hang timeout in monitor interfaces * fix packet injection * remove a wrong error message when dumping PCI registers * fix race condition with RF-kill * tell mac80211 when the MIC has been stripped (9000 series) * tell mac80211 when the IVC has been stripped (9000 series) * add 2 new PCI IDs, one for 9000 and one for 22000 * fix a queue hang due during a P2P Remain-on-Channel operation brcmfmac * fix a race which sometimes caused a crash during sdio unbind * fix a kernel-doc related build error ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marc Kleine-Budde 提交于
The first and only parameter of sl_alloc() is unused, so remove it. Fixes: 5342b77c slip: ("Clean up create and destroy") Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Tenart 提交于
The macro used to access or set an RSS table entry was using an offset of 8, while it should use an offset of 0. This lead to wrongly configure the RSS table, not accessing the right entries. Fixes: 1d7d15d7 ("net: mvpp2: initialize the RSS tables") Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Rahul Lakkireddy says: ==================== cxgb4: collect hardware logs via ethtool Collect more hardware logs via ethtool --get-dump facility. Patch 1 collects on-chip memory layout information. Patch 2 collects on-chip MC memory dumps. Patch 3 collects HMA memory dump. Patch 4 evaluates and skips TX and RX payload regions in memory dumps. Patch 5 collects egress and ingress SGE queue contexts. Patch 6 collects PCIe configuration logs ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Use meminfo to identify the egress and ingress context regions and fetch all valid contexts from those regions. Also flush all contexts before attempting collection to prevent stale information. Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Use meminfo to identify TX and RX payload regions and skip them in collection of EDC, MC, and HMA. Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Use meminfo to get base address and size of MC memory. Also use same meminfo for EDC memory dumps. Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Collect memory layout of various on-chip memory regions. Move code for collecting on-chip memory information to cudbg_lib.c and update cxgb4_debugfs.c to use the common function. Also include cudbg_entity.h before cudbg_lib.h to avoid adding cudbg entity structure forward declarations in cudbg_lib.h. Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-