* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: additional regression fix for device removal

Commit e534c5b8 (USB: fix regression
occurring during device removal) didn't go far enough.  It failed to
take into account that when a driver claims multiple interfaces, it may
release them all at the same time.  As a result, some interfaces can
get released before they are unregistered, and we deadlock trying to
acquire the bandwidth_mutex that we already own.

This patch (asl478) handles this case by setting the "unregistering"
flag on all the interfaces before removing any of them.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Tested-by: NÉric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Hibernate: Fix free_unnecessary_pages()

* 'for-linus' of git://git.kernel.dk/linux-block:
  drbd: we should write meta data updates with FLUSH FUA
  drbd: fix limit define, we support 1 PiByte now
  drbd: when receive times out on meta socket, also check last receive time on data socket
  drbd: account bitmap IO during resync as resync-(related-)-io
  drbd: don't cond_resched_lock with IRQs disabled
  drbd: add missing spinlock to bitmap receive
  drbd: Use the correct max_bio_size when creating resync requests
  cfq-iosched: make code consistent
  cfq-iosched: fix a rcu warning

Add an FS-Cache helper to bulk uncache pages on an inode.  This will
only work for the circumstance where the pages in the cache correspond
1:1 with the pages attached to an inode's page cache.

This is required for CIFS and NFS: When disabling inode cookie, we were
returning the cookie and setting cifsi->fscache to NULL but failed to
invalidate any previously mapped pages.  This resulted in "Bad page
state" errors and manifested in other kind of errors when running
fsstress.  Fix it by uncaching mapped pages when we disable the inode
cookie.

This patch should fix the following oops and "Bad page state" errors
seen during fsstress testing.

  ------------[ cut here ]------------
  kernel BUG at fs/cachefiles/namei.c:201!
  invalid opcode: 0000 [#1] SMP
  Pid: 5, comm: kworker/u:0 Not tainted 2.6.38.7-30.fc15.x86_64 #1 Bochs Bochs
  RIP: 0010: cachefiles_walk_to_object+0x436/0x745 [cachefiles]
  RSP: 0018:ffff88002ce6dd00  EFLAGS: 00010282
  RAX: ffff88002ef165f0 RBX: ffff88001811f500 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000282
  RBP: ffff88002ce6dda0 R08: 0000000000000100 R09: ffffffff81b3a300
  R10: 0000ffff00066c0a R11: 0000000000000003 R12: ffff88002ae54840
  R13: ffff88002ae54840 R14: ffff880029c29c00 R15: ffff88001811f4b0
  FS:  00007f394dd32720(0000) GS:ffff88002ef00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00007fffcb62ddf8 CR3: 000000001825f000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process kworker/u:0 (pid: 5, threadinfo ffff88002ce6c000, task ffff88002ce55cc0)
  Stack:
   0000000000000246 ffff88002ce55cc0 ffff88002ce6dd58 ffff88001815dc00
   ffff8800185246c0 ffff88001811f618 ffff880029c29d18 ffff88001811f380
   ffff88002ce6dd50 ffffffff814757e4 ffff88002ce6dda0 ffffffff8106ac56
  Call Trace:
   cachefiles_lookup_object+0x78/0xd4 [cachefiles]
   fscache_lookup_object+0x131/0x16d [fscache]
   fscache_object_work_func+0x1bc/0x669 [fscache]
   process_one_work+0x186/0x298
   worker_thread+0xda/0x15d
   kthread+0x84/0x8c
   kernel_thread_helper+0x4/0x10
  RIP  cachefiles_walk_to_object+0x436/0x745 [cachefiles]
  ---[ end trace 1d481c9af1804caa ]---

I tested the uncaching by the following means:

 (1) Create a big file on my NFS server (104857600 bytes).

 (2) Read the file into the cache with md5sum on the NFS client.  Look in
     /proc/fs/fscache/stats:

	Pages  : mrk=25601 unc=0

 (3) Open the file for read/write ("bash 5<>/warthog/bigfile").  Look in proc
     again:

	Pages  : mrk=25601 unc=25601
Reported-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-and-Tested-by: NSuresh Jayaraman <sjayaraman@suse.de>
cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pci: Move check for acpi_sci_override_gsi to xen_setup_acpi_sci.

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Don't use the EFI reboot method by default
  x86, suspend: Restore MISC_ENABLE MSR in realmode wakeup
  x86, reboot: Acer Aspire One A110 reboot quirk
  x86-32, NUMA: Fix boot regression caused by NUMA init unification on highmem machines

Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  debugobjects: Fix boot crash when kmemleak and debugobjects enabled

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  jump_label: Fix jump_label update for modules
  oprofile, x86: Fix race in nmi handler while starting counters

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Disable (revert) SCHED_LOAD_SCALE increase
  sched, cgroups: Fix MIN_SHARES on 64-bit boxen

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits)
  sctp: fix missing send up SCTP_SENDER_DRY_EVENT when subscribe it
  net: refine {udp|tcp|sctp}_mem limits
  vmxnet3: round down # of queues to power of two
  net: sh_eth: fix the parameter for the ETHER of SH7757
  net: sh_eth: fix cannot work half-duplex mode
  net: vlan: enable soft features regardless of underlying device
  vmxnet3: fix starving rx ring whenoc_skb kb fails
  bridge: Always flood broadcast packets
  greth: greth_set_mac_add would corrupt the MAC address.
  net: bind() fix error return on wrong address family
  natsemi: silence dma-debug warnings
  net: 8139too: Initial necessary vlan_features to support vlan
  Fix call trace when interrupts are disabled while sleeping function kzalloc is called
  qlge:Version change to v1.00.00.29
  qlge: Fix printk priority so chip fatal errors are always reported.
  qlge:Fix crash caused by mailbox execution on wedged chip.
  xfrm4: Don't call icmp_send on local error
  ipv4: Don't use ufo handling on later transformed packets
  xfrm: Remove family arg from xfrm_bundle_ok
  ipv6: Don't put artificial limit on routing table size.
  ...

Previously we would check for acpi_sci_override_gsi == gsi every time
a PCI device was enabled. That works during early bootup, but later
on it could lead to triggering unnecessarily the acpi_gsi_to_irq(..) lookup.
The reason is that acpi_sci_override_gsi was declared in __initdata and
after early bootup could contain bogus values.

This patch moves the check for acpi_sci_override_gsi to the
site where the ACPI SCI is preset.

CC: stable@kernel.org
Reported-by: NRaghavendra D Prabhu <rprabhu@wnohang.net>
Tested-by: NRaghavendra D Prabhu <rprabhu@wnohang.net>
[http://lists.xensource.com/archives/html/xen-devel/2011-07/msg00154.html]
Suggested-by: NIan Campbell <ijc@hellion.org.uk>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We forgot to send up SCTP_SENDER_DRY_EVENT notification when
user app subscribes to this event, and there is no data to be
sent or retransmit.

This is required by the Socket API and used by the DTLS/SCTP
implementation.
Reported-by: NMichael Tüxen <Michael.Tuexen@lurchi.franken.de>
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Tested-by: NRobin Seggelmann <seggelmann@fh-muenster.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Testing suggests that at least some Lenovos and some Intels will
fail to reboot via EFI, attempting to jump to an unmapped
physical address. In the long run we could handle this by
providing a page table with a 1:1 mapping of physical addresses,
but for now it's probably just easier to assume that ACPI or
legacy methods will be present and reboot via those.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/1309985557-15350-1-git-send-email-mjg@redhat.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Current tcp/udp/sctp global memory limits are not taking into account
hugepages allocations, and allow 50% of ram to be used by buffers of a
single protocol [ not counting space used by sockets / inodes ...]

Lets use nr_free_buffer_pages() and allow a default of 1/8 of kernel ram
per protocol, and a minimum of 128 pages.
Heavy duty machines sysadmins probably need to tweak limits anyway.


References: https://bugzilla.stlinux.com/show_bug.cgi?id=38032Reported-by: Nstarlight <starlight@binnacle.cx>
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

vmxnet3 device supports only power-of-two number of queues. The driver
therefore needs to check this and rounds down the number of queues to the
nearest power of two.
Signed-off-by: NYong Wang <yongwang@vmware.com>
Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com>
Reviewed-by: NDmitry Torokhov <dtor@vmware.com>

Some BIOSes will reset the Intel MISC_ENABLE MSR (specifically the
XD_DISABLE bit) when resuming from S3, which can interact poorly with
ebba638a. In 32bit PAE mode, this can
lead to a fault when EFER is restored by the kernel wakeup routines,
due to it setting the NX bit for a CPU that (thanks to the BIOS reset)
now incorrectly thinks it lacks the NX feature. (64bit is not affected
because it uses a common CPU bring-up that specifically handles the
XD_DISABLE bit.)

The need for MISC_ENABLE being restored so early is specific to the S3
resume path. Normally, MISC_ENABLE is saved in save_processor_state(),
but this happens after the resume header is created, so just reproduce
the logic here. (acpi_suspend_lowlevel() creates the header, calls
do_suspend_lowlevel, which calls save_processor_state(), so the saved
processor context isn't available during resume header creation.)

[ hpa: Consider for stable if OK in mainline ]
Signed-off-by: NKees Cook <kees.cook@canonical.com>
Link: http://lkml.kernel.org/r/20110707011034.GA8523@outflux.netSigned-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: <stable@kernel.org> 2.6.38+

* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
  gpio: tps65910: add missing breaks in tps65910_gpio_init

All the blkio.throttle.* file names are incorrectly reported without
".throttle" in the documentation. Fix it.
Signed-off-by: NAndrea Righi <andrea@betterlinux.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The list of available general purpose memory allocators in
Documentation/CodingStyle chapter 14 is incomplete. This patch adds
the missing vzalloc() to the list.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move location of quilt series for kernel-doc patches.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (46 commits)
  [media] rc: call input_sync after scancode reports
  [media] imon: allow either proto on unknown 0xffdc
  [media] imon: auto-config ffdc 7e device
  [media] saa7134: fix raw IR timeout value
  [media] rc: fix ghost keypresses with certain hw
  [media] [staging] lirc_serial: allocate irq at init time
  [media] lirc_zilog: fix spinning rx thread
  [media] keymaps: fix table for pinnacle pctv hd devices
  [media] ite-cir: 8709 needs to use pnp resource 2
  [media] V4L: mx1-camera: fix uninitialized variable
  [media] omap_vout: Added check in reqbuf & mmap for buf_size allocation
  [media] OMAP_VOUT: Change hardcoded device node number to -1
  [media] OMAP_VOUTLIB: Fix wrong resizer calculation
  [media] uvcvideo: Disable the queue when failing to start
  [media] uvcvideo: Remove buffers from the queues when freeing
  [media] uvcvideo: Ignore entities for terminals with no supported format
  [media] v4l: Don't access media entity after is has been destroyed
  [media] media: omap3isp: fix a potential NULL deref
  [media] media: vb2: fix allocation failure check
  [media] media: vb2: reset queued_count value during queue reinitialization
  ...

Fix up trivial conflict in MAINTAINERS as per Mauro

The shdr4extnum variable isn't being freed in the cleanup process of
elf_fdpic_core_dump().
Signed-off-by: NDavidlohr Bueso <dave@gnu.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a bug in free_unnecessary_pages() that causes it to
attempt to free too many pages in some cases, which triggers the
BUG_ON() in memory_bm_clear_bit() for copy_bm.  Namely, if
count_data_pages() is initially greater than alloc_normal, we get
to_free_normal equal to 0 and "save" greater from 0.  In that case,
if the sum of "save" and count_highmem_pages() is greater than
alloc_highmem, we subtract a positive number from to_free_normal.
Hence, since to_free_normal was 0 before the subtraction and is
an unsigned int, the result is converted to a huge positive number
that is used as the number of pages to free.

Fix this bug by checking if to_free_normal is actually greater
than or equal to the number we're going to subtract from it.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: NMatthew Garrett <mjg@redhat.com>
Cc: stable@kernel.org

Provides the ability to resize a resource that is already allocated.
This functionality is put in place to support reallocation needs of
pci resources.
Signed-off-by: NRam Pai <linuxram@us.ibm.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

locks_alloc_lock() assumed that the allocated struct file_lock is
already initialized to zero members.  This is only true for the first
allocation of the structure, after reuse some of the members will have
random values.

This will for example result in passing random fl_start values to
userspace in fuse for FL_FLOCK locks, which is an information leak at
best.

Fix by reinitializing those members which may be non-zero after freeing.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the driver didn't set this parameter on the ETHER, the CPU will
encounter the "data address error" exception.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When link was down, the bit of DM in ECMR was always set.
So, we could not use half-duplex mode on the controller.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: fix regression occurring during device removal
  USB: fsl_udc_core: fix build breakage when building for ARM arch

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Add Makefile and Kconfig Entries for tps65911 comparator
  mfd: Fix build error for tps65911-comparator.c
  Revert "mfd: Add omap-usbhs runtime PM support"
  input: pmic8xxx-pwrkey: Do not use mfd_get_data()
  input: pmic8xxx-keypad: Do not use mfd_get_data()

If gso/gro feature of underlying device is turned off，
then new created vlan device never can turn gso/gro on. 

Although underlying device don't support TSO, we still
should use software segments for vlan device.
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since git commit
  660e34ce x86: reorder reboot method
  preferences,
my Acer Aspire One hangs on reboot.  It appears that its ACPI method
for rebooting is broken.  The attached patch adds a quirk so that the
machine will reboot via the BIOS.

[ hpa: verified that the ACPI control on this machine is just plain broken. ]
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Link: http://lkml.kernel.org/r/w439iki5vl.wl%25peter@chubb.wattle.id.auSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

If the rx ring is completely empty, then the device may never fire an rx
interrupt. Unfortunately, the rx interrupt is what triggers populating the
rx ring with fresh buffers, so this will cause networking to lock up.

This patch replenishes the skb in recv descriptor as soon as it is
peeled off while processing rx completions. If the skb/buffer
allocation fails, existing one is recycled and the packet in hand is
dropped. This way none of the RX desc is ever left empty, thus avoiding
starvation
Signed-off-by: NScott J. Goldman <scottjg@vmware.com>
Signed-off-by: NShreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As is_multicast_ether_addr returns true on broadcast packets as
well, we need to explicitly exclude broadcast packets so that
they're always flooded.  This wasn't an issue before as broadcast
packets were considered to be an unregistered multicast group,
which were always flooded.  However, as we now only flood such
packets to router ports, this is no longer acceptable.
Reported-by: NMichael Guntsche <mike@it-loops.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: fix sync and dio writes across stripe boundaries
  libceph: fix page calculation for non-page-aligned io
  ceph: fix page alignment corrections

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus:
  hfsplus: Fix double iput of the same inode in hfsplus_fill_super()
  hfsplus: add missing call to bio_put()

Alex reported that commit c8b28116 ("sched: Increase
SCHED_LOAD_SCALE resolution") caused a power usage regression
under light load as it increases the number of load-balance
operations and keeps idle cpus from staying idle.

Time has run out to find the root cause for this release so
disable the feature for v3.0 until we can figure out what
causes the problem.
Reported-by: N"Alex, Shi" <alex.shi@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-m4onxn0sxnyn5iz9o88eskc3@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Base on Mark's comment [1], I make the Kconfig entry invisible to users.
[1] https://lkml.org/lkml/2011/5/14/136Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Fix below build error:
  CC      drivers/mfd/tps65911-comparator.o
drivers/mfd/tps65911-comparator.c: In function 'tps65911_comparator_probe':
drivers/mfd/tps65911-comparator.c:131: error: 'struct tps65910_platform_data' has no member named 'vmbch_threshold'
drivers/mfd/tps65911-comparator.c:137: error: 'struct tps65910_platform_data' has no member named 'vmbch2_threshold'
make[2]: *** [drivers/mfd/tps65911-comparator.o] Error 1
make[1]: *** [drivers/mfd] Error 2
make: *** [drivers] Error 2
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This reverts commit 7e6502d5.

Oops are produced during initialization of ehci and ohci
drivers. This is because the run time pm apis are used by
the driver but the corresponding hwmod structures and
initialization is not merged. hence revering  back the
commit id 7e6502d5Signed-off-by: NKeshava Munegowda <keshava_mgowda@ti.com>
Reported-by: NLuciano Coelho <coelho@ti.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

mfd_get_data() has been removed from the MFD API.

Cc: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>