Minimal implementation of an IIO driver for the Sensortek
STK8312 3-axis accelerometer. Datasheet:
http://www.syi-group.com/uploadpic/data/201361817562681623.pdf

Includes:
- ACPI support;
- read_raw for x,y,z axes;
- reading and setting the scale (range) parameter.
- power management
Signed-off-by: NTiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

If the interrupt pins are not available, we should still be able to use
the buffer with an external trigger.  However, we won't be able to use
the hardware fifo since we have no means of signalling when the
watermark is reached.

I also added a comment to indicate that the timestamps in
bmc150_accel_data are only used for hardware fifo, since initially I was
confused about duplication with pf->timestamp.
Signed-off-by: NVlad Dogaru <vlad.dogaru@intel.com>
Reviewed-by: NOctavian Purdila <octavian.purdila@intel.com>
Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add a high pass filter attribute for measurements
(like the existing low pass)

Also add both high and low pass attributes for events.
Signed-off-by: NMartin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NMartin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Many of the hardware configuration registers may only be modified while the
device is inactive.

Currently the probe code first activates the device and then modifies the
registers (eg to set the scale). This doesn't actually work but is not
noticed since the scale used is the default value.

While at it also issue a hardware reset command at probe time.
Signed-off-by: NMartin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Make it possible to use buffering with an external trigger, such as one
based on sysfs or hrtimer.
Signed-off-by: NVlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Replace the 'timestamp' field in struct bmg160_data with the identically
named field in iio_poll_func and with calls to iio_get_time_ns().

The reported timestamps may be slightly different, but the advantage is
that we no longer assume that the buffer of bmg160 is triggered by its
own trigger.
Signed-off-by: NVlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

We only have to call the request_update() callback for a newly inserted
buffer. The configuration of the already previously active buffers will not
have changed.

This also allows us to move the request_update() call to the beginning of
__iio_update_buffers(), before any currently active buffers are stopped.
This makes the error handling a lot easier since no changes were made to
the buffer list and no rollback needs to be performed.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add a small helper function iio_free_scan_mask() that takes a mask and
frees its memory if the scan masks for the device are dynamically
allocated, otherwise does nothing. This means we don't have to open-code
the same check over and over again in __iio_update_buffers.

Also free compound_mask as soon a we are done using it. This constrains its
usage to a specific region of the function will make further refactoring
and splitting the function into smaller sub-parts more easier.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

While more verbose error messages are useful for debugging we should really
not put those error messages into the kernel log for normal errors that are
already reported to the application via the error code, when running in
non-debug mode.

Otherwise application authors might expect that this is part of the ABI and
to get the error they should scan the kernel log. Which would be rather
error prone itself since there is no direct mapping between a operation and
the error message so it is impossible to find out which error message
belongs to which error.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

m62332 is a simple 2-channel DAC used on several Sharp Zaurus boards to
control LCD voltage, backlight and sound. The driver use regulators to
control the reference voltage and enabling/disabling the DAC.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Added support to calculate lux value from visible
and IR spectrum adc count values. Also added IIO_LIGHT
channel to enable user read the lux value directly
from device using illuminance input ABI.
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

'channels' is allocated via kmemdup and it is never freed in the
subsequent error paths.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

'channels' is allocated via kmemdup and it is never freed in the
subsequent error paths.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

'channels' is allocated via kmemdup and it is never freed in the
subsequent error paths.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

'channels' is allocated via kmemdup and it is never freed in the
subsequent error paths.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

'channels' is allocated via kmemdup and it is never freed in the
subsequent error paths.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

'channels' is allocated via kmemdup and it is never freed in the
subsequent error paths.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Currently, proximity sensor boundary check is done
inside the switch block but outside the case
statement.Since this code will never get executed,
moved the check outside the switch case statement.

   867          case IIO_PROXIMITY:
   868                  switch (dir) {
   // Following line has been moved outside the switch block.
   869                  if (val > LTR501_PS_THRESH_MASK)
   870                          return -EINVAL;
   871                  case IIO_EV_DIR_RISING:
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This is mostly part of an effort to clean out our current warnings
and make the autobuilder build reports more useful.

Still a worthwhile if trivial cleanup!
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Cc: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>
Cc: Peter Meerwald <pmeerw@pmeerw.net>

Add optional DT properties to set open delay, sample delay and number
of averages per sample for each adc step. Open delay, sample delay
and averaging are some of the parameters that affect the sampling rate
and accuracy of the sample. Making these parameters configurable via
DT will help in balancing speed vs accuracy.
Signed-off-by: NVignesh R <vigneshr@ti.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This driver adds the initial support for the ACPI Ambient Light Sensor
as defined in Section 9.2 of the ACPI specification (Revision 5.0) [1].

Sensors complying with the standard are exposed as ACPI devices with
ACPI0008 as hardware ID and provide standard methods by which the OS
can query properties of the ambient light environment the system is
currently operating in.

This driver currently allows only to get the current ambient light
illuminance reading through the _ALI method, but is ready to be
extended extended to handle _ALC, _ALT and _ALP as well.

[1] http://www.acpi.info/DOWNLOADS/ACPIspec50.pdfSigned-off-by: NMartin Liska <marxin.liska@gmail.com>
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NVarka Bhadram <varkab@cdac.in>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light
sensors.
Signed-off-by: NTomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

When cross-compiling the IIO tools we need to opportunity to
specify a cross compiler prefix and some extra CFLAGS. This
patch enables this in the same way as for other stuff in
tools.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

We assume that ACPI device tables use MMC35240 to
identify MEMSIC's 3 axis magnetic sensor.
Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

We rely on regmap to save the state of the registers at suspend,
and then we do an explicit sync at resume.
Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Minimal implementation for MMC35240 3-axis magnetometer
sensor. It provides processed readings and possiblity to change
the sampling frequency.
Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Export the oversampling ratio so that the user can change the
number of repetions for x/y/z axis.

The sampling frequency is limited by the oversampling ratio.
The available sampling frequencies might change depending
on the values of oversampling_ratio.

The specification can be downloaded from:
http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Some magnetometers can perform a number of repetitions in HW
for each measurement to increase accuracy. One example is
Bosch BMC150:
http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf.

Introduce an interface to set the oversampling ratio
for these devices.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add binding documentation for Bosch BMC150 magnetometer.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>