1. 19 10月, 2006 1 次提交
    • V
      Fix DMA resource allocation in ACPIPnP · ccc4c7bb
      Vojtech Pavlik 提交于
      The ACPIPnP implementation had the understanding of Linux resource flags very
      wrong, resulting in a nonfunctional implementation of DMA resource
      allocation.
      
      This was usually not a problem, since almost no on-board PnP devices use ISA
      DMA, with the exception of ECP parallel ports. Even with that, parallel port
      DMA is preconfigured by the BIOS, so this routine isn't normally called.
      
      Except in the case where somebody does 'rmmod parport_pc; modprobe
      parport_pc', where the rmmod case disables the ECP parallel port resources,
      and they need to be enabled again to initialize the module. This didn't
      work, resulting in a non-printing printer.
      
      The application doing exactly the above to force reprobing of printers is
      the YaST printer module. Thus without this fix YaST wedged the printer when
      configuring it, and was not able to print a test page.
      Reported-by: NRalf Flaxa <rf@suse.de>
      Reproduced-by: NJiri Dluhos <jdluhos@suse.cz>
      Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>
      Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      
      ccc4c7bb
  2. 06 8月, 2006 1 次提交
  3. 04 7月, 2006 1 次提交
  4. 02 4月, 2006 3 次提交
  5. 20 1月, 2006 1 次提交
  6. 07 1月, 2006 1 次提交
  7. 10 12月, 2005 2 次提交
    • B
      [ACPI] ACPICA 20051021 · 0897831b
      Bob Moore 提交于
      Implemented support for the EM64T and other x86_64
      processors. This essentially entails recognizing
      that these processors support non-aligned memory
      transfers. Previously, all 64-bit processors were assumed
      to lack hardware support for non-aligned transfers.
      
      Completed conversion of the Resource Manager to nearly
      full table-driven operation. Specifically, the resource
      conversion code (convert AML to internal format and the
      reverse) and the debug code to dump internal resource
      descriptors are fully table-driven, reducing code and data
      size and improving maintainability.
      
      The OSL interfaces for Acquire and Release Lock now use a
      64-bit flag word on 64-bit processors instead of a fixed
      32-bit word. (Alexey Starikovskiy)
      
      Implemented support within the resource conversion code
      for the Type-Specific byte within the various ACPI 3.0
      *WordSpace macros.
      
      Fixed some issues within the resource conversion code for
      the type-specific flags for both Memory and I/O address
      resource descriptors. For Memory, implemented support
      for the MTP and TTP flags. For I/O, split the TRS and TTP
      flags into two separate fields.
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      0897831b
    • B
      [ACPI] ACPICA 20050930 · 50eca3eb
      Bob Moore 提交于
      Completed a major overhaul of the Resource Manager code -
      specifically, optimizations in the area of the AML/internal
      resource conversion code. The code has been optimized to
      simplify and eliminate duplicated code, CPU stack use has
      been decreased by optimizing function parameters and local
      variables, and naming conventions across the manager have
      been standardized for clarity and ease of maintenance (this
      includes function, parameter, variable, and struct/typedef
      names.)
      
      All Resource Manager dispatch and information tables have
      been moved to a single location for clarity and ease of
      maintenance. One new file was created, named "rsinfo.c".
      
      The ACPI return macros (return_ACPI_STATUS, etc.) have
      been modified to guarantee that the argument is
      not evaluated twice, making them less prone to macro
      side-effects. However, since there exists the possibility
      of additional stack use if a particular compiler cannot
      optimize them (such as in the debug generation case),
      the original macros are optionally available.  Note that
      some invocations of the return_VALUE macro may now cause
      size mismatch warnings; the return_UINT8 and return_UINT32
      macros are provided to eliminate these. (From Randy Dunlap)
      
      Implemented a new mechanism to enable debug tracing for
      individual control methods. A new external interface,
      acpi_debug_trace(), is provided to enable this mechanism. The
      intent is to allow the host OS to easily enable and disable
      tracing for problematic control methods. This interface
      can be easily exposed to a user or debugger interface if
      desired. See the file psxface.c for details.
      
      acpi_ut_callocate() will now return a valid pointer if a
      length of zero is specified - a length of one is used
      and a warning is issued. This matches the behavior of
      acpi_ut_allocate().
      Signed-off-by: NBob Moore <robert.moore@intel.com>
      Signed-off-by: NLen Brown <len.brown@intel.com>
      50eca3eb
  8. 22 9月, 2005 1 次提交
  9. 08 9月, 2005 1 次提交
  10. 03 9月, 2005 1 次提交
  11. 05 8月, 2005 1 次提交
  12. 12 7月, 2005 2 次提交
  13. 01 5月, 2005 1 次提交
  14. 17 4月, 2005 1 次提交
    • L
      Linux-2.6.12-rc2 · 1da177e4
      Linus Torvalds 提交于
      Initial git repository build. I'm not bothering with the full history,
      even though we have it. We can create a separate "historical" git
      archive of that later if we want to, and in the meantime it's about
      3.2GB when imported into git - space that would just make the early
      git days unnecessarily complicated, when we don't have a lot of good
      infrastructure for it.
      
      Let it rip!
      1da177e4