This eliminates having an #ifdef returning NULL for the case
when OF is disabled.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The address S3C_VA_UART is a statically ioremapped address. The driver
should not be using this. Instead, the driver should setup a mapping
during probe.

Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Detected by cppcheck:
[others/linux/drivers/tty/serial/mxs-auart.c:553]: (style) Same expression on both sides of '||'.
Signed-off-by: NThomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that support for RM9000 and platforms based on it has been removed,
remove the serial driver for it as well.  It's really only been a quirk
for an almost 8250 compatible UART anyway.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/tty/serial/8250/8250.c  | 70 +----------------------------------------
 drivers/tty/serial/8250/Kconfig |  9 ------
 include/linux/serial_core.h     |  1 -
 3 files changed, 1 insertion(+), 79 deletions(-)
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

  before goto out5,  soft, control, serial are all assigned to idd
  after finish call ioc4_serial_remove_one, all resources are released
  we need return instead of go on, or double free
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CSR SiRFmarco's UART IP is same with SiRFprimaII except that
it has two more uart ports.
this patch makes the old driver support new SiRFmarco as well:
1. add .compatible = "sirf,marco-uart" to OF match table
2. add two ports in the port table
3. take spin_lock in isr to avoid the conflict of threads opening
uart on CPU1 and isr running on CPU0.
For 3, we did see some problems on SiRFmarco as SiRFmarco is a
SMP SoC but the old SiRFprimaII is UP.
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The serial core is using power states lifted from ACPI for no
good reason. Remove this reference from the documentation and
alter all users to use an enum specific to the serial core
instead, and define it in <linux/serial_core.h>.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NAlan Cox <alan@linux.intel.com>
Reviewed-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Some systems require the additional communication functionality of a
9-bit UART. For that we could use the "stick" (mark/space) parity
bit supported on omap serial device. When is set, if PARODD is set the
parity bit is always 1; if PARODD is not set, then the parity bit is
always 0.
Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Jonathan Woithe posted an out of tree enabler/control module for these
cards.  Lift the relevant identifiers and put them in the 8250_pci driver
along with code used to control custom registers on these cards.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NJonathan Woithe <jwoithe@just42.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We need to move this file to allow ARM multiplatform configurations
to build for omap2+. This can now be done as this file now only
contains platform_data.

cc: Russell King <linux@arm.linux.org.uk>
cc: Alan Cox <alan@linux.intel.com>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Govindraj.R <govindraj.raja@ti.com>
cc: Kevin Hilman <khilman@ti.com>
cc: linux-serial@vger.kernel.org
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

serial_core.c usually does

	if (HIGH_BITS_OFFSET)
		expr-involving-HIGH_BITS_OFFSET()

at least to avoid generating useless code on 32-bit machines, where
HIGH_BITS_OFFSET is zero.  Do that in uart_get_attr_port().

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch add modem power off function in the reboot process according registering
reboot callback to the reboot_notifier_list. Also realizing the spi shutdown function.
Signed-off-by: NBi Chao <chao.bi@intel.com>
Signed-off-by: NChen Jun <jun.d.chen@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We should first unmap the DMA scatter list for receiving data, and
then copy the data from the DMA buffer.

The old code misses unmap the scatter list for RX. This patch fixes it.
Signed-off-by: NHuang Shijie <b32955@freescale.com>
Tested-by: NLauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When the DMA is enabled, the Receive Timeout interrupt is very easy to be arised
in the 3M baud rate.  The interrupt handler (aka mxs_auart_irq_handle) will call
mxs_auart_rx_chars() to handle the received data. This is not right, we can not
get the correct data from the RXFIFO now, the data have been moved to the
DMA buffer by the DMA engine.

This patch
  (1) disables the Receive Timeout Interrupt when the DMA is enabled,
  (2) and invoke the mxs_auart_rx_chars() only when the DMA is not enabled.
Signed-off-by: NHuang Shijie <b32955@freescale.com>
Tested-by: NLauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix gcc warning of mixed data/code:

drivers/tty/serial/ifx6x60.c:516:2: warning: ISO C90 forbids mixed declarations and code
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Russ Gorby <russ.gorby@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Until now only the Exynos SoCs could use the serial driver via the
device tree. This patch adds compatible properties for the other
supported SoCs as well.

Tested on a s3c2416 based machine.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Certain tty line discipline implementations such slip and bluetooth hci invoke
the serial core uart_write() api in their write_wakeup callback. This leads to
a soft lockup with samsung serial driver since the uart port lock is taken in
the driver's interrupt handler and uart_write() attempts to take the same lock
again.

Fix this issue by releasing the uart port lock before the call to
uart_write_wakeup() in the tx handler. Also move the spin-lock/unlock sequence
from s3c64xx_serial_handle_irq() function into the tx and rx irq handlers so
that this change is applicable to s3c24xx platforms as well.
Reported-by: NKyungmin Park <kyungmin.park@samsung.com>
Reported-by: NHyeonkook Kim <hk619.kim@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds support for EXYNOS5440 SoC which is including
ARM Cortex-A15 Quad cores.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add check for pci_ioremap_bar failure
Signed-off-by: NMatt Schulte <matts@commtech-fastcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards
Signed-off-by: NMatt Schulte <matts@commtech-fastcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add XR17D15x devices to the exar_handle_irq override: they have the
same extra interrupt register that could fire and never be serviced by
the standard handle_irq.
Signed-off-by: NMatt Schulte <matts@commtech-fastcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add sleep capability to XR17D15X ports
Signed-off-by: NMatt Schulte <matts@commtech-fastcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add initialization of sampling mode and tx/rx triggers to pci_xr17v35x_setup
Signed-off-by: NMatt Schulte <matts@commtech-fastcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Optimization: check for presence of UPF_EXAR_EFR flag before serial_in
Signed-off-by: NMatt Schulte <matts@commtech-fastcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

set_termios may be invoked before the former data transfer is completed.
Block until the tranfer is done.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for new devices: Exar's XR17V35x family of multi-port PCIe UARTs.
Signed-off-by: NMatt Schulte <matts@commtech-fastcom.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Acked-by: NTobias Klauser <tklauser@distanz.ch>
Cc: Lucas Tavares <lucaskt@linux.vnet.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Tony Prisk <linux@prisktech.co.nz>
Acked-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_HOTPLUG is going away as an option so __devinitconst is no
longer needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_HOTPLUG is going away as an option so __devinitdata is no
longer needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Lucas Tavares <lucaskt@linux.vnet.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Tony Prisk <linux@prisktech.co.nz>
Acked-by: NTobias Klauser <tklauser@distanz.ch>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Lucas Tavares <lucaskt@linux.vnet.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Tony Prisk <linux@prisktech.co.nz>
Acked-by: NTobias Klauser <tklauser@distanz.ch>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Only we meet the following conditions, we can enable the DMA support for
auart:

  (1) We enable the DMA support in the dts file, such as
      arch/arm/boot/dts/imx28.dtsi.

  (2) We enable the hardware flow control.

  (3) We use the mx28, not the mx23. Due to hardware bug(see errata: 2836),
      we can not add the DMA support to mx23.
Signed-off-by: NHuang Shijie <b32955@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The current mxs-auart driver is used for both mx23 and mx28.

But in mx23, the DMA has a bug(see errata:2836). We can not add the
DMA support in mx23, but we can add DMA support to auart in mx28.

So in order to add the DMA support for the auart in mx28, we should
distinguish the distinguish SOCs.

This patch adds a new platform_device_id table and a inline function
is_imx28_auart() to distinguish the mx23 and mx28.
Signed-off-by: NHuang Shijie <b32955@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Allows overriding default methods serial_in/serial_out.

In such platform specific replacement it is possible to use
other regshift, biased register offset, any other manipulation
that is not covered with common default methods.

Overriding default methods may be useful for platforms which got
serial peripheral with registers represented in big endian.
In this situation and assuming that 32 bit operations / alignment
is required then it may be useful to swab words before/after
accessing the serial registers.
Signed-off-by: NNoam Camus <noamc@ezchip.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The definitions provided by serial_at91.h are only used by the
atmel_serial driver, and the function that uses it is never called
from anywhere in the kernel.  Therefore, these definitions are unused
and/or obsolete, and can be removed.
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This is really driver platform data, so move it to the appropriate
directory.
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

In the previous commit, console write function (serial_console_write)
is changed to disable SCI interrupts while printing console strings.
This introduces possible race cases in the serial startup / shutdown
functions on SMP systems.

This patch fixes the sh-sci in the same way as commit 9ec1882d
(tty: serial: imx: console write routing is unsafe on SMP, from
Xinyu Chen <xinyu.chen@freescale.com>, 2012-08-27) did.

There could be several consumers of the console,
* the kernel printk
* the init process using /dev/kmsg to call printk to show log
* shell, which opens /dev/console and writes with sys_write()

The shell goes into the normal UART open() and write() system calls,
while the other two go into the console operations.  The open() call
invokes serial startup function (sci_startup), which will write to
the SCSCR register (to enable or disable SCI interrupts) without any
locking.  This will conflict with the console serial function.

Add spinlock protections in sci_startup() and sci_shutdown() properly.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Symptom:

When entering the suspend with Android logcat running, printk() call
gets stuck and never returns.  The issue can be observed at printk()s
on nonboot CPUs when going to offline with their interrupts disabled,
and never seen at boot CPU (core0 in our case).

Details:

serial_console_write() lacks of appropriate spinlock handling.

In SMP systems, as long as sci_transmit_chars() is being processed
at one CPU core, serial_console_write() can stuck at the other CPU
core(s), when it tries to access to the same serial port _without_
a proper locking.  serial_console_write() waits for the transmit FIFO
getting empty, while sci_transmit_chars() writes data to the FIFO.

In general, peripheral interrupts are routed to boot CPU (core0) by
Linux ARM standard affinity settings.  SCI(F) interrupts are handled
by core0, so sci_transmit_chars() is processed on core0 as well.

When logcat is running, it writes enormous log data to the kernel at
every moment, forever.  So core0 can repeatedly continue to process
sci_transmit_chars() in its interrupt handler, which eventually makes
the other CPU core(s) stuck at serial_console_write().

Looking at serial/8250.c, this is a known console write lockup issue
with SMP kernels.  Fix the sh-sci driver in the same way 8250.c does.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>